Database Users

[HELP] Cannot get SD Android running on my HD2

HD2 T9193 Australia
512Kb Flash Memory
SPL-2.08.HSPL CotullaHSPL
ROM Energy Leo 29007 Sense 2.5 Jan 24
Radio 2.15.50.14
Over last few days, have download several SD builds of Android.
I Copy the android folder to root of SD card
I start the phone in Windows Mobile
I run CLRCAD
I run HARET
I get the grey window about starting/booting (cant remember exact, head spinning)
then get black screen with small writing
then get HTC splash screen and thats it.
each build I have tried, have left at boot screen from 60 to 90 minutes.
Now, 6 months ago with earlier version of Energy ROM, and different radio, I could load earlier version of SD Android.
Today I had a friend around, with an older radio and the same earlier version of energy rom that I used to have, and still no go on his.
What is happening (or not).
Do I need to have an EXT2/2/4 partition on my SD Card?
Something more simple??
Ideally, I wanted to try a Desire HD Sense ROM.
Have tried
CopesHD2GingCyan7Release1
Core_Droid_HD_V0.4_Release_Version
mattcleofroyo1.8
MDJ_FroYo_HD_v._4.6_MDJ_S78.0
NexusHD2-FRG83D_V1.8_(Froyo 2.2.1)
SuperRAM_FroYo_V1.5

Moby58 said:
HD2 T9193 Australia
512Kb Flash Memory
SPL-2.08.HSPL CotullaHSPL
ROM Energy Leo 29007 Sense 2.5 Jan 24
Radio 2.15.50.14
Over last few days, have download several SD builds of Android.
I Copy the android folder to root of SD card
I start the phone in Windows Mobile
I run CLRCAD
I run HARET
I get the grey window about starting/booting (cant remember exact, head spinning)
then get black screen with small writing
then get HTC splash screen and thats it.
each build I have tried, have left at boot screen from 60 to 90 minutes.
Now, 6 months ago with earlier version of Energy ROM, and different radio, I could load earlier version of SD Android.
Today I had a friend around, with an older radio and the same earlier version of energy rom that I used to have, and still no go on his.
What is happening (or not).
Do I need to have an EXT2/2/4 partition on my SD Card?
Something more simple??
Ideally, I wanted to try a Desire HD Sense ROM.
Have tried
CopesHD2GingCyan7Release1
Core_Droid_HD_V0.4_Release_Version
mattcleofroyo1.8
MDJ_FroYo_HD_v._4.6_MDJ_S78.0
NexusHD2-FRG83D_V1.8_(Froyo 2.2.1)
SuperRAM_FroYo_V1.5
Click to expand...
Click to collapse
Have you tried putting a blank data.img file on the sd card before the boot?
If not try that, they are usually available from the first post in the builds thread.
A few I tried wouldn't boot the first time unless I put that file in there.
I'm guessing it won't help, because some (if not all) of those builds can create a blank one for you, but it won't hurt to try.
This is the one from MDJ's 4.6 build you have tried. The link is from his thread. Extract the file using 7zip and stick it in the android folder.
http://www.multiupload.com/BJ2FXF9IRM

There's no need for partitioning or any kind of fancy stuff for running a simple WinMo6.5/Android dualboot. I suppose formatting your SD card (do it in WinMo, seems to be more effective) should solve your problems.
@MattOG: The data.img helps shortening the first boot time, I've never heard it actually fixes problems?

