Related
Applied the latest Rogers ROM...what a bad move...
Now my HTC Magic got stuck in RUU screen showing the following:
SAPPHIRE UNKNOWN 32A SHIP S-OFF H
HBOOT-1.76.0010 (SAPP50000)
CPLD-11
RADIO-6.35.10.18
Jan 14 2010, 00:14:58
RUU
I tried many ways to get rid of this screen but didn't work.
My phone original has the rogers 2.17.631.2 build, and I did a bad move to upgrade to Android 1.5.=( The RUU process flashed my HBOOT and RADIO, but as soon as it starts the "system" steps, the screen shows unzipping for over an hour and eventually failed. Now my phone will start up with the above screen only!! i can't get myphone startup in recovery mode or fastboot mode.
I tried re-run the RUU porgram on my PC and the tool still shows i have the old anroid build. Hence i know that i now have NEW HBOOT and RADIO but still the old Android build.
Is there a way for me to get out of this RUU screen? Any help is appreciated.
Is the security off (S-OFF) allows me to downgrade the SPL? If so, how can i do that given i can only boot my HTC Magic in this screen only.
One more side note, fastboot can detect the phone.
Urgently need help! Appreciated.
If you have constant security S-OFF, it accepts all ROMs and HBoot and RUU. Probably you have engineering Magic (not Hboot, the whole device)
1. Try this...
If fastboot can detect phone, so try flash Amon_RA Hero recovery http://forum.xda-developers.com/showthread.php?t=561124
fastboot flash recovery recovery.img
(recovery.img or other filename must be in folder with fastboot.exe)
Then start into recovery (Home + Power) and flash CursorSense
If you need original ROM (without root), so search forum for it
(it has been posted already). Just get rom1.zip (system.img, userdata.img and more...) and flash it (Saying again: official doesn't contain root)
2. Or try run another RUU
5[Strogino] said:
Oh... you have S_OFF after official upgrade, it isn't often to meet.
If fastboot can detect phone, so try flash Amon_RA Hero recovery
fastboot flash recovery recovery.img
(recovery.img or other filename must be in folder with fastboot.exe)
Then start into recovery (Home + Power) and flash CursorSense
If you need original ROM (without root), so search forum for it
(it has been posted already). Just get rom1.zip (system.img, userdata.img and more...) and flash it (Saying again: official doesn't contain root)
Click to expand...
Click to collapse
but the fastboot method requires engineering SPL, but my phone was upgraded to the perfected SPL. Shall I try the RA_Hero or RA_Sapphire ?
ngecw said:
but the fastboot method requires engineering SPL, but my phone was upgraded to the perfected SPL. Shall I try the RA_Hero or RA_Sapphire ?
Click to expand...
Click to collapse
Yes, common fastboot required to be engineering. But you have S-OFF now, so no checks.
use RA_Hero, cause you have radio 6.35.X.X
5[Strogino] said:
Yes, common fastboot required to be engineering. But you have S-OFF now, so no checks.
use RA_Hero, cause you have radio 6.35.X.X
Click to expand...
Click to collapse
Tried flashing the recovery.img (RA_Hero) but failed.
i typed fastboot flash recovery recovery.img [ renamed the file to recovery.img] but got the error...
sending 'recovery' <3362 KB>... OKAY
writing 'recovery'... FAILED <remote: image type not support>
Just to clarify more, the screen only shows "RUU USB" not "FASTBOOT" although fastboot can see my device... could that be the reason why it failed?
According to your 2nd suggestion, where can i find other RUU and how do i know which is the proper one?
ngecw said:
Applied the latest Rogers ROM...what a bad move...
Now my HTC Magic got stuch in RUU screen showing the following:
SAPPHIRE UNKNOWN 32A SHIP S-OFF H
HBOOT-1.76.0010 (SAPP50000)
CPLD-11
RADIO-6.35.10.18
Jan 14 2010, 00:14:58
RUU
I tried many ways to get rid of this screen but didn't work.
My phone original has the rogers 2.17.631.2 build, and I did a bad move to upgrade to Android 1.5.=( The RUU process flashed my HBOOT and RADIO, but as soon as it starts the "system" steps, the screen shows unzipping for over an hour and eventually failed. Now my phone will start up with the above screen only!! i can't get myphone startup in recovery mode or fastboot mode.
