Related
Hi all
I have installed Dutty's ROM, and sometimes its unresponsive, when i click on the screen. So I wish to flash the ROM again and install the Windows Mobile 6.5. However, I cannot connect my device through USB, its not even detecting it.
What can I do to fix this problem?
Thanks a lot for your help and advice
jmonfu said:
Hi all
I have installed Dutty's ROM, and sometimes its unresponsive, when i click on the screen. So I wish to flash the ROM again and install the Windows Mobile 6.5. However, I cannot connect my device through USB, its not even detecting it.
What can I do to fix this problem?
Thanks a lot for your help and advice
Click to expand...
Click to collapse
What have you tried? Have you pulled your USB out of Phone and PC?
Have you soft reset your phone?
Put a bit more detail and we can help
ok so first i used the Unsigned_HardSPL_for_Blackstone_OliNex with ActiveSync and that worked fine. Then I moved the BLACIMG.nbh into the BlackstoneRUUWrapper to install the new ROM, and that worked fine too, 100%. Then I removed the USB cable and restarted the device. Now I am noticing that the device is working properly for maybe 10 secs, but then it freezez, and I have to resett it
jmonfu said:
ok so first i used the Unsigned_HardSPL_for_Blackstone_OliNex with ActiveSync and that worked fine. Then I moved the BLACIMG.nbh into the BlackstoneRUUWrapper to install the new ROM, and that worked fine too, 100%. Then I removed the USB cable and restarted the device. Now I am noticing that the device is working properly for maybe 10 secs, but then it freezez, and I have to resett it
Click to expand...
Click to collapse
Usually after a flash its recommended to Hard reset atleast 2 times did you do that?
Did you follow crackwhores instructions completely?
When I have flashed I wait till the finish screen on pc shows the phone should shut down and restart itself thats when i disconnect USB
when phone shows welcome screen i pull battery out and hard reset
oh so when everything is finished, and there is the FINISH screen on the PC, you should take the battery out and hard reset! Did not do this. New to all this. Managed to connect my device again by USB, and putting Miri's WM 6.5. Will hard reset after that
jmonfu said:
oh so when everything is finished, and there is the FINISH screen on the PC, you should take the battery out and hard reset! Did not do this. New to all this. Managed to connect my device again by USB, and putting Miri's WM 6.5. Will hard reset after that
Click to expand...
Click to collapse
Cool
have a reread of crackwhore thread its very helpful
thanks mate
jmonfu said:
thanks mate
Click to expand...
Click to collapse
No Problem
I have been help all through this site
its great bunch of people
Hi Ozmoran
I still have problems with my device, first it works for a number of minutes, then freezes, then after around 5 minutes comes back to normal. And secondly, cannot get my reception to work, ie cannot receive calls and messages at the moment. Its asking me, "Do you want to turn the phone on?" and when i click on yes, nothing happens.
This is the exact procedure I am following:-
1) Unsigned_HardSPL_for_Blackstone_OliNex. After 100%, I click on Finish on the PC, and remove USB cable. I remove the battery off and on again and I hard reset (from the small button on the back right?)
2) I do the same procedure for BLACIMG.nbh and that works fine too, 100% finished.
After this, first I notice that the colours are not vivid colours, but like an old PC colours, so i turn off and on the device (from the button at the top). Then after loading, its asking me to click on the "+" to align the screen, which I do, follow the next screen, and the ROM is working.
However as I said, sometimes its unresponsive, and cannot get reception from my mobile provider.
What am I doing wrong?
Thanks a lot for your help, I am a complete newbie
ok found this thread
http://forum.xda-developers.com/showthread.php?t=505377
will follow it this eve and see what happens
Reason you are experiencing this discolourization and not reception/signal is due to you most likely not following flashing procedure properly and possibly using wrong HSPL before flashing rom.
You need to use HSPL 1.56 to flash a 1.56+ based rom. Any previous version you need to use 1.14 HSPL.
