Related
Cliff Notes, i saw this thread on the update to DG27, but I need to know if there is a short cut to get to the newest build or if Froyo will be unable to get without the playing catch up
I did some searching, but if you can forward any information there is about this, that would be helpful and a moderator can delete this...
I looked today at my gf/s epic and noticed she was on build version DG17, and from what I understand, this is old. I cannot find anything on the sprint website found here, so I took er to the sprint store for an update, and all these dolts kept saying is Froyo is not out yet, you need to wait, not listening to anything I was actually saying. After they began to listen they said she is literally stuck, SOL with the version she has until Froyo is released for her device, and that Sprint and Samsung have no updates for her device. Furthermore, whenever I check for an update on her device it always says it is up to date. So, after getting annoyed I came here for help.
I did read somewhere on this forum that being on the older build version causes issues with future updates. If this is true, will she be able to get Froyo if it ever comes out, and is it a good idea to to the updates in between (S:D700.0.5S.DG27 8/30/2010, S:D700.05S.DI07 9/16/2010, S:D700.05S.DI18 9/30/2010, etc), and, if it is possible to manually update the Epic, how does one do it? Once the morons at the sprint store started listening they said There was nothing I can do but wait for Froyo, but I did not instill much trust in them.
Thanks,
Carl
P.S. Please don't flame me, I know very little about the Epic and even less about working with it, but I am capable of doing the update, with your help, of course.
Here use this. Use Odin to go to di18 which is where she needs to be to get froyo ota. Unless you want the leak which works great for me it's dk28. http://forum.xda-developers.com/showthread.php?t=794138. Yeah for some reason you are still on the launch day software. You are 3 updates behind. Use that link to dl Odin and download whichever rom you want dk28 for 2.2 or di18 for 2.1 and use Odin to flash. You will wipe all data and it will be like getting a brand new phone. Just follow the instructions exactly how they are written. Good luck.
you can update your epic regardless of what version you're on to the current official build (DI18) which is "Eclair" and fixes many of the original issues with the phone. You you can also go straight to an update to the newest unofficial build (DK28) "Froyo" but this will make you unable to receive the official Froyo OTA update. But take note that the OTA update is not important as the developers on this site will most definitely provide superior alternatives to updating to Froyo when the OTA update eventually does become available (it has been delayed yet again).
THIS WILL DELETE ALL THE DATA ON YOUR PHONE
*Assuming that you want to return to the current official build used by sprint which is at this moment DI18*
*Only use main/direct-to-motherboard USB slot on PC (not on the face of your PC)*
*Only use high quality USB cable shorter than 3' and not the stock cable*
*Make sure SAMSUNG USB drivers are Installed*
*Make sure your battery is more than 50% charged*
1. SD Card is REMOVED, USB is UNPLUGGED and Battery is REMOVED from phone
2. While Phone is UNPLUGGED from USB, place battery in phone
3. Press and Hold the "1" key and Power button together to reach Download Mode
*KEEP USB UNPLUGGED FROM PHONE and phone in Download Mode*
4. Extract and Run Odin3.exe (Ignore the .pit file included in Odin3+v1.61andepic.pit.zip)
*Leave the "PIT" selection empty*
5. In Odin Uncheck "F. Reset Time", make sure "Auto Reboot" is the only box checked
6. In Odin click PDA and select your .Md5 file (SPH-D700-DI18-8Gb-REL.tar.md5)
7. Plug USB in PHONE and wait for yellow COM box highlight to appear in Odin
8. In Odin Press Start and WAIT patiently
Download SPH-D700-DI18-8Gb-REL.tar.md5 from the link on the first page of this thread where it says DI18 Update:
http://forum.xda-developers.com/showthread.php?t=794138
Download Odin from the link on the Wiki --look for "Odin3+v1.61andepic.pit.zip" under where it says "Odin Stock Flashing" at:
http://forum.xda-developers.com/wiki...Stock_Flashing
Download Samsung USB drivers from the link on the first post of this thread:
http://forum.xda-developers.com/showthread.php?t=770388
so either way she cannot get it re sync'd back to do it on its own? is that what I'm gathering? I hope that is untrue. And either option she has to wipe her phone? The people at sprint said wait for Froyo but she needs to get to DI18? This is all a bit confusing.
