Hi,
I'm trying to break the simlock application, however after having tried two times the time-out is quite annoying
I can bypass the time-out, but I really don't feel like trying 99 times and having to wait AGES when I want to unlock it legally
Would anyone know how to reset this number (eg. flashing radio ROM?) ?
Thanks,
TB
Hi there. How did you manage to bypass the time-out? I am stuck on "you have tried xx times, please wait until timeout." Problem is, its not timing out.. its been 2 days.
Hey, I tried the wm6 update and tried it, its prepared, the % came up then stopped and told me
The update utility cannot be used on your pda phone. please check your update utility.
Im using activesync 4.5 and my phone is uk t-mobile ameo.
There is now no software on my phone and i cannot use it?
please can someone help even to get it back to how it was?
thanks
matteus
i am not expertised on this matter but:
- did you unlock your device?
- have you tried other roms?
- did you hard reset manually it?
hey, no i didnt unlock it i realised that now. i want to reflash original rom (where can i get?) then unlock an update. i miss it already
hard reset manually will help, then you try to upgrade.
i done a hard reset many times. the 'press cennter key to reset' comes up, i push it an bak square 1. where can i get orig tmobile rom??
i'm pretty sure that the link to your rom has already been posted here several times, but i can only find the german tmob rom.
check some of the big threads about wm6 and unlocking
Hello everyone here:
I have bought a Cinglar 8525 about 3 month ago. Because enthusiasm of flashing rom, I start to flash rom one week after the purchase.
I flashed the hard spl v7,and flashed new OS rom image.
During the flashing, nothing special happened.
After two months usage, one time a software stopped responding, I thought it might be network failure or something like that and simply reset the device,then the nightmare began.
The device boot into bootloader automaticlly without the pressing of OK and Power button.I tried to reset the device by push the reset pin but it does not work, the device always boot into bootloader, after a few step of tring, it turns out the device maybe dead and I pull off the battery to make the device totally shut off, then install the battery again, and leave the device black screen.
After some time, I reset the device again , it boot into the OS this time. After some configuration that need reset , I reset the device ,but again ,it boot into bootloader.
So my device is very unstable now, even "fragile". Boot, maybe into OS, maybe into bootloader.
Can someone explain this? Or help me solve it?
some addional information:
I have flashed using card-flash method with the Manufacture Traditional Chinese Version( I came from China and the phone is origionally unlocked and I have hardspl v7 on it ).
After the flash ,the device can boot into OS this first time I reset the device, but after second reset,it still goes into the bootloader.
After a long time, I plan to flash one of the cooked ROM when I purchase the device, and ready to return the device the the seller to sort it out. But after this flash, the device just RETURN to normal ! I think it maybe back in normal and I have no execuse to return the device.So I start to use it normally.
After half a month of usage , the "bootloader mode" came again,similar steps to last time it "crash" ( device halt, reset, boot into bootloader ).
May someone diagnose this?
You're running wm6.1, aren't you? Try wm 6 as its more stable or if you wanna stick with 6.1 try PDAViets roms (19701 or 19900). They're english though....
Please note the "unstable" I mentioned is not something like halt frequently,application auto close up,etc.It's the bootloader stuff.
But I thought the problem might be irrevelant to the OS version, the "crash" occur first time when I use a ROM of wm6.0 and "crash" second time when I use a ROM of wm6.1
do some reading on wm6.1, it causes stuff like what you are describing....
After deep search in my brain, the "crash" might be occured during two version of ROM and both with wm6.1 .
Can you provide some link describing this problem of wm6.1 ? I just wondering if it is my device hardware failure or not.Or due to my some improper operation during ROM flashing process. Thank you.
Use the search function. There are a heap of threads... Some people recommend flashing a stock rom THEN flashing the wm6.1 of choice. This DOES seem to fix the problem.. Cheers...
yinx said:
some addional information:
I have flashed using card-flash method with the Manufacture Traditional Chinese Version( I came from China and the phone is origionally unlocked and I have hardspl v7 on it ).
After the flash ,the device can boot into OS this first time I reset the device, but after second reset,it still goes into the bootloader.
After a long time, I plan to flash one of the cooked ROM when I purchase the device, and ready to return the device the the seller to sort it out. But after this flash, the device just RETURN to normal ! I think it maybe back in normal and I have no execuse to return the device.So I start to use it normally.
