Hey guys been reading around and trying to get Android on HD2. I am trying to install HardSPL3 on the HD2 and it is not working correctly keep getting error message. I had Android booted on it before but when rebooted it went back to windows mobile. Anyone can please help with a user friendly guide I'm not sure with Windows mobile and could really use help please. Thank you guys.
I too had this problem and it was cause I didn't run clrcad after you run that then boot haret
Markus214 said:
Hey guys been reading around and trying to get Android on HD2. I am trying to install HardSPL3 on the HD2 and it is not working correctly keep getting error message. I had Android booted on it before but when rebooted it went back to windows mobile. Anyone can please help with a user friendly guide I'm not sure with Windows mobile and could really use help please. Thank you guys.
Click to expand...
Click to collapse
You do realise that when the phone reboots it will ALWAYS reboot into windows, right? You have to load clrcad and haret again every time (or use a bootloader, like Exceller boot loader to do this for you)
Reno_79 said:
You do realise that when the phone reboots it will ALWAYS reboot into windows, right? You have to load clrcad and haret again every time (or use a bootloader, like Exceller boot loader to do this for you)
Click to expand...
Click to collapse
Than i guess my frustration is why is it only a temporary thing? I thought with having Android on it you can have it on there for good.
No its not there for good but you can use a bootloader which prompts you to load Android or Windows when WM starts up.
I am happy because I have both so may get the option of seeing WM7 on here too
Use JMZ dual boot
This give the option of Android or Windows at boot up
http://forum.xda-developers.com/showthread.php?t=723200
Related
Hi there. I flashed my hd2 (T-MOBILE) to WP7.
Now i need flash back to winmo 6.5.*
i try looking for some thread at forum but no luck (new forum look )
can someone tell me (link) how to flash back to 6.5.* and what ROM is the best for my radio version
T-MOBILE US
T-Mobile LEORadio_2_10_50_08_2
GeneralWoo said:
Hi there. I flashed my hd2 (T-MOBILE) to WP7.
Now i need flash back to winmo 6.5.*
i try looking for some thread at forum but no luck (new forum look )
can someone tell me (link) how to flash back to 6.5.* and what ROM is the best for my radio version
T-MOBILE US
T-Mobile LEORadio_2_10_50_08_2
Click to expand...
Click to collapse
I have the same problem, I have radio 2.10.50.26 but Im having some issues with WP7 restarting itself and no data connection, so I want to flash the 2.15 radio. I think I need be running WinMo to do this, but I have no idea how to flash back to a winmo rom from WP7. Help?
Simple,
Get to the tri color boot screen (vol down + power button)
Flash your win 6.5 ROM.
Hi, I am also trying to flash back to 6.5 from WM7. Could someone please give me some more details about how to flash back? I have the 6.5 rom on my PC and can get to the boot screen no problem but if I then try and install the old rom it fails as the PC doesn't detect the phone as being connected. Any help would be much appreciated, as although I love WM7 on my HD2 when it is working, it has a habit of randomly rebooting a lot! Thanks!
Hewarmsjeans said:
Hi, I am also trying to flash back to 6.5 from WM7. Could someone please give me some more details about how to flash back? I have the 6.5 rom on my PC and can get to the boot screen no problem but if I then try and install the old rom it fails as the PC doesn't detect the phone as being connected. Any help would be much appreciated, as although I love WM7 on my HD2 when it is working, it has a habit of randomly rebooting a lot! Thanks!
Click to expand...
Click to collapse
Just keep your phone unplugged and put it in bootloader mode. After a few seconds, the bottom part of the screen should say serial. Once it says that, plug it into your computer. Serial should change to USB in a second. If your computer doesnt have a driver for it yet, it should install that. Once its done, and once your phone says USB on the bottom of the bootloader screen, you should just be able to run the rom installer on your computer and install it. Good luck!
Thanks for you help, I managed that fine, though I had also wanted to remove the Hardspl I had used to add WM7. I have tried flashing the stock ROM back (via SD card and via USB) to overwrite it, however it fails to install correctly and the phone is being very unstable. Any suggestions!?
According to the thread I used to flash HSPL to my phone, you just make sure youre running a stock rom, then run the HSPL program like you did when you first put on HSPL, but choose 2.08.0000 in the selection screen.
That said, I havent removed HSPL so Im not entirely sure what to do if that doesnt work. If thats what you tried, Im not sure what to tell you
Have tried fiddling again and think I have done it! In the boot screen it now says SPL-2.08 (hopefully this is stock!?) and the phone seems to be behaving! Cheers for your assisstance
Yup, thats stock. No problem
peace warhead said:
I have the same problem, I have radio 2.10.50.26 but Im having some issues with WP7 restarting itself and no data connection, so I want to flash the 2.15 radio. I think I need be running WinMo to do this, but I have no idea how to flash back to a winmo rom from WP7. Help?
Click to expand...