cabrone1 said:
so either way she cannot get it re sync'd back to do it on its own? is that what I'm gathering? I hope that is untrue. And either option she has to wipe her phone? The people at sprint said wait for Froyo but she needs to get to DI18? This is all a bit confusing.
Click to expand...
Click to collapse
Without DI18, you won't be able to get the OTA for DL11, which is final froyo. You will have to use odin, and yes it will wipe the phone. Just backup contacts to your Google account and use Titanium Backup for the apps.
Sent from my SPH-D700 using XDA App
thomasskull666 said:
Without DI18, you won't be able to get the OTA for DL11, which is final froyo. You will have to use odin, and yes it will wipe the phone. Just backup contacts to your Google account and use Titanium Backup for the apps.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
This isn't entirely true.
There will be an update for DI18 -> DL** out soon-ish. However, an update from DG27 and whatever the other one is will be available *eventually*. How long eventually is unknown and could be forever.
I thought there was a di18 update zip floating around here that he can flash threw the stock recovery?
What I suggest is root the phone in question and install clockwork mod recovery. One cwm is installed you can make a nandriod back up. Use odin and the di18 tar to get to di18. Root and install cwm again. Restore tory back up with selecting data only. Now your up to date with apk your data. You are also rooted and have cwm installed and you won't be blocked from an ota unless you start flashing custom roms and removing stock apps
Sent from my SPH-D700 using Tapatalk
You can have her phone on di18 in five mins. Them it would take her no mre than ten mins to set it back up. All her contacts are saved and all she has to do is reinstall her apps. It doesn't take that long. Plus the update to di18 update takes the upload cap off.
DevinXtreme said:
This isn't entirely true.
There will be an update for DI18 -> DL** out soon-ish. However, an update from DG27 and whatever the other one is will be available *eventually*. How long eventually is unknown and could be forever.
Click to expand...
Click to collapse
Very true, eventually being the key word lol. If you do want the OTA right off the bat though, DI18 is the way to go. Mystery, I thought I saw that floating around as well, I just worry about the Modem.bin being flashable in clockwork; as of yet I don't know if anyone has been able to accomplish that. But with Koush's help it could be possible.
Sent from my SPH-D700 using XDA App
Isn't DG17 to di18 just a firmware update? You only click android update in the settings when going from android 2.1 to 2.2 (software update). I don't think he needs to go to the trouble of using odin.... I could be wrong but its give that a try if you haven't already.
Sent from my SPH-D700 using XDA App
Shadomastr said:
Isn't DG17 to di18 just a firmware update? You only click android update in the settings when going from android 2.1 to 2.2 (software update). I don't think he needs to go to the trouble of using odin.... I could be wrong but its give that a try if you haven't already.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Of you read his post right you would realize he is on dg27 witch was the release firmware. He is 3 updates behind do clicking on check for updates will not work and amazingly he already tried that already
Sent from my SPH-D700 using Tapatalk
Yeah what he said. ^^^^^^^
mysteryemotionz said:
I thought there was a di18 update zip floating around here that he can flash threw the stock recovery?
What I suggest is root the phone in question and install clockwork mod recovery. One cwm is installed you can make a nandriod back up. Use odin and the di18 tar to get to di18. Root and install cwm again. Restore tory back up with selecting data only. Now your up to date with apk your data. You are also rooted and have cwm installed and you won't be blocked from an ota unless you start flashing custom roms and removing stock apps
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
Does anyone know of a step by step instruction for this? thanks!
musclehead84 said:
You can have her phone on di18 in five mins. Them it would take her no mre than ten mins to set it back up. All her contacts are saved and all she has to do is reinstall her apps. It doesn't take that long. Plus the update to di18 update takes the upload cap off.
