TyphooN CyanogenMod 7 Quadrant Score HD2 - HD2 Android Q&A, Help & Troubleshooting and Genera

In quadrant I got only 1200 Score even when i OC to 1,2 Ghz. Why is my score so low? Ive got the TyphooN CyanogenMod 7.0.2.1 v3.1.3

Pietar said:
In quadrant I got only 1200 Score even when i OC to 1,2 Ghz. Why is my score so low? Ive got the TyphooN CyanogenMod 7.0.2.1 v3.1.3
Click to expand...
Click to collapse
I get 1418, did you set the governer to performance too?

is your device not performing fast eough or are you just rely on an artifical benchmark to test performance?

Related

setcpu long bench very high

when i run long bench with setcpu i'm getting results in the 3,000's. this is rather high isnt it? i'm running damage control 3.2.3 with ffolkes normal volt kernel. any advice with this would help, thanks!
edit - errr should've posted in the Q&A, my apologies.
Just ran on mine with:
BB v0.4
Samdroid JIT
nova fps fix
1190MHz OC
score: 724ms
Linpacks avg around 21

[Research]Mhz vs Quadscore/LinPack #Update

Mhz vs Quadscore on [beta] desire hd2 #Update
hey here same interesting tests i did
if i locked my phone in power saving mode u get
CPU and Score
Mhz ScoreA CPU Mem IOps Linpack
256Mhz 900 1750 525 1600 11
384Mhz 1050 2580 618 2000 16
460Mhz 1350 3000 990 2600 19
500Mhz 1600 3250 1050 2800 20
768Mhz 2200 4600 1120 3500 29
1000Mhz 2500 5400 1120 4150 35.5
1200Mhz 2700 6200 1120 4380 40
maybe there could be another mode that will use
500mhz most of the time [for normal using or one app using Cpu]
and when playing or using heavy 1000Mhz
[Dev]
i see that memory score is not linear
maybe could fixed by our greatest devers
I hope u do understand that these results are total bullcrap.
The newest dual core chips dont even get 2.7k scores in that benchmark.
Something in the desire HD build farks up the scores simple as that.
If you look at the quadrant advanced score, you'll notice it only gets those scores because of the I/O score. The processor one is about the same or a little more than teh Nexux 2.2, so if you underclock to 500 mhz you may get a total of 1600, but your processor score will suck badly and your phone will lag and really suck.
Keep your max at 998 and your min at 245 and use smartass and you should be fine.
orangekid said:
If you look at the quadrant advanced score, you'll notice it only gets those scores because of the I/O score. The processor one is about the same or a little more than teh Nexux 2.2, so if you underclock to 500 mhz you may get a total of 1600mhz, but your processor score will suck badly and your phone will lag and really suck.
Keep your max at 998 and your min at 245 and use smartass and you should be fine.
Click to expand...
Click to collapse
Agree.
Sent from my HTC HD2
orangekid said:
Keep your max at 998 and your min at 245 and use smartass and you should be fine.
Click to expand...
Click to collapse
+1 for this.
My HD2 has been running smoothly with 245-998MHz smartass for weeks now, battery life has been great too.
i update it with more info check post1
i see that memory score is not linear
maybe could fixed by our greatest devers
Quadrant scores are useless. RUn it, then run it again, you'll get different results.
I don't use SetCPU at all, it's just not needed.
According to my Quad Test im getting a total of 2196 with 245-998mhz with smartass on SetCPU my CPU: 4450 Mem: 1127 I/O: 4716 2D: 273 3D: 412 Work that one out

[Q] HD2 Max Safe OC!?