Click to collapse
You can changes Radio Roms as you wish under any OS. Just hold the Vol Down key when switching on to enter bootloader and flash via USB from there.
SMS92 said:
You can changes Radio Roms as you wish under any OS. Just hold the Vol Down key when switching on to enter bootloader and flash via USB from there.
Click to expand...
Click to collapse
Yeah, I figured that out after I flashed back to WinMo -_____- haha
Now I just need to figure out how to make Chevron communicate with my phone so I can activate WP7
peace warhead said:
Yeah, I figured that out after I flashed back to WinMo -_____- haha
Now I just need to figure out how to make Chevron communicate with my phone so I can activate WP7
Click to expand...
Click to collapse
i suggest u use windows 7 (PC) and connect to internet when you are plugging phone to pc ,so it will download the usb driver and all of your problems will disapear
imanh said:
i suggest u use windows 7 (PC) and connect to internet when you are plugging phone to pc ,so it will download the usb driver and all of your problems will disapear
Click to expand...
Click to collapse
Hmmm I actually havent tried that yet, Ive done pretty much everything aside from reinstalling windows and stuff. I shut off my wireless during the process though because I turned off my antivirus and firewall. Hopefully that will work. WP7 is nice even without being activated, but it certainly doesnt come with many apps.
Okay Guys I need help...i have the htc hd2...i put android 2.2 nand on there few months back....wanted to try WP7 hate it...problem is I can not get it to go back to 2.2 I can install it..I get usb connection problems..then it reads it as a cdma device and lables it as leo70 ..Need detailed help asap thanks in advance.
michael8780 said:
Okay Guys I need help...i have the htc hd2...i put android 2.2 nand on there few months back....wanted to try WP7 hate it...problem is I can not get it to go back to 2.2 I can install it..I get usb connection problems..then it reads it as a cdma device and lables it as leo70 ..Need detailed help asap thanks in advance.
Click to expand...
Click to collapse
You aren't trying to flash it while you're in wp7, are you? I don't see why else it would label it as a leo70. You flash while in magldr... go to the flash option in magldr, then flash the android rom. If you're doing it that way, then please state exactly what you're doing so we can figure out if you're doing anything wrong.
zarathustrax I think i know all the steps..I know I should have it in magldr.12 but when i put it in magldr.12 i keep getting a error that it wont connect even though it says usb under usb flasher. try to flash DFT nanadroid 2.2 rom then and it gives me a wrong device ID error. now after several atempts my computer and phone will not read each other and usb under usb flasher is just waiting for a connection....The phone has correct radio on it. also i can get it do the screen to say HSP 2.8 everything there is a go its just getting this darn thing to read it i guess..
zarathustrax said:
You aren't trying to flash it while you're in wp7, are you? I don't see why else it would label it as a leo70. You flash while in magldr... go to the flash option in magldr, then flash the android rom. If you're doing it that way, then please state exactly what you're doing so we can figure out if you're doing anything wrong.
Click to expand...
Click to collapse
zarathustrax I think i know all the steps..I know I should have it in magldr.12 but when i put it in magldr.12 i keep getting a error that it wont connect even though it says usb under usb flasher. try to flash DFT nanadroid 2.2 rom then and it gives me a wrong device ID error. now after several atempts my computer and phone will not read each other and usb under usb flasher is just waiting for a connection....The phone has correct radio on it. also i can get it do the screen to say HSP 2.8 everything there is a go its just getting this darn thing to read it i guess..
Sounds like there's a problem with the driver. Reinstall windows media center and see if your phone is properly recognized by your pc.
Otherwise, you could try restoring winmo 6.5 directly via sd card. Google how to do this, as I'm replying using my phone and it's a tad difficult to search the guide for you.
michael8780 said:
zarathustrax I think i know all the steps..I know I should have it in magldr.12 but when i put it in magldr.12 i keep getting a error that it wont connect even though it says usb under usb flasher. try to flash DFT nanadroid 2.2 rom then and it gives me a wrong device ID error. now after several atempts my computer and phone will not read each other and usb under usb flasher is just waiting for a connection....The phone has correct radio on it. also i can get it do the screen to say HSP 2.8 everything there is a go its just getting this darn thing to read it i guess..
Click to expand...
Click to collapse
Like person above said, make sure all drivers have successfully installed... also make sure you're giving it administative rights when running flasher. I know sometimes when I flash, the administrative permission window doesn't pop up the first time and then it gives similar errors like you're stating. If it still doesn't work, then try reflashing magldr by holding vol down when you turn on to go to bootloader, and flashing magldr installer. Might be a good idea to task 29 it, too.
zarathustrax said:
Like person above said, make sure all drivers have successfully installed... also make sure you're giving it administative rights when running flasher. I know sometimes when I flash, the administrative permission window doesn't pop up the first time and then it gives similar errors like you're stating. If it still doesn't work, then try reflashing magldr by holding vol down when you turn on to go to bootloader, and flashing magldr installer. Might be a good idea to task 29 it, too.