I tried re-run the RUU porgram on my PC and the tool still shows i have the old anroid build. Hence i know that i now have NEW HBOOT and RADIO but still the old Android build.
Is there a way for me to get out of this RUU screen? Any help is appreciated.
Is the security off (S-OFF) allows me to downgrade the SPL? If so, how can i do that given i can only boot my HTC Magic in this screen only.
One more side note, fastboot can detect the phone.
Urgently need help! Appreciated.
Click to expand...
Click to collapse
the rogers ROM is not working right. Too many crashes and so on .. so try this one
RUU_Sapphire_HTC_Europe_3.05.401.3_release_signed_NoDriver.exe
You can download it from HTC main site ...
Also, you have to keep in mind that you can RUU as many as you want. So do the procedure again and keep us posted if it's working. If not send me a PM and i'll resolve it step by step.
best of luck !
I have one Magic and it show in Bootloader :
PVT 32 S-OFF
1.76.0007 (SAPP*****).
Why the SAPP is SAPP*****? Is there something wrong?
Also, the device detected by fastboot is 1234567890... , not like other HTC Magic.
Now I get stuck with RUU Flash at 81% (Hong Kong RUU). --> When the device start to update system STEP. So the Magic now just show RUU, can connect by Fastboot but when use fastboot flash system or recovery, only can send to phone and write error.
Anybody help me to solve this?
ntphuong said:
I have one Magic and it show in Bootloader :
PVT 32 S-OFF
1.76.0007 (SAPP*****).
Why the SAPP is SAPP*****? Is there something wrong?
Also, the device detected by fastboot is 1234567890... , not like other HTC Magic.
Now I get stuck with RUU Flash at 81% (Hong Kong RUU). --> When the device start to update system STEP. So the Magic now just show RUU, can connect by Fastboot but when use fastboot flash system or recovery, only can send to phone and write error.
Anybody help me to solve this?
Click to expand...
Click to collapse
I do have the same problem with my RUU flash with the new Rogers RUU. Stuck at 81% when device starts updating at step[4] "system". Phone will show "unzipping" for over an hour and eventually failed with error code [155].
I tried the RUU_Sapphire_HTC_Europe_3.05.401.3_release_signed_ NoDriver.exe but still the same problem. Can anyone help here?
Did more investigation, and seems like both RUU ROMs i tried might not match the CID, hence the system ROM updating failed.
Now the question is, i am stuck in RUU and cannot use adb to check my CID now. How can i manually update the system ROM given i am in RUU mode only?
How can i manually update the HBOOT and RADIO if i am stuck in RUU screen? If the RUU program can automate the process in one click, is there program to allow me to update each individually? Note that i cannot get into fastboot mode.
Any advice? Thanks!
Help
ngecw said:
Did more investigation, and seems like both RUU ROMs i tried might not match the CID, hence the system ROM updating failed.
Now the question is, i am stuck in RUU and cannot use adb to check my CID now. How can i manually update the system ROM given i am in RUU mode only?
How can i manually update the HBOOT and RADIO if i am stuck in RUU screen? If the RUU program can automate the process in one click, is there program to allow me to update each individually? Note that i cannot get into fastboot mode.
Any advice? Thanks!
Click to expand...
Click to collapse
Same problem here. Can someone help?
Thanks in advance.
ntphuong said:
I have one Magic and it show in Bootloader :
PVT 32 S-OFF
1.76.0007 (SAPP*****).
Why the SAPP is SAPP*****? Is there something wrong?
Also, the device detected by fastboot is 1234567890... , not like other HTC Magic.
Now I get stuck with RUU Flash at 81% (Hong Kong RUU). --> When the device start to update system STEP. So the Magic now just show RUU, can connect by Fastboot but when use fastboot flash system or recovery, only can send to phone and write error.
Anybody help me to solve this?
Click to expand...
Click to collapse
I had a 32B G2,it was brikked at the first time when I ruu flash the rom(Sense official). G2 couldn't received any RUU rom.it would stop at 22%.
Today,when I ruu flash the rom（HTC_Europe_3.04.401.2）,I also found it stop at 81%.
SPL is updated to 1.76.0008 from 1.76.0007.
It seems much better than before. But it still could not accept the cmd "adb shell"
Hoping somebody could help us.