I notice you have already found cRaCKwHoRe's guide. If you follow it, you will be fine. If you get stuck, just post a query inhis thread and someone will help you!!
great
i downloaded everything from that post and will do it this evening since the phone is at home.
Hopefully I can use my phone again very soon
If you also read this section in the wiki, it refers to your greenish discolourization as well and offers assistance. Though if you follow cRaCKwHoRe's guide you'll be fine
thanks guys
any preference on any particular ROMS that are popular?
I was going to try Miri's WM6.5
jmonfu said:
thanks guys
any preference on any particular ROMS that are popular?
I was going to try Miri's WM6.5
Click to expand...
Click to collapse
Good rom to start with if you want wm6.5, would also try EnergyROM HD by NRGZ28. Both excellent roms. As for wm6.1, IMHO Duttys is the best.
For you, I would try each and make your own opinion
Thanks
Will try Miri than and see how it goes
Last question (hopefully), once I will install the Hard SPL, there is no need to install it again if I want to flash the ROM again right? Just install the ROM i want
Thanks a lot for all your help!
jmonfu said:
Thanks
Will try Miri than and see how it goes
Last question (hopefully), once I will install the Hard SPL, there is no need to install it again if I want to flash the ROM again right? Just install the ROM i want
Thanks a lot for all your help!
Click to expand...
Click to collapse
Yes, once you install HSPL its permanent and you have no need to re-install it. You can restore default SPL at a later stage if you want.
USPL is temporary and needs to be re-used before every flash to new radio or rom
If I were you, I'd read up on both USPL & HSPL in the wiki for a better understanding before you jump in head first!!
yeah i will read more about it, just wanted to experiment.
Thanks for all your help!
Hey guys
managed to do it! Flashed the ROM and working perfectly now!
Thanks a lot for your help and time
I hope someone here can help me to make my LEO work again.
Im having huge problems with my HD2 after flashing a ROM with Extendir. While setting up the device with Preset Installer my PDA went to deep sleep and failed installing all cabs.
After reboot it hung on the screen where Radio Version etc. is shown. That is why i made another Hard Reset. That let my phone boot again but after initial setup it hangs again at that place.
I tried another ROM and experienced the same problem. After that i went back to shiped with spl and radio. Not even that fixed the problem.
I tried MTTY with task 29 and reflash stock. It stays the same! After initial setup my phone sometimes hangs before or after boot animation. sometimes it boots till sense is started and hangs there.
Does anyone have a smart idea how i can make my leo run propper again?
Thanks for help.
edit: im not sure if its Extendir. It could be something else, too. I tried flashing via usb and storage card.
Ultimaex said:
I hope someone here can help me to make my LEO work again.
Im having huge problems with my HD2 after flashing a ROM with Extendir. While setting up the device with Preset Installer my PDA went to deep sleep and failed installing all cabs.
After reboot it hung on the screen where Radio Version etc. is shown. That is why i made another Hard Reset. That let my phone boot again but after initial setup it hangs again at that place.
I tried another ROM and experienced the same problem. After that i went back to shiped with spl and radio. Not even that fixed the problem.
I tried MTTY with task 29 and reflash stock. It stays the same! After initial setup my phone sometimes hangs before or after boot animation. sometimes it boots till sense is started and hangs there.
Does anyone have a smart idea how i can make my leo run propper again?
Thanks for help.
edit: im not sure if its Extendir. It could be something else, too. I tried flashing via usb and storage card.
Click to expand...
Click to collapse
to specify that rom you used in this moment and to specify that RADIo is used
I used the Lost in Asia Regular Version V0.8 and Radio 2.08.50.05 and HSPL.
At the moment i have a lover Radio version.
Ultimaex said:
I used the Lost in Asia Regular Version V0.8 and Radio 2.08.50.05 and HSPL.
At the moment i have a lover Radio version.
Click to expand...