MattOG said:
Have you tried putting a blank data.img file on the sd card before the boot?
If not try that, they are usually available from the first post in the builds thread.
A few I tried wouldn't boot the first time unless I put that file in there.
I'm guessing it won't help, because some (if not all) of those builds can create a blank one for you, but it won't hurt to try.
This is the one from MDJ's 4.6 build you have tried. The link is from his thread. Extract the file using 7zip and stick it in the android folder.
http://www.multiupload.com/BJ2FXF9IRM
Click to expand...
Click to collapse
Thanks, tried the blank data.img, both the 512Mb and 1Gig.... no go

MattOG said:
Have you tried putting a blank data.img file on the sd card before the boot?
If not try that, they are usually available from the first post in the builds thread.
A few I tried wouldn't boot the first time unless I put that file in there.
I'm guessing it won't help, because some (if not all) of those builds can create a blank one for you, but it won't hurt to try.
This is the one from MDJ's 4.6 build you have tried. The link is from his thread. Extract the file using 7zip and stick it in the android folder.
http://www.multiupload.com/BJ2FXF9IRM
Click to expand...
Click to collapse
Why
do
you
write
like
this?

You do have enough free space on your card for it to create the data.img right??

conantroutman said:
You do have enough free space on your card for it to create the data.img right??
Click to expand...
Click to collapse
Hope so, 8gig card with just the android folder

ok thats not it then........
The only thing I can think to suggest is to try a different WM ROM... see if you can find the energy rom you used before from the energy archives....

It's my thought process. Did I offend your eyes?
Sent from my HD2 NANDroid using XDA App

conantroutman said:
ok thats not it then........
The only thing I can think to suggest is to try a different WM ROM... see if you can find the energy rom you used before from the energy archives....
Click to expand...
Click to collapse
Tried that with the mate's HD2, as it has the same, older energy rom that I used before

[Q] When dual booting WP7 and Android..

The WP7 boots without a hitch, but when i go to boot android via magldr sd, it freezes up? Any insight would be appreciated. Thanks XDA

trkwch said:
The WP7 boots without a hitch, but when i go to boot android via magldr sd, it freezes up? Any insight would be appreciated. Thanks XDA
Click to expand...
Click to collapse
are you using a rom that supports magldr?

great question, i havent flashed a custom rom yet, is this my issue?
Another note, when it boots to android there is activity for a split second in the tool bar and it says that the sd card is near full. i dont know if this means anything.

trkwch said:
great question, i havent flashed a custom rom yet, is this my issue?
Another note, when it boots to android there is activity for a split second in the tool bar and it says that the sd card is near full. i dont know if this means anything.
Click to expand...
Click to collapse
You dont flash the android rom, you copy it onto your sd card. Providing you have a MAGLDR SD android ROM it will install.
Have you setup your sd card to support dual boot?

I understand. Ive gone through numerous tutorials and have set up my sd card. when booting into wp7 i have 7 gigs and when i mount the sd in my laptop i have the other have remaining on my sd.
i suppose its the magldr sd android rom thats the issue
any insight here?
do i need to do this?
http://forum.xda-developers.com/showthread.php?t=913964

trkwch said:
I understand. Ive gone through numerous tutorials and have set up my sd card. when booting into wp7 i have 7 gigs and when i mount the sd in my laptop i have the other have remaining on my sd.
i suppose its the magldr sd android rom thats the issue
any insight here?
do i need to do this?
http://forum.xda-developers.com/showthread.php?t=913964
Click to expand...
Click to collapse
Yes, either that, or just use a compatible one, for example, i'm using markinux's super clean desire hd without sense blablabla x)
You could try that one out, i'm having no issues at all

trkwch said:
I understand. Ive gone through numerous tutorials and have set up my sd card. when booting into wp7 i have 7 gigs and when i mount the sd in my laptop i have the other have remaining on my sd.
i suppose its the magldr sd android rom thats the issue
any insight here?
do i need to do this?
http://forum.xda-developers.com/showthread.php?t=913964
Click to expand...
Click to collapse
ok good - sounds like you're nearly there. Make sure your Android partition is set as PRIMARY
- yes that link is where you need to look next - i never bothered with that though.
I searched the sd ROMS that supported MAGLDR. They usually had special instructions to make them work.
otherwise search thru that thread.
Zarathustrax has created quite a few pre-made MAGLDR boot files - search for his posts in that thread.