I used the following RUU after upgrading to sense RUU stopped at 81%
hxxp://suntharee.com/android/RUU_Sapphire_HTC_Asia_WWE_2.53.707.2_SEA_test_sign ed_NoDriver.exe
Here is another link, its the first RUU in this post:
hxxp://forum.xda-developers.com/showthread.php?t=548096
You will end up with an ENG SPL that allows you to flash what ever you want then.
I manually updated Radio and SPL and now using CursorSense ROM.
Obviously replace the "hxxp" with "http". Hope it helps at least some of you like it did for me.
Rugga said:
I used the following RUU after upgrading to sense RUU stopped at 81%
hxxp://suntharee.com/android/RUU_Sapphire_HTC_Asia_WWE_2.53.707.2_SEA_test_sign ed_NoDriver.exe
Here is another link, its the first RUU in this post:
hxxp://forum.xda-developers.com/showthread.php?t=548096
You will end up with an ENG SPL that allows you to flash what ever you want then.
I manually updated Radio and SPL and now using CursorSense ROM.
Obviously replace the "hxxp" with "http". Hope it helps at least some of you like it did for me.
Click to expand...
Click to collapse
I tried but already got stuck in the first step of unzipping system.img. Looks like this RUU will upgrade system first before HBOOT and RADIO, hence i am still stuck with Perfected SPL.
Given that my phone has security off (SOFF), is there way to downgrade my HBOOT?
I had the same problem when HK SenseUI appeared and I managed to pass the RUU screen with a gold-card. You will find tutorials in this forum.
Good luck!
vbucuroiu said:
I had the same problem when HK SenseUI appeared and I managed to pass the RUU screen with a gold-card. You will find tutorials in this forum.
Good luck!
Click to expand...
Click to collapse
Were you upgraded to the latest perfected SPL when the same problem happens? I had my goldcard configured properly, but everytime i run RUU, the process hang at 81%, which is the time when unzipping system.img happens.
I understanding the latest SPL is still yet hard to crack, but will my phone being S=OFF, can have some ways to get the system check bypassed?
Thanks!
Hi. I have the some problem. My magic stops at 81% (system - unzipping), or when i try with another RUU_.exe stops at 22% (system - unzipping).
S-ON.
Anyone can help us?
PS: Sorry for my english.
(
Nobody knows?
ONX said:
Nobody knows?
Click to expand...
Click to collapse
Same boat...
ONX said:
Hi. I have the some problem. My magic stops at 81% (system - unzipping), or when i try with another RUU_.exe stops at 22% (system - unzipping).
S-ON.
Anyone can help us?
PS: Sorry for my english.
Click to expand...
Click to collapse
What did you do??? 32B Magic not compatible with RUU Upgrades
What exactly do you have? You posted in one place - that you have 32B
But on picture you have 32A
I installing RUU_Sapphire_HTC_Europe_3.05.401.3_release_signed_NoDriver.exe
I make a goldcard for installing _HTC Magic_RUU_Sapphire_SMC_Voda_WWE_3.03.990.6_release_signed_NoDriver.exe (with this update can enter in fastboot and vol down + power) but stops when loading system.img
Sorry for my english.
Yes, i have 32B.
Before:
SAPPHIRE PVT 32B Ship S-ON H
HBOOT-1.33.0010 (SAPP10000)
CPLD 10
RADIO-3.22.20.17
Jun 2 2009 17.28.28
After:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.007 (SAPP10000)
CPLD-10
RADIO-6.35.07.29
Aug 4 2009, 19:43:30
Hello All,
I have been trying for the past few hours to root my HTC Magic 32B (Vodafone UK) and flash Cyanogen to get me some android 2.2!
The phone was on Android 1.6 before i started the process. I have since managed to roll it back to the vulnerable 1.5 version using a goldcard and sapping.zip
I have also managed to push RA-sapphire-v1.7.0H onto the phone.
Now every time i wipe and then flash any of the cyanogen ROMs using the recovery mode, it hangs at the Vodafone screen when booting. Now I had a look around and there were suggestions of trying a different ROM. I tried this and get the same result every time. I have installed 4 different versions of Cyanogen as well as numerous other ROMS.