Click to collapse
to assess that rom V.0.8 it has rom 2.0x base
radio 2,08 to enable 576 MB
the rom that it uses, it could not be compatible with the version radius
try to chnge a version radio or try to change version rom
if you use radio 2.08 from rom 2.07,try to flash rom cooked with 576 Mb enable
sorry for my poor english,i'm Italian
Sorry mate
the problem is other
I have since the rom of bob qualified V.08 is for 576 mb
You tried booting up with the SD card taken out of the device?
WB
You need to have a radio that supports the 576 mb. But I don't think this is your problem. It sound like to me your storage card is the problem. If you have another storage card format it to FAT 32 and try again. I bet your problem is solved. Also Don't use a 16gb card until you know for sure it is working. Even then there are problem with some people using them.
I dont have a Storage Card inserted now. Still the same problem
Btw. Using Laurentius V1.2 now. Same error here. i try to flash a lower Radio now.
As i said before i flashed stock 1.66 via storage card with radio and spl and still had the same Problem.
Ultimaex said:
I dont have a Storage Card inserted now. Still the same problem
Btw. Using Laurentius V1.2 now. Same error here. i try to flash a lower Radio now.
As i said before i flashed stock 1.66 via storage card with radio and spl and still had the same Problem.
Click to expand...
Click to collapse
have you try flash rom with activeSync???
Are you able to flash HSPL again? Can you confirm on the Tri Color screen it says HSPL 1.42?
bobsbbq said:
Are you able to flash HSPL again? Can you confirm on the Tri Color screen it says HSPL 1.42?
Click to expand...
Click to collapse
Everything flashes as usual. HSPL, Radio and ROMs. The software just isnt running stable after flash.
If it would be a Radio/SPL/ROM problem the stock rom should fix it.
Not wanting to be the one to say it but maybe your device is defective or damaged. Or maybe the problem was caused ny the failure going to sleep, but I don't think so. I have accidentally unplugged mine before during flash and still got it back. If you reflash the ROM it should work again. If you don't have any luck I would flash back to the Stock ROM and take it in for repair.
To bad noone can help. I will do some research and if i have no success i will send it back.
Some weeks of waiting
bobsbbq said:
Also Don't use a 16gb card until you know for sure it is working. Even then there are problem with some people using them.
Click to expand...
Click to collapse
Any sources for that?
I never read anything backing this up.
pathologo said:
Any sources for that?
I never read anything backing this up.
Click to expand...
Click to collapse
Yes there have been many. There have been some in my threads. There is also a thread posted here with lots of discussions and it was determined the the lock ups and freezes with Manila 19222911 was the 16gb cards. It seems there was only one ROM that did not have the problem and unfortunately this cook doesn't share with others.
im making improvements. after flashing stock i found out that i can change more and more settings and install programs without the need to hard reset. when i damage the filesystem with a program or setting i hardreset the device. after restart i can install that program without problems and can try another one.
seems that my device is repairing magically
Ultimaex said:
im making improvements. after flashing stock i found out that i can change more and more settings and install programs without the need to hard reset. when i damage the filesystem with a program or setting i hardreset the device. after restart i can install that program without problems and can try another one.
seems that my device is repairing magically
Click to expand...
Click to collapse
So the stock ROM is working then.
Ultimaex said:
im making improvements. after flashing stock i found out that i can change more and more settings and install programs without the need to hard reset. when i damage the filesystem with a program or setting i hardreset the device. after restart i can install that program without problems and can try another one.
seems that my device is repairing magically
Click to expand...
Click to collapse
try using the energy Rom...it works for me...all i can say, it's more stable than any other roms that i use before....
bobsbbq said:
So the stock ROM is working then.
Click to expand...
Click to collapse
I think you didn't understand. after EACH program or setting i need to hardreset.
after hardreset i can install that program as usual as all programs i did that with before.
sseems that i 'gain' more and more storage back.
Ultimaex said:
I think you didn't understand. after EACH program or setting i need to hardreset.
after hardreset i can install that program as usual as all programs i did that with before.
sseems that i 'gain' more and more storage back.
Click to expand...
Click to collapse
I guess I don't understand. You have to have a working ROM to install a program? For a stock ROM you should not have to install anything. It either works or it doesn't.