alright ill try that one
ive gone toe to toe with FEB 04 Copes
it boots to the starting htc screen and hangs there.

trkwch said:
alright ill try that one
ive gone toe to toe with FEB 04 Copes
it boots to the starting htc screen and hangs there.
Click to expand...
Click to collapse
thats the one i'm running - you did copy and replace the files in the MAGLDR dir into the root ???

indeed i did

trkwch said:
indeed i did
Click to expand...
Click to collapse
it took a good 10minutes of "HTC" hang time before it booted for me first time.
He's releasing a new version in a couple of hours which i'm going to try.

wasnt sure if my radio was the problem so im flashing the one you have in your sig
will report
thanks guys for your support

im running Copes too,
make sure on the fat32 side of your partition that its primary (like Canterbury said) and sometimes ive noticed its fussy in wanting a formatted clean card. yeah takes like 5 or 10 mins for the first boot. youll almost give up waiting lol i know i have plenty of times.

20 minutes in and still on the htc screen..

trkwch said:
20 minutes in and still on the htc screen..
Click to expand...
Click to collapse
nakay take it out reformat the fat32 side and then download and try Cope's rom from the 30th of Jan. its the one im using at the moment cause it works with the most apps and games. (has terrible battery though).
(he has a new one out soon)

trkwch said:
20 minutes in and still on the htc screen..
Click to expand...
Click to collapse
if you interrupted the first install while it was trying to create the data.img it wont boot no matter how many times you try. If you think that might be the case - delete the data.img file on the sd and try again.

Canterbury said:
if you interrupted the first install while it was trying to create the data.img it wont boot no matter how many times you try. If you think that might be the case - delete the data.img file on the sd and try again.
Click to expand...
Click to collapse
good point, giving it a go
I will also try reformatting the fat 32
will confirm
thanks guys

trkwch said:
good point, giving it a go
I will also try reformatting the fat 32
will confirm
thanks guys
Click to expand...
Click to collapse
dont worry youll get there i still get issues with roms not loading up the first time and its a pain having to reload a 16 gig card

after a few more hours of war with the hd2 still no luck lol terrible

trkwch said:
after a few more hours of war with the hd2 still no luck lol terrible
Click to expand...
Click to collapse
bugga
i'm starting again as i've just flashed XBmod 1.03 wp7, so had to start from scratch as well. Formatted the sd with ext3 and linux partitions for Android
d/ling the latest rom from cope's/warren (TMOUS ver) now.

[Q] SD Android Not Installing :(

Okay I have everything right here for the SD Android installation
ROM 3.14
2.15 Radio
HSPL 2.08
A properly fat32 formatted SD card
But no matter which SD build I try after hitting the Haret, it takes me to several lines and then to a htc screen and stays there forever.. Tried the Americandroid MccM BoxMax and the mixtheme build...
And Im sorry if this has been questioned in the earlier forums but I couldn't really see someone else having this problem, so sorry :/
But please Help
ty

cookymonster1 said:
Okay I have everything right here for the SD Android installation
ROM 3.14
2.15 Radio
HSPL 2.08
A properly fat32 formatted SD card
But no matter which SD build I try after hitting the Haret, it takes me to several lines and then to a htc screen and stays there forever.. Tried the Americandroid MccM BoxMax and the mixtheme build...
And Im sorry if this has been questioned in the earlier forums but I couldn't really see someone else having this problem, so sorry :/
But please Help
ty
Click to expand...
Click to collapse
Are you putting the Android folder in the root of the sd card? How much time are you Waiting ..first boot should take 5 or 6 minutes at least ..try another sd card too ..
Sent from my HTC HD2 using XDA App

did u run the clrcad.exe?

