[Q] X8 Mini CM6 1.0.0 Apps larger than 10mb - XPERIA X8 General

Ok... What am i doing wrong.
Completely followed instructions and have Baseband 015, 2.1.1.A.0.6 SE installed. http://forum.xda-developers.com/showthread.php?t=964223
Everything working, except one tiny little thing... Angry birds , ikamasutra, just wont install, they even wont download. It just show downloading for one second and then disappear.
Tried rebooting, formating sd card...
Any suggestions?

Pana_Ruplahlava said:
Ok... What am i doing wrong.
Completely followed instructions and have Baseband 015, 2.1.1.A.0.6 SE installed. http://forum.xda-developers.com/showthread.php?t=964223
Everything working, except one tiny little thing... Angry birds , ikamasutra, just wont install, they even wont download. It just show downloading for one second and then disappear.
Tried rebooting, formating sd card...
Any suggestions?
Click to expand...
Click to collapse
Try format the dalvik cache , partition cache or fix permission at xrecovery.

Great, worked! Thank you

Related

CM7 RC2 Problem - possibly gapps corruption?

Hey yall I'm having a problem with my Aria. I formatted my micro sd and wiped the phone to start with a clean slate. I downloaded CM7 RC2 from the CM website and i also downloaded gapps from there as well. but when i installed RC2 and gapps it would start up normally then when i would try to use the setup wizard it would freeze once i touched the android guy and would go into a boot loop. i recorded a video to help explain what im talking about. could it possibly be a corrupted version of gapps? cause i tried installing just rc2 and it worked fine....
http://www.youtube.com/watch?v=iZWiYGHh8LQ
Was it plugged in while in recovery?
yes and no. i didnt have it plugged in the first time around but the second time i did. and i did a factory reset, cleared the cache and the dalvik cache
Try re downloading the rom and gapps file. Make sure phone is unplugged and wipe data and caches again and then flash again. Ghats what I would do.
Army_Spec_Ops said:
Hey yall I'm having a problem with my Aria. I formatted my micro sd and wiped the phone to start with a clean slate. I downloaded CM7 RC2 from the CM website and i also downloaded gapps from there as well. but when i installed RC2 and gapps it would start up normally then when i would try to use the setup wizard it would freeze once i touched the android guy and would go into a boot loop. i recorded a video to help explain what im talking about. could it possibly be a corrupted version of gapps? cause i tried installing just rc2 and it worked fine....
http://www.youtube.com/watch?v=iZWiYGHh8LQ
Click to expand...
Click to collapse
Sounds like you might be using the wrong gapps. Double check you got the right one.
Sent from my Liberty using Tapatalk
You're almost certainly using the wrong Gapps.
Get the right one from here
http://wiki.cyanogenmod.com/index.php?title=Latest_Version

NexusHD2-CM9 broken!

Hey Guys!
I'm a bit new here, but I have register to become an answer to my question which I haven't found yet.
I've flashed my HD2 with tytung's "NexusHD2-ICS-4.0.3-CM9 V1.0" (with task29, radio reinstalled, hspl reinstalled, maglrd reinstalled & cwm reinstalled).
the problem is: after minutes of bootscreen I have to enter my Pin, I do.
There is given the text "Unlocking SIM" , while "he" do so, de screen turns black and I have to enter my Pin again and again. Sometimes he simply accept and go on, but then many process' crash! Process' like: android.process.acore , google.process.gapps, com.android.phone android keyboard ..
they all crash in a row and latest then I have to enter my Pin again.
Could anybody help me?
did you try to reflash the rom?
go to recovery, wipe data/factory reset & advanced -> wipe dalvik cache
after that, install the rom again.
I also have the issue that my phone stucks at the htc screen...i wait for 20 minutes now but nothing happens...i'll try to flash a bigger partition layout magldr...
Try the SD build
Hi, too bad you are having difficulty.
I am running the SD version of the same OS with do problem.
Two options:
Try the SD build:
http://forum.xda-developers.com/showthread.php?t=1437463
Just remember to rename the Folder to ICS, then tell MAGLDR to boot from SD / ICS
or try going back to a stable ROM, remove all PIN codes, then reinstall CM9
Good Luck
i have already removed all pin codes.
also i tried a full wipe with task29 and used the 250mb system partition because i read something about bad nand blocks.
earlier i tried to boot some sd builds that were made for boot with magldr, but without any success...if i go to the selection of the android sd folder in magldr it just pushes me back to magldr main menu :/
my hd2 is difficult to understand because it doesn't work as others do >.<
RichieGKB said:
did you try to reflash the rom?
go to recovery, wipe data/factory reset & advanced -> wipe dalvik cache
after that, install the rom again.
Click to expand...
Click to collapse
First: thanks, that there are people which consider to be with me with my problem
yea, i've already reflashed the rom (felt like 20 times!) ..
and I've actually tried to install no sd-version, I kept it as a loophole. ^^
Situation now: I've simply ignored the messages that every important process is going to die and just clicked the failures away. after that he wants to reboot, to get access to the mobile network --- I click "Reboot" und have now a Bootloop ...
i also tried another ics rom without cm9 and got the bootloop at the first boot...
I dont understand why no rom is running on my phone...
So guys !
I've done it ;D
Have simply used the sd-version and it works great!
@RichieGKB: If you have any question to the sd-version, message me !
Good post Charles, it helps me.
Seems to helps you too guys. Don't forget to hit thanks button!
i tried the full wipe and also a larger system and cache partition to get the rom working, but it still doesn't on nand.
I'm downloading the sd version at the moment, but this can't be the solution for the future :/
maybe i have to wait for newer versions of this rom
ah I solved the problem.
I didn't change the system partition layout in recoverys .cfg file. I didn't know that i have to do this because i thought it would be enough to install another version of magldr
@weedstar: Thats not the problems solution.. next time try to fix permissions via CWM. Sd version is slow. Nand is better.
Hf
Sent from my NexusHD2