Hi guys,
I'm having trouble booting up Android on my HTC HD2 T-mobile (NL)
Whenever I boot up Android from my SD card, it goes to a black screen with some with letters on it (as it should), but after a second or two the screen fades out into blackness.
I've tried several builds and I'm experiencing the same problem over and over.
I have installed HSPL3 (2.08.0000) and updated my radio ROM to 2.14.50.04.
Still, no luck.
Do you guys have any suggestions as to solving this problem ?
I am having the same problem. :-(
GO read the fking instructions already.
INSTALL A ANDROID COMPATIBLE RADIO anything 2.08 or above if that wont work try ANOTHER radio until it wil work.
shuntje said:
GO read the fking instructions already.
INSTALL A ANDROID COMPATIBLE RADIO anything 2.08 or above if that wont work try ANOTHER radio until it wil work.
Click to expand...
Click to collapse
Clam down. He already has installed the newest radio.
Just try 2.12
@shuntje
Quit nerdraging and start reading correctly.
JanssoN said:
Clam down. He already has installed the newest radio.
Just try 2.12
Click to expand...
Click to collapse
Thanks for your advice. I'll try that right away and post the outcome shortly after.
Hey all,
Maybe someone can help me out.
Two weeks ago i installed andoid on my HTC HD2.
I used HPSL, radio 2.15.50.14, MAGLDR112 and NexusHD2-Gingerbread_V2.1_NAND. A few days ago, without any reason i got a white bootscreen and i still have it
What a did so far:
* New HSPL3, but the radio didn't connected anymore, error 270.
* A new MAGLDR, i reached 100% in a blink, but then an error 270.
* Using a SD with the original leoimg, i get a (00018003 radio fail) error after a few % and the update failed.
* task29, but again no connection. (after 5 min error 262)
* new USB drivers installed for windows 7 and i also tried it on an windows Xp computer.
So far i only reached my 4 colored screen with:
PB81100 HX-BC
SPL-2.08. HSPL 8G XE
0x05
CotullaHSPL 0x30
* The original rom was RUU_Leo_S_HTC_NLD_3.14.404.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
Last question, how can i check that the batttery is stil oke for flashing.
Anyone who has a clue what to do?
Thanks in advance.
greetz!
Rob
Mate, I think you´ve done everything. HSPL and Radio ROM versions correct etc.
Since I see more and more people reporting similar problems like you, I get the feeling that some Android builds might have some strange effects on Radio ROMs.
There are too many people with SPL and Radio ROM problems, eg. stuck in bootloader or at the white startup screen.
This didn´t happen at this pace before Android NAND.
Only 1 question though:
Did you try to flash the original ROM using RUU.exe, SSPL or LeuCustomRUU via USB, without having the SIM and the SD card inserted? In rare cases, either one or both were trouble makers...
EDIT: Second question:
What kind of SD card did you try? Bigger cards seem more problematic, too.
I used a 2 gb micro SD card to go back to the original Rom.
I didn't tried to go back to original ROM using USB, because of the connecting problems. So that i'm gonna do now. Any suggestions which to use best?
After your post i tried to the flash with (and without) the formatted sd and the simcard, unfortunatelly i didn't work.
For last your question i can say that connect your phone to PC when it is off. Then keep down "volume down" button and switch on your phone. You get 4 colored screen. On bottom you can see USB word. Let phone for minimum 1h. And you get more 50% charged battery.
After hour you can flash back to original rom or to MAGLDR and forward normally flash android nand. You dont need disconnect or switch off before flash your phone.
Hope helps.
@tictac0566
Thanks for the options!
I tried the options mentioned in question 1, the problem is the connection USB/Radio. SSPL seems to work, but after 1% again connection error.
After a few test it must be the radio.
I tried to flash only a new radio using LEOIMG, after 99% i get the same error as LEOIMG an original Rom (00018003 radio fail)
With HPSL3_PKG i also can't go back to SPL 2.08.000.
So the problem must be there.
