I know the thread title says enough but I'm going to elaborate on what I am looking for.
I am looking for a looking for a lock program with password protection similar to the one that comes on our Wizards, but without the timed lock. I want it to only lock my device when it is turned back on from sleep mode and no other time. Basically I only want to have to type a password in when the screen is turned back on and not again until I turn the screen back on again.
Does anyone know of a program with this kind of functionality? I really need this because unfortunately, I still live with my parent and my Mom likes to go through my phone and look at all my personal data like call logs and SMS. It's become a nuisance and I really want to do something about it.
Thanks in advance guys.
Dan.
What's wrong with the time out one? I think if you were to do a 0 seconds of the built in password thingy, you can have it ask for a password every time you switch it on.
The built in one will only ask you password if your phone is not used for a certain period of time. the time out function is basically from the backlight and battery time out, nothing to do with the passwor.d
hanmin said:
What's wrong with the time out one? I think if you were to do a 0 seconds of the built in password thingy, you can have it ask for a password every time you switch it on.
The built in one will only ask you password if your phone is not used for a certain period of time. the time out function is basically from the backlight and battery time out, nothing to do with the passwor.d
Click to expand...
Click to collapse
Well the problem with the built in lock function is that it will lock the phone after so many seconds even if the backlight is still on and it gets annoying when I'm doing something but get sidetracked for a few seconds and then come back and have to type in the code to unlock it again, even though it never left my hand in the first place. I'll play with it a bit and see what can be done with it but from what I have seen so far, I don't really like it.
I'm pretty sure it is based on you switching off (suspend) the phone or the phone switch (suspend) off itself, because the option is "0 minutes". It can't have the phone locked after it us unused for 0 minutes.
hanmin said:
I'm pretty sure it is based on you switching off (suspend) the phone or the phone switch (suspend) off itself, because the option is "0 minutes". It can't have the phone locked after it us unused for 0 minutes.
Click to expand...
Click to collapse
Heh... It worked. Thanks. If I set the backlight and power options to never turn off display then it will never lock the device but once I press the power button to turn off the screen then it automatically locks the device so that you have to type in the password before you can resume playing around with the phone.
Thanks again. I had never tried that option before.
Dan.
Hi there,
While I watch a movie on TV via multimedia dock, my atrix keeps locking up (at least three times per movie). When it happens, I unlock the screen and resume the movie which is very annoying.
Although I set up "Screen timeout" to "Never timeout", it keeps happening. Am I missing something here???
Thanks very much for your help in advance!
Try the "screenon" widget in the market just to make sure on the timeout issue.
As for the lock screen itself, the ever popular "no lock" widget is free and gets rid of the annoying lock screen...
Sent from my MB860 using xda premium
I tried that app and it never worked. What I found is that if I change the screen lock setting to "never timeout", the screen does not get locked as long as the phone is not on multimedia dock. Does anyone have this issue?
That's a strange one. Mine never used to lock when it was on the dock.
Is your dock plugged in so your atrix is charging? If not, maybe it's some power saving mode making it shut off?
Otherwise, maybe something in the ROM you're running.
Yeah, I know. It looks like nobody has this problem. Yes, the dock is plugged in and is being charged. I found "Stay awake (Screen will never sleep while charging)" option under Developement the other day. I will check that option and see if it resolves the problem. Right now, I have to get up every 30 minutes and move the mouse around on Webtop Mode window on my TV during a movie. This is very annoying.
I have Bell's stock rom: 45.2.17.MB860.BellMobility.en.CA (2.3.4). My phone is unlcocked (on Rogers) and rooted.
in settings, you need to turn off the auto lock
darenkan said:
in settings, you need to turn off the auto lock
Click to expand...
Click to collapse
Thanks! Where do I find "auto lock" option in Settings?
janggu said:
Yeah, I know. It looks like nobody has this problem. Yes, the dock is plugged in and is being charged. I found "Stay awake (Screen will never sleep while charging)" option under Developement the other day. I will check that option and see if it resolves the problem. Right now, I have to get up every 30 minutes and move the mouse around on Webtop Mode window on my TV during a movie. This is very annoying.