[Q] Defy restoring itself to old ROM automatically!!!

Hi All,
I am new here and this is my first post. But i have been reading this forum for quite sometime and know that u guys are now my final stone. I am a proud owner of a Motorola Defy. And I am having this strange behavior, which is effectively rendered the phone almost useless. The phone is acting like its got a restore point in itself, and every time i restart.. it gets back to that point in time.
This includes app installs, uninstalls, stuff placed in system through adb push, theme, everything in the OS. I tried installing a different ROm through clockworkmod, but its not taking effect. Its saying install success but as soon as it restarts, its going back to the old ROM. (takes time to load, so i guess it reinstall back/restored the old version)
Details of device : I am from India and the phone was manufactured in India in around April/May 2011. Its a red lens Defy and and came with Eclair. I updated it officially to the first Froyo release for SEA region. After that i rooted the phone with superone click, and installed WIUI rom. I have been updating the ROM with newer versions around each month. The last one was 1.11.18 though as i waiting for a good ICS version to flash.
The problem occurred after i started installing some gold apps from getJar. It restated in between and install... and that point is kind of acting like a restore point even now.
Things I did: Tried installing different rom by CWM method. Reinstalling second init and CM, both old and new version. Tried restoring nandroid backup of my official ROM. Tried fixed and full sbf flash through rsdlite 4.9.5.2 and now 5.6. First 3 things reset as soon as i restart. For RSDLite, it gives checksum error for each and every ROM i tried. I tried all SEA releases, JORDN_U3_97.21.51, Defy Plus Rom 2.3.6, 2.21 first eclair rom, everything gives the same error. From the RSDLite logs, i could see that there is something wrong as.. say the last successful CG was 33, and the error came for 34, the log says its expecting the checksum on the sbf to be equal to that of CG 33. Its taking the last successful checksum validation and expecting that for all the CGs henceforth. its not showing what the device actually has.
I atlast could somehow, but trial and error, removed all the CGs which were throwing error, and recompiled the sbf to make it pass the RSDLite flash. The CGs present in the ROM (JRDNEM_U3_3.4.3-36-1.7) were 32, 34, 42, 53, 61, 64, 65. And as soon as it booted, it restored back to the checkpoint. Even after i formatted by card and put it in, the app shortcuts remained on the home screen, but as the apps on the card were gone, they are just junk and doesnt open anything.
Thanks in advance. Please let me know what you need from me to help me resolve this issue.
Any help... Anyone?
Can someone please suggest something?
This is what i got from some people. I am not sure how far this is possible, but somehow the theme i installed just before this all happened, from MIUI market.. somehow managed to change something inside phone's kernel, past the locked bootloader? I am totally a noob in this and just a wild imagination?
Or may be some sort of cache wipe is happening everytime the phone boots up, So even when i install the ROM, when it boots up, it gets back the old ROM.. like what would probably happen if i do a factory reset soon after i instal a rom before the restart..?
I would really appreciate it if anyone could help me out with this...
Checksum errors were for me also.
I tried my office computer for flashing and instantly flash was done. The checksum error occurred 7 times on my good computer before that.
Reflashing froyo must take care of all errors happening
Thanks Kapil fr the response. Are you from india? Which sbf did u flash? And waht all did u install in the office pc? I have a pc of my friend where i can try to reflash if you tell me the exact steps that u took in the fresh pc.
Also, can anybody tell me how to use adb commands in CWM mode? Its recognizing my phone in normal mode but as soon as it boots in Moto recovery of CWM, its not recognizing anymore. Want to use adb format commands from recovery.
