Related
Can anyone lead me to where to find a spare enclosure (not an external case).
The one that holds the whole thing together. Ok I need some help here to find the right term
My Athena fallen and I now got a bent Athena. An art piece I'm sure, but rather have it back to its shape, you know?!
So does anyone know where to find spares?
why dont you take a picture so we could see what exactly you need
Will need to find a mirror as it is the only camera I have
Anyhow I just find what it is. Is the SHELL. The black aluminum shell.
Is anywhere to be found it as a spare?
Thank you
Look in this thread: http://forum.xda-developers.com/showthread.php?t=356828
silviu.h said:
Look in this thread: http://forum.xda-developers.com/showthread.php?t=356828
Click to expand...
Click to collapse
Thank you.
I ordered the spare casing. Will post how it goes....
Sorted!!
I have received the casing, followed instructions and I now have a bright new Athena
The only bad thing is that the camera button and the volume sliders are missing from the replacing casing. and the camera button is a nightmare to take it over from the old one.
If anyone needs assistance with replacing the casing, just PM and I'll do my best to help.
So which did you get in the end, the brando one?
I'm contemplating doing mine at some point, it's pretty scarred.
I did go for the brando and it took about a week to receive it in Scotland.
The instructions are quite easy to follow, but the tools are a must, specially the flat tool to push the parts open. I got mine here when I repaired my powerMAC a few weeks ago.
does someone know where to get a new digitizer? my one is broken (the LCD itself is still fine) and I ordered this one. But they refunded me my money and said they are out of stock
Any suggestions?
Try the brando website.
It looks like they have a lot of spare parts...
If you can't find it, try to contact them, I got a few parts not listed this way.
Good luck
nForce
does someone know where to get a new digitizer? my one is broken
Click to expand...
Click to collapse
You can try here
http://www.gpsmidlands.co.uk/index.php?category=Pda Digitisers
but this is £90 of her majesty money
the one in your ebay link for £19 is unbelievable, are they for real?
Regards
they said they are out of stock but they promised to contact me if they get some "digitizer-only"
currently they only have full LCD screens for £150
as far as I can see the dealer seems to be realiable...
So I bought a digitizer replacement kit on ebay for my N1. (I dropped it and my screen shattered.) I saw the iFixit teardown on the N1 and figured it'd be easy enough to do myself. The kit comes with tools to open it, but no adhesive to mount the new digitizer.(like the iPhone kits)
Basically I was just wondering what I should use to stick the new digitizer back in. Any advice from someone who's already done it would be great too.
Edit: Got the digitizer installed fine, phone booted, I giggled like a schoolgirl aaaand.. Couldn't unlock my phone. It wont respond to touch. Took it apart again to make sure it was connected properly... So now my only assumption is the digitizer I bought was defective.
Any help would be appreciated..
try asking the ebay seller
Thanks, I'll try that. Any other ideas?
maybe ask an electronics repair shop near you
RellikZephyr
Well I got it installed but it wont respond to touch.. Defective part?
I guess you've made sure it's plugged in right? Would definitely double check that
Sent from my Nexus One using the XDA mobile application powered by Tapatalk
TFJ4 said:
I guess you've made sure it's plugged in right? Would definitely double check that
Sent from my Nexus One using the XDA mobile application powered by Tapatalk
Click to expand...
Click to collapse
Yep I did. I contacted the seller on eBay and waiting for a reply. Unless you guys can think of something else I did wrong in the installation I'm sticking with it being defective.
have other people replaced the digitizer successfully on the N1? or perhaps it is some software difference that the new digitizer needs to be "read" by the software, but the OS is looking for the "old" digitizer still...i'm talking out my arse BTW..
RogerPodacter said:
have other people replaced the digitizer successfully on the N1? or perhaps it is some software difference that the new digitizer needs to be "read" by the software, but the OS is looking for the "old" digitizer still...i'm talking out my arse BTW..
Click to expand...
Click to collapse
I've seen a few people posting here saying they've done it, and I know one guy took pictures of the process. I understand what you're saying and it sounds logical enough, but I can't imagine the parts would be any different to cause that sort of problem.. Assuming the part I bought is legit.