I have Bell's stock rom: 45.2.17.MB860.BellMobility.en.CA (2.3.4). My phone is unlcocked (on Rogers) and rooted.
Click to expand...
Click to collapse
I tried "Stay awake" option last night and my atrix still got locked out during a movie. Very frustrating...
oops I see now lol.... bell stock.
I am ATT on CM7 sorry
janggu said:
I tried "Stay awake" option last night and my atrix still got locked out during a movie. Very frustrating...
Click to expand...
Click to collapse
I'm taking a wild guess and saying it's probably an app or something causing you grief. I've never heard of anyone else having this issue that anyone was able to replicate.
Maybe you want to look at your apps and see if you have any that might cause that kind of behaviour. Try removing them and see if it fixes your issue, if not, move on to the next app.
Or if you're really fed up, you can always try a factory reset and start from scratch.
I have the same problem on mine.
I think I found the problem. It has to do with the Security Lock and the Fingerprint scanner. Once fingerprints are entered the "Security Lock Timer" becomes disabled. Mine was set to 20 minutes. I reset it to "When display is off"
Settings->Location & Security
If "Security Lock Timer" is greyed out, you'll have to clear out your fingerprints and do the setup again.
->Change Screen Lock
Select None.
Select "Clear Stored Fingerprints"
Go back into "Change Screen Lock"
Select PIN and enter a pin.
It'll dump you back out to "Location & security"
Security lock timer should now be enabled.
Select "When display is off"
Go back into "Change screen lock" and set up your fingerprint scanner again.
See if that fixes the problem.
***EDIT*** Didn't work. Mine still engages a lock after about 20 minutes.
Setting screen lock to "None" didn't help either. Still times out in about 20 minutes (like a screensaver).
I found the solution!!!
The problem was the screen saver settings in WebTop mode. The other day, I saw a setting icon on WebTop mode and found that the screen saver was set to 30 minutes. I chaged it to 3 hours and now I can watch a movie without getting up every 30 minutes. Yeah!!!
Oh that's cool. I didn't know that.
Thanks
My nexus4 cannot automatically lock the screen anymore, The setting is that it should turn off the screen after 1 minutes, but the screen just keep on light all the time, the only way is pressing the power button manually.
The ROM version is 4.2.1. Do anyone have the some issue? How to resolve it? Thanks a lot.
Mine locks after a given time. Try rebooting and report if it changed something maybe... Or try changing the screen off time (for ex. try 15 seconds).
rabbit140 said:
Mine locks after a given time. Try rebooting and report if it changed something maybe... Or try changing the screen off time (for ex. try 15 seconds).
Click to expand...
Click to collapse
Change given time does not work , after reboot it is OK, The question is it will not lock automatically after a few time use.
Really strange....
Is your phone rooted?
rabbit140 said:
Is your phone rooted?
Click to expand...
Click to collapse
No, after deleted some apps, it works OK in the last two days. May have some relationship with the apps.
I will keep watching...
My lock screen won't stay set to a unlock method. I have changed the unlock to patternpattern, pass code, and fingerprint. After a little while it goes back to just swipe. Even though, I'll go to the setting and it'll say it's still set to whatever method I have it set to. But for whatever reason the actual lock screen goes back to swipe. Also when it does work, the fingerprint reader is hit and miss. I'll have fingerprint and password or code and then the fingerprint reader won't even recognize I'm trying to use it. Anyone else having similar issues or know of a fix?
tyoder87 said:
My lock screen won't stay set to a unlock method. I have changed the unlock to patternpattern, pass code, and fingerprint. After a little while it goes back to just swipe. Even though, I'll go to the setting and it'll say it's still set to whatever method I have it set to. But for whatever reason the actual lock screen goes back to swipe. Also when it does work, the fingerprint reader is hit and miss. I'll have fingerprint and password or code and then the fingerprint reader won't even recognize I'm trying to use it. Anyone else having similar issues or know of a fix?
Click to expand...
Click to collapse
It actually is staying what you set it at.
Samsung as usual has set up some stupid defaults for this phone.
Go here and set it to Instantly and it will work as you expect.
Settings > Quick Settings > Lock screen and security > Secure lock settings > Secure lock time > Instantly with the power key or when the screen times out
With those settings every time you unlock your phone you will need whatever security you set.