Anyone has an idea?? Can i use another radio? If yes, than which?
Thanks!
Still no solution
Tried many things, still the radio is not working.
It could be also HPSL3, because i can't go back to spl 2.08 (or any other (h)spl with the app.
Anyone has an idea??
Just trying to help here, but have you tried doing everything from the start?
task29 and everything else?
Hey i seem to have the same problem as you except my white screen wasnt after a flash, it just randomly went white one day and wouldnt boot.
I have tried MTTY, i can connect via usb but after formatting via MTTY and then attempting to flash a new rom (ship and custom) it just stays on 0% and doesnt do anything else.
Sorry to hijack thread just thought whilst people are looking they can help me too
CrAzYiaN said:
Just trying to help here, but have you tried doing everything from the start?
task29 and everything else?
Click to expand...
Click to collapse
Yes i did, this thread is official mine
It must be the radio or else HSPL3_PKG.
Do you have some options??
Thanks in advance!
tomar5e said:
Hey i seem to have the same problem as you except my white screen wasnt after a flash, it just randomly went white one day and wouldnt boot.
I have tried MTTY, i can connect via usb but after formatting via MTTY and then attempting to flash a new rom (ship and custom) it just stays on 0% and doesnt do anything else.
Sorry to hijack thread just thought whilst people are looking they can help me too
Click to expand...
Click to collapse
Can you go into bootloader? If you can then your problem can be solved. The problem you are having might have been because you unintentionaly installed or uninstalled a programm and that corrupted your rom.
To both of you. Try to flash using the leoimg.nbh step. If it doesn't work then the rom you used is not compactible with your device, try another till you find one that will work with your device. I know it is tiring to do something like that, here a tip from me, the rom you are expected to use in this process must be in the native language of your phone or else it will not work. You can't just use any stockrom to do it. I hope it helps.
Abdul9. said:
Can you go into bootloader? If you can then your problem can be solved. The problem you are having might have been because you unintentionaly installed or uninstalled a programm and that corrupted your rom.
To both of you. Try to flash using the leoimg.nbh step. If it doesn't work then the rom you used is not compactible with your device, try another till you find one that will work with your device. I know it is tiring to do something like that, here a tip from me, the rom you are expected to use in this process must be in the native language of your phone or else it will not work. You can't just use any stockrom to do it. I hope it helps.
Click to expand...
Click to collapse
Thanks for the advice, but all the roms i tried i got a radio fail during flashing with leoimg.nbbh.
Maybe your HSPL is faulty ? Did you try to re-HSPL your device using HSPL.exe ?
kawazaki said:
Maybe your HSPL is faulty ? Did you try to re-HSPL your device using HSPL.exe ?
Click to expand...
Click to collapse
Yes i tried, but mine HD2 stays on SPL-2.08 HPSL.
I used HSPL3_PKG and HSPL2 in different but still SPL-2.08 HSPL.
Maybe there's where my problems are, but i als can be an corrupt radio.
Anyone an other way to back to SPL 2.08.000 or how to fix the radio?
Then your best bet is to flash with a goldcard
Abdul9. said:
Can you go into bootloader? If you can then your problem can be solved. The problem you are having might have been because you unintentionaly installed or uninstalled a programm and that corrupted your rom.
To both of you. Try to flash using the leoimg.nbh step. If it doesn't work then the rom you used is not compactible with your device, try another till you find one that will work with your device. I know it is tiring to do something like that, here a tip from me, the rom you are expected to use in this process must be in the native language of your phone or else it will not work. You can't just use any stockrom to do it. I hope it helps.
Click to expand...
Click to collapse
Yes i can get into bootloader. I have tried using MTTY task 29 to format the device then i searched on the HTC site for a compatible ROM. Turns out the only one that doesnt give a negative response when i type in my serial number is the ROM from Taiwan. Tried flashing that using the SD card method and the USB method. Sd card method hangs at 0% and i get a connection error in USB method. I have also tried the latest ROM from Dutty.