yugoport said:
Are you putting the Android folder in the root of the sd card? How much time are you Waiting ..first boot should take 5 or 6 minutes at least ..try another sd card too ..
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
by root of SD you mean; after formatting i just place it in the storage card directory right ? yes im doing that and i have a standard 4gb SD card

chalienge said:
did u run the clrcad.exe?
Click to expand...
Click to collapse
Yes Sir I am running the clrcad.exe first and then The Haret file plus Im waiting almost 2hours each time =/

format sd
put the folder 'Android'- not only its content but the folder itself to sd
clrcad
haret.
if it doesnt boot then hard reset phone and then do all the steps above again

Also,, regular hd2 or tmous? (I ask because 3.14 rom and 2.08.hspl on a regular don't mix, messes with the ram).
Also, for SD android the hspl and radio rules don't matter in the way they do for nand android.
As an aside, I only once got any haret based rom to load in a dozen or so attempts, and it immediately prevented the winmo rom from starting, forcing a hard reset.

mutil said:
format sd
put the folder 'Android'- not only its content but the folder itself to sd
clrcad
haret.
if it doesnt boot then hard reset phone and then do all the steps above again
Click to expand...
Click to collapse
samsamuel said:
Also,, regular hd2 or tmous? (I ask because 3.14 rom and 2.08.hspl on a regular don't mix, messes with the ram).
Also, for SD android the hspl and radio rules don't matter in the way they do for nand android.
As an aside, I only once got any haret based rom to load in a dozen or so attempts, and it immediately prevented the winmo rom from starting, forcing a hard reset.
Click to expand...
Click to collapse
Regular, not the tmous... So it is indeed not rare for the haret based rom not to load up in the first or even second attempt ? And will a hard reset really help ? I'll try hard resetting and then repeating the process

samsamuel said:
Also,, regular hd2 or tmous? (I ask because 3.14 rom and 2.08.hspl on a regular don't mix, messes with the ram).
Also, for SD android the hspl and radio rules don't matter in the way they do for nand android.
As an aside, I only once got any haret based rom to load in a dozen or so attempts, and it immediately prevented the winmo rom from starting, forcing a hard reset.
Click to expand...
Click to collapse
Not to cause confusion, but I've found this to be completely untrue. I was running a 3.14 ROM with HSPL 2.08 and Haret for ages, before deciding to give up on WinMo altogether and go to NAND. Everything worked fine.
@OP, have you tried different SD cards?

hey it worked... A simple change of a sd card worked... Tried two others, worked with the third one
thanks all you guys

Can a 3.14 stock TMOUS with 2.15 radio have a dual boot nand android?

No, if winmo is installed nothing else can be on the nand

Then, if I want to dual boot an android SD types are my only choice? I read a thread here stating that NAND is "hands down" better than SD types. If so, then could I still play games in an android SD build as fast as I could in a NAND build?
I recently bumped into this new android version rom
http://hd2apps.blogspot.com/2011/04/htc-hd2-apps-android-cm7-233.html
Like what I've said earlier, my TMOUS is a stock ver. 3.14 with radio ver. 2.15. The post in that blog says that that rom will work on a 2.08 or higher radio, but it stated that 2.12 is recommended, and and hspl 4.
Can I just install the hspl and leave the radio as is?

Bumping thread ^_^
In the Americandroid thread there's a video tut for installing and making the americandroid rom work. At the end of the video the specs of the phone used were posted, it was a 3.14 with a 2.15 radio so that answers my question, but now I have another. The video didn't make it clear whether the 3.14 rom he used was a stock or not, so my question is, can I have an SD android rom on a stock TMOUS winmo rom? Or do I really have to flash a cooked rom?

stock winmo rom is fine

Wow, thanks for the reply. I've been waiting for one in ages ^_^
Well, I tried. Funny thing though... first of, my sim was recognized but I can't seem to see any of my contacts. When I go to "my contacts" it says that I have to import it through accounts or something, but I can't find it anywhere. It says that I have to go to some menu and click on account and import.
Another thing is, when I restarted my phone to use winmo again, most of the programs I installed didn't work anymore like dutty's task manager and the resco file manager to name a few.
Any thoughts on this? I was thinking it was because of the stock rom I have. BTW, I don't have HSPL from what I remember. Just SPL.