Click to expand...
Click to collapse
What is the upload cap? My phone is currently rooted and with CWM but still at DG17. Thanks.
Will DG17 prevent Froyo? At this point you first need to worry about Sprint and Samsung preventing Foyo and at the moment they are doing a very good job.
juejaimon said:
Does anyone know of a step by step instruction for this? thanks!
Click to expand...
Click to collapse
Please see timothylaws post on page one of this thread or if you want to watch a video I don't have the thread handy but it is courtesy of Randyshear on Youtube. I hope I don't get in trouble for saying this but I would suggest subscribing to his youtube page. He is very informative.
musclehead84 said:
You can have her phone on di18 in five mins. Them it would take her no mre than ten mins to set it back up. All her contacts are saved and all she has to do is reinstall her apps. It doesn't take that long. Plus the update to di18 update takes the upload cap off.
Click to expand...
Click to collapse
please help. LOL. I Wonder if it is something sprint can handle once froyo is the standard for the epic and i show them she does not have it, can they just push it on to it? If not, i'd love to have instructions or something from you, please
Update. So after the rumors of the upcoming froyo release, can sprint push it when the device does not get the triggered update? Or can the morons at the sprint store do this?
Sent from my EVO using XDA App
I thought about rooting, and started the process with the one click mod about a month ago. I got the superuser app in the process. Never went any further. Now I am trying to download the official froyo (which is technically on hold), but it aborts everytime. I am wondering if the superuser or CWM is causing this. I have done a wipe/factory reset three times. Any suggestions? Thanks.
jkmola said:
I thought about rooting, and started the process with the one click mod about a month ago. I got the superuser app in the process. Never went any further. Now I am trying to download the official froyo (which is technically on hold), but it aborts everytime. I am wondering if the superuser or CWM is causing this. I have done a wipe/factory reset three times. Any suggestions? Thanks.
Click to expand...
Click to collapse
I'd suggest updating by using the official Samsung update on their web site, which you can run from a PC. It seems to provide a much more trouble free update. It will also totally wipe your phone (but not the SD card) so be sure you have a way to restore your data.
http://www.samsung.com/us/support/downloads/SPH-D700ZKASPR
Assuming you have a PC, click on the software link, then click on the EXE link for the EB13 update. Install on your PC and follow the directions.
odin back to stock, use eb13 in the pda slot you will have a stock updated phone
i would also advise against updating ota because it's my understanding that it was problems with the ota process that caused sprint to pull the plug. it's really hard to adequately stress how simple using the samsung exe is. if you can turn on a computer you can have a fresh installation of eb13 froyo
wait for the actual fixed release from either sprint or samsung and use either the samsung tool or odin to do a clean install.
I have 2 Epics, one stock, one rooted and rommed. I ran the Samsung .exe
and it caused nothing but troubles on the stock, so had to return to 2.1.
To do so, either go to Service Center or run Odin.
This will also work to unroot and return to stock. The easiest instructions I have found to follow are on Android Central under Epic Forums. Look in Roms and Rooting Section in stickies. Title is something like unbrick. It gives all the links for downloads and how to's. You must be registered to use
but it is less techy there so might be easier to follow.
Thanks, everybody. I just finished the update via the samsung site. Phone just came back online. I will start messing around with it and see how everything worked out. Thanks again!
ilostmypistons said:
odin back to stock, use eb13 in the pda slot you will have a stock updated phone
Click to expand...
Click to collapse
When you odin all you put is the eb13 file in pda and nothing else? No pit? Also where can you get the eb13 stock tar?
Sent from my SPH-D700 using XDA Premium App
ErlyD said:
When you odin all you put is the eb13 file in pda and nothing else? No pit? Also where can you get the eb13 stock tar?