With the default settings Samsung has it so your phone will only lock if you do not touch the phone for 10 minutes..... real secure there Samsung...
As for the fingerprint reader, when you set it up hold the phone like you would be unlocking it and use every part of the finger during the setup process.
I added both thumbs and index fingers using the tip, flats, and sides of each during the setup process.
If for some reason it does not want to read still, you can set up the same finger multiple times, do one as just the flat, one as the sides, one as the tip.
Milimbar said:
It actually is staying what you set it at.
Samsung as usual has set up some stupid defaults for this phone.
Go here and set it to Instantly and it will work as you expect.
Settings > Quick Settings > Lock screen and security > Secure lock settings > Secure lock time > Instantly with the power key or when the screen times out
With those settings every time you unlock your phone you will need whatever security you set.
With the default settings Samsung has it so your phone will only lock if you do not touch the phone for 10 minutes..... real secure there Samsung...
As for the fingerprint reader, when you set it up hold the phone like you would be unlocking it and use every part of the finger during the setup process.
I added both thumbs and index fingers using the tip, flats, and sides of each during the setup process.
If for some reason it does not want to read still, you can set up the same finger multiple times, do one as just the flat, one as the sides, one as the tip.
Click to expand...
Click to collapse
That's exactly how everything is set up on my device though. I have it set to lock immediately and did all angles of my fingers. Still won't keep the lock screen set and won't read the fingerprints. It doesn't give me a does not match message or anything. At least when that happens, I know it's trying to read my finger.
tyoder87 said:
That's exactly how everything is set up on my device though. I have it set to lock immediately and did all angles of my fingers. Still won't keep the lock screen set and won't read the fingerprints. It doesn't give me a does not match message or anything. At least when that happens, I know it's trying to read my finger.
Click to expand...
Click to collapse
In that case I do not know.
You could try a factory reset, but I do not know if that will help.
If mine did that I would be returning it for a replacement.
Also make sure settings/lock screen/secure lock/smart lock isn't set to anything that's trusted.
Smart lock leaves the phone in swipe unlock if it recognizes your phone is at your home..or hook up to your Bluetooth, etc.
tyoder87 said:
That's exactly how everything is set up on my device though. I have it set to lock immediately and did all angles of my fingers. Still won't keep the lock screen set and won't read the fingerprints. It doesn't give me a does not match message or anything. At least when that happens, I know it's trying to read my finger.
Click to expand...
Click to collapse
So after digging around some more, I found out what was happening. I have a Moto 360 paired to my phone. I had it as a trusted device and that's what was allowing me to do swipe while still having the lock screen set to something else. However, my fingerprint reader is still acting up. It's still not even trying to read my fingerprints.
tyoder87 said:
My lock screen won't stay set to a unlock method. I have changed the unlock to patternpattern, pass code, and fingerprint. After a little while it goes back to just swipe. Even though, I'll go to the setting and it'll say it's still set to whatever method I have it set to. But for whatever reason the actual lock screen goes back to swipe. Also when it does work, the fingerprint reader is hit and miss. I'll have fingerprint and password or code and then the fingerprint reader won't even recognize I'm trying to use it. Anyone else having similar issues or know of a fix?
Click to expand...
Click to collapse
Go to settings and search smart lock... It shows that if you ate home the screen stays unlock but if u leave anywhere it'll lock..you can turn the location off when. You get into smart lock
The same thing is happening with mine (SM-G935A AT&T). However, when I go to the secure lock settings, it keeps changing from lock instantly to the maximum setting (which shows as 34 minutes and 7 seconds). Smart Lock has been completely disabled by system administrator (I get my corporate email on my phone). Every time I go in and change the secure lock to instant, it reverts back within the next 30 minutes.
[email protected] said:
The same thing is happening with mine (SM-G935A AT&T). However, when I go to the secure lock settings, it keeps changing from lock instantly to the maximum setting (which shows as 34 minutes and 7 seconds). Smart Lock has been completely disabled by system administrator (I get my corporate email on my phone). Every time I go in and change the secure lock to instant, it reverts back within the next 30 minutes.
