I've tried all the methods in this forum but I can't unlock it, I ran Lockwiz 0.3 and it gave my a number, but when I turn on the phone it doesn't ask me for a unlock code, I've tried with two sims, one with PIN and the other without, when I put the one that has PIN code it ask me to enter it but when I do it tells me that it's a invalid sim and the screen stays at the pin code entering proccess, of course when I put cancel the phone says is "searching" all the time. When I put the other sim it doesn't ask for the unlock code either and also stays at searching all the time.
I've put the sims on other phones so I know that they're not the problem.
I had my g4 hard SPL with X2H'S WM6.5 (with Manila2D) - {Build 23001} rom, but now I removed the hard SPL so to see if this fixed the problem but it didn't...
I would be really grateful if someone could help me, I've read lots of threads but haven't found a similar problem.
Dear people,
I have read that the SIM PIN Code doesn't work on amdroit. I have installed androit and to unlock it i need to enter the pin code, is there a general code or how do i enter androit? Plz help!
the problem is solfed but now i got a new problem, how can i bood androit immediately form the beginning?
Yes, you can use the DualBoot Once installed, you'll be able to choose to run either WinMo either Android when you will boot your phone.
remoendo said:
the problem is solfed but now i got a new problem, how can i bood androit immediately form the beginning?
Click to expand...
Click to collapse
how the problem with sim is solved?
So i purchased sim unlock code online for my hd2 which is running WP7. I inserted the AT&T sim card and turned the phone on. The first thing phone requested pin, i entered it and it said that pin accepted but the phone is still locked. Every time im trying to call it asks for pin again and it says pin required. What should i do to get it working??
I have the exact same issue. Anyone? I've tried apn settings, rebooting, etc.
I fixed this! If you load android on an sd and boot it and then put in the lock code it will unlock your device. I used Copenhagen's Gingerbread. After that, boot into WP7 and it should display your carrier name. Try this Wolk and tell me what you think, and click thanks if you think I helped at all.
How did you do this? Im having trouble with only one sd-card 2gb
Hi all,
I've been in a trouble that never been before. And after several tries, lots of google, I have to ask for help
I've got a Desire HD locked to Softbank Japan (001HT) comes with v2.37.726.2 with S-ON and can NOT access to any menu except emergency call.
So I can't enable USB Debugging, can't flash to another version although I have goldcard already (Main version is older! problem).
Phone can go to recovery, fastboot can see phone, but ADB NOT.
Tried all mode recovery, hboot usb, normal mode (only emergency call) and HTC original upgrade tools can't connect to phone as well.
So, the situation is: can't enable USB Debugging, phone not allow to flash to any older version, can't ADB. ONLY HBoot usb fastboot can see phone.
Anyone have experience with this before?
Willing to donated some $$$ if can help me out.
Thank you
You cannot downgrade that build, because HTC added some new security measures. Sorry, but you are stuck before someone finds a new way to downgrade.
That's sad Any chances to flash to higher version or whatever so at least I can use the phone as a PDA?
Just to give it a bump.
Any way to by pass that emergency call only so I can use it as a PDA?
Found those:
PD98IMG_Ace_Gingerbread_S_Orange_ES_2.37.75.8_Radio_12.54.60.25_26.09.04.11_M2_release_194089_signed
and some TMO_UK TMO_AT with 2.37.11x.x
will give them a try
Update:
PD98IMG_Ace_Gingerbread_S_TMO_UK_2.37.110.5_Radio_12.54.60.25_26.09.04.11_M2_release_189654_signed
This file works. Although there is no solution to downgrade 2.37, but at least it can by pass that stupid emergency dial only and allow to input unlock code / or use it as a PDA
secany said:
Hi all,
I've been in a trouble that never been before. And after several tries, lots of google, I have to ask for help
I've got a Desire HD locked to Softbank Japan (001HT) comes with v2.37.726.2 with S-ON and can NOT access to any menu except emergency call.
So I can't enable USB Debugging, can't flash to another version although I have goldcard already (Main version is older! problem).
Phone can go to recovery, fastboot can see phone, but ADB NOT.
Tried all mode recovery, hboot usb, normal mode (only emergency call) and HTC original upgrade tools can't connect to phone as well.
So, the situation is: can't enable USB Debugging, phone not allow to flash to any older version, can't ADB. ONLY HBoot usb fastboot can see phone.
Anyone have experience with this before?
Willing to donated some $$$ if can help me out.
Thank you
Click to expand...
Click to collapse
What did you do to get into this trouble?
I was thinking of trying to downgrade my Softbank 001HT so I can root it again.. but maybe not if this is the result??
kiwiandy said:
What did you do to get into this trouble?
I was thinking of trying to downgrade my Softbank 001HT so I can root it again.. but maybe not if this is the result??
Click to expand...
Click to collapse
my phone just came back from repair with this version replacing my root. is there a fix yet?
Please give me the link
secany said:
Found those:
PD98IMG_Ace_Gingerbread_S_Orange_ES_2.37.75.8_Radio_12.54.60.25_26.09.04.11_M2_release_194089_signed
and some TMO_UK TMO_AT with 2.37.11x.x
will give them a try
Click to expand...
Click to collapse
Hello,
please give me the link for this dowload , i want to load and want to unlock
Thanks'
sathish.sa said:
Hello,
please give me the link for this dowload , i want to load and want to unlock
Thanks'
Click to expand...
Click to collapse
Do you have a SoftBank 001HT?
Settings - System - About Phone:
What build is it, Kernel etc. ?
Hello!
secany said:
I've got a Desire HD locked to Softbank Japan (001HT) comes with v2.37.726.2 with S-ON and can NOT access to any menu except emergency call.
So I can't enable USB Debugging, can't flash to another version although I have goldcard already (Main version is older! problem).
Anyone have experience with this before?
Willing to donated some $$$ if can help me out.
Click to expand...
Click to collapse
This Japanese phone need special way to enter the Airplane mode without the SIM card. I translate from a Japanese site:
1. Slide down to enter Emergency call interface.
2. Put and hold the Power button for few seconds, a dialog will appear, select Airplane mode
3. Touch the Home button
4. Now you can use the phone, change the settings, root, and unlock it
Hi,
@Tudo: Thanks for the info.
Question: I put my phone into airplane mode and was able to access a screen where I could read "Sim network subset unlock pin".
So I got an HTC unlock code from a trusted website. After I input the code, it said: "Invalid password"; and my phone still is sim-locked. Am I doing something wrong? Does "sim network subset unlock pin" mean the same as "sim unlock code"? I'm lost here...
Hope someone can advise me...;-)
Hey guys!
I purchased Y300-0151/U8833 from Virgin Canada and rooted it using TWRP 2.6.3.0 and then installed CM10 Unofficial on it.
With the stock ROM whenever I turned on the screen I got a key entry modal dialog with an entry box for unlocking and both unlock and dismiss buttons at the bottom of it.
Now, After rooting and changing the ROM, I can't find this screen and the SIM doesn't work either, meaning that now I can't remove the SIM lock and I can't use the original SIM in my country.
Do you guys have any suggestions about my issue?