Related
i want to kno how do i flash to nand again? i followed dzo's steps to flash nand by putting the tar file in my sd card. i got it to boot up to the stock donut that was with it. but now that i try to flash jamezelle's sensehero it jus gets stuck at the htc boot screen. any ideas?
inphin1ty said:
i want to kno how do i flash to nand again? i followed dzo's steps to flash nand by putting the tar file in my sd card. i got it to boot up to the stock donut that was with it. but now that i try to flash jamezelle's sensehero it jus gets stuck at the htc boot screen. any ideas?
Click to expand...
Click to collapse
Read this first and tell me if you still need help...
http://forum.xda-developers.com/showthread.php?t=603508
yea.. thats the one i tried to follow but when i try to boot it up with the sencehero rom it just stays stuck at a loop of the htc/hero screen
check and see what the resolution need to be to run that version. i ran into the same problem when i tried doing it from the sd. im betting its the same issue
I have a feeling it was your kernel...make sure you have the right size too. Hero is 320 x 480
im thinking it is the kernel too.. but now i want to know how do i flash it with romupdate again if i already used romupdate? when i plug in my phone to usb and try to run romupdate it says it doesn't find my phone plugged in =/
inphin1ty said:
im thinking it is the kernel too.. but now i want to know how do i flash it with romupdate again if i already used romupdate? when i plug in my phone to usb and try to run romupdate it says it doesn't find my phone plugged in =/
Click to expand...
Click to collapse
did you put your phone in bootloader mode?
put it in bootloader mode. Hold camera, power, and hit the power reset in the pin hole on the bottom of the phone. Then try.
THank you thank you. it worked like a charm. finally got sensehero haha
Hey guys been reading around and trying to get Android on HD2. I am trying to install HardSPL3 on the HD2 and it is not working correctly keep getting error message. I had Android booted on it before but when rebooted it went back to windows mobile. Anyone can please help with a user friendly guide I'm not sure with Windows mobile and could really use help please. Thank you guys.
I too had this problem and it was cause I didn't run clrcad after you run that then boot haret
Markus214 said:
Hey guys been reading around and trying to get Android on HD2. I am trying to install HardSPL3 on the HD2 and it is not working correctly keep getting error message. I had Android booted on it before but when rebooted it went back to windows mobile. Anyone can please help with a user friendly guide I'm not sure with Windows mobile and could really use help please. Thank you guys.
Click to expand...
Click to collapse
You do realise that when the phone reboots it will ALWAYS reboot into windows, right? You have to load clrcad and haret again every time (or use a bootloader, like Exceller boot loader to do this for you)
Reno_79 said:
You do realise that when the phone reboots it will ALWAYS reboot into windows, right? You have to load clrcad and haret again every time (or use a bootloader, like Exceller boot loader to do this for you)
Click to expand...
Click to collapse
Than i guess my frustration is why is it only a temporary thing? I thought with having Android on it you can have it on there for good.
No its not there for good but you can use a bootloader which prompts you to load Android or Windows when WM starts up.
I am happy because I have both so may get the option of seeing WM7 on here too
Use JMZ dual boot
This give the option of Android or Windows at boot up
http://forum.xda-developers.com/showthread.php?t=723200
Hello guys.
I had overheating problems with NAND Cyanogenmod7, android 2.3.7
I wanted back to WINMO 6.5, so I downloaded file from HTC local.
I put the phone in tricolor, put usb and started sync, agreed with everything after running file from desktop on PC. It started good, but stopped at 8% with red color.
Had to pull the battery out and interupt, now I get message: SOFTWARE UPDATE FAILED, PLEASE TRY AGAIN (IN RED COLOR), and it directs me to tricolor screen. :S
Damn, is it completely bricked?
Should I try install by taking SDcard out, sync with USB-SD-card transfer? Then maybe rename the RUUSIGNED.nbh file to leoimg.nbh, then move it to root on SD card and turn the phone on this tricolor screen? :S
I don't know what to do at all. :S Don't want to mess it up even more, so please anyone who knows a little about this help a poor guy?
PLEASE!! Thanks for any help!
