Related
I have used several WM phones before this, the two last were Atom and Atom Life. But this phone does not want to play ball with the USB extension cables I've been using all the time. First: No, the cables are all right: I can still sync my Atom Life without any problems. And I have used the original USB cable for the HD that comes with the box at the end (even though I've heard that syncing works just as well with a regular mini USB).
But neither a 3 m long extension cable (which is well below the 5 m USB limit) nor plugging it into a USB hub helps. Sometimes I can get a bit further with unticking the "advanced network" part of the USB to PC connection. But not allways. Has anybody here found a solution to that or even had the same problem?
Mine works fine on a Belkin 5 metre extension cable.
I can only sync with the cable that came with the phone. Other mini USB cables (ones that fit but are a different shape) only charge.
barryfell said:
I can only sync with the cable that came with the phone. Other mini USB cables (ones that fit but are a different shape) only charge.
Click to expand...
Click to collapse
r u serious?! damn..!!! i've never tried it with the HD. my touch pro used to work perfectly with non-factory mini usb cable...
This happened to my HD.
Phone call to orange later and they insisted on replacing it under insurance.
All they wanted to check was whether the HD and PC would sync. I told them no and the response from the script that they have to work through, was that the phone is marked as "broke" and needs replacing.
In my case I suspect that the USB port may have been damaged when the car charger cable was pulled out accidently in the car with some force. Seems that they are a little delicate, especially with none HTC cables (i.e. without the odd shaped plug with only one corner truncated). I have read that non HTC ones fit a little less snug and can put stress on the board inside the phone when plugging / unplugging.
nickallison said:
Seems that they are a little delicate, especially with none HTC cables (i.e. without the odd shaped plug with only one corner truncated). I have read that non HTC ones fit a little less snug and can put stress on the board inside the phone when plugging / unplugging.
Click to expand...
Click to collapse
You hit that on the money. I see it as a design flaw as well as a scheme to get people to buy HTC-specific accessories. But you are right, generic cables with the different connector do fit loosely and can cause issues after time if you are not gentle with it. Also, the USB connector itself on the device and internally on the solder points is poorly designed. This doesn't help.
I can sync with any cable, but it seems to be to problems:
1. If the extension is too long, it will fail.
2. If it's run by more than one USB hub it will fail. The first hub is a Toshiba docking station with a one meter cable from the laptop. The second is a D-Link powered USB hub. No matter what cable I use then it won't sync. With the cable connected to the Toshiba docking I can sync both with a regular mini USB and the original cable. Strange thing is that it only works on one of the two the front USB connections and not on one of the four at the rear! Then again Windows isn't supposed to be logical, I guess...
Normal miniusb cable works perfectly for either charging and syncing.
I even had a 7m usb cable (5m and a 2m usb extending cable), worked perfectly for either charging and syncing (I need my phone to be next to my bed, and my PC is like a few meters away from my bed).
Seriously don't know how your HD refuses to work with a cable other than the stock HD USB cable.
Hi,
are you using a custom ROM?
i used all sorts of cables, whatever happens to be lying around, infact i never use the stock one, as this is plugged it at a very inaccesable wall socket for mains charging!
generally my cables go through a hub, and then a 1m extension.
the reason i ask about the ROM is that i have flashed loads of different ROMS, and all worked fine, except one ROM (think it was topix 2.6), where it would only connect for a brief moment before auto-disconnecting. i suspect it was a 'bad flash' as they say, and so if you are using a custom ROM would suggest a re-flash. if not, you could consider a hard reset, or trying a different ROM (perhaps if it the stock ROM it has a 'bad flash' at the factory)
Tom
This thread has been hijacked (I never asked about regular mini USB versus the proprietary HTC version), but if you're asking me, I'm using the latest official HTC version (Norwegian).
mine is not picky at all...
Thank god, I checked with a mini usb that came with my external HDD and it worked perfectly...
I tried 3 other cables and none of them work apart from to charge.
I'll see if it's an issue with using my hub.
barryfell said:
I tried 3 other cables and none of them work apart from to charge.
I'll see if it's an issue with using my hub.
Click to expand...
Click to collapse
Have you tried updating usb drivers?
Fallen Spartan said:
Have you tried updating usb drivers?
Click to expand...
Click to collapse
No i'll try that when I get home.
Thanks
I have this issue with a specific cable on vista64, the phone only charges, but if I connect it to a Ubuntu box, I can sync, share network etc.