Hi I was able to use adb in CWM, but format commands were not working. How can i format the system partition? please help me with this.
Is there anyone here who know how to restore a nandroid backup manually using adb commands for MB525???!!!!!
Sounds weird and impossible. Try this. Wipe everything though cwm and flash new rom. Try ms2ginger.
Thanks darshanonline for the suggestion. I tried to wipe everything.. factory reset+cache+dalvik cache wipe. And then tried to install cyanogenmod 7.1 as well as 3 different wiui builds. Everytime it shows that the install was successful, ut as soon as i restart, it would go back to the old ROM.
Is there any checkpoint system in android, seeing the init.rc, i can see comments on something about saving a checkpoint. Is there any particular condition under which this checkpoint may be getting used on very restart?
Also.. is there any way for RSDLite to skip the chksum validations and get the install anyways?.. Some sort of a hack into it?
Ok.. Found something else thats happening. I dont need to shutdown for the system to revert back. Say i install a few things new after a reboot.. After some time.. 1 day at max, i am not able to open them, and neither am i able to open manage applications or market. Everything force closes. I have Ti Backup installed, and i opened it, and i didnt find the new apps to back up. I connected the device and checked through adb, and they were not present in the app folder. They just vanished... So basically after a certain point of tiime, the new stuff just gets deleted on its own.
Guys i know i may sound dumb and stupid with my questions, but i really couldnt find any solution on the net for this. Please tell me waht i should do, and i'll do it. But tell me something. Dont ignore please!
and you did wipe data from within stock recovery (vol down+power etc.), i presume..
Sent from my MB526 using Tapatalk
Yes i did that too.
wiped data and cache. Restarted to cwm and installed update.zip (renamed cm 7.1 stable) and by selecting zip from sd card. Same results. Installs successfully but reverts back as soon as i restart.
Same problem here:
http://forum.xda-developers.com/showthread.php?p=22617834
Soumik84 said:
Yes i did that too.
wiped data and cache. Restarted to cwm and installed update.zip (renamed cm 7.1 stable) and by selecting zip from sd card. Same results. Installs successfully but reverts back as soon as i restart.
Click to expand...
Click to collapse
DL WIUI 1.12.16 ICS > copy to SD card > Boot in CWM > select zip to install > Install WIUI 1.12.16
Hopefully your problem should be solved.
I found 1.12.16 ICS with lesser FC than the 2.21
labsin said:
Same problem here:
http://forum.xda-developers.com/showthread.php?p=22617834
Click to expand...
Click to collapse
Thanks for the link. Now i know that i am not the only one having this issue. But even there its not resolved yet.
@ headers.chennai - Thanks. I will try that ROM, along with Pikachu ROM with Aroma installer, might be a different installer can try fix it?!
BTW.. does anyone have the TI OMAP board utility? Any chance that it can be available outsite here?
I tried the arora installer and it supposedly formatted the system partition and remade it.. but as soon as it finishes and i restart.. I get back the same ROM.
Is it some way that the files are not getting deleted, like some hardware lock or fault?
Soumik84 said:
I tried the arora installer and it supposedly formatted the system partition and remade it...
Click to expand...
Click to collapse
Hi, bro! What is "arora"? I should try it asap, and all other chance.
My trouble here, same as your.
Hey man.. looks like we are having same problem...
Sorry abt the typo... its Aroma Installer. Its with the Pikachu ROM in this link :
http://forum.xda-developers.com/showthread.php?t=1498843
Its a new installer that launches from cwm when u try and install this ROM. u got some options to select and on selecting the complete install option,, the log shows that it formats the system partition and then creates it. I saved the log file, but for some reason the file shows up blank now. Might be problem with the launcher.. or my phone.. dont know.
Soumik84 said:
Its a new installer that launches from cwm...
Click to expand...
Click to collapse
Not for me, my checkpoint without cwm