Could anyone just come with a solution? Just come with something, please. The phone has been OFF after this happened to spare battery percentage, so I want to wait till someone can tell me what to do eventually.
Try to read the appropriated topic http://forum.xda-developers.com/showthread.php?t=668347 and to ask there. No need to open new thread in the wrong section - no-one will read or write the answer here in mobile development
Hello all, i need some help. I bought used HTC HD2, phone was old for about 2 weeks in perfect condition but he had 2.2 froyo installed on micro sd. Phone is not working fine and i dont like android to much so i want to have wm 6.5 as stock has too. I ha t mobile for operator but im almost positive that phone is bought in EU Pls help me to get off anroid and get the phone back to stock so i can have 6.5 wm os. I tryed everything im just not good enough with terms such as radio,SPL ect. so im noob at this. Pls help me somehow.Sorry for my bad english. Thank you
Hi there, I don't know fully how to do this myself (as I personally love android OS ) but I've found a couple of links that should help you out.
http://androidforums.com/htc-leo-hd...oid-2-2-reinstall-windows-mobile-6-5-3-a.html
http://www.jayceooi.com/2011/08/15/how-to-restore-stock-rom-on-htc-hd2-video/
The ROM is basically the 'operating system' the phone uses, a radio controls how its hardware connects to things and as for SPL I don't know either
If you didn't install android on it yourself you might need to install a couple of things on your PC - the links will tell you what you need. Good luck!
simec2404 said:
Hello all, i need some help. I bought used HTC HD2, phone was old for about 2 weeks in perfect condition but he had 2.2 froyo installed on micro sd. Phone is not working fine and i dont like android to much so i want to have wm 6.5 as stock has too. I ha t mobile for operator but im almost positive that phone is bought in EU Pls help me to get off anroid and get the phone back to stock so i can have 6.5 wm os. I tryed everything im just not good enough with terms such as radio,SPL ect. so im noob at this. Pls help me somehow.Sorry for my bad english. Thank you
Click to expand...
Click to collapse
If he had, as you said, installed Android on the SD card, then just reboot.
Nigeldg said:
If he had, as you said, installed Android on the SD card, then just reboot.
Click to expand...
Click to collapse
how do i just reboot? i tryed that stuff with leoimg ect. but nothings happened, after i shut the pfohe off, i press vol. down and power on button, then that colorful screen appears and says "serial" on the bottom and it doesnt go to the loading screen :/
simec2404 said:
how do i just reboot? i tryed that stuff with leoimg ect. but nothings happened, after i shut the pfohe off, i press vol. down and power on button, then that colorful screen appears and says "serial" on the bottom and it doesnt go to the loading screen :/
Click to expand...
Click to collapse
What kind of SD are U using? Leoimg-thingy is only working on SD's up to 4gb...larger SD's will not be recognized in tricolor loader.
simec2404 said:
how do i just reboot? i tryed that stuff with leoimg ect. but nothings happened, after i shut the pfohe off, i press vol. down and power on button, then that colorful screen appears and says "serial" on the bottom and it doesnt go to the loading screen :/
Click to expand...
Click to collapse
Nah because you said your friend installed Froyo on the SD, I assumed it was a dual boot with WinMo. What's the OS on the NAND? WinMo, WP7 or Android? And as icke pointed out, you'll need a small SD. If you're lucky, your friend may have the original 2GB SD which came with the phone, so you could try again using that one instead.
If the smaller SD doesn't work, are you sure that you're doing everything correctly? You do have leoimg.nbh on the root of your SD card, right?
Nigeldg said:
Nah because you said your friend installed Froyo on the SD, I assumed it was a dual boot with WinMo. What's the OS on the NAND? WinMo, WP7 or Android? And as icke pointed out, you'll need a small SD. If you're lucky, your friend may have the original 2GB SD which came with the phone, so you could try again using that one instead.
If the smaller SD doesn't work, are you sure that you're doing everything correctly? You do have leoimg.nbh on the root of your SD card, right?
Click to expand...
Click to collapse
Android is on the phone and i want WM6.5, i want the original mobile setup.