If a ROM is not compatible how do you know? Does it hang at 0% or does it finish loading and then wont boot from there.
I have even tried flashing just a radio with the same results.
kawazaki said:
Maybe your HSPL is faulty ? Did you try to re-HSPL your device using HSPL.exe ?
Click to expand...
Click to collapse
Yes i tried all different types of HSPL and even SSPL. From the bootloader screen i run the .exe from the computer and it goes through and says 'operation finished successfully'
But when i get back to the bootloader it still says the same HSPL, which is 1.66
Also to note when i power on the device i can hear a small 'click' from it. Could be much worse and be a hardware problem?
Still no solution.
Oke guys, thanks for answering my threat so far!
Still trying to get my HTC back to life.
Is it possible that my problem is in HSPL? (see attachments)
After the white screen i tried to reinstall HPSL 2, 3 and 1, but during the instal my HTC reboot (without the signal "We Hacked It"
I also tried different SD card for LEOIMG, still radio fail 00018003.
One thing i didn't tried is using a goldcard, i downloaded the app but i need a working HTC HD2 to make the card.
Anyone?
No you don't, there you go :
http://forum.xda-developers.com/showthread.php?t=874304
Goldcard is the old method to install a custom rom way before HSPL became popular
so if HSPL don't work then Goldcard wont as well but hey you can still try
I think its more of a hardware problem now since all attempts for software repair is not successful. I had the same situation as yours, white screen then radio fail, tried all solutions but still no luck
sameeeeee
i have the same problem 100%
i already try all these solution and no one is worked
however, some one told me that maybe the problem with the Flash memory of my HD2 because he already try to solve / or already solve such problem "but unfortunately he lost the tools he was used"
this tools is can check the memory and told which memory chunk is corrupted
please if any one know this tools or had it please posted it on.....
That app should be Task 29.
Just got a new phone, worked fine, put in my sim and sd, all was working perfect, then I went to music selection and it saw my songs on my sd card, i started playing one, the phone froze and just played the last note like its stuck on it, all buttons would not work.
I took off the battery put it back on now when i power up it just sits on the white and purple screen that says " stick together" the tmoblie logo, and wont move from there.
Removed battery a few times same thing, pressed the little hard boot button same thing.
Any advice?
thank you in advance.
The "little button" is the same as pulling the battery.....a soft reset.
You should try a hard reset, and failing that a fresh flash.
samsamuel said:
The "little button" is the same as pulling the battery.....a soft reset.
You should try a hard reset, and failing that a fresh flash.
Click to expand...
Click to collapse
Thank you,
Can you tell me how to do a hard reset? the steps
Also how do you fresh flash?
I did a search but the threads i found were hard to follow,
just need simple steps
http://www.youtube.com/watch?v=Wq64BzDLTvU:D
erikvario said:
http://www.youtube.com/watch?v=Wq64BzDLTvU:D
Click to expand...
Click to collapse
thank you, now when you do that, does it reset the phone to factory settings?
or keep those as I set them?
it will set the phone to factory settings.
Sounds like you're using stock. Stock never boded well with me either, so maybe you should try a custom rom. Search on the how to's, you'll learn something.
Kailkti said:
Sounds like you're using stock. Stock never boded well with me either, so maybe you should try a custom rom. Search on the how to's, you'll learn something.
Click to expand...
Click to collapse
Been using the stock ROM on my old phone for a while never had any one of the many problems that ppl have listed on this forum, but I cracked the screen and got a new one, and just ran into that problem.
Took the battery off and let it sit for a few, put it back in and now it loads and works, just odd, how that happen, haven't put my card back in yet but well test again hopefully it wont do it again.
don't mean to hijack but im facing the same problem
but mine is a world wide hd2. it freezes on the HTC screen
when i try flashing a rom from the bootloader (using RUU), it always gives me a image corrupted error message.
i also can't flash a new radio. error 00018003 occurs when trying to flash a new radio.
currently i have ENERGY rom loaded into it but won't start. stuck on the NRG loading screen
froibet said:
don't mean to hijack but im facing the same problem
but mine is a world wide hd2. it freezes on the HTC screen
when i try flashing a rom from the bootloader (using RUU), it always gives me a image corrupted error message.
i also can't flash a new radio. error 00018003 occurs when trying to flash a new radio.
currently i have ENERGY rom loaded into it but won't start. stuck on the NRG loading screen
Click to expand...