Either way the seller should let me return it if the second one they ship out doesn't work.
i replaced my screen and digitizer yesterday using ebay tutorials i found. pm me and ill share but i bet you used the same ones. its a very delicate process. sometimes you have to be tough with it but at the same time not break the little guy. the only problem i could think of would be your connection. the only thing i fudged on minr was not cleaning the lcd before placing it back in. now i have two large fingerprints in my top right under my screen when i dim it.
disdain735 said:
So I bought a digitizer replacement kit on ebay for my N1. (I dropped it and my screen shattered.) I saw the iFixit teardown on the N1 and figured it'd be easy enough to do myself. The kit comes with tools to open it, but no adhesive to mount the new digitizer.(like the iPhone kits)
Basically I was just wondering what I should use to stick the new digitizer back in. Any advice from someone who's already done it would be great too.
Edit: Got the digitizer installed fine, phone booted, I giggled like a schoolgirl aaaand.. Couldn't unlock my phone. It wont respond to touch. Took it apart again to make sure it was connected properly... So now my only assumption is the digitizer I bought was defective.
Click to expand...
Click to collapse
I cast... THREAD NECROMANCY!!!
I believe I have the correct adhesive (3M double-sided sticky tape of some small sort), but I'm wondering if anyone has a better idea on how to get the old sticky gunk off of the LCD aside from using rubbing alcohol? Thoughts? Kthxbai.
EDIT: Also, did you ever get your phone working again?
hey guys, about half an hour ago i was cleaning the little gap thats left between the screen and the other part that hold the keyboard when opened.... using a little piece of photo paper covered with a really really thin coat... anyways, the thing is that somehow i managed to touch the freaking screen connection there and it went off now my screen is black... i want to now how to separate the two parts to plug the screen back there and see if its not broken
i found nothing on google... im kinda freaking out right now, help please
http://forum.xda-developers.com/showthread.php?t=731542
Google, first page.
PcFish said:
http://forum.xda-developers.com/showthread.php?t=731542
Google, first page.
Click to expand...
Click to collapse
thanks man...
aaand its dead, the connector of the screen is ripped in half (dont know how that happened) damn... if anyone know about a broken mytouch slide let me know to buy it... T_T
or can i fix it buying a new lcd screen??
the image shows whats broken... thats not my phone of course...
etu_aty said:
thanks man...
aaand its dead, the connector of the screen is ripped in half (dont know how that happened) damn... if anyone know about a broken mytouch slide let me know to buy it... T_T
or can i fix it buying a new lcd screen??
the image shows whats broken... thats not my phone of course...
Click to expand...
Click to collapse
You might be better off finding the ribbon cable. Check ebay.
If you replace the screen you'll need a digitizer too for the touch.
PcFish said:
You might be better off finding the ribbon cable. Check ebay.
If you replace the screen you'll need a digitizer too for the touch.
Click to expand...
Click to collapse
He should be able to separate the two, that would save some money. Just re-use the digitizer with the new screen.
KCRic said:
He should be able to separate the two, that would save some money. Just re-use the digitizer with the new screen.
Click to expand...
Click to collapse
thats what i was thinking but i cant find the damn lcd screen, i searched everywhere.... they just sell digitizers... also checked for the ribbon and nothing comes up... can someone link me up? pleaseeee
Did you check Ebay or Craigs list to see if anyone is selling a broken Slide? Maybe you can but one cheap for parts.
Sent from my T-Mobile myTouch 3G Slide using XDA App
There were a few sites that I found a few weeks back that had stock parts for almost every phone. I'll see what I can dig up and I'll update this post when I find something.
thanks guys, i did check ebay.. i have been checking since i broke mine and broken slides go up to $120 on ebay at the end of the auction... thats just too much
If you find a web page selling the lcd you will be my hero...
etu_aty said:
thanks guys, i did check ebay.. i have been checking since i broke mine and broken slides go up to $120 on ebay at the end of the auction... thats just too much
If you find a web page selling the lcd you will be my hero...
Click to expand...
Click to collapse
the same thing happened to my fone :O ive only had it for 4 days and today i noticed a ribbon sticking out, my screen went black too but on the good hand im going to return it and im thinking about getting the samsung vibrant
gamikzone said:
the same thing happened to my fone :O ive only had it for 4 days and today i noticed a ribbon sticking out, my screen went black too but on the good hand im going to return it and im thinking about getting the samsung vibrant
Click to expand...