Now i dont have leoimg.nbh anywhere i think,i did screenshot but i cant post outside links yet cause im fresh member.
I just want to know how can i have back WM6.5 on my htc hd2.
I had problems with downloading my own stock rom via my serial number from htc page so i tryed whit 10 others from other forums but neither one had worked.
Hello!
I am new here as you can see. this is not primary proplem anymore.
I installed XDAndroid GBX0C 2.3.7Build to my HTC balckstone and everything works well, but camera tells me "camera error; Cannot connect to camera."
is there any fix for that?`
and the other thing, when i boot phone it goes to win6.1 and i have to go settings etc. and boot it from haret.exe.
so am i done something wrong or something? Solved
So if somebody can help me i would be very pleased
Ps. And sorry my bad english, i just a finnish.
Edit: I try reinstall, i post is changes comes.
E: No changes, still not working.
EDIT!!!!
SO if someone can help me, place do it
E.
And this just happend, phone just stop working whit black screen.was have to took battery off, and then it took about 10-30min to boot to win again.
THIS IS PRIMARY PROPLEM.
AAAAND now it wont even start. stuck in "smart mobility"...
Please read post's for more information.
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.
Could I solve this proplem if i unlock and install custom rom? just wondering if that would help?!
Hi,
"Smart Mobility" screen
I had that problem too, and did a hard-reset.
Hold Volume Up + Volume Down buttons (hold hard) and press Power switch until you see the warning sign to confirm a hard reset.
The system will do a re-flash of the original Windows Mobile ROM.
Start Android by running HaRET from Windows Mobile
Yes, you have to run HaRET.
You can make it simpler by making a short-cut in Windows Mobile Start Menu.
Tap and hold on HaRET until you see the Dialog Box to Cut, Copy, etc.
Tap Copy.
Go to Device-Windows-StartMenu, paste as a shortcut
These steps are in the Touch HD Manual. If you do not have one, download it from the HTC website.
chan.sk said:
Hi,
"Smart Mobility" screen
I had that problem too, and did a hard-reset.
Hold Volume Up + Volume Down buttons (hold hard) and press Power switch until you see the warning sign to confirm a hard reset.
The system will do a re-flash of the original Windows Mobile ROM.
Start Android by running HaRET from Windows Mobile
Yes, you have to run HaRET.
You can make it simpler by making a short-cut in Windows Mobile Start Menu.
Tap and hold on HaRET until you see the Dialog Box to Cut, Copy, etc.
Tap Copy.
Go to Device-Windows-StartMenu, paste as a shortcut
These steps are in the Touch HD Manual. If you do not have one, download it from the HTC website.
Click to expand...
Click to collapse
I have tried hard reset, but that didn't work, and tried to put original rom too, and nothing happened. I have 2 original roms
RUU_BlackStone_HTC_FIN_1.14.414.2_Radio_52.49a.25.26_1.09.25.14_Ship
RUU_BlackStone_HTC_FIN_1.56.414.0_Radio_52.62.25.34_1.13.25.24_Ship
but those didint work. i will try today againe. and then if it going to work i will put that haret to start menu.
I'll try that 1.14 first...
flashed that 1.4 rom and waited about an hour and nothing happend... i jsut did hard reset and wait againe if it gonna boot now...
i was thinking that should i put custom rom, coz if something went wrong whit the official?
I mean if there is something wrong in phones hard drive? like something wrong whit registery or something?
something that wont let win start. if there is, how i can fix that?
masentava said:
Hello!
I am new here as you can see. this is not primary proplem anymore.
I installed XDAndroid GBX0C 2.3.7Build to my HTC balckstone and everything works well, but camera tells me "camera error; Cannot connect to camera."
is there any fix for that?`
and the other thing, when i boot phone it goes to win6.1 and i have to go settings etc. and boot it from haret.exe.
so am i done something wrong or something? Solved
Click to expand...
Click to collapse
GBX0C2.3.7 Build is on SD card.
You will need to boot from Windows Mobile first, then run HaRET to reboot to XDAndroid.