Click to expand...
Click to collapse
You get it right out of the installed .exe file you installed to.
Sent from Bonsai 6.0.3
Just made a video for everyone on updating to stock EL30. I'll be doing more videos on El30 for sure.
How to Manually Update the Samsung Epic 4G to Stock EL30 Gingerbread:
http://www.youtube.com/watch?v=B3bccIXQSrU
Review of EL30 (There are some changes):
http://www.youtube.com/watch?v=30cW2WhL0KA
HOW TO ROOT ON EL30:
http://www.youtube.com/watch?v=kwFRzzIqouE
OP updated
Super fast with the vids as always! Thanks!
Oh...and first!
Has anyone experienced the boot loop issue like the last manual update to 22? I had to wipe my phone to fix...
Not sent from my Sprint Galaxy Nexus
If you did did the GPS Fix (assuming you're on stock BML EI22), then you will need to replace the system/vendor/bin/gpsd file or else you will get an Error Status 7 when you try to do the update. You can extract the file from the EI22.zip (If someone can post the file and host it, even better).
I haven't tested the GPS after updating so I don't know if the new gpsd file fixes anything or reverts things back to what they were (ie locking on only 3 or 4 sats). If it has reverted it back, then you will probably have to re-run the GPS Fix again.
i got an error "verifying the script(?)" i forgot the complete error message when i tried to install it from stock ei22 and stock recovery.
Do you think it has to do with the fact that I downloaded within the phone's webbrowser, and renamed it in ES explorer within the phone?
I have trouble mounting my phone to my computer, so i either have to download files to my phone directly from within its own webbrowser, or take the sd card out and mount that seperatly.
@qbking77: you don't need to rename the update file to update.zip since the GB roms the stock reccovery allows you to choose what zip to use.
For me I copied both updates to my card as update.zip, EI22 and update-EL30.zip then I:
1- ODIN'd to EC05
2- shutdown
3- 3 finger salute
4- flashed update.zip (EI22)
5- shutdown
6- 3 finger salute
7- flashed update-EL30.zip
After that I:
A- copied the su.zip that removes the reinstall of stock recovery,
B- ODIN'd cwm 3 but unchecked reboot.
C- pulled battery
D- 3 finger salute
E- flashed the aboved mentioned su.zip
F- flashed cwm5
G- rebooted
That left me with a stock kernel with root and custom recovery. Made a NANDROID and have been tinkering with it.
Right now I'm tring to get CRT-OFF to work.
Sent from my SPH-D700 using Tapatalk
futureprospect said:
i got an error "verifying the script(?)" i forgot the complete error message when i tried to install it from stock ei22 and stock recovery.
Do you think it has to do with the fact that I downloaded within the phone's webbrowser, and renamed it in ES explorer within the phone?
I have trouble mounting my phone to my computer, so i either have to download files to my phone directly from within its own webbrowser, or take the sd card out and mount that seperatly.
Click to expand...
Click to collapse
I recomend to mount the card seperatly or use airdroid from the market to transfer files from your comp to phone over wifi
Sent from my SPH-D700 using Tapatalk
futureprospect said:
i got an error "verifying the script(?)" i forgot the complete error message when i tried to install it from stock ei22 and stock recovery.
Do you think it has to do with the fact that I downloaded within the phone's webbrowser, and renamed it in ES explorer within the phone?
I have trouble mounting my phone to my computer, so i either have to download files to my phone directly from within its own webbrowser, or take the sd card out and mount that seperatly.
Click to expand...
Click to collapse
nevermind. I dled a curropt file. After redownloading it worked.
Thanks qb for the review and install. Btw ei22 had the loop-scrolling home screens too, but no biggie.
thanks for the post qbking. So seems like no real reason to update if you arnt using a stock rom?
Updated OP... Use the SAME method to root as EI22!
qbking77 said:
Updated OP... Use the SAME method to root as EI22!