After half a month of usage , the "bootloader mode" came again,similar steps to last time it "crash" ( device halt, reset, boot into bootloader ).
May someone diagnose this?
Click to expand...
Click to collapse
Please note this, I have done it before, I 'll do some search work.
Is there some evidence or something that the 6.1 rom of 19701 kernel has solved this problem ? I really like the thread function in SMS message in 6.1 so I want to stick in wm6.1 .
I have honestly only had problems with th 19919/19202 versions of wm 6.1. Tried 19900 with no problem and REALLY liked the speed. 19213 is SLIGHTLY faster and again no problems. Try ne of these if you MUST have wm6.1. The stability seems to get better and better as the chefs progress up the versions. Cheers...
Untill now I can't get my phone out of bootloader, I've flashed many ROMs including manufacture shipped ROM, but the phone still remain in one screen.Wondering if it can work out. Frustrated....
Start from 9:00 this morning I kept flashing my phone with different version of ROM, try to get out the bootloader,but still not working.
After a reset of frustrating "not working", I put down the phone,and do some other job,when I came back,I have transfered another ROM to the microSD and ready to flash the ROM.Before flash I thought "may I reset the phone again? may be the bootloader will go away", then I reset the phone as normal, after a while , the splash screen appear! I enter the OS, thinking the bootloader problem has go away. But when I complete some setting and reset the phone again, the phone finally fall in bootloader again.
So what ......
check for bad blocks using MTTY.... On upgrading section.
Cheers...
This I also have tried out. But I see no bad block on it, and I even do a forcibly fix to the NAND and with no avail.
I have sent the phone to a service center, it is said they might going to change a chip on the phone.
Wish my phone good luck.
I'm hoping somebody here can help, because I'd hate to have to get rid of a device that I really love...
Used Helmi's WM6 (http://wiki.xda-developers.com/index...angel_WM6_Home) to upgrade from WM2003SE and everything was working beautifully!
I was absolutely LOVING the new software until my device just stopped accepting the passcode that I had been using for 2 years. What I don't understand is I had to use the passcode a few times after the upgrade and all was fine. What could have happened for it to suddenly change by itself (because I know it wasn't me)?
Someone at the PocketPCAddicts forum suggested that I locate an original factory ROM to wipe out everything on the device and try again from scratch. I've searched the web looking for such a beast and can't find one (since the manufacturer/carrier no longer support it).
Can someone here help?
Debbie
Had the same problem...
Hi Debbie,
Same thing happened when I upgraded from WM2003 to the WM6 ROM. Unfortunately there was no solution and I just ended up disabling the password to ensure I never got stuck.
If you ever stumble upon a solution that works for you, I'd be happy to hear about it!
I'm about to try out the latest WM6.11 and hope it will have that particular issue solved - I'll let you know.
Ken
if you press and hold power+record+camera the same time and then reset you get to the boot loader.
you will see the 3 options, which i have fogotten, but if you put in the same options as instructions tell you after flashing a new rom, then push the mail button i believe, it will format you memory and you will be able to get back in again.
i had the same problem where i was locked out and i did that and just sync'd again to get back to my positon prior getting locked out.
hope that helps
Thanks, I will try it again.
Should I be able to simply repeat those steps, or should I start from the beginning? I don't have the device with me right now.
Thanks again,
Debbie
follow the instructions after the flashing the rom stage all the way to the end.
you choose to format memory on the gray screen with 3 options.
i flashed the wm6.1(5.2.19716) several days ago, and tested in several situations, my BA can remember the pw now, thanks for the hardwork of rom maker.
Thanks! (Now Internet Problem)
I got it to finally work, after getting a 3rd hand to help in the key combination/timing.
Only problem now is that my SX66 no longer connects to the Internet. Tried every setting/CAB I could find and no dice. AT&T tech and advanced tech support didn't help and I was told that the OS may have corrupted the connectivity.
Should I try loading another WM6 version?
Thanks again,
Debbie
I would like to update the OS to build 7.0.7008 or change the rom. There is any way to backup the activation so is no need to do it again after the update?
Just use the same code after upgrading, no need to call ms for a new code .
But I believe I can use it only 3 times. If that true?
No, You can use it as many times as you want as long as it's your device and one ID
I have used my code over 20 times right now, and it is still working chill out bro'. It will work.
Thank you very much, I will try it!