Click to expand...
Click to collapse
Mine is doing the same thing automatically changes to 34 min and 7 seconds secured lock time without me changing it from instantly w power key so frustrating
[email protected] said:
Mine is doing the same thing automatically changes to 34 min and 7 seconds secured lock time without me changing it from instantly w power key so frustrating
Click to expand...
Click to collapse
If you don't mind me asking, what device administrators do you have setup? Currently I have my company exchange policy, Lookout Mobile, AT&T Protect Plus and Android as registered administrators. I'm starting to wonder if its the combination of services like maybe the Protect Plus and Lookout.
[email protected] said:
If you don't mind me asking, what device administrators do you have setup? Currently I have my company exchange policy, Lookout Mobile, AT&T Protect Plus and Android as registered administrators. I'm starting to wonder if its the combination of services like maybe the Protect Plus and Lookout.
Click to expand...
Click to collapse
Hi! Lookout, email and Android device manager are all administrators I think in personal settings
[email protected] said:
Hi! Lookout, email and Android device manager are all administrators I think in personal settings
Click to expand...
Click to collapse
I figured out the issue, at least for me. First I tried to disable both Lookout and ATT Protect Plus as device administrators but still the lock setting would revert to 34 minutes and 7 seconds. In my account settings for my corporate email, there was a link for all security policies. Sure enough, the screen lock policy showed as 2047 seconds which translates to 34 minutes and 7 seconds. I cannot change the option as that is the corporate policy set by the server.
This is an issue with Samsung s7 including the edge. Mine was playing up from the day I got it. I took it into carphone warehouse assuming it was a setting and the guy serving me basically said to send it back. I eventually got a refund from Samsung (it was painful) and then I stupidly bought another one of these overpriced, over hyped pieces of **** from John Lewis instead. I've always used windows (mobile (i.e. what I'd call old android and what XDA was made for) and then windows phone and briefly windows 10 mobile. From my short experience of using the so called best android phone I have to say gimmicks aside, the features both phones share, windows destroys android, emails, documents, ease of use, fluidity, user experience....oh and a working lock screen. Not happy and it's my own fault, I fell for mass marketing and believing the hype.
I think I found the answer
tyoder87 said:
My lock screen won't stay set to a unlock method. I have changed the unlock to patternpattern, pass code, and fingerprint. After a little while it goes back to just swipe. Even though, I'll go to the setting and it'll say it's still set to whatever method I have it set to. But for whatever reason the actual lock screen goes back to swipe. Also when it does work, the fingerprint reader is hit and miss. I'll have fingerprint and password or code and then the fingerprint reader won't even recognize I'm trying to use it. Anyone else having similar issues or know of a fix?
Click to expand...
Click to collapse
If you have a device like a Bluetooth paired with your s7 edge, make sure that smart lock isn't on. Once I changed that that setting, it stays locked.
Can you describe how to find this page (that showed 2047 seconds)? I want to see if my company IT will change this.
Hi I have s7 edge, here's the problem is I cannot touch the screen, already do hard reset and rebooting still the screen cannot touch. I could not unlock my s7 edge.
Thanks for the help
Originally Posted by Milimbar It actually is staying what you set it at. Samsung as usual has set up some stupid defaults for this phone. Go here and set it to Instantly and it will work as you expect. Settings > Quick Settings > Lock screen and security > Secure lock settings > Secure lock time > Instantly with the power key or when the screen times out With those settings every time you unlock your phone you will need whatever security you set. With the default settings Samsung has it so your phone will only lock if you do not touch the phone for 10 minutes..... real secure there Samsung... As for the fingerprint reader, when you set it up hold the phone like you would be unlocking it and use every part of the finger during the setup process. I added both thumbs and index fingers using the tip, flats, and sides of each during the setup process. If for some reason it does not want to read still, you can set up the same finger multiple times, do one as just the flat, one as the sides, one as the tip.
From:shawnthall15
Thank you for the tip it really helped me fix the lock on my new samsung galaxy amp prime!!!!
