I've tried all the methods in this forum but I can't unlock it, I ran Lockwiz 0.3 and it gave my a number, but when I turn on the phone it doesn't ask me for a unlock code, I've tried with two sims, one with PIN and the other without, when I put the one that has PIN code it ask me to enter it but when I do it tells me that it's a invalid sim and the screen stays at the pin code entering proccess, of course when I put cancel the phone says is "searching" all the time. When I put the other sim it doesn't ask for the unlock code either and also stays at searching all the time.
I've put the sims on other phones so I know that they're not the problem.
I had my g4 hard SPL with X2H'S WM6.5 (with Manila2D) - {Build 23001} rom, but now I removed the hard SPL so to see if this fixed the problem but it didn't...
I would be really grateful if someone could help me, I've read lots of threads but haven't found a similar problem.
Related
Is there a software or any tricks to by-pass the phone lock (password) on the T-Mobile MDA? I'm new at this, if there is a way please show me step by step. thanks in advance.
: Best Regards Babysheep :
Have you tried a hard reset or a new rom?
If you mean the simlock: search for a thread on "lokiwiz", that enables you to remove the simlock from your phone and CID unlock your phone so you can flash another ROM on it. If you are talking about the password, do a hard reset or flash a new ROM on it.
I think I'm getting the same problems as the OP. I also bought a MDA off ebay, that's still locked to T-mobile, but I dont have a T-mobile SIM card. So I can't use the "lokiwiz" program because I can't even access the OS. I also cant get my IMEI number for the same reason. So I can't buy a code online. So I'm stuck. I'm also not in the US so I can't borrow my friend's SIM to unlock it or anything like that. Would flashing the MDA to a new rom stop this? I'll appreciate any help, thanks.
kronarq said:
Have you tried a hard reset or a new rom?
Click to expand...
Click to collapse
Hi, first off, how do you do a hard reset? and I tired new rom but I am not sure if i did it right or not . I have just read the in t-mobile site to perform a hard reset but due to phone lock, i can not hit start and go into settings.. Please help! I know this is not a sim lock. The phone is asking for a 4 digit phone lock password.. any ideas?
For a hard reset you need to hold the comm-button on the upper left corner of the phone and the camera-button on the right side of the phone while it boots up. the esiest way is to do a soft reset and then hold the two buttons till you get the installation screen on your phone.
I think this thread is a bit confusing, since there are two locks being discussed in here right now.
babysheep is having troubles with the password that is set by the previous owner, that can be solved by the hard reset as said by freezor. His advice is a fine way to hard reset, the T-Mobile way has the same results, but is not possible due to the password. Use freezor's method and you should be ok.
Jugges is having simlock problems. Can you contact the seller to ask for the IMEI code? Alternatively, you can perhaps buy a T-Mobile prepaid SIM, although I am not sure that would work. Perhaps prepaid SIMs are also locked from the phone. Flashing a new ROM will NOT affect the SIMlock, so that is no option for you. Perhaps you better post your problem in the lokiwiz thread, perhaps they can help you better than we can here.
I think I should have read into Lokiwiz deeper. I didnt realize that you can still sync with your computer when there is no SIM installed. This allowed me to install the Lokiwiz cab, and unlock it. So everythings working now. Thanks for the help.
Hard Reset
I am also attempting a hard reset; the problem when I do the soft reset while holding the com and picture buttons, the screen that appears is 3 wide horizontal bands colored red, green, and blue. The only text is IPL 1.08, then a little below that is SPL 1.08. Any ideas?
I recevied my unlock code for my wizard but I have problem to enter it.
when I insert sim card for different provider i get the unlock window but it says "you have tried 8 times wait for new try". I waited serveral mintes but it's still the same.
Is there any workaround for this problem? How long must I wait to be able to enter the unlock code?
many thanks in advance
you need to do this with the sim supplied with the wizard
is it a CID unlock code or a provider unlock code
provide some more info please
provider unlock code i optained using lokiwiz.
any idea !!??
Hello,
I try to sim unlock a Wizard G4 of my friend. I already flashed the touch HD rom on it and it works, but I can't unlock the device. I already have the correct unlock code, but it loops or something. First i need to enter my pin, then i get the unlock stuff, then I put in unlock code, but then it goes back to pin again, and again. I am confused , can anyone help?
Use 'lokiwiz03a' tool again to generate a new SIM unlock code and than try again,hope it works this time
I already fixed it . The code was totally correct, but I tried to unlock it on a custom wm 6.1 rom isntead of the original rom of the telephone, so it didn't work. I downloaded the original latest rom of the phone and then put in the unlock code and voila, unlocked!
Hello
I recently bought myself Samsung SCH-I770 phone which has Windows Mobile 6.1 operation system.
My problem is that it's network/sim locked. I cannot use it with my country SIM card.
Though, there's code entering option under "Phone->Settings->Security-SIM Lock". 6 digit code and it gives the answer "Lock code and Input code do not match." after I enter the WRONG code. I think it checks the code which is written somewhere on the memory of phone.
Now - my question is. Would it be possible to BRUTE FORCE the password using that option? 6 digit code (numbers) is only 1 million possibilities - shouldn't take THAT long for a program to process.
Thank you in advance,
sitapea1337
PS: I have checked unlock softwares which are posted on this forum, but non seemed to be working.
bumpbumpbump
Most phones lock permanently after 10-30 failed attempts to unlock. Some don't, so if you have good typing skills and memory, trying all combinations will only take you a "little while".
So critical. I think follow instructions of 'stepw'
Isn't there a risk that somebody might "try" to unlock the phone and it will be locked forever? How could one unlock the phone from being locked forever?
Like PUK code for SIM card, when SIM is locked by trying to enter PIN codes too many.
So i purchased sim unlock code online for my hd2 which is running WP7. I inserted the AT&T sim card and turned the phone on. The first thing phone requested pin, i entered it and it said that pin accepted but the phone is still locked. Every time im trying to call it asks for pin again and it says pin required. What should i do to get it working??
I have the exact same issue. Anyone? I've tried apn settings, rebooting, etc.
I fixed this! If you load android on an sd and boot it and then put in the lock code it will unlock your device. I used Copenhagen's Gingerbread. After that, boot into WP7 and it should display your carrier name. Try this Wolk and tell me what you think, and click thanks if you think I helped at all.
How did you do this? Im having trouble with only one sd-card 2gb