Click to expand...
Click to collapse
Plus Toadlife has a prerooted kernel for this over in development which should help.
Sent from my SPH-D700 using XDA App
Do I need to unroot before I update?
Falhawk said:
Do I need to unroot before I update?
Click to expand...
Click to collapse
That is what the procedure does, yes.
Toadlife has both ODIN + Heimdall stock packages pre-loaded w/ kernel............these'll be especially useful to us folk that need to ODIN back to stock from MTD set-ups........then back up the chain to EL30 firmware.
Sent from my SPH-D700 using xda premium
Ok I am rooted but I have the stock EI22 Gingerbread, Firmware 2.3.5 and Kernel 2.6.35.7. I recieved my update today. Forgive me I am a noob. Do I still have to unroot this to complete stock or simply update my phone over the air?
I have the ACS Recovery V1.0.0.5 CWM4 based.
fatstrat67 said:
Ok I am rooted but I have the stock EI22 Gingerbread, Firmware 2.3.5 and Kernel 2.6.35.7. I recieved my update today. Forgive me I am a noob. Do I still have to unroot this to complete stock or simply update my phone over the air?
I have the ACS Recovery V1.0.0.5 CWM4 based.
Click to expand...
Click to collapse
No update from Sprint will ever work on a rooted phone.
Sent from my SPH-D700 using XDA App
brooksyx said:
thanks for the post qbking. So seems like no real reason to update if you arnt using a stock rom?
Click to expand...
Click to collapse
Even if you're using a stock rom I don't see much benefit in upgrading. GPS was still broken for me and they changed/removed things I liked in the older stock roms (ie: incoming call screen, the alarm screen [took me a while to figure out how to snooze this morning which meant I got to work on time ;-)], the scrolling wallpaper). All minor things but I didn't have any issues with EI22 so...
What's that EI29 build you have in your downloads folder, qbking77?
Mutiny32 said:
What's that EI29 build you have in your downloads folder, qbking77?
Click to expand...
Click to collapse
E4gt
Sent from my SPH-D700 using Tapatalk
I'm trying to update to 2.2.2, I downloaded and installed the first update, and I can successfully download the froyo update, but it won't go all the way through. It will finish downloading, prompt me to install, then power down to install, but when it installs it gets to about 35%, then shows the triangle with the ! In it and reboots. I'm rooted with stock everything, and have system reset twice hoping it would work. No luck.
Is anyone else having similar problems?
Sent from my SCH-I400 using XDA
JoshRoss70 said:
I'm trying to update to 2.2.2, I downloaded and installed the first update, and I can successfully download the froyo update, but it won't go all the way through. It will finish downloading, prompt me to install, then power down to install, but when it installs it gets to about 35%, then shows the triangle with the ! In it and reboots. I'm rooted with stock everything, and have system reset twice hoping it would work. No luck.
Is anyone else having similar problems?
Sent from my SCH-I400 using XDA
Click to expand...
Click to collapse
I had the same problem at first, but then this is what i did:
flashed ec07 odex
flashed dl17 odin image
then i just restarting the ota
If you still cant get it to work you can always flash the cwm files or odin files in the development section. But i would try ota first
abby_nitewolf said:
I had the same problem at first, but then this is what i did:
flashed ec07 odex
flashed dl17 odin image
then i just restarting the ota
If you still cant get it to work you can always flash the cwm files or odin files in the development section. But i would try ota first
Click to expand...
Click to collapse
Okay, couple of questions:
1. What would flashing the ec07 odex do?
2. What exactly does OTA stand for?
JoshRoss70 said:
Okay, couple of questions:
1. What would flashing the ec07 odex do?
2. What exactly does OTA stand for?
Click to expand...
Click to collapse
It would put any files that were missing, or deleted back on, including script files, bin fiiles etc.
