Database Users

XDAIIi New ROM from O2 and xdaforum, both fail with ERROR114

Hello Guys,
Disaster. I tried updating to the new ROM from the O2 website and it fails with : "ERROR114....
Tried the version from this great forum and guess what? same error.....
HELP !!!!!!!!!!!!!!!!! :shock: :shock: :shock:
My XDAIIi was brill. Now its dead...

Try putting the 2i into bootloader mode by pressing the power button, action pad down and the reset button at the same time. The screen will say serial with a version number at the bottom. When you connect it to your computer this should change to USB. Then try running the update again.
If you are using the modified version I posted on this site then the install will fail. Just run the program MAUpgradeUT_noid.exe a second time without touching the 2i at all.
Hope all goes well.

Hi Pug,
Unfortunaely that has not work. see screen shots attached.

can anyone tell me what this damn error is pls...............
oh by the way the iMate PDA2 rom fails as well with the same error. !!

If both your devices are failing to upgrade the problem must lie with your computer somewhere.
Are you using firewalls like zonealarm which may be interfering with the update process. If so try disabling them.
I assume you are connecting using USB and not serial. Do so if for no other reason than it's faster.
Are you using Activesync 4? More stable for upgrading than 3.8 but lacks sync over LAN feature - not a great deal if you've never used it. You can find this on the wiki link top left of this page.
Try downloading the packages again. I've posted the radio rom here as thats the one you seem to be having immediate problems with. Download it and overwrite the one on my modified rom.
I'll post more if I think of anything as I'm suffering a hangover right now and can't think too much cos it hurts. :?

thnx pug,
really appreciate your help. yes iam running firewall (norton). I will try your modified radio and advise. fingers crossed. and thnx once again.
using activesynch 4 as well from this forum

Hi pug,
Sorry the radio did not work. renamed the radio and ran update and the update works for nk.nbf and ms.nbf files. without radio the phone does not work but proved that there is no problem with my pc or usb cradle etc. the problem is the radio.
my IMEI is 354962000270150.
the radio file from the Launch rom from O2 does not work, so either my IIi has a damaged component or something else that I am not aware of.
copied your radio file to the other iMate upgrade and it still fails with the same error 114 !!
Any other ideas or suggestions pls, its really depressing to loose the XDAIIi permanently.

Oh I forgot to mention that the IIi is also unlocked and the ExtROm is unlocked as well. Will this make a diffeence?

The fact that the 2i is unlocked won't make any difference. The EXTRom on the 2i can't be unlocked and always results in the storage being locked which will stop the phone being updated. Maybe not at the actual update stage but certainly further down the line after the hard reset.

Ok now I have have tried various things as posted in this forum in various sections. Still get the same error.
Originally about 3 months ago, I had to hard reset, then I used the Launch ROM from the O2 website. I still have that original exe but that also NOW fails. I am now running out of options.
Any other ideas?

It might be that because you have unlocked the Extended ROM that it causes this fault, either that or you device has an internal problem which you cannot fix.
Take it back to the shop they will replace it.

114 error
I got my XDA2i back from O2 after a warranty mainboard replacement and decided to upgrade with the new O2 rom..horrors.. I got the 114 error and repeated efforts failed to cure it. I then inatalled a/sync on another PC and ran the upgrade from there...
Bingo! it worked..always worth a try if things defy logic.
Probably an old firewall that didn't uninstall properly.
One thing though, does anybody know when my backup battery will kick in and charge.
It arrived back from O2 completely dead but even with the main battery full it doesn't want to take a charge yet??

Hitla
Just humour me and try the radio upgrade on another PC... That's how i got round my 114 error

To all the people who have advised me... thank you.
I have tried the upgrade on 2 other laptops I have, one with Activesync 4 and one with Activesync 3.8.
AND..... the same failure error.
I have now taken it back to O2 and they have taken it in for repair !!
Should rcv it back next week hopefully repaired or replaced !!
Will keep you guys posted.
Once again great forum and great posters with serious technical advice.
Well done keep it up.

Soory guys,
Have been away for the last few weeks, so unable to update you all.
Well O2 replaced my device. It has the new ROM but the old radio !!
I would like to thank all of you advised me.