I think M$ is the issue in that case.
So this may be a silly question, but I've just received the T-Mobile MDA (HTC Wizard) second-hand and without a charger.
The Mini USB port on the bottom allows ActiveSync and charging from my notebook's USB port, but when I try to charge using an AC-to-USB adapter it doesn't work... I've tried two different Motorola phone chargers and a generic one that came with my Jawbone that has a USB female connector on the adapter and you supply your own USB cable. I've used the same cable I was using when attaching to the PC, but no luck.
Interestingly enough, I did get it to charge with the same USB cable once at an airport by plugging it into the Southwest Airlines chairs with the USB power plugs...
So does anyone know? Does this phone require a special sort of charger?
you need a charger that is rated 1.0Amps.
usb is normally 500mAmps, not enough to charge your phone.
I can't seem to find a usb to "whatever it is" wire selling..
is it a standard micro USB port?
leobox1 said:
I can't seem to find a usb to "whatever it is" wire selling..
is it a standard micro USB port?
Click to expand...
Click to collapse
yes... u r rite... itz a MICRO USB...
But it can't supply power to a USB device, so it can't be used like a PC USB port. It's only good for recharging and syncing.
so if i want to buy an additional wire, i look for a USB to MICRO USB wire right? no need to buy from HTC right?
cause i saw one usb that is smaller but it doesn't fit.. is there a MINI USB port too?
am confused
Stephen Selby said:
But it can't supply power to a USB device, so it can't be used like a PC USB port. It's only good for recharging and syncing.
Click to expand...
Click to collapse
Erm yes it can,
Actually better take the device with you. Sellers here told me there is like 7 different very similar connectors. However this one should be the standard micro USB, which is supposed to be universal charger/sync cable in the future (at least in EU).
And yes, of course, there is mini USB. And there even are more versions of mini USB, for example HTC used their own.
You had better use HTC cables. HD2 is microusb, but not all microusb cables are good for HD2. Like iPhone, it takes a large charging current, and many no brand cables cannot do it. I've got a third party cable that syncs only, but if charged from the PC, the HD2 will say that the charging current is too small. Battery actually drops when I connect HD2 to PC using this cable (because my options set it that backlight is always on when HD2 is connected). Other combinations are OK:
original cable + AC plug: charging OK
original cable + PC: charging OK
third party cable + AC plug: charging OK
third party cable + PC: "insufficient charging current"
Be careful with cables- you'd be better to buy the genuine HTC version.
Many USB/MicroUSB cables are for charging only, and don't have the data pins connected. Thats OK if you just want to charge it while you are away from your main PC or power supply.
You can also buy a miniUSB/MicroUSB adapter for charging using and older miniSUB charger, but again these don't have the data pins connected.
I bought a number of 3rd party USB to microUSB cables a month ago for sync and charging (office, PC, bedside charging), so far so good... no issues (maybe I'm lucky). The OmniaII uses the same connector, so I'm using the HTC car charger to charge both.
I bought Nokia's cable (for E71,N97,etc.) and it work just fine with charging from laptop. much cheaper than HTC in here.
if you are going for the cheapo option...
http://shop.ebay.co.uk/?_from=R40&_trksid=m38&_nkw=MICRO+USB+SYNC%26+CHARGE+CABLE+for+HTC+HD2+HD+2+Leo+T8585
i got a couple from ebay - arrived the next day. - charge/sync fine.
charger from iPhone
The iPhone charger coud be used for charging HD2. Just plug the microUSB cord instead of iPhones and ... voila. The same outputs
N86-8megapixel cable doesnt work..
So I managed to leave my HTC cable at work (2 days after getting the Telstra HD2 in OZ) and now I am on 4-5 days leave from work and really want to tinker with my phone. I think I may end up having to go back to work to collect the HTC cable - as below... challenge to get non-HTC cable to work.
I found that my wife's N86-8megapixel nokia has a similar micro-usb cable.
When connected to the PC the phone starts charging and the PC does the "doo-doop" sound a "appears" to connect to the phone, but active sync cannot detect the phone \ sync.
I see others have had success with nokia cables - I am wondering if there is something wierd going on.
Long story short, I flashed to CM6 a while back when RC1 was released and was happily using it for a bit. I encountered a situation that randomly appeared somehow (probably involved using a non-mt3g usb car charger but I don't recall the specifics) where my USB functions did not work anymore.