Click to collapse
Have you had your HD2 flashed with HSPL?
K so its happening more and more now, some times it gets to the Launching HTC Sense part of the boot and then shuts off and tries to reboot.
Any one seen this before or know a fix?
Or just doomed?
rysky007 said:
K so its happening more and more now, some times it gets to the Launching HTC Sense part of the boot and then shuts off and tries to reboot.
Any one seen this before or know a fix?
Or just doomed?
Click to expand...
Click to collapse
the original HD2 came with defected sdcards so if your using the one it came with then that's why it might freeze...
custom roms are better at using the phones resources... just cuz the old one worked fine with stock doesn't mean this one would
achen_you said:
Have you had your HD2 flashed with HSPL?
Click to expand...
Click to collapse
yes. SPL 2.08.HSPL Cotulla HSPL
i just tried task 29'ing it and still no luck. as well as mtty
whenever it hits Radio_V2, it gives me an error 00018003.
hakuchi18v said:
the original HD2 came with defected sdcards so if your using the one it came with then that's why it might freeze...
custom roms are better at using the phones resources... just cuz the old one worked fine with stock doesn't mean this one would
Click to expand...
Click to collapse
No using a diff 16 gig sd card, and even when i take it out it still does it,
The problem with the custom roms, I dont like how most of them look and dont want to spend all the time installing diff ones to see if I like it or not, dont have the knowledge or the time for it.
I am fine with the standard HTC sense, just want to figure out why this one keeps crashing on load, what the conflict is.
rysky007 said:
No using a diff 16 gig sd card, and even when i take it out it still does it,
The problem with the custom roms, I dont like how most of them look and dont want to spend all the time installing diff ones to see if I like it or not, dont have the knowledge or the time for it.
I am fine with the standard HTC sense, just want to figure out why this one keeps crashing on load, what the conflict is.
Click to expand...
Click to collapse
maybe u can download the TMobile HD2 rom from their website. you need to put in your IMEI to download. after that, from what i did with my tmous before, was enter bootloader then run the utility and it should work perfectly.
if it still doesn't boot up then im suspecting a hardware issue?
froibet said:
maybe u can download the TMobile HD2 rom from their website. you need to put in your IMEI to download. after that, from what i did with my tmous before, was enter bootloader then run the utility and it should work perfectly.
if it still doesn't boot up then im suspecting a hardware issue?
Click to expand...
Click to collapse
U got a link to the rom? or were I can find it?
Also were is a good set of instructions on how to install roms.
the link is the tmobile website. just look for hd2. dont be lazy
for roms, it uses a utility. all u gotta do is press next.
hi brother
my phone have the same issue as u have so any solution you find regarding ur htc hd2 please tell me i am waiting for your response
thanks in advance
if u can give me a favor please mail on that email address
[email protected]
froibet said:
yes. SPL 2.08.HSPL Cotulla HSPL
i just tried task 29'ing it and still no luck. as well as mtty
whenever it hits Radio_V2, it gives me an error 00018003.
Click to expand...
Click to collapse
wrong radio rom flashed?
rysky007 said:
Just got a new phone, worked fine, put in my sim and sd, all was working perfect, then I went to music selection and it saw my songs on my sd card, i started playing one, the phone froze and just played the last note like its stuck on it, all buttons would not work.
I took off the battery put it back on now when i power up it just sits on the white and purple screen that says " stick together" the tmoblie logo, and wont move from there.
Removed battery a few times same thing, pressed the little hard boot button same thing.
Any advice?
thank you in advance.
Click to expand...
Click to collapse
Bricked is when you flash the wrong radio, like I did, and your power button will not work. Phone will not power up at all.