Hi,
I just downloaded the O2 Rom-Upgrade.
To keep my 2020i in German I only did a Radio-Update from 1.02 (ran the installer and copied the files to a different directory together with the AllUgrade kindasomething.....)
The update worked, it always worked this way, but after the update the Radio showed up as 1.00.00 (MUST be 1.03, at least that is what o2 says....)
Any idea?
Thanks, Günter
P.S.: I should add that the phone works..

Qwest Mogul - Need GPS Navi. but am very confused..

Hey all,
Not new to electronics, but am very new to the Mogul and PDA/Pocket PC flashing..
My new Qwest Mogul will arrive tomorrow and, from what I've read, GPS is not enabled out of the box.. I've been reading that I can re-flash the device to somehow enable the internal GPS chip for use with my TomTom Navigator 6 s/w, but can't figure out how exactly to do it, and I don't want to jump into it and brick my new Mogul.
Right now I've got DCD_3.0.1_Qwest.exe which I picked up here (thanks, by the way!) but I'm not sure what to do with it, and (maybe I'm blind, but..) I can't seem to find a tutorial on how to use it with my Qwest Mogul..
If possible, could someone guide me through the steps on getting my Mogul setup so I can use get this GPS chip enabled?
Also, will I be losing any functionality re-flashing my Mogul? Will it 'look' any different?
Again, sorry if I sound like an idiot to you guys.. but I'd like to learn how to do this so I can quit bugging everyone about it haha
TIA,
-mak

http://forum.xda-developers.com/showthread.php?t=376150
should have what you need to know.
Basically:
Run the 2.4 unlocker
Run the official ROM w/ Radio
Flash the dcd_qwest ROM

Thank you very much!
So the instructions you've posted will, in fact, work for the Qwest Mogul to unlock/enable GPS Navigation?
-mak
EDIT:
Also, there are some things in that list of 'Removed' items that I would like to keep, such as; Entertainment (Games), Adobe Reader, etc.. I'm assuming the reader can be downloaded from Adobe, but how do I go about getting the games back?
I've now got the following, please let me know if it's everything I need, and what exactly each item is;
DCD_3.0.1_Qwest.exe
dcd_titan_kitchen_3.0.1.rar
titan_SPL_2.40-olipro.exe
As for the radio, it says it's included with the official Sprint ROM, do I use the Sprint ROM on my Qwest Mogul???

Please test it first
Just a recomendation here, but just in case you get a defective one you might want to not touch the ROM for a few days and put it thru the paces. If you get a bad one it is always best to know before messing with it. Afterwards, the 3.01 is a good ROM, but a bit tricky even for the experienced because things are not quite ironed out with the radio and serveral experienced people have injured their units, so I would recomend 'cutting your teeth' on 2.3.2, as it worked really well for me and is pretty cut and dried and the process is stable. In order to get the apps you want like acrobat and games you can use the kitchen and get them in there.

You also won't need the kitchen (i'd worry about that later, to be honest, not good to "cut your teeth" with a kitchen).
You do need the offical sprint ROM, since it includes the radio.
If i recall correctly from when i flashed my friend's qwest 6800, I did this:
olipro's 2.40
Offical sprint rom [when the customizations come up (ie. tap screen to begin), i flashed the DCD 3.0.1 qwest rom.
But it's been a few days so i'd search around here and on ppcgeeks to double check.
As madman said, however, I'd put the phone through the paces for a few days to make sure all is well. Run some benchmarks and such to put a strain on it. If you flash and figure out you have a bad phone...well, you're out however much you paid for it.
Good luck and welcome to the fun