OTA stands for Over The Air
Txwolf1980 said:
It would put any files that were missing, or deleted back on, including script files, bin fiiles etc.
OTA stands for Over The Air
Click to expand...
Click to collapse
What she said
Sent From My Rezound using Tapahoe
Txwolf1980 said:
It would put any files that were missing, or deleted back on, including script files, bin fiiles etc.
OTA stands for Over The Air
Click to expand...
Click to collapse
Okay, well before I started, I flashed the dl17 default image.
Sent from my SCH-I400 using XDA
JoshRoss70 said:
Okay, well before I started, I flashed the dl17 default image.
Sent from my SCH-I400 using XDA
Click to expand...
Click to collapse
abby_nitewolf said:
What she said
Sent From My Rezound using Tapahoe
Click to expand...
Click to collapse
What SHE said?! Listen you....
Josh, I'd grab the ec07 odex, flash it with PIT file (repartition off), then dl17 odex, flash it with no PIT file then try the OTA
I have the same prob. Is it failing, do you think, because the phone is rooted? I haven't tried any reimaging, just rooting.
bsmith1051 said:
I have the same prob. Is it failing, do you think, because the phone is rooted? I haven't tried any reimaging, just rooting.
Click to expand...
Click to collapse
Your problem is probably due to the current ROM you're using has removed some of the bloatware. When you remove bloatware you are unable to update your phone.
Sent from my SCH-I400 using XDA
Actually I'm not running a custom ROM. Literally all I've done was run a root tool, then installed Titanium Backup Free.
I'm going to try and re-image the phone using the stock DL17 but I'm not sure how. I've got the instructions for installing the rooted EC09 ROM but I don't think I'm supposed to use the I500.PIT? Is that specific to EC09, or is it specific to the phone model (and independent of ROM)?
UPDATE: I just realized there's a DL17 .PIT so nevermind! I'll be sure to use that.
bsmith1051 said:
Actually I'm not running a custom ROM. Literally all I've done was run a root tool, then installed Titanium Backup Free.
I'm going to try and re-image the phone using the stock DL17 but I'm not sure how. I've got the instructions for installing the rooted EC09 ROM but I don't think I'm supposed to use the I500.PIT? Is that specific to EC09, or is it specific to the phone model (and independent of ROM)?
UPDATE: I just realized there's a DL17 .PIT so nevermind! I'll be sure to use that.
Click to expand...
Click to collapse
If Odin fails when using the DL17 pit just try again without the pit.
abby_nitewolf said:
I had the same problem at first, but then this is what i did:
flashed ec07 odex
flashed dl17 odin image
then i just restarting the ota
If you still cant get it to work you can always flash the cwm files or odin files in the development section. But i would try ota first
Click to expand...
Click to collapse
i am having the same problem as the op
i am a kind of a noob
where can i find these to download
and
how do i go about installing them
thanks for any help
yhknq said:
i am having the same problem as the op
i am a kind of a noob
where can i find these to download
and
how do i go about installing them
thanks for any help
Click to expand...
Click to collapse
That one is not something I'm gonna try to cover in a post, if you are as inexperienced as you proclaim. If you want to come into IRC, I'll try to help ya out. That being said, googling 'ec07 stock odex' brought up the exact thread you need. It was the first hit.
I have a droid x that is rooted and has the hack so I can wirelessly tether. I used the voodoo ota root keeper to try and keep my root. When I try to install the update it fails. I also have clockworkmod recovery installed. Any suggestions?
rkshack
Rkshack said:
I have a droid x that is rooted and has the hack so I can wirelessly tether. I used the voodoo ota root keeper to try and keep my root. When I try to install the update it fails. I also have clockworkmod recovery installed. Any suggestions?
rkshack
Click to expand...