Helloooooo community!
I have a question...
I'm using HD2 with nand android and the rom
MDJ's CyanogenMod 7 v. 2.6
I installed the SetCPU and I managed to OC my device @ 1536MHz
I stess tested and it is stable, plus I'm using it for 2 days now!
stock temps after stress test: 33c
OC temps after stress test: 35-37c
My question is, is it safe to leave it as it is?
Cause according to temps, I don't think I have problem...
Also my profile is "On Demand"
Max: 1536MHz
Min: 245MHz
Thanks!
Hi,
From what I understand, on demand will not OC your CPU to 1.5 ghz, but use the CPU according to the performance it requires. If you use really intensive apps, CPU *might* go to 1.5 ghz, but it really just raises about as high as what's being used. I wouldn't recommend 1.5 ghz OC on your phone for a long term use. You never know what might happen.
Alot of people do it though, but my phone isn't stable at 1.2ghz so I'm not one of them.

question reguarding overclock rom

hi, i've got a htc wildfire.. well obviously considering i'm posting in this section
anyway, i've installed wildpuzzle 0.8 with the overclocking kernal, what i'm wanting to find out is....
when running setcpu, the cpu will change it's frequency depending on usage.
but what about if setcpu isn't installed and you use the rom to overclock to say 748.. will the cpu stay at 748 permanently, or will it drop down and up natively depending on usage, like setcpu does??
thanks
i would say without set cpu or a specific speed framework, it would revert back to standard 528max 480min
which overclocking kernel have you got, be aware that if you have 130 kernel and overclock, wifi hotspot will not work, you can see phone but you won't be able to connect, you need to use 055 kernel from wildpuzzle 8.0.11 thread.
a small side note, i have just recently changed my overclocking from 691max to 652max, no discernable difference in speed, linpack for 691mhz was 2.9, for 652mhz i'm still getting 2.8 mflops, but huuuuge difference in battery life.
691 max struggling to get 2 days, 652 max after 24 hours i still have 82% battery left.
how do you see this mflops thing? and is it like a cpu score?
subwars said:
how do you see this mflops thing? and is it like a cpu score?
Click to expand...
Click to collapse
Download Linpack For Android from the market, and, Yes, in a way, it is like a CPU Score.