Click to collapse
lucky you... im stuck with this since i bought it on ebay about a month ago
hey guys, well.. look like i found a webpage selling the ribbon (kinda)...
http://www.globaldirectparts.com/MyTouch-3G-Slide-Motherboard-Flex-Cable-p/htc739520.htm
its worth $60 but they are out of stock and you have to get at least 2 when you order!!
just my luck... ill keep searching around to see if something else comes up...
I have found nothing, im almost giving up on it
yeeeah
so finally i found a broken screen slide for $69 dollars and im getting if by dec 16th right on time to put some official froyo on it (hopefully) im happy i love the slide and i think is a good device, im not that impressed with the g2 or any 1ghz phone out there... im gonna wait for a real dual core powerhouse to come out or maybe ill give wp7 a try if it promises something good next year. if any moderator sees this thread, please close it
Hello.
The MicroUSB platform on the main-board of my HTC HD2, is broken. So I can't charge the phone nor transfer files.
I disassembled the phone and I need a new main-board now. The part number is 76H03923-XXM.
Where can I buy this part? I've contacted HTC a week ago, but still no answer.
If anyone have this part for sale, please contact me. Or if anyone have a broken HD2 (maybe broken screen), and wants to sell it then don't hesitate to contact me.
Metoo
mooooooa said:
Hello.
The MicroUSB platform on the main-board of my HTC HD2, is broken. So I can't charge the phone nor transfer files.
I disassembled the phone and I need a new main-board now. The part number is 76H03923-XXM.
Where can I buy this part? I've contacted HTC a week ago, but still no answer.
If anyone have this part for sale, please contact me. Or if anyone have a broken HD2 (maybe broken screen), and wants to sell it then don't hesitate to contact me.
Click to expand...
Click to collapse
Damn so it seams it wasn't only me that happend that. So did i broke my USG port and my phone does not charge. Plus went to the official reparement and they do not want to take responsability for it. They came with the vague excuse of "mainboard defect not covered by the warranty".
They showed me a photo of the board and as they saying my phone has humitty there for not there responsability...
I also wanted to buy a mainboard for my phone but i've searched everywhere and no luck.
Ahmun_Ra said:
Damn so it seams it wasn't only me that happend that. So did i broke my USG port and my phone does not charge. Plus went to the official reparement and they do not want to take responsability for it. They came with the vague excuse of "mainboard defect not covered by the warranty".
They showed me a photo of the board and as they saying my phone has humitty there for not there responsability...
I also wanted to buy a mainboard for my phone but i've searched everywhere and no luck.
Click to expand...
Click to collapse
To begin with, I sent mine for repair too. HTC wont take the responsibility for the phones broken USB port. They only sent me this picture showing the broken USB.
I haven't treated my phone bad, so i was very disagree with their decision. But they only gave me a link to the Danish court of appeal.
- So, what have you done now? Bought a new phone?
It's sad
mooooooa said:
To begin with, I sent mine for repair too. HTC wont take the responsibility for the phones broken USB port. They only sent me this picture showing the broken USB.
I haven't treated my phone bad, so i was very disagree with their decision. But they only gave me a link to the Danish court of appeal.
- So, what have you done now? Bought a new phone?
Click to expand...
Click to collapse
To me they came with the lane excuse of humitity in the board. I see that everything is a good excuse not to take responsability for theye'r crappy materials...
I've always been afraid of something like this happening. That's why as soon as I found out powermat made wireless charging for the HD2 I ordered it. It really sucks for everything to depend on one little port.
You might try this solution for now and just use wifi to transfer files. It makes flashing tough but at least it'll be working, and you can take your time looking for a new board.
http://www.powermat.com/us/powermat-wireless-charging-station-for-htc-hd2.html
Here's a 10% off coupon code too BZPM10
Try: http://www.mpt-pda.com/
Ahmun_Ra said:
To me they came with the lane excuse of humitity in the board. I see that everything is a good excuse not to take responsability for theye'r crappy materials...
Click to expand...