Click to collapse
If you do take it there is quite a hassle getting it back to be rootable but if you must? You will need the latest version of rsdlite the desired sbf .602 or .605 which will revert it back to stock then you can take the OTA. My guess is somewhere along the way you froze or uninstalled some of the preinstalled bloatware? Which can cause the update to fail this was my case at least I sbfed to. 602 then took 2 OTA'S to .621 unfortunatley I regreted it you may want to look around at method to freeze updater instead your rooted try a different rom or 2 before making the decision
rom question
Thepooch said:
If you do take it there is quite a hassle getting it back to be rootable but if you must? You will need the latest version of rsdlite the desired sbf .602 or .605 which will revert it back to stock then you can take the OTA. My guess is somewhere along the way you froze or uninstalled some of the preinstalled bloatware? Which can cause the update to fail this was my case at least I sbfed to. 602 then took 2 OTA'S to .621 unfortunatley I regreted it you may want to look around at method to freeze updater instead your rooted try a different rom or 2 before making the decision
Click to expand...
Click to collapse
Where are the best areas to look for info on roms. I have clorkwork rom manager but there are not any roms I recognize.
If I were to back up my rom and then use titatanium back up would I be able to restore to my current state.
rkshack
Rkshack said:
Where are the best areas to look for info on roms. I have clorkwork rom manager but there are not any roms I recognize.
If I were to back up my rom and then use titatanium back up would I be able to restore to my current state.
rkshack
Click to expand...
Click to collapse
RootzWiki is the best place to find roms.
You can make complete backups in ClockworkMod Recovery of your entire rom. I would use MyBackup Root to backup things like individual apps, data, SMS, etc.
Sent from my DROIDX using Tapatalk
update failed
Rkshack said:
I have a droid x that is rooted and has the hack so I can wirelessly tether. I used the voodoo ota root keeper to try and keep my root. When I try to install the update it fails. I also have clockworkmod recovery installed. Any suggestions?
rkshack
Click to expand...
Click to collapse
I also had the same failure, it was due to my having removed some of the bloatware. I loaded the 605 SBF file and rooted this installed al the root programs i would need along with voodoo ota and made a root backup, ran all my programs and did the update, all went ell and I was able to renew root with voodoo ota keeper. so far i have had no problems and am on the 621 update and fully rooted. Titanium backup works fine and I have been able to remove the bloatware.
Hope this helps and i am not too late.
From what every been saying, don't upgrade to 621. Just flash a custom rom right now since you are rooted and you can sbf back to 602 or 605 as needed.
I have 2 Droid X and both running CM7 and its awesome. I tried MIUI and Gummy but couldn't get into it.
4.5.621 install failure
Greetings. This looks like the right thread for this issue, but if not, please redirect me.
Some background:
DroidX
Android version 2.3.3
System version 4.5.605.MB810.en.US
currently rooted
Being a laggard, I did not accept the 621 update when first offered through OTA. My 4.5.605 DroidX was rooted and I'd read that I'd have to either unroot or "hide" root in some manner. It seemed like a bit of trouble and I had other life issues at the time.
After things cleared, I contacted VZ and they pushed the upgrade again. After "unrooting", I accepted the OTA upgrade, but each installation attempt failed after a successful download. No other diagnostics, just "the update failed". I tried this multiple times after reboots, battery removal, cache clearing and such. I then did a factory reset and tried again - still the same sequence, successful download, install now, update failed.
So I called VZ and Moto. They suggested accepting the update while attached to a solid WiFi. All the same tricks were turned as with the OTA (another factory reset, clear cache, remove/replace battery) only these attempts used the WiFi (excellent signal). Same failure.
Moto then suggested I ship in the unit and for $110 they would handle it. Right.
So I found Blur_Version.4.5.621.MB810.Verizon.en.US.zip, downloaded it to the SD card and attempted to install using the recovery mode menu. This also fails but at least offers up the message: assert failed apply_patch ("system/app/AccountAndSyncSettings, apk", "-" then some odd number letter sequences followed by "error in /tmp/sideload/package.zip status 7.