An interesting point, I have a magic 32b and yet when trying to push the 'G' version of the recovery-RA file, the phone does not turn up under 'adb devices' but when pushing the H version, the phone responds as it should and loads the correct recovery file. I have tried both 32A and 32B ROMs to no avail they both still lock up at the Vodafone splash screen
I can restore to 1.5 without any problems, but I dont want to be stuck on this version of Android
A little info about the phone:
Firmware version: 1.5
Build Number: 2.16.151.1 146733 CL#31685 test-keys
SAPPHIRE PVT 32B SHIP S-ON H
HBOOT-1.33.0009 (SAPP10000)
CPLD-10
RADIO-3.22.20.17
May 8 2009,21:02:32
Many thanks in advance for any help you can provide!
There is guide on wiki.cyanogen you must be ona 1.5 version just read whole guide and it will be a success
If you have RA -h recovery working use it to flash hboot 1.33.2009
Then boot into fastboot and issue
Code:
fastboot erase system -w
fastboot erase boot
Here you can either boot onto recovery and flash the ebi1 version of cm. (Yes historical for 32a but seems your newer rom is using the 32a radio)
Or install a 2.x radio via fastboot (you must not flash it from recovery or you will brick your phone)
Last I checked cm wiki deals with 32a radios on 32b devices badly
Diekund said:
An interesting point, I have a magic 32b and yet when trying to push the 'G' version of the recovery-RA file, the phone does not turn up under 'adb devices' but when pushing the H version, the phone responds as it should and loads the correct recovery file.
SAPPHIRE PVT 32B SHIP S-ON H
HBOOT-1.33.0009 (SAPP10000)
CPLD-10
RADIO-3.22.20.17
May 8 2009,21:02:32
Click to expand...
Click to collapse
1) You see the last "H" in the first line of your info?
That means you need to use H-recovery and not G-recovery!!!
First problem solved....
2) You see the radio version 3.22.20.17?
Thats is only for 32A boards.. be lucky that you did not brick your device..
You need this radio and only this radio: 2.22.19.26I
But there is something wrong with combination of the info you wrote..
All 32B devices have G as the last letter in the first line of thire spl..
Are you sure that what you wrote is correct?
To solve this, flash back your stock version... use RUU or whatever... No sappimg or goldcard...
Just bring back the phone to where is was when you got it from the shop.
Then follow this guide made by me:
http://forum.xda-developers.com/showthread.php?t=756942
it will root you device in 5 mins... and for 5 min extra you get custom recovery and engineer spl( <-optionel)... FULL CONTROL OF DEVICE, the right way!
mumilover said:
2) You see the radio version 3.22.20.17?
Thats is only for 32A boards.. be lucky that you did not brick your device..
You need this radio and only this radio: 2.22.19.26I
Click to expand...
Click to collapse
This is FUD .. thats why its not bricked.
3.x = EBI1 (The -h recovery [magic] and -r recovery [dream*] is EBI1)
2.x = EBI0 (The -g recovery [magic] and default recovery [dream*] is EBI0)
* Please don't install the dream recovery on the magic it won't work its missing a config file for sapphire
both magic 32a/32b can run both
HOWEVER you must have the correct kernel to boot the device and if you have a 3.x radio and flash a radio from recovery you will brick since your current recovery can't boot after the flash.
Easiest is as I said install the engineering SPL that also supports both radios and fastboot yourself a stable system.
(the only reason its not booting with the EBI1 magic32a rom now is probably its not being properly wiped)
As far as using fastboot to restore a 2.x radio and -G recovery:
32A devices (ignoring the fender for the moment) will not be able to use all their memory on a 2.x radio
32B devices run the same on both radios; however more roms assume you have a 2.x radio.
If you go to cyanogens website, the EBI1 kernel should be available in the downloads. Just reflash the 5.0.8.zip, then flash the EBI1.zip, and then GAPPS.
EDIT: Here you go http://forum.cyanogenmod.com/topic/394-cyanogenmod-5-for-dreammagic-mean-lean-pastry-machine-v508-06192010/.
Sent from my HTC Magic using XDA App
DonJuan692006 said:
If you go to cyanogens website, the EBI1 kernel should be available in the downloads. Just reflash the 5.0.8.zip, then flash the EBI1.zip, and then GAPPS.
Sent from my HTC Magic using XDA App
Click to expand...