Thanks guys, I think I understand now
I'll keep my Mogul stock for a bit to make sure everything is good, but Qwest offers an exchange for the phone if it's defective, and I have handset insurance in case it gets 'lost'.. so I'll be covered for the future there.
So am I correct to assume I should do the following;
Install titan_SPL_2.40-olipro.exe
Then install Official Sprint ROM w/ Radio (where can I get that, or do I already have it??)
Then, during customizations, shut the phone down and install DCD_3.0.1_Qwest.exe, or an older version that might be less buggy?
If I do the above, it will unlock GPS on my phone? ..in the end, other than some applications, will I lose any functionality (e.g; Text Messaging, WiFi, etc)?
Thanks again,
-mak

http://download.america.htc.com/RUU_...CS_AM_Ship.exe
that should do it
shouldnt lose any functionality, make sure you write down all the information and such about msid, mdn, etc. Should be a post in here about that somewhere, I can find it for you on here for ppcgeeks if you need.
edit: it was in ppcgeeks:
http://forum.ppcgeeks.com/showthread.php?t=17667

The link provided is broken, is this the correct file; ftp://Mogulrom:[email protected]_RS_TITAN_3.35.04_4350H_SPCS_AM_Ship.exe

Here I go...
After reading this thread, I've decided to take the plunge and attempt the upgrade to my Qwest Mogul. Just to verify, I do the following:
Use Olipro 2.4
Flash to Sprint Upgrade
Flash to the DCD 3.0.1
Are there any codes or other information that I am going to need to write down before I start the procedure?

@ mak: yes, that's the right one, sorry, didnt check my links :/
@ reddhanky: read the PPCgeeks thread, dont forget to get the getspc program for your epst unlock code.

Psionfenix said:
http://download.america.htc.com/RUU_...CS_AM_Ship.exe
that should do it
shouldnt lose any functionality, make sure you write down all the information and such about msid, mdn, etc. Should be a post in here about that somewhere, I can find it for you on here for ppcgeeks if you need.
edit: it was in ppcgeeks:
http://forum.ppcgeeks.com/showthread.php?t=17667
Click to expand...
Click to collapse
The guide you linked to is still a little bit confusing for me, not sure why, but I don't see this part anywhere;
> g. click view info and Security. Write all these settings down.
I've taken note on everything else, and the A-Key didn't apply here since it was empty..
Help?
-mak
EDIT:
> h. click view info and select M.IP, again record these settings.
I have the following;
M.IP Settings
M.IP Default Profile
M.IP Customer Profile 1
M.IP Customer Profile 2
M.IP Customer Profile 3
M.IP Customer Profile 4
M.IP Customer Profile 5
Which one do I want to write down?

Managed to install olipro 2.40
But when I try to install the Sprint update (3.35), I get to the screen where it shows my current version (2.13) and to update to the sprint version... click next then next and the ppc reboots into bootloader, then the program crashes (ROMUpdateUtility has stopped working... A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.). Any ideas? I'm using Vista and have followed the instructions to the letter.

I dont run vista (usually i run linux actually, even successfully flashed in linux, i hate MS). But i'll look and see what i can find.
Is there a way to right click the RUU and choose compatibility as XP maybe?

tried compantibility mode XP SP2
Tried using compatibility mode but wouldn't work.

hmm
so you're in bootloader but can't run the RUU?
or you can't get into bootloader?

Success!
I've finally managed to upgrade my Qwest Mogul software to DCD's 3.0.1. The problem I had with updating to Sprint 3.35 was solved by right clicking on the install icon and setting the compatability setting to XP SP2 for ALL USERS (just changing it for the current user didn't work). Once I made the Sprint update, I entered bootloader mode ran the DCD rom and everything went smoothly.
Now to play with it and see how it works! I will update you guys to let you know how it goes.
Thanks to all, especially DCD and |||Bored|||, for the help with this process. It's been a bit nerve-wrecking for me, especially since I"m a Vista user on top of how few people have the Qwest Mogul. Again, THANK YOU, THANK YOU, THANK YOU, and did I say, THANK YOU!

Wow!
My Mogul seems to run much more smoothly (and dare I say it, FASTER) and after loading all my applications I am running at about 20MB free RAM. GPS works! I've been putting this darn thing through its paces and it hasn't crashed yet! So far, the sound through my Motorola s9 headset is working flawlessly...
Happy camper!

Qwest STock ROM
Been searching but can't find the stock ROM for the Mogul. Does anybody know where I can get it (just in case I ever have to send my mogul in for exchange/repair)?
Also, does anybody know if there is a way to put a shortcut on my Mogul to turn the GPS on and off?