Click to expand...
Click to collapse
hey guys, i have the same problems machael8780, win7 treats HD2 as a CDMA device.
and i cant get it into usb mode.
i entered MAGLDR(ver1.13), choose 5 usb flasher mode, and stop there.
after that i make hd2 into 4colors screen with use connected, and i reinstalled MAGLDR 1.13. the process is ok.
but i still cant get HD2 into usb mode successfully.
Come on guys help here we are stack to win 7 !!!....a guide to go back to android please.....
110718 said:
Come on guys help here we are stack to win 7 !!!....a guide to go back to android please.....
Click to expand...
Click to collapse
So when you guys go in to tri-color "serial" doesn't change to "USB"...
Sent from my LG-P999 using xda premium
No..doesnt...windows dont see sd...
ok...i have a completely stock mogul i recently got from a friend, complete with an sdcard ready to boot android.
i just cant for the life of me figure out how to acutallly run haret.exe and every link in the wiki is dead.
i assume i'm going to have to mod something to run haret? mogul cant run it normally?
Hello guys,
Before getting frustrated about just another noob; No, I know the stuff with the volume down button, but it doesn't work (anymore) for me. I'm a noob but not a retard.
I have a very strange and frustrating problem. Like many of you I wanted to install Android 2.3 on my HTC HD2. Unfortunately I'm quite stuck. I did put radio 2.15.50.14, the 2.08.HSPL (with HSPL3_PKG), MAGLDR 1.13 and CWM (MAGLDR_CWM_Recovery_v3.0.2.5_for_NexusHD2_135M) on my device, but when I tried to install the ROM via AD Recovery the device didn't show the menu and got stuck on "go go go". That's bad, but even worse is that I couldn't enter the tri-color screen to connect via USB and restore the original stock ROM. However I did manage to boot the "Stock Android" (NAND). Only way I can still flash is via USB Flasher. I read something about cabine (.cab) files that could somehow get you in the boot loader on other HTC devices, but can't find any for the HD2.
Anybody has any idea how I can enter the bootloader and restore my original Windows Mobile?
I have been searching for hours now. I have found similar problems, but no answers are given that can solve my problem.
I hope you smart guys can help me out. Is there maybe any way that I can run Windows Mobile the "NAND-way", to connect to Windows Mobile Device Center and flash my device?
Thanks in advance,
Stef van Son
This morning I just tried the volume down again, after the phone was in the MAGLDR menu the whole night. And now i could make it to the bootloader for some strange reason. Does anybody has an explanation for this?
I'm back to Windows Mobile now and have had it with flashing for now, but maybe after my exams I will go for Android again (I hate WinMo).
StefHD2 said:
This morning I just tried the volume down again, after the phone was in the MAGLDR menu the whole night. And now i could make it to the bootloader for some strange reason. Does anybody has an explanation for this?
I'm back to Windows Mobile now and have had it with flashing for now, but maybe after my exams I will go for Android again (I hate WinMo).
Click to expand...
Click to collapse
You might want to use some of the instructions in my signature... Also check out the CoreDroid thread, we have some pretty good instruction there. Usually if you pull you battery, then turn on your phone while holding vol down button, it will boot directly into the rainbow screen.
Well, I did follow quite good instruction manuals, but at the step of flashing the new rom, my device just didn't do what it was supposed to. It's quite strange, because WinMo 6.5 just works perfectly.
And no, pulling the battery out I tried probably a hundred times...
UPDATE: MODS REMOVE THIS THREAD, FIGURED IT OUT WITH SOME MORE DIGGING, THANKS!
Ok, I have the TMO Leo, currently running Tyween's TyphooN cm7 port. I need to reset the phone and going to privacy->reset phone does nothing for me.
I tried doing a clean install of the entire rom, but I'm running into issues everywhere with magldr or the phone in general.
First off, I've downloaded both WMDC 6.1 and HTC Sync (Although htc sync doesn't load after many attempts to repair, and uninstall/installs I get the error : The Program can't start because the tlib_log.dlll is missing from your computer. Try reinstalling... Blah)
But the computer recognizes the phone's driver now.
I tried running Task29 to no avil, and then figure I'd skip that set, tried to reinstall magldr (being that booting with power down ONLY boots into the boot loader (also tried reinstalling CWM from the app on the phone, also to no avil)). The computer shows that madldr was installed successfully but, it won't launch into it. Yet I know magldr should already be there, since it's needed to load the current ROM, which works great (minus the the unable to reset thing...)
My other thought was trying to restore the phone to WM and just go from there, but being that WMDC won't recognize the phone, I can't really do that as far as I know.
Any help would be greatly appreciated! ASAP too
Side note: Need to do the whole reset because friend is currently in need of a phone, and I'd rather not give him my main phone (mytouch4g) because I'm a bit partial to it lol, don't hate on me for that please