Click to collapse
you rock my world haha
Thanks so much buddy, this little trick hit the spot and im now running android 2.2! hopefully its nice and easy to update my roms from now on
Ok Guys, I know there are probably millions of threads already started about this, but I really dont know how to put it.
Not long ago I flashed the official 2.2 ROM, and tried to flash DSP manager over it. It didnt work. I couldnt boot into the rom, I had a weird SPL and radio and stock recovery. I made a goldcard, downloaded a SAPPHIMG.nbh file from god knows where, and started again. I have a horrible feeling it might of been the rogers 32A rom.
BUT, I am now stuck on 1.5, Rooted with Super One Click and I cant boot into recovery at all. I cant flash recovery through Clockworkmod, or FlashRec. It flashes it, I just can't boot into the recovery at all! I can't even do it through fastboot, because of my perfected stock SPL. A goldcard doesn't help either, I just keep getting errors. Is it possible to corrupt your recovery partition?
RADIO: 3.22.20.17
CPLD: 10
HBOOT: 1.33.0009
I feel like I'm in a really horrible situation here, but I'm glad its not fully bricked. What Solutions are there to this problem?
Thank you so much guys! I really appreciate your help, in advance
EDIT: I can use fastboot, But I still cant boot recovery, even after flashing it from there. Can I just flash a rom through Fastboot?
Well... you have to flash the right recovery...
Follow my root guide( check my signature).
Just jump the androot part of it (you already have root you say).
Flash both the recovery and eng spl.
Once the recovery and spl is all good (and you have s-off in fastboot) you should flash the right radio. I belive it's 2.22.19.26I.
Then reboot and check your fastboot info.
You should have something like this:
Sapphire pvt 32B eng s-off
Hboot 1.33.2010
CPLD: 10
Radio 2.22.19.26I
Now, flash any 32B rom and you should be good to go!
Good luck.
mumilover said:
Well... you have to flash the right recovery...
Follow my root guide( check my signature).
Just jump the androot part of it (you already have root you say).
Flash both the recovery and eng spl.
Once the recovery and spl is all good (and you have s-off in fastboot) you should flash the right radio. I belive it's 2.22.19.26I.
Then reboot and check your fastboot info.
You should have something like this:
Sapphire pvt 32B eng s-off
Hboot 1.33.2010
CPLD: 10
Radio 2.22.19.26I
Now, flash any 32B rom and you should be good to go!
Good luck.
Click to expand...
Click to collapse
That would be good, If I didnt just wipe the system via fastboot thinking I could just flash another rom..
Ok... then flash the recovery using fastboot...
How come you can erase partitions using the fastboot?
mumilover said:
Ok... then flash the recovery using fastboot...
How come you can erase partitions using the fastboot?
Click to expand...
Click to collapse
I Followed this guide.. http://www.firstdroid.com/tutorials/htc-magic-sapphire-tutorials-htc-magic-sapphire-guias/how-to-load-a-rom-with-fastboot/comment-page-1/#comment-3486 I get a error saying the recovery isn't signed. Latest version of Amon RA.
Well that's because you have a perfected spl...It will not allow you to flash anything from fastboot.
You have to get access to the system again. Just flash a completable RUU for your device.
When you get your system back again, then use my guide to root and get custom recovery(check my signature).
mumilover said:
Well that's because you have a perfected spl...It will not allow you to flash anything from fastboot.
You have to get access to the system again. Just flash a completable RUU for your device.
When you get your system back again, then use my guide to root and get custom recovery(check my signature).
Click to expand...
Click to collapse
Ok, will try that
ketchup539 said:
Ok, will try that
Click to expand...
Click to collapse
Ok, Tried flashing an RUU, would't let me, because the phone had to be switched on and booted into android to do so. I have tried the goldcard more than 8 times, either to get a "main version is older" or "invalid CID" message. What else can I do? Have I effectively bricked my phone?
NO.. you have not bricked you phone.. when you do brick it, believe me, you will know!
You have a faulty goldcard... redo it... you should not get invalid CID!
Main version older, maybe... but not invalid CID... that's is the point with goldcard... to avoid CID checks :0)
Type this in fastboot:
Code:
fastboot getvar version-main
Post here the outcome!
Can you also please change the title... it's not that urgent :0)
mumilover said:
NO.. you have not bricked you phone.. when you do brick it, believe me, you will know!