I've since rerooted just out of curiosity to see if that would still work.
All this to fix the irritating bug of the phone powering back on by itself.
Any hints or advice?
Thanks.
-Joe
Sending your device in is not necessary at all.
It seems that you have removed one of the systems stock apps. Replace any apps that you may have removed and attempt to take the update again.
Or, you can SBF back to 602 and take the OTA update to .621. Just be sure to back up everything that you need (not including app data).
Sent from my Galaxy Nexus using Tapatalk 2
missteps
Bloatware was renamed but I've been pretty careful not to delete anything... even kept a list of what was renamed and to what. All that has been rolled back but clearly something was missed. The only thing that threw me a curve was the symlink on the Madden Football app, but even that now looks pre-modified.
I take it that changes to ACLs would also glitch the update, but what about file timestamps? How pristine do these stock apps have to be?
I'll check them again since there's little to lose in doing so. If I can't find a discrepancy, the sbf to 602 will be the next step.
Ironically, the reason for embarking on the bloat removal at the outset was to cure the auto-power on bug, which is now supposedly fixed in 621.
But it's all about the learning.
Thanks again.
Help me please 2.3.3 to 2.3.4
I recently tried updating my phone....When I go to system settings and then go to About phone and then system updates.... I get this update 4.5.621.en.us. Then I click download and then when it finishes...I click install and then it shuts off and then it boots up and says " Failed to update software" Click ok... Then that's it... Someone please help me....
DETAILS of FIRMWARE and ETC..
System Version: 4.5.605.MB810.Verizon.en.us
Model number: DroidX
Android Version: 2.3.3 Gingerbread
Someone please help me with this annoying error
Legit-Reflex said:
I recently tried updating my phone....When I go to system settings and then go to About phone and then system updates.... I get this update 4.5.621.en.us. Then I click download and then when it finishes...I click install and then it shuts off and then it boots up and says " Failed to update software" Click ok... Then that's it... Someone please help me....
DETAILS of FIRMWARE and ETC..
System Version: 4.5.605.MB810.Verizon.en.us
Model number: DroidX
Android Version: 2.3.3 Gingerbread
Someone please help me with this annoying error
Click to expand...
Click to collapse
Have you tried downloading the update via wifi? Is the update appoximately 32MB? Have you tried to flash the 621 sbf?
Sent from my MB860 using xda app-developers app
palmbeach05 said:
Have you tried downloading the update via wifi? Is the update appoximately 32MB? Have you tried to flash the 621 sbf?
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
I don't know how to flash, and yes i've tried multiple times downloading the update....help
Legit-Reflex said:
I don't know how to flash, and yes i've tried multiple times downloading the update....help
Click to expand...
Click to collapse
Download RSD Lite, i think the latest revision is 5.7. then download the 621 sbf, any necessary drivers, and it also helps to have the fastboot/adb package as well (even though fastboot is useless for us, still something good to have).
backup anything you need backed up or do a nandroid. reboot to bootloader. connect device to computer. start up RSD Lite. click show device. click the button that lets you browse for files. select 621 sbf. click start. sit back and let it do its thing and you'll be back up and running in no time
Links files and instruction on how to flash a sbf, are in my list
sd_shadow's [Collection] of Links for: Droid X (MB810)
Sent from my XT862 using Tapatalk
deboyz1014 said:
From what every been saying, don't upgrade to 621. Just flash a custom rom right now since you are rooted and you can sbf back to 602 or 605 as needed.
I have 2 Droid X and both running CM7 and its awesome. I tried MIUI and Gummy but couldn't get into it.
Click to expand...
Click to collapse
621 isn't all bad. It's easy enough to root it now with an apk called Framaroot and you will then have all the latest security updates from Motorola. If you do go with 621 you are then"stuck" there as it is not possible to go back to any earlier versions. Most of the most recently updated Roms work fine with it.
Sent from my SCH-I535 using Tapatalk