Click to collapse
I got exactly the same answer. "Humility on the board", it would cost me 550$ for HTC to change the Main-board.
buzz killington -->
I already have seen powermat buy can't buy it. I live in Denmark and they don't ship over here...
xmoo -->
Nothing there
--- For now, i ordered this one; http://www.dealextreme.com/details.dx/sku.40593... So i can charge the battery external.
mooooooa said:
I got exactly the same answer. "Humility on the board", it would cost me 550$ for HTC to change the Main-board.
buzz killington -->
I already have seen powermat buy can't buy it. I live in Denmark and they don't ship over here...
xmoo -->
Nothing there
--- For now, i ordered this one; http://www.dealextreme.com/details.dx/sku.40593... So i can charge the battery external.
Click to expand...
Click to collapse
Damn $550? Thats a new phone... They asked me €180 and i though they were crasy lolol. The 2nd battery n the charger for it i have one what really needed is something to replace the USB connection...
Try : http://www.globaldirectparts.com/HTC-HD2-Replacement-Repair-Parts-s/6112.htm
Can ask them on the part# for them to search.
Similar problem here. The Micro USB doesn't get inserted properly, seems like it's sticking out a mm too much, resulting in a very bad connection, whereas a few month ago the micro usb would stick in completely.
It now only charges, transfering content with a pc isn't possible anymore.
My thoughts were: if I buy a cradle, chances are that it would connect better due to the gravity (don't laugh ). Today I received the cradle but no result. It only charges, and I have a feeling the charging will stop in the near future.
I have the HTC HD2 for exactly two years and I found it very frustrating being confronted with what is in my thought a construction problem.
I've seen the link for dealxtreme, the external loader, but the comment posted below it, doesn't really encourage me to buy the item (high temperature)
Any other thoughts would be appreciated.
If you know anyone that can solder. They can detach it, and re solder it back onto the main-board. Shouldn't be too hard. I think? Should be possible.
Might help out some of you who have the same issues like I did. I used a toothpick to remove dust from the micro usb port. Although the connector still doesn't fit entirely, I now am able to transfer files again to my phone using the cable. Connenction still isn't that good, but might help.
htc broken port
Dear all. If you experience problems with changing your connector i can help.I have the equipment and will do the job for 20$ only (the price includes the brand new connector) Only problem is that you must ship it to Bulgaria so i can do the job. If anyone is interested can pm me.
AW
mobile shop
thank you
Is there a way to change the partition size witout USB?
EDIT: Is it possible to feed the power directly to the battery connector, and if so how? I could solder a simple circuit if this would be necessary to use a USB adapter as power source
Micro-USB
How can I change myself my micro-usb (for HTC HD2) . Are there a tutorial ? or any videos ? Where could I find all accessories and components required for the repair?
I think the accessories will cost more than a new HD2... I think you can´t do it by yourself because its to tiny
Bad idea!
Kelvir said:
How can I change myself my micro-usb (for HTC HD2) . Are there a tutorial ? or any videos ? Where could I find all accessories and components required for the repair?
Click to expand...
Click to collapse
If you're not a master of soldering, don't even think to!
Any "Masters of Soldering" out there? I would pay for it...
i6amokk doesn´t answer to my PM
EDIT: I bought a second HD2 with damged, but working screen... Now I change the Mainboard, that I have a completly OK HD2 an one with damaged Screen and broken USB. Now how can I stabilize the USB Port to prevent that the new Mainboard get broken too?
And i6amokk anserwed, I sent him Pictures but I,ve not much hope, because the top Layer of the MB is damaged...
My big bulky phone with the big bulky extended battery dropped to the floor as I got up from my chair, not realising that the usb cord had decided to entangle me. Next thing I know, my precious hd2 is lying on the floor, screen faced down, and the usb cord "ripped".
Everything seemed to be working fine, but when I tried plugging it into my dock, it wouldn't charge, so I tried holding it at angles - it worked, but whenever i let go, it would stop charging.
Does anyone know how to fix this without having to take the whole thing apart?
Sorry friend but you will have to take the phone apart to fix this problem. Might even have to replacecthe mainbosrd as the USB port is attachedcto the mainboard and can not be replaced seperately.