Restart your phone
tyoder87 said:
My lock screen won't stay set to a unlock method. I have changed the unlock to patternpattern, pass code, and fingerprint. After a little while it goes back to just swipe. Even though, I'll go to the setting and it'll say it's still set to whatever method I have it set to. But for whatever reason the actual lock screen goes back to swipe. Also when it does work, the fingerprint reader is hit and miss. I'll have fingerprint and password or code and then the fingerprint reader won't even recognize I'm trying to use it. Anyone else having similar issues or know of a fix?
Click to expand...
Click to collapse
I made sure i made my password effective immediately (it was set to 5 seconds) after you lock your phone and it didn't work.
Then I realized that I didn't restart my phone yet.
Lock screen was effective immediately after I restarted my phone. Solved my case!
Fixed
Its quite simple, it is smart as samsung has made s7/edge to recognize you and let your phone stay unlock whenever it is around you. Once, it has been unclocked by you, you dont have to set in the passcode each time to look at your phone. But dont worry, it will revert back to lock mode once it noticed that you'v set it aside on a surface i.e leaving it. Should you want to make your phone locked at all time whenever you want it, simply change the setting as follows: Setting > Lock screen and security > Secure lock settings > Smart lock > (enter your pin) > On-body detection > set it to off. Whallaaa!! Problem solved.
---------- Post added at 06:01 AM ---------- Previous post was at 05:55 AM ----------
tyoder87 said:
My lock screen won't stay set to a unlock method. I have changed the unlock to patternpattern, pass code, and fingerprint. After a little while it goes back to just swipe. Even though, I'll go to the setting and it'll say it's still set to whatever method I have it set to. But for whatever reason the actual lock screen goes back to swipe. Also when it does work, the fingerprint reader is hit and miss. I'll have fingerprint and password or code and then the fingerprint reader won't even recognize I'm trying to use it. Anyone else having similar issues or know of a fix?
Click to expand...
Click to collapse
Its quite simple, it is smart as samsung has made s7/edge to recognize you and let your phone stay unlock whenever it is around you. Once, it has been unclocked by you, you dont have to set in the passcode each time. But dont worry, it will revert back to lock mode once it noticed that you'v set it aside on a surface i.e leaving it. Should you want to make your phone locked at all time whenever you want it, simply change the setting as follows: Setting > Lock screen and security > Secure lock settings > Smart lock > (enter your pin) > On-body detection > set it to off. Whallaaa!! Problem solved.
Go to settings/lock screen and security/other security settings/trust agents and turn off Google Smart lock option.
You are back to instant phone lock.
Cheers🖒
After 7.1.1 update, Axon 7 requires PIN after reboot and unlocking phone. Is it possible to turn this function off, to unlock with fingerprint every time?
thanks for answers
BurakSefaSenturk said:
After 7.1.1 update, Axon 7 requires PIN after reboot and unlocking phone. Is it possible to turn this function off, to unlock with fingerprint every time?
thanks for answers
Click to expand...
Click to collapse
I don't think that can be turned off. It's a 'security feature'.
But if there is a way to firm that off, I'd like to know as well.
There is a way. Here's screen shots.
Go to security, screen lock, pattern or pin (whatever you're using) it'll ask for you pin or pattern, then select no thanks
tolymatev said:
There is a way. Here's screen shots.
Go to security, screen lock, pattern or pin (whatever you're using) it'll ask for you pin or pattern, then select no thanks
Click to expand...
Click to collapse
That's not the same thing...even if you select no thanks, you will still have to enter your pin on reboot. It was the same on the Nexus 6P. I have always selected no thanks and have always had to enter a pin on reboot. I believe it's a Nougat feature that can't be disabled.
Hola
If you use a third party ROM like Resurrection Remix, the feature you are looking for is available. I actually have it configured like this on my phone.
"So what you want me to do 'bout that?"
Howie Dub said:
That's not the same thing...even if you select no thanks, you will still have to enter your pin on reboot. It was the same on the Nexus 6P. I have always selected no thanks and have always had to enter a pin on reboot. I believe it's a Nougat feature that can't be disabled.
Click to expand...
Click to collapse
Oh now i see what you're talking about. If you select yes Android won't even start without a pin or pattern. If you select no Android will start but will require pattern or pin for 1st unlock.
Sorry for misleading you guys.