You have a faulty goldcard... redo it... you should not get invalid CID!
Main version older, maybe... but not invalid CID... that's is the point with goldcard... to avoid CID checks :0)
Type this in fastboot:
Code:
fastboot getvar version-main
Post here the outcome!
Click to expand...
Click to collapse
This is the outcome of the above command:
clients:tools pjamessteven$ ./fastboot getvar version-mainversion-main: 2.16.151.1
So, Is there any way to fix "main version is older"?
I must of (finally) got a working goldcard, because I'm no longer getting invalid CID errors.
same boat maybe different scenary, stuck RUU or RUU USB:
Code:
SAPPHIRE PVT 32A ENG S-ON H
HBOOT-1.76.0008 (SAPP60000)
CPLD-12
RADIO-3.22.20.17
NOV. 3 2009,15:56:29
C:\roottools\windows>fastboot getvar version-main
version-main: 3.03.527.3_R
finished. total time: 0.000s
Can´t flash, maybe there is a solution, but I haven´t found it.
ketchup539 said:
This is the outcome of the above command:
clients:tools pjamessteven$ ./fastboot getvar version-mainversion-main: 2.16.151.1
So, Is there any way to fix "main version is older"?
I must of (finally) got a working goldcard, because I'm no longer getting invalid CID errors.
Click to expand...
Click to collapse
Well... the problem is that you used a 32A sappimg.zip to update your device with.
The newest RUU for the 32B device is 1.91.177.1....
So you in a not so good a situation. You cannot use the goldcard to update back in main-version (the good old main-version-older error).
I have no idea how you can get your self out of this.. i will wait until a new RUU for the 32B device is available... is should be that long... there is the 2.2 update... no still no RUU!!!
If you have any way to boot into custom recovery or the similar we can fix it... not before.
meupc said:
same boat maybe different scenary, stuck RUU or RUU USB:
SAPPHIRE PVT 32A ENG S-ON H
HBOOT-1.76.0008 (SAPP60000)
CPLD-12
RADIO-3.22.20.17
NOV. 3 2009,15:56:29
C:\roottools\windows>fastboot getvar version-main
version-main: 3.03.527.3_R
finished. total time: 0.000s
Can´t flash, maybe there is a solution, but I haven´t found it.
Click to expand...
Click to collapse
You have a different problem... you have wrong spl/radio combo.
But maybe i will test something. Check your pm!
OK, thanks mumilover, replied and added.
mumilover said:
Well... the problem is that you used a 32A sappimg.zip to update your device with.
The newest RUU for the 32B device is 1.91.177.1....
So you in a not so good a situation. You cannot use the goldcard to update back in main-version (the good old main-version-older error).
I have no idea how you can get your self out of this.. i will wait until a new RUU for the 32B device is available... is should be that long... there is the 2.2 update... no still no RUU!!!
If you have any way to boot into custom recovery or the similar we can fix it... not before.
Click to expand...
Click to collapse
Fixed! I was on a 32A sappimg.nbh, flashed 2.53.707.2 sappimg.zip which was also 32A, but it booted (!) and from there I was able to flash the original mytouch COC10 cupcake. I ugraded to donut, then flashed the official 2.2 OTA
Thanks for your help
Yesterday I got a phone from a friend. Mytouch3g
he gave it to me because it got stuck on the green splash screen.
I thought to myself hey i can probably fix it... well im out of ideas.
FASTBOOT:
SAPPHIRE PVT 32B ENG S-OFF
HBOOT-1.33.2005 (SAPP30000)
CPLD-10
RADIO-3.22.20.17
Apr 20 2009, 15:30:43
When i got it i was S - ON
i followed this tutorial
http://theunlockr.com/2009/08/14/how-to-root-your-mytouch-3g/
And i have gotten to S-OFF
Now i tried to flash some ROMs that i downloaded from here but no matter what i do it still gets stuck on the the green splash screen.
Also the recovery flash didn't stick
i always have to run this to get to the custom recovery
fastboot boot recovery-RAv1.2.0H.img
i don't know what else to try or what rom to try to get this thing to boot to android. And im afraid that if i keep messing with it I will brick it completely.
Please give me some ideas or directions on what to do.
Thx.