Mate you better flash HSPL right now as it will save you from future headaches

yea hspl will save you from plenty of issues down the road

Thanks for the reps guys. I'll post the outcome of this.. thanks again ^_^
Oh, one more question. Does this apply to all SD android roms, or just the one I posted?

Ok, here's the outcome. I tried installing HSPL 2.08 as per instructions of almost all of the sd android rom builds I've seen. Please correct me if I'm wrong.
After installing HSPL 2.08, I noticed a big difference in my winmo. I hardly get any bars in my signal bar, hence, I can't text, I can't call and can't be contacted.
So I went back and installed SPL 3.03.
BTW, I have an unlocked TMOUS with stock 3.14 rom and radio 2.15, and now have SPL 3.03.
I would like to keep my stock 3.14 rom (or, if a cooked rom is needed I would like a closest to stock 3.14 cooked rom) and run an SD android rom. How do I do that? Is there an SD android rom out there that fits my needs?
Thanks for the help again.

[Q] urgent help please regarding dual boot

hi i m using android ics 4 in nand and i want to dual boot with windows 7.5 and i dont want to hard format hd2 plzz someone help is it possible or i have to start with scratch ? coz i had not installed android myself so m bit scared

since WP7 is working from NAND, You have to reflash NAND with WP7, then You can add SD android BUILD

but i have android in nand so does that means i had to flash w7 directly without hard format android or first i have to installed wp6.5 than i had to flash hspl then magldr then windows 7 then android in sd ? and if this r the only steps then my question is is there a way to skip the step of installing wp 6.5 then hspl then mgldr coz i m using android in nand so i have hspl and mgldr already installed

you wont need to reinstal HSPL, but it is adviced to install wm 6.5 prior to flashing WP7, then magldr... and so on
I did once direct flash from nandroid to WP7 and it worked, but im not sure dose it have any side effects or not

krashekspres said:
you wont need to reinstal HSPL, but it is adviced to install wm 6.5 prior to flashing WP7, then magldr... and so on
I did once direct flash from nandroid to WP7 and it worked, but im not sure dose it have any side effects or not
Click to expand...
Click to collapse
hmm seems u r wrong or missed something out so if i dont reinstall hspl then how can i run android from sd does it work on wp 6.5 hspl plzzz some advance user help its getting confusing

reflashing wm6.5 doesent remove HSPL (at least it didnt in my case)

k then too i will wait for more reply coz i had read somewhere that you can only delete hspl 2.08 or so by flashing wp 6.5 may be m wrong but still i prefer waiting

ok, remembered now, I installed custom wm6.5 ROM that uses HSPL for flashing, that is why HSPL stayed untouched

Hspl is not touched by flashing anything..it is removed only by uninstalling using hspl to flash spl again. hspl makes your phone practically unbrickable.. For wp7 you need hspl 2.08... Flash wm 6.5 with radio 2.12 or 2. 15, then magldr1. 13 and then flash wp7.. Then dual boot with android
Sent from my HTC HD2 with WP7.5/android miui using tapatalk

pakure said:
Hspl is not touched by flashing anything..it is removed only by uninstalling using hspl to flash spl again. hspl makes your phone practically unbrickable.. For wp7 you need hspl 2.08... Flash wm 6.5 with radio 2.12 or 2. 15, then magldr1. 13 and then flash wp7.. Then dual boot with android
Sent from my HTC HD2 with WP7.5/android miui using tapatalk
Click to expand...
Click to collapse
for dualboot must repartition sd card...