Overclocking experiences

I figured this is the correct forum since it's related to the overclockable kernels?
Well anyway here's my experiences overclocking the U8800 (with geno's cm7 and oxygen I get similar results)
smartass governor 245MHz-1516Mhz
-----------------------------------------
About 2400 on Quadrant standard after a few runs. Stable (I don't remember any reboots atleast
ondemand governor 245Mhz-1516Mhz
------------------------------------------
About 3000 on Quadrant standard after a few runs sometimes, sometimes it won't get higher than 2800. Some freezes / reboots.
interactive governor
-----------------------
The strange thing is that the phone freezes if set the max. clock >1100Mhz with this governor. The phone runs fine for atleast ~5mins (haven't tested it for longer periods) even with the performance governor and max. clock 1516Mhz. (max. clock all the time). Anyway with interactive 245-1100 I get about 2400 in Quadrant if I remember correctly.
Anyone else been testing different OC settings? The strange thing with smartass is that you don't seem to get max. performance with it (3000 quadrant with ondemand vs. 2400 quadrant with smartass). I know there's a lot of stuff happening in the background which causes different results, but the difference is big. Could it be that smartass is is not giving max. performance because the temp is rising too fast or something? But on the other hand the score never is higher than 2400 even if the battery temp is 20C or something.
Also the interactive governor freezing if max. clock is above 1100Mhz is strange.
Oh yeah and the highest battery temp I've had is 41C, after which the phone froze (ondemand 245-1516).
ksatta said:
I figured this is the correct forum since it's related to the overclockable kernels?
Well anyway here's my experiences overclocking the U8800 (with geno's cm7 and oxygen I get similar results)
smartass governor 245MHz-1516Mhz
-----------------------------------------
About 2400 on Quadrant standard after a few runs. Stable (I don't remember any reboots atleast
ondemand governor 245Mhz-1516Mhz
------------------------------------------
About 3000 on Quadrant standard after a few runs sometimes, sometimes it won't get higher than 2800. Some freezes / reboots.
interactive governor
-----------------------
The strange thing is that the phone freezes if set the max. clock >1100Mhz with this governor. The phone runs fine for atleast ~5mins (haven't tested it for longer periods) even with the performance governor and max. clock 1516Mhz. (max. clock all the time). Anyway with interactive 245-1100 I get about 2400 in Quadrant if I remember correctly.
Anyone else been testing different OC settings? The strange thing with smartass is that you don't seem to get max. performance with it (3000 quadrant with ondemand vs. 2400 quadrant with smartass). I know there's a lot of stuff happening in the background which causes different results, but the difference is big. Could it be that smartass is is not giving max. performance because the temp is rising too fast or something? But on the other hand the score never is higher than 2400 even if the battery temp is 20C or something.
Also the interactive governor freezing if max. clock is above 1100Mhz is strange.
Oh yeah and the highest battery temp I've had is 41C, after which the phone froze (ondemand 245-1516).
Click to expand...
Click to collapse
Very odd !
Well I can say my highest temp I reached was ondemand 245-1516 is 39 degree celsius feels nice to hold it great heat warmer at winter !
Quadrant is poop, you should use AnTuTu.
I'm using Oxygen with franco.Kernel+ZRAM and overclocked to 1,8GHz, governor is SavagedZen. Here is what I got:
Quadrant: 3533
AnTuTu: 4327
Attached screenshot of Quadrant but forgot to take screenshot off AnTuTu But I fortunately submitted that score, so you can check it with the AnTuTu app if you don't believe.
Pelemane said:
Quadrant is poop, you should use AnTuTu.
I'm using Oxygen with franco.Kernel+ZRAM and overclocked to 1,8GHz, governor is SavagedZen. Here is what I got:
Quadrant: 3533
AnTuTu: 4327
Attached screenshot of Quadrant but forgot to take screenshot off AnTuTu But I fortunately submitted that score, so you can check it with the AnTuTu app if you don't believe.
Click to expand...
Click to collapse
What oxygen version are you using?
d3xtr0 said:
What oxygen version are you using?
Click to expand...
Click to collapse
110809 but franciscofranco said it isn't smart to use his kernel with that version. So I restored backup and I'm waiting for update to franco.Kernel now.
Pelemane said:
110809 but franciscofranco said it isn't smart to use his kernel with that version. So I restored backup and I'm waiting for update to franco.Kernel now.
Click to expand...
Click to collapse
I've done that too.. xD
Now I have near 3000 on antutu with smartass 400~1300
Pelemane said:
110809 but franciscofranco said it isn't smart to use his kernel with that version. So I restored backup and I'm waiting for update to franco.Kernel now.
Click to expand...
Click to collapse
d3xtr0 said:
I've done that too.. xD
Now I have near 3000 on antutu with smartass 400~1300
Click to expand...
Click to collapse
Yeah I guess I'll wait too. Feeling a bit lazy today
Looks like smartass has similar score drops on antutu compared to ondemand. So I'll just keep it ondemand and 245-1500 for the moment. When the new kernel is released I'll try 1800
I'm running the latest (110811) Oxygen with its own kernel. 3300'ish points from Antutu and 2400'ish from Quadrant. Seems pretty standard. Gonna also try 1800 when franco gives us update.
EDIT: And clocks were 1516 Mhz and ondeman governor. Smartass gives a lot smaller results for me too. Only about 1800 in quadrant with smartass
Cinthiar said:
I'm running the latest (110811) Oxygen with its own kernel. 3300'ish points from Antutu and 2400'ish from Quadrant. Seems pretty standard. Gonna also try 1800 when franco gives us update.
EDIT: And clocks were 1516 Mhz and ondeman governor. Smartass gives a lot smaller results for me too. Only about 1800 in quadrant with smartass
Click to expand...
Click to collapse
Have you had any freezes/reboots with ondemand 1516? I had quite a few and then changed back to smartass. The temp was around 37C so that shouldn't have been a problem. I haven't tried ondemand on the newest oxygen so it might work better now. It might have been the 2g/3g freeze with the earlier oxygen.
ksatta said:
Have you had any freezes/reboots with ondemand 1516? I had quite a few and then changed back to smartass. The temp was around 37C so that shouldn't have been a problem. I haven't tried ondemand on the newest oxygen so it might work better now. It might have been the 2g/3g freeze with the earlier oxygen.
Click to expand...
Click to collapse
Yeah it freezes randomly. I did 3 runs on antutu and 2 runs of Quadrant succesfully and then left my phone on a table. After a little while the phone rebooted itself. So it rebooted when it at least should have been running 245Mhz. I didn't check my battery temperatures but it didn't feel even warm in hand when reboot happened.
Btw, I accidently thanked you for the message when I tried to quote.

Categories

Resources