The phone will not mount the sdcard via usb, adb and fastboot does not detect the phone via usb, and the phone does not charge when "on" but I found out it charges normally when "off" using any charger (official mt3g charger or the usb car charger) and will be fully charged within 2hrs on the 1A wall charger.
I haven't found a solution yet and I've been debating whether it is a hardware/software issue. Any input would be helpful
Oh the headphone/mic attachment works fine as well but that is probably not related to the standard mini usb port/pins since the htc extusb includes pins for audio in/out
Does anyone have a confirmed working car charger for this phone?
My motorola car charger that I used for my GNex and GS3 isn't fully compatible with the G2. I get a message saying "slow charging" when I plug it in.
What do you guys use to achieve full charging speeds?
I realize there's a Q&A forum, but since this is directly related to accessories, I wasn't sure if it was better suited for this forum.
Nobody has a working car charger?
Both of these work for me.
http://www.amazon.com/gp/product/B0042B9U8Q/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
http://www.amazon.com/gp/product/B006SU0SX0/ref=oh_details_o03_s00_i01?ie=UTF8&psc=1
the powerjolt is much more low profile though
That's just a generic list. The G2 requires a hi power charger
jeff_warner said:
Hi check out this collection of car charger for LG G2...they all are compatible with LG G2 and wont create any issue of slow charging and all...you can avail any of them for free shipping too...
Thanks !!!!
Click to expand...
Click to collapse
Sent from Bad Azz VZW LG G2 Cyan Tapatalk
beddachedda said:
Both of these work for me.
http://www.amazon.com/gp/product/B0042B9U8Q/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
http://www.amazon.com/gp/product/B006SU0SX0/ref=oh_details_o03_s00_i01?ie=UTF8&psc=1
the powerjolt is much more low profile though
Click to expand...
Click to collapse
The powergen dual port works great. It has two 2.1amp USB ports, one that works with Android, and the other with Apple products (when using a data cable --> detecting USB vs AC charge mode). I have custom USB cables where I shorted the data pins so I always pull at AC charge rates regardless of the port type. In any event, this charger should provide you with the same capability as the OEM wall charger.
I have a 2amp car charger and it works fine, no message about slow charging.
the issue im runnin into is find a usb cable that enables fast charging
i have a dual usb car charger that put out 2amps per usb but cant.find an aftermarket usb to micro that can support more amps (fast chargin)
the oem lg g2 cable works...as well as the nexus 7 cable
i got this cable but doesnt charge more than 1amp
http://www.amazon.com/gp/aw/d/B004G...c=1&redirect=true&ref_=oh_details_o01_s00_i02
---------- Post added at 10:01 AM ---------- Previous post was at 09:54 AM ----------
kyler13 said:
The powergen dual port works great. It has two 2.1amp USB ports, one that works with Android, and the other with Apple products (when using a data cable --> detecting USB vs AC charge mode). I have custom USB cables where I shorted the data pins so I always pull at AC charge rates regardless of the port type. In any event, this charger should provide you with the same capability as the OEM wall charger.
Click to expand...
Click to collapse
how do u short the data pins?
nitric13 said:
the issue im runnin into is find a usb cable that enables fast charging
i have a dual usb car charger that put out 2amps per usb but cant.find an aftermarket usb to micro that can support more amps (fast chargin)
the oem lg g2 cable works...as well as the nexus 7 cable
i got this cable but doesnt charge more than 1amp
http://www.amazon.com/gp/aw/d/B004G...c=1&redirect=true&ref_=oh_details_o01_s00_i02
---------- Post added at 10:01 AM ---------- Previous post was at 09:54 AM ----------
how do u short the data pins?
Click to expand...
Click to collapse
To short the data pins, I actually cut a USB cable, stripped back the insulator, re-soldered the +5V and ground wires, soldered together the data pins on the microUSB side of the cable, and stagger cut the data wires on the other side. Prior to the re-soldering, I slipped some shrink tubing on one end of the cable to re-insulate everything. Not for the faint of heart.
Background for those that don't know... Typically, Android phones look for little to no resistance on the data pins to detect a high current charger. Any other load triggers USB mode since most PC's are only designed to supply 500mA via USB. I assume this is a safety issue to prevent overdrawing a PC's port. Apple operates differently. They look for some nominal resistance as USB and switch to fast charge under open or some higher resistance. Most chargers >500mA are designed for the iPhone market unless they explicitly state other compatibility. Therefore, the data pins are floating. Any charger can be used at its max rating if you trick the Android phone with the homemade cable described above. Of course, then it becomes a power-only cable, useless for data. Clearly, OEM chargers for Android phones short the data pins internally so your OEM cable can be used with a wall charger (fast) or with your PC for data connections and nominal (slow) charging.