Simply use yukixbmod rom, and send partition cab and sd unlock cab... easier and better than old way of partitioning in other roms.. Time consuming
Sent from my HTC HD2 with WP7.5/android miui using tapatalk

pakure said:
Simply use yukixbmod rom, and send partition cab and sd unlock cab... easier and better than old way of partitioning in other roms.. Time consuming
Click to expand...
Click to collapse
not agree with you... for dualbooting, better is ROM's is which not lock card (Pdaimatejam, HD2O or CTRLPDA FSM HD2)

dxdy said:
for dualboot must repartition sd card...
Click to expand...
Click to collapse
i'm following this guide but at the end after i have loaded the sd rom onto SD card and done the boot to SD i get a SD file not found or something like that.
do you have to edit anything after you transfer the android folder to the SD card?

dxdy said:
not agree with you... for dualbooting, better is ROM's is which not lock card (Pdaimatejam, HD2O or CTRLPDA FSM HD2)
Click to expand...
Click to collapse
I only said that because partitioning of sd, using easus manager is time consuming.
Sent from my HTC HD2 with WP7.5/android miui using tapatalk

latetogameHD2owner said:
i'm following this guide but at the end after i have loaded the sd rom onto SD card and done the boot to SD i get a SD file not found or something like that.
do you have to edit anything after you transfer the android folder to the SD card?
Click to expand...
Click to collapse
no...all video is recorded without pause, only cut time where waiting time to flash WP7, copy time when copy paste ICS folder to SD and first loading time for Android.... nothing changed, edited or worked... all job is recorded...

you need to make the appropriate settings in magldr for android
services/ boot settings/ ad sd dir (android sd directory)---select your android folder , accept by pressing green call button
you will need to change boot settings also to "always show menu"
boot into android

i got my issue resolved, i wasn't swapping in the edited rootfs file and startup.txt.
it's what this video shows near the end.
perhaps it's not needed with the SD rom that you are using in that video. I tried but it didn't work for me.
thank you for doing that video. i watched that video before i even bought the hd2 and it's one of the reasons i did.
this device is amazing
---------- Post added at 10:45 PM ---------- Previous post was at 10:44 PM ----------
opps here is the link youtube.com/watch?v=xTMry4NEPTE&feature=relmfu

toocool4all said:
hi i m using android ics 4 in nand and i want to dual boot with windows 7.5 and i dont want to hard format hd2 plzz someone help is it possible or i have to start with scratch ? coz i had not installed android myself so m bit scared
Click to expand...
Click to collapse
Lol how noob was I in days before
Sent from my Nexus 5 using CHAOS kernel and SENSONIC ROM . Thank God I mean audio god.

[Q] Android A2SD question

hello,i have a t-mobile HD2 that cannot boot any android rom(SD or NAND)so my guess is that my bad blocks don't let my phone boot Android...so here is my question:with A2SD I install the rom to the SD card(which is virtually converted to NAND or something?) or not??if someone finds any solution about my problem i would be grateful

tsagas said:
hello,i have a t-mobile HD2 that cannot boot any android rom(SD or NAND)so my guess is that my bad blocks don't let my phone boot Android...so here is my question:with A2SD I install the rom to the SD card(which is virtually converted to NAND or something?) or not??if someone finds any solution about my problem i would be grateful
Click to expand...
Click to collapse
I don't have any clue what your actual question is supposed to mean, but if you can't install SD Android then it isn't anything to do with bad blocks. You need to give more information, such as which type of HD2 you have, what radio it has, do you have HSPL, what steps you've taken so far etc. Nobody can help without sufficient information.
Sent from my NexusHD2 using XDA

Nigeldg said:
I don't have any clue what your actual question is supposed to mean, but if you can't install SD Android then it isn't anything to do with bad blocks. You need to give more information, such as which type of HD2 you have, what radio it has, do you have HSPL, what steps you've taken so far etc. Nobody can help without sufficient information.
Sent from my NexusHD2 using XDA
Click to expand...
Click to collapse
I have HSPL,my HD2 is a t-mobile my radio is 2.15.50,14 and i follow each and every step the guides i found in this foroum provide...whenever is NAND or SD version

tsagas said:
hello,i have a t-mobile HD2 that cannot boot any android rom(SD or NAND)so my guess is that my bad blocks don't let my phone boot Android...so here is my question:with A2SD I install the rom to the SD card(which is virtually converted to NAND or something?) or not??if someone finds any solution about my problem i would be grateful
Click to expand...
Click to collapse
Do u have HSPL 2.08?