If XDAndroid hangs, you need to remove battery, put back battery and power on. Then you see Windows Mobile and do above step again.
Always, from XDAndroid to go back to Windows, you need to Power Off, and then Power On again.
chan.sk said:
GBX0C2.3.7 Build is on SD card.
You will need to boot from Windows Mobile first, then run HaRET to reboot to XDAndroid.
If XDAndroid hangs, you need to remove battery, put back battery and power on. Then you see Windows Mobile and do above step again.
Always, from XDAndroid to go back to Windows, you need to Power Off, and then Power On again.
Click to expand...
Click to collapse
I undestood that... but thats not the proplem anymore coz windows wont start, its stuck in "smart mobility"
i tryed to flash original rom's bot that didint work....
so prolem is how do i get windows back to work?
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.
masentava said:
I undestood that... but thats not the proplem anymore coz windows wont start, its stuck in "smart mobility"
i tryed to flash original rom's bot that didint work....
so prolem is how do i get windows back to work?
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.
Click to expand...
Click to collapse
You say you are flashing the original ROM. You mean the original HTC Windows Mobile 6.1 ROM? I understand you can only get this done only from HTC authorized centers.
(800) stedntf
chan.sk said:
You say you are flashing the original ROM. You mean the original HTC Windows Mobile 6.1 ROM? I understand you can only get this done only from HTC authorized centers.
Click to expand...
Click to collapse
I have
This
RUU_BlackStone_HTC_FIN_1.14.414.2_Radio_52.49a.25.26_1.09.25.14_Ship
And this.
RUU_BlackStone_HTC_FIN_1.56.414.0_Radio_52.62.25.34_1.13.25.24_Ship
Blackstone/HD Links | Guides | Stickies | Roms | Read before posting
http://forum.xda-developers.com/showthread.php?t=999925
U have to install HTC USB Sync Drivers drivers
Put the phone into bootloader by pressing volume down + power button
plug the usb cable to the computer/laptop
and then run the shipped rom executable file... when the tricolor screen displays USB at the bottom.
else extract the RUU_signed.nbh or any file with .nbh extension from the shipped file with zip viewers like 7-zip
rename the file to BLACIMG.nbh
Put into the root of memory card
put the phone into bootloader and follow the screen instructions..
And the most important thing... search the forum.. before posting..
Hope this works for you
Hi there! I think that you can't reflash even a Original ROM without unlock the phone with new Hard-SPL from Olinex ,considering that you have tried a Hard Reset and nothing happened ,your last option is to unlock the phone and reflash the ship ROM ,or to flash a custom ROM ( is not a good solution if you still have warranty,but still you cand revert your stock SPL:good so ,you have nothing else to lose , all is left for you is to try what i said before . If you don't know how to do it,let me know and i will post the exact links to instructions.
Hi all,
You can try a NAND ROM like the new release of Fagyi. There is an easy step by step manual to installation. You will lose winmo, but you will have a real android.
It looks pretty and he has solved many of the issues of previous versions.
Regards
CristianCRS said:
Hi there! I think that you can't reflash even a Original ROM without unlock the phone with new Hard-SPL from Olinex ,considering that you have tried a Hard Reset and nothing happened ,your last option is to unlock the phone and reflash the ship ROM ,or to flash a custom ROM ( is not a good solution if you still have warranty,but still you cand revert your stock SPL:good so ,you have nothing else to lose , all is left for you is to try what i said before . If you don't know how to do it,let me know and i will post the exact links to instructions.
Click to expand...
Click to collapse
well, maybe i will try to unlock, i looked some instruction, aaand didint understood
So if there is quide to dummiest dummies, so i think that would help me!
But thx to all answers!
Do a Search and read the posts
masentava said:
well, maybe i will try to unlock, i looked some instruction, aaand didint understood
So if there is quide to dummiest dummies, so i think that would help me!
But thx to all answers!
Click to expand...
Click to collapse
You need to understand what you are going to do or you may end up with a phone that does not work anymore.
Do a search of the forum and read the posts. There are so many.
http://forum.xda-developers.com/sitesearch.php?q=unlock blackstone