[Q] problems with i9001

hey i got a problem with my i9001 sgs+ , im running cm9, everything works, camera, wifi........but i just cant install playstore -.- ive tryed everything!! when i flash gapps its not there as if i didnt do anything...please some help?
fk.xd said:
hey i got a problem with my i9001 sgs+ , im running cm9, everything works, camera, wifi........but i just cant install playstore -.- ive tryed everything!! when i flash gapps its not there as if i didnt do anything...please some help?
Click to expand...
Click to collapse
In settings\apps\downloaded\google play store and press clear data and uninstall updates and do the wipes in recovery
Than install this http://www.4shared.com/android/ejrDDDRa/Phonesky.html
If its still the same, you may need to Flash the ROM and Gapps again
In recovery i can only do the cache partition wipe, there is no dalvik or something like that..and in the settings apps there is just force stop and clear data..
fk.xd said:
In recovery i can only do the cache partition wipe, there is no dalvik or something like that..and in the settings apps there is just force stop and clear data..
Click to expand...
Click to collapse
In CWM, http://forum.xda-developers.com/wiki/ClockworkMod_Recovery , you will have all of these options, use advanced to clear dalvik cache and install the google play store apk, attached earlier and test, if it works, if not you may have to flash ROM and gapps again
-.- i did it and its now ona f*****g recovery loop..aaargh....it says "E:cant mount /cache/recovery/command" ill try to do this: http://forum.xda-developers.com/showthread.php?t=817186
i found this http://forum.xda-developers.com/showpost.php?p=24831012&postcount=1330 a lot of people has the same problem..but when it says downloading on the screen, when the phone is plugged in, its taking a lot, when ima entering the download mod
fk.xd said:
i found this http://forum.xda-developers.com/showpost.php?p=24831012&postcount=1330 a lot of people has the same problem..but when it says downloading on the screen, when the phone is plugged in, its taking a lot, when ima entering the download mod
Click to expand...
Click to collapse
your phone is an i9001, so use your WIKI http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001 , most likely you may end up having to get back to a stock ROM top solve this, but first remove battery, remove SIM card and Ext card, press power button for a min, than insert battery only, try reboot. If still the same go into download mode use odin 4.43 with AriesVe.ops and flash a CWM 6.0, try reboot
When I wanted to upload moonrom for the first time I was also freaked out when my phone got stuck in loop. I did what xsenman said.
Installed Odin on my laptop flashed base 2.3.6 GB than flashed CM 5.0.5 and lunched moonrom installer again.
Actually I believe that you got to have some special skills or be totally uncommon with computers and software to hard brick your phone.
Browse this forum carefully read a lot and you will succeed for sure.
Typed with my I9001
I think the easiest way is to go into recovery, go to mount and wipe.every partition, after that mount usb storage connect your.phone to the pc copy cm9 and gapps then install it.
I had the same problem and this worked for me.
If you everything right it's 15 min max
Sent from my GT-I9001 using xda app-developers app