T-Macgnolia said:
Sorry friend but you will have to take the phone apart to fix this problem. Might even have to replacecthe mainbosrd as the USB port is attachedcto the mainboard and can not be replaced seperately.
Click to expand...
Click to collapse
I was really hoping not to hear that .... but ty for the reply, I'm just going to go to the side and sob for a bit because I can't afford to get mobo replaced, I can't afford much right nw.
As a temporary solution you could buy a wall charger and an extra battery off ebay for a couple of bucks, changing and charging batteries on the go works for me!
Sent from my HD2 with WP7 using XDA Windows Phone 7 App
se1988 said:
As a temporary solution you could buy a wall charger and an extra battery off ebay for a couple of bucks, changing and charging batteries on the go works for me!
Sent from my HD2 with WP7 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
ty, but I'm worried that it'll get worse in the long term (long being anything over a couple of days), ie. completely stop working, and data transfer? I'd have to use wireless adb to do transferring.
Is it still under warranty? You might get lucky
Sent from my HD2 with WP7 using XDA Windows Phone 7 App
se1988 said:
Is it still under warranty? You might get lucky
Sent from my HD2 with WP7 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
I looked at the warranty terms and conditions, and it says that anything that has to do with the usb port area will not be considered as being part of the warranty, and I don't have the receipt because I got it 2nd hand. :'(
it could be fixed, but the port must be resoldered to the motherboard. In case some circuit tracks were broken in the incident, they will have to be remade, a good service center could handle it.
Most of them aren't too fond of using real electronic measurements and algorithms in order to track corresponding usb port pins to various points on the motherboard but it's not impossible. If my hd2 would have been damaged in this way i won't hesitate to crack it open and get my hands dirty
If I wanted to, how much do you think I'd be able to sell it for? Thinking of selling it, and mybe getting a used tmous, if I can afford it.
I've managed to find some tmous on sale, so, what do you guys reckon I could sell mine for?
When I broke my first LEO512 by thinking I could repair it, I took the individual components (Case, chassis, motherboard) out and sold them on ebay. I got about £119 in total for it all
You could always sell it for full price and let the buyer find out themselves what's wrong with it.
Sent from my HTC Vision using XDA App
Skellyyy said:
You could always sell it for full price and let the buyer find out themselves what's wrong with it.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
lol.. sry mate, but I don't want to cheat anyone. I might try the marketplace as well then.
aiden120000 said:
When I broke my first LEO512 by thinking I could repair it, I took the individual components (Case, chassis, motherboard) out and sold them on ebay. I got about £119 in total for it all
Click to expand...
Click to collapse
Great suggestion. This is what I would do.
se1988 said:
Great suggestion. This is what I would do.
Click to expand...
Click to collapse
I'm just too scared that I'll mess it up and just make it even worse, thinking of selling it, getting what I can for it, and getting another second hand.
I have this problem my micro usb port has completely broke, and the circuit lines on the mother board are screwed up, HTC will not touch it
gone the route of a wall charger for now came with another battery for £8 delivered so im happy i can still use my phone, while looking on Evilbay for a new hd2
facdemol said:
it could be fixed, but the port must be resoldered to the motherboard. In case some circuit tracks were broken in the incident, they will have to be remade, a good service center could handle it.
Most of them aren't too fond of using real electronic measurements and algorithms in order to track corresponding usb port pins to various points on the motherboard but it's not impossible. If my hd2 would have been damaged in this way i won't hesitate to crack it open and get my hands dirty
Click to expand...
Click to collapse
Finally had the courage to open it, and as you said, the connections are more or less broken off, and I've got shaky hands (without nerves) and can't handle soldering it, so I'm thinking of patching it up with some blue tack
T-Macgnolia said:
Sorry friend but you will have to take the phone apart to fix this problem. Might even have to replacecthe mainbosrd as the USB port is attachedcto the mainboard and can not be replaced seperately.
Click to expand...
Click to collapse
hi T-macgnolia ....(dont take this as an argument... just curious ) i just saw a replacement micro usb port for hd2 on ebay.... so is that usb port on ebay just to fool us or can it actually be replaced
Ok, short story - nt gnna work, does anyone have the bottom part of the motherboard up for sale?
Just got even better, looks like the lcd's broken now