Im on TMOBILE US
OH I also tryed the RUU's but non of the US once worked.
I would just like it back to stock.
No one has any suggestions or ideas?
I spend many hours on the website and the interwebs and followed all sorts of tips and suggestions.
Also none of the threads with the stuck on the green splash have any resolution and concrete solutions.
Are you actually flashing the recovery, or just booting it? Try fastboot flash instead of boot.
Also you have the 3.22 radio, so you have to either change it, or use an ebi1 kernel. I would recommended finding ezterrys guide to update to 2.22.28.25 radio and 1.33.0013d spl
tvall said:
Are you actually flashing the recovery, or just booting it? Try fastboot flash instead of boot.
Also you have the 3.22 radio, so you have to either change it, or use an ebi1 kernel. I would recommended finding ezterrys guide to update to 2.22.28.25 radio and 1.33.0013d spl
Click to expand...
Click to collapse
Yes i have flashed the new radio
This is what it had original .. i wrote it down
SAPPHIRE PVT 32B SHIP S-ON
HBOOT = 1.33.0013(SAPP30000)
CPLD - 10
RADIO 2.22.28.25
OCT 21 2009, 22:23:27
I tryed fastboot flash system recovery-RAv1.2.0H.img ... but that didn't hold.
Is this wrong?
djm3ph said:
Yes i have flashed the new radio
This is what it had original .. i wrote it down
SAPPHIRE PVT 32B SHIP S-ON
HBOOT = 1.33.0013(SAPP30000)
CPLD - 10
RADIO 2.22.28.25
OCT 21 2009, 22:23:27
I tryed fastboot flash system recovery-RAv1.2.0H.img ... but that didn't hold.
Is this wrong?
Click to expand...
Click to collapse
Several issues there... your flashing an old version of ra for the 3.22 radio to the system partition. You need to do this:
fastboot flash recovery recovery.img
And you need the G version of amon_ra recovery.
and you need to get back to an eng spl to do that...
OK well it sounds like i'm am definitively doing this wrong.
There is so much information and so many threads of doing different things, how ever i did not find one that has a complete spoon fed step by step tutorial.
STEP 1?
So download one of these from this thread
http://forum.xda-developers.com/showthread.php?t=530492
Latest :
recovery-RA-sapphire-v1.7.0G.img (Click here to download from a Mirror) - MD5Sum: 8b3b5ff90575eba0c5bfc13c0fa6b8ea
recovery-RA-sapphire-v1.7.0G-cyan.img (Click here to download from a Mirror) - MD5Sum: 8846b53e3184d688e3e8a628ad81074f
and what is the command to flash it????
fastboot devices (to make sure that fastboot "sees" your device)
fastboot flash recovery recovery-RA-sapphire-v1.7.0G.img
Is this correct? How do i get the Radio/SPL. What should i search for?
I found this
http://forum.xda-developers.com/showthread.php?p=10692873#post10692873
RADIO
The new froyo OTA for the Fender/MT2.1 is RADIO-2.22.28.25 This is the same 2.22.28.25 that was pushed to the 32B phones.
If you have a rooted phone and wish to upgrade you can use the safe zip file I've provided before:
update_2.22.28.25_S.zip // mirror
md5: 2e384ab42da375458fdb135063b7536b
This will verify your system can safely install the new radio and ask you to install it.
Note: please ensure you have a backup before flashing this radio sometimes is known for some wacky things on first boot until you can get into the system and verify the clock is set correctly.
HBOOT
The new 32b HBOOT is the one you have always been using 1.33.0013
I've more recently have made a hacked version 1.33.0013d primarily for the Dream to have a larger /system size; However currently I also recommend it for 32b magic/sapphire users due to its reduced restrictions on flashing NBH files, as well as access to fastboot erase.
Since I don't think there is any nbh file safe to flash on the fender/MT1.2 the benefits of installing 1.33.0013d seem minimal on your phone.. however for advanced users, it will unlock fastboot erase. (useful for swapping roms; however most people can just use Super Wipe)
If you do wish to update to this I have a special update.zip to migrate from 1.33.0013 -> 1.33.0013d
update-1_33_0013-to-1_33_0013d_S.zip
MD5: a68743f0b0e40aec9e18cbd02e6128fa
Click to expand...
Click to collapse
how do i