[Q] Huawei u8800 restart trouble

I am having troubles for weeks and still cant do anything
. I can only go into android recovery, can wipe data and then after 2-3 restart, huawei x5 boots. Then if i restart, there are a lot of windows appear showing stop activities. Even i cant click restart button.
So, i put first 2.3.5 then ginger bread custom app to dload in ext and int sd. Then after wiping in android recovery , i made power off and with + - and power, i made update. This time updates were successfull. Before it wa s failing.
It could make updates. But after updates, again could not start. After loading huawei logo, it restarts and cant go to desktop.
I cant change recovery because i cant install superuser because it should be restarted but if it is restarted, cant start.
I can only use sd card, after wiping data, until one restart . How can i change without rooting recovery? And i change recovery, does this help ? I dont know what the problem is.
Please help.
Cursed Chico said:
I am having troubles for weeks and still cant do anything
. I can only go into android recovery, can wipe data and then after 2-3 restart, huawei x5 boots. Then if i restart, there are a lot of windows appear showing stop activities. Even i cant click restart button.
So, i put first 2.3.5 then ginger bread custom app to dload in ext and int sd. Then after wiping in android recovery , i made power off and with + - and power, i made update. This time updates were successfull. Before it wa s failing.
It could make updates. But after updates, again could not start. After loading huawei logo, it restarts and cant go to desktop.
I cant change recovery because i cant install superuser because it should be restarted but if it is restarted, cant start.
I can only use sd card, after wiping data, until one restart . How can i change without rooting recovery? And i change recovery, does this help ? I dont know what the problem is.
Please help.
Click to expand...
Click to collapse
I also don't know what your problem is. Can you upload your logcat to pastebin.com and send the link for the log?
rqmok said:
I also don't know what your problem is. Can you upload your logcat to pastebin.com and send the link for the log?
Click to expand...
Click to collapse
Log of android recovery?
Now i wiped and i am in 2.3.5. 2.6.35.7 kernel and battery seems nice discharging. But i am afraid to restart. IF i restart, it will gain go into desktop but al ot of activites start to show ballons, stop activity.
Cursed Chico said:
Log of android recovery?
Click to expand...
Click to collapse
log of android
rqmok said:
log of android
Click to expand...
Click to collapse
Sorry i seached but i could not find how to see logcat, except dialing *#*#.. to siwtch on.
Should i use a linux computer?
In sd card in dload file, there is a log. Written:
notesdld_file_ptr != -1) !
SD download finished!
Hey. By chance, i dont know how exactly. In android recovery, i made a lot of time wipe data, then took of battery and volume -+ and battery to install step 2 dload. It installed but when i opened, it could not opened. SO i did 2-3 times and i tried to go into pink screen but it tried to install update, so i took battery and i opened after that. Now , the original stock rom is installed. froyo 2.2.1. I dont know how this were installed. But i restarted 3 times and no problem.
So, what i will do is those?
1- Install super user
2- Do root.
3- INstall cwm
That?
(And flash is not working and in file manager, i can only see ext and int sd, not phone memory? BUt in es exploerer, i could see /device.)
And please tell me a good rom to install. MAybe aurora 20 again but how to install, first to 2.3.5 then to aurora then v20?
Aurora ICS
Im having quite frequently restarts when turning on wifi.
Lukish
Cursed Chico said:
Hey. By chance, i dont know how exactly. In android recovery, i made a lot of time wipe data, then took of battery and volume -+ and battery to install step 2 dload. It installed but when i opened, it could not opened. SO i did 2-3 times and i tried to go into pink screen but it tried to install update, so i took battery and i opened after that. Now , the original stock rom is installed. froyo 2.2.1. I dont know how this were installed. But i restarted 3 times and no problem.
So, what i will do is those?
1- Install super user
2- Do root.
3- INstall cwm
That?
(And flash is not working and in file manager, i can only see ext and int sd, not phone memory? BUt in es exploerer, i could see /device.)
And please tell me a good rom to install. MAybe aurora 20 again but how to install, first to 2.3.5 then to aurora then v20?
Click to expand...
Click to collapse
OK. First, you need to upgrade to official 2.3.5. Then, use this guide: http://forum.xda-developers.com/showthread.php?t=1420728
Please follow the guide properly. It is very useful.
lukish_bochi said:
Im having quite frequently restarts when turning on wifi.
Lukish
Click to expand...
Click to collapse
Yeah. That's one of the problems with Aurora.
I installed 5.0.2.8 cwm, is it latest?
And first i did superuser and root. BEcause i am afraid of again having restart prbolems if i go to 2.3.5.
I have this file
U8800_Android 2.3 V100R001C00B526G001(Normal)
It has step 1 dload.
and that
U8800 V100R001C00B136SP05CUSTC75D001(Portugal TMN)
this has step 2 dload.
In your guide i couldnot see.ARe those true for me?
****. I installed step 1 update, it tried to restart but again it went into loop . And it aumatically went into android recovery. Where cwm is, i dont know.
Now i will go back to 2.2.1, i will try. I am very boreed of this.
Hi!
Did you try B517 from this thread: http://forum.xda-developers.com/showthread.php?t=2166353
Look under official gingerbread and you can try B517 or B518.
I tried all 2.3.5 gingerbreads but after updating, it keeps restarting and automatically go into recovery and wipe data and then opens 2.2.1 . I dont know what to do.
i tried to install those you sent. All gingerbreads after updating, started to restart and went into recovery. I dont know what to do. Froyo is ok, no restart. Maybe imei or something was damageD?
No. It could be that your phone is u8800-51, but I am not sure. I don't know how to check this; it might be under the battery, or you might know how to find out on the internet.
now after wpiping data, it installs 2.3.5 . No more 2.2.1. I dont understand sometimes it resets to 2.2.1, sometimes to 2.3.5
I looked under batter, u8800.
And also i was using 2.3.5before. After i came back from aurora, this s h it started. I install cwm but still deletes it.
Cursed Chico said:
now after wpiping data, it installs 2.3.5 . No more 2.2.1. I dont understand sometimes it resets to 2.2.1, sometimes to 2.3.5
I looked under batter, u8800.
And also i was using 2.3.5before. After i came back from aurora, this s h it started. I install cwm but still deletes it.
Click to expand...
Click to collapse
So, are you on 2.3.5 right now? Do you have cwm?
rqmok said:
So, are you on 2.3.5 right now? Do you have cwm?
Click to expand...
Click to collapse
I am on it but after 1 restart, same thing happens, all activities ends. Nothing in it. I cant install cwm because it needs restarts.
When i try to apply update from sd card in android recovery
logs are that
finding update package
opening pdate package
veryifng update package
e:failed to veryfy whole file signature
e:signature verificaton failed
installation aborted

Categories

Resources