Is the Internet working on your upgraded Qwest Mogul?
Reddhanky:
I also have the Qwest Mogul and tried to do the upgrade (as follows):
1) Flashed Olipro 2.4
2) Flashed Sprint ROM 3.35
3) Flashed DCD 3.01_Qwest
However, after the Sprint flash, I allowed that customizations to complete. When I went to DCD, everything worked ...except for the internet/data.
I went back and reflashed the Sprint ROM and just left it there. Again, everything but the internet/data is working (I can send/receive calls and SMS).
What's worse, I tried to downgrade back to Qwest 2.13 but do not seem to be having any luck (the ROM will install, but won't change the radio ROM ... then it just sits at the black HTC splash screen and won't boot).
Qwest is sending me a replacement phone, but before I send this one back (or brick the replacement), I'd like to know how things are working for you...
P.S.: If anyone knows how to downgrade the 3.35 radio ROM back to 1.40/1.47 on a Qwest Mogul, please let me know.
- [email protected]

Back to normal!!!!
Just an update:
I'm managed to get my phone back to the Qwest 2.13 ROM. As it stands now:
Bootloader/SPL: Olipro 2.40
Radio: Titan_1.47
ROM: Qwest_2.13
To get the radio ROM loaded, I had to go the SD route. Specifically, after installing the Qwest_2.13 ROM (and watching it freeze at the black 'HTC' logo page), I found a way to load the old radio ROM:
1) I formatted my microSD card as Fat32
2) Placed the 'titan_1.47.CDMA.nbh' file on it as "TITAIMG.nbh"
3) With the phone powered off (battery removed), I inserted the microSD card and entered the bootloader (held the 'power' + 'camera' + 'soft reset button' ... keeping the 'power' + 'camera' buttons held after releasing the 'soft reset'
4) When the bootloader came up, it prompted to load the 'TITAIMG.nbh' file. I hit the 'power' button as directed. After about 5-10 min, the upload succeeded and I hit the 'soft reset' again to reboot.
Some items to note when it came back up:
1) The MSL code I had no longer worked (I got it after I did the Sprint ROM upgrade). Fortunately, when working with Qwest, they gave me the MSL code
2) The MSID info was way off (not sure if it was because of the Qwest ROM I used, or all the crap I did trying to clear/access the extrom info)
In any case, after resetting some of the EPST info, the phone reset and worked exactly like it's supposed to.
Next Step:
A) Retry the Sprint ROM (this time I have my M.IP password!!!)
&/or
B) Don't play with the Sprint ROM and just use DCD Qwest_3.01
I'll post any success/failures. But rest assured, if you do decide to play around, there does appear to be a way to get back to the beginning
[email protected]

Please help..stuck in tri-color

Hello all,
okay, this is the history...
I just recently got a brand new mogul with windows 6.1 from sprint 2 days ago. Everything was looking smooth, however, internet sharing was a problem- i could no longer use the internet on my laptop through the phone. In the process of trying to figure out how to do a registry edit, i ended downloading TitanUnlocker.exe and ran the program.
The problem...
I am currently stuck in the tri-color screen with SPL-1.20 Olipro bootloader and no longer able to load anything else.
the radio roms that are suppose to function with this bootloader no longer exist (dead links at fileshex).
Please help!
Regards,
eastbay80

Update
OK, I went through a number of steps to get my phone back to stock. Thanks to the forum for the info. If you were in the same situation as I was and would like me to elaborate...i can..
regards
eastbay80

Possible Brick (8125) G4 - At Bootloader Screen

Resolved. Topic Can be Closed / Deleted.
Hello, I am new to the forums and new to reloading phones but fairly tech savvy otherwise.
I have a Cingular 8125 G4 Phone.
Current IPL/SPL
IPL 2.21.0001
SPL 2.21.0lip
-Can Access Bootloader Screen
-I successfully Unlocked it
-Updated the ROM to WM6
-Come to find it operated much slower then my WM5
-Tried a Different ROM
-Left the Room while it was uploading
-Cat attacked the cord or the phone
-Was Detached during the update process
-Rebooted Phone, stuck at the Basic Splash Screen
-Attempted to do a hard reset. Was able to access this screen, format, but would return back to flash screen and just sit there.
I have spent a couple hours going through the information on the forums but to no avail. I fear I have got a paper weight but was wondering if anyone had any suggestions.
Normally I would keep searching however this may prove to be time sensitive and need all the help
Thank you in Advance
Yours Truely
WTFPWN by Cat
Rick