adil1508 said:
Do u have HSPL 2.08?
Click to expand...
Click to collapse
yes i do

tsagas said:
hello,i have a t-mobile HD2 that cannot boot any android rom(SD or NAND)so my guess is that my bad blocks don't let my phone boot Android...so here is my question:with A2SD I install the rom to the SD card(which is virtually converted to NAND or something?) or not??if someone finds any solution about my problem i would be grateful
Click to expand...
Click to collapse
I still don't quite understand what the actual issue is. Do ANY ROMs boot on your phone? The reason I ask is because you later contradict this original statement by saying something about A2SD moving your apps to the SD card.

Nigeldg said:
I still don't quite understand what the actual issue is. Do ANY ROMs boot on your phone? The reason I ask is because you later contradict this original statement by saying something about A2SD moving your apps to the SD card.
Click to expand...
Click to collapse
None ROM boots on my phone:/and i asked if A2SD installs the rom into SD or something...

tsagas said:
None ROM boots on my phone:/and i asked if A2SD installs the rom into SD or something...
Click to expand...
Click to collapse
A2SD does not install the ROM to NAND nor does it install NAND to SD. It install apps to your SD card, apps that you use on your phone.
NAND ROMs are flashed directly to your phone and completely remove Windows.
SD ROMS are ran from your SD card with your Windows still functioning when you want.

Dblfstr said:
A2SD does not install the ROM to NAND nor does it install NAND to SD. It install apps to your SD card, apps that you use on your phone.
NAND ROMs are flashed directly to your phone and completely remove Windows.
SD ROMS are ran from your SD card with your Windows still functioning when you want.
Click to expand...
Click to collapse
Hehe, Windows Mobile doesn't 'function', it simply exists

tsagas said:
None ROM boots on my phone:/and i asked if A2SD installs the rom into SD or something...
Click to expand...
Click to collapse
Have you installed MAGLDR and partitioned your internal memory by flashing ClockWorkMod Recovery(CWM)?? And Apps2SD doesnt install any rom. Its just used to transfer applications that run on the internal memory to the sd-ext.(partion of sd card)
Sent from my HTC HD2 using XDA

adil1508 said:
Have you installed MAGLDR and partitioned your internal memory by flashing ClockWorkMod Recovery(CWM)?? And Apps2SD doesnt install any rom. Its just used to transfer applications that run on the internal memory to the sd-ext.(partion of sd card)
Sent from my HTC HD2 using XDA
Click to expand...
Click to collapse
thats the thing...every time i try to flash CWM i get stucked on Go Go Go!(when i press AD Recovery)

I ve also tried to make bigger partitions and nothing happened...

tsagas said:
I ve also tried to make bigger partitions and nothing happened...
Click to expand...
Click to collapse
I have a hd2 too.
magldr 1.13 .... clockwormod 5.0.2.6 ... Nexushd2 ics 4.0.4 - rom... a2SD-Script ...
200mb nand-partition..5mb cache-partition.. 1 gb ext4-partition and 400 mb swap-partition
I installed my rom witht "hd2 toolkit 4.2.0.1", that can be downloaded here on "xda-developers".
With this tookit you can do followed things:
- Start with a "full wipe" called "task 29" (I think this "task 29" is necessary for your hd2, because of your problems and bad issues you are reporting)
- then partition your nand-memory (for first install i recommen 200mb nand an 40 mb cache - after you recognized that it works, you can reduce cashe to 10 or 5 mb)
- install magldr
- install clockworkmod recovery
- install your rom