So the powergen mentioned above has two 2.1A ports, one labeled NA (non-apple) and A (apple) so you don't need to worry about mix-n-match devices and cables. Any USB cable will fast charge on the appropriate port. With my homemade cable above, my Galaxy Nexus will fast charge on either port.
Fast forward to the G2... Just got it yesterday and while in the car, I noticed my homemade cable only permitted SLOW charge on either port. Huh. Kinda a head scratcher. I ran in the house and got the OEM LG cable and both ports worked with FAST charge. So I tried one more thing, I grabbed a regular USB cable and observed the following: the phone went into FAST charge on the apple port and SLOW charge on the non-apple port. I can only assume that LG is detecting fast charge in a different way. The fact that a standard USB cable doesn't work with the data pins shorted at the charger but the OEM cable does makes me think there is something about LG's cable that allows it to pull max power from the charger. FYI, I plugged the OEM LG cable into a 850mA Motorola AC charger and it registered as SLOW charge.
kyler13 said:
To short the data pins, I actually cut a USB cable, stripped back the insulator, re-soldered the +5V and ground wires, soldered together the data pins on the microUSB side of the cable, and stagger cut the data wires on the other side. Prior to the re-soldering, I slipped some shrink tubing on one end of the cable to re-insulate everything. Not for the faint of heart.
Background for those that don't know... Typically, Android phones look for little to no resistance on the data pins to detect a high current charger. Any other load triggers USB mode since most PC's are only designed to supply 500mA via USB. I assume this is a safety issue to prevent overdrawing a PC's port. Apple operates differently. They look for some nominal resistance as USB and switch to fast charge under open or some higher resistance. Most chargers >500mA are designed for the iPhone market unless they explicitly state other compatibility. Therefore, the data pins are floating. Any charger can be used at its max rating if you trick the Android phone with the homemade cable described above. Of course, then it becomes a power-only cable, useless for data. Clearly, OEM chargers for Android phones short the data pins internally so your OEM cable can be used with a wall charger (fast) or with your PC for data connections and nominal (slow) charging.
So the powergen mentioned above has two 2.1A ports, one labeled NA (non-apple) and A (apple) so you don't need to worry about mix-n-match devices and cables. Any USB cable will fast charge on the appropriate port. With my homemade cable above, my Galaxy Nexus will fast charge on either port.
Fast forward to the G2... Just got it yesterday and while in the car, I noticed my homemade cable only permitted SLOW charge on either port. Huh. Kinda a head scratcher. I ran in the house and got the OEM LG cable and both ports worked with FAST charge. So I tried one more thing, I grabbed a regular USB cable and observed the following: the phone went into FAST charge on the apple port and SLOW charge on the non-apple port. I can only assume that LG is detecting fast charge in a different way. The fact that a standard USB cable doesn't work with the data pins shorted at the charger but the OEM cable does makes me think there is something about LG's cable that allows it to pull max power from the charger. FYI, I plugged the OEM LG cable into a 850mA Motorola AC charger and it registered as SLOW charge.
Click to expand...
Click to collapse
I have pretty much the same thing, had a cable that would only do slow charge, so I stripped the wires back, and on the micro usb side I cut the green and white(data) and twisted them together. Now its fast charge no matter what charger I plug this cable into.... not sure why urs isn't....
My AT&T branded charger doesn't give me the slow charge notification.
Sent from my LG-D800 using Tapatalk 4
droidiac13 said:
My AT&T branded charger doesn't give me the slow charge notification.
Sent from my LG-D800 using Tapatalk 4
Click to expand...
Click to collapse
Yes, but its not a 2 amp charger. We want a bigger fast charge vehicle charger...
I tried the USB plug in my car (Scion 2012) and two different Belkin cigarette/USB chargers today. The USB and one of the Belkins gave slow charging. The other Belkin did not -- worked fine. They were supposed to be identical, but I had suspected one was a fake. Guess I was right.
I just use the usb cable that came with their phone and plug it into my auto usb or the car's 110 outlet.
Sent from my VS980 4G using Tapatalk 4
Tylt. Flat ribbon charger works.
Sent from Bad Azz VZW LG G2 Cyan Tapatalk