As Murphy's Law would have it, soons as I post this I come across another post that told me to re-flash and for some reason after attempting to reflash 3-4 times, this time it appears to be taking it. I will keep you folks posted
However The link is broken for the official Cingular 8125 WM5 (What was shipped with the phone). If anyone has a link I would appreciate it if someone could send it to me. I will post once I have received.
Thank you very much.

Phone has recovered. However I would like to restore it back to Factory Defaults for reasons that are my own. I feel I can do it but do not have the Factory Image link.
The Following Link appears to be broken:
http://www.htcamerica.net/support/8125/software-downloads.html

This Topic Can now be closed I found the original Rom at
http://rapidshare.com/files/188635235/RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_cingular.rar
Found it after searching on the board for a while.
Adding Keywords for Search Engine to Pick up on so people having similar issues won't have to look as long as I did
AT&T 8125 G4 IPL&SPL
Version 2.25
Original ROM

it's hard to say what rom it had since i got it with wm6.5.
i found a link on this forum to a file called RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_cingular.rar
it seems to be one of the many originals, so i'll try to flash this one as soon as i can figure out the connection issue with ActiveSync. I tried both 4.0 and 4.5 but they both fail to connect i need to fix the pda's display (or wait until it solves itself, like the previous time) in order to troubleshoot the connection error

hi. I hapened for similar trance.
First download RUU_Wizard_Cingular_8125_WIZCNG01_G3_G4_2006_11_May_225_225_225111_22511102_022511_CWS_WWE_Ship2
(seek in google)
Second quit the battery (100% charged) and put again. Power the 8125.
Third reset your PC wihout the 8125 connected.
Fourth connect the 8125 and execute the file donwloaded.
I hpe to help.
(sorry my ugly english, I spoke español)

Yotaphone 2 reboots by itself after after the screen switches off.

Hello
I have a Yotaphone 2 running android 5.0. I have a huge problem with the device which is, that the phone reboots automatically all by itself after the screen turns off. The screen timeout is set at 1 minute and once the screen goes off, the phone reboots! I don't know what the problem is but its making me crazy!
Note: The phone does not reboot if the screen doesn't turn off. So I changed the screen timeout to 30minutes. Also note that Wi-Fi doesn't start immediately. It doesn't even start most of the time and is stuck at "turning on"! And also, the phone isn't detecting my SIM Card!
Hope someone can solve my problem.

Wow, seems a lot of problems here. However you provided very few info about your phone.
1) Where did you buy it?
2) What have you done after you opened it, OTA? Which firmware was installed?
3) Have you tried factory reset by wiping data in the stock recovery? (Accessible with Vol+ and Power)
4) Have you tried to flash from scratch the RU .124 firmware with YotaFlasher?
5) The phone was behaving normally before or it's doing this as soon as you started using it?

I got the phone as a gift
TheArt. said:
Wow, seems a lot of problems here. However you provided very few info about your phone.
1) Where did you buy it?
2) What have you done after you opened it, OTA? Which firmware was installed?
3) Have you tried factory reset by wiping data in the stock recovery? (Accessible with Vol+ and Power)
4) Have you tried to flash from scratch the RU .124 firmware with YotaFlasher?
5) The phone was behaving normally before or it's doing this as soon as you started using it?
Click to expand...
Click to collapse
-The phone was a gift from "Aramex Company".
-Yes, I have factory reset it! Note: It wasn't possible to reset it from settings because it would always get stuck in "Shutting Down" phase and nothing would happen. So I hard reset it.
-I found something strange going on though. Whenever I reset it, It would restart (after the reset is over) and say that "ANDROID IS UPGRADED TO 5.0".
I think it is upgrading by itself to 5.0.
-No, I haven't tried any flashing.
-Yes, the phone was working fine for a while and then started behaving like this!
Cheers!
(Thank You for your support and attention by the way)

Video
Hello!
I have made a video showing what the problems are! Please give me your e-mail so that I can send you the "Dropbox" link to the video.
Thank You!

I think the first thing to do here is to flash a clean firmware (RU or EU) on your phone via YotaFlasher, search here on xda how, and then report back if it's happen again! Seems that the firmware it was shipped with wansn't so stable.

Flashed it!
TheArt. said:
I think the first thing to do here is to flash a clean firmware (RU or EU) on your phone via YotaFlasher, search here on xda how, and then report back if it's happen again! Seems that the firmware it was shipped with wansn't so stable.
Click to expand...
Click to collapse
Hey!
As you had prescribed, I flashed it! First I flashed it with Android 5.0.0-ME1.1.60 and after opening the phone I used it for a while and the phone was same as before flashing! There was no difference at all! The phone was restarting on turning screen off as usual, the WiFi wasn't turning on, and the SIM wasn't being recognized!
But then I flashed it with Android 4.4.3-S01-003-ME1.0.3.61a and the phone is still rebooting by itself upon switching the screen off and the WiFi problem still persists! The WiFi just simply won't turn on. It's stuck at "turning on"! The SIM isn't recognized either! Also, the phone is restarting from the inside now (It wasn't restarting before. I had to keep the power button pressed every time I wanted to restart)! But NOTE that the phone still cannot be just shut down, it can only be restarted!
I don't know what to do!
Cheers

can you please help me find 4.4.3-S01-003-ME1.0.3.61a firmware. i tried yotaflasher and i cant make the program work. it exits close itself. i couldnt find any firmware folder in yotadevices ftp too. can you help me found the spesific firmware please?

Why are you unable to make yotaflasher work
lgk350tr said:
can you please help me find 4.4.3-S01-003-ME1.0.3.61a firmware. i tried yotaflasher and i cant make the program work. it exits close itself. i couldnt find any firmware folder in yotadevices ftp too. can you help me found the spesific firmware please?
Click to expand...
Click to collapse
Hi lgk350tr,
Why are you unable to make yotaflasher work, it is a pretty simple application. Have you tried to see instruction videos on YouTube on how to use it? Instructions are also available on XDA Developers' website. ( https://forum.xda-developers.com/yotaphone-one/general/yota-flasher-download-t3480922 )
Don't hesitate to contact, for any problem!
Cheerio

Please help..................I spent 800 USD on this phone and I can't use it
Can someone freaking help me with my phone's problem, I have spent 800 US Dollars buying that phone, and I can't even use it! It has been 6 months since I opened this thread and no one has helped me yet!
PLEASE HELP..............................................................:crying::crying::crying:

akahomeacc said:
Can someone freaking help me with my phone's problem, I have spent 800 US Dollars buying that phone, and I can't even use it! It has been 6 months since I opened this thread and no one has helped me yet!
PLEASE HELP..............................................................:crying::crying::crying:
Click to expand...
Click to collapse
Try flashing the hybrid modem mentioned in the general guide (Part 2).
Try flashing 2 times before rebooting.
If nothing helps, you could try lineageos, @angelll123 made a lengthy guide how to that in the post quoted here , also check my comment.

Is this what you mean?
tomgaga said:
Try flashing the hybrid modem mentioned in the general guide (Part 2).
Try flashing 2 times before rebooting.
If nothing helps, you could try lineageos, @angelll123 made a lengthy guide how to that in the post quoted here , also check my comment.
Click to expand...
Click to collapse
I have attached a screenshot of the Yotaphone 2 General guide page, I want to know if you are referring to the text that I highlighted in the screenshot!
Thank You

I do experience similar issue, but only recently. I haven't done anything like flashing or upgrading my phone, it started by itself .
I am experiencing reboots whenever battery drops below about two thirds of its capacity. Also, charging and handling some load prevents this.
Note that my Yotaphone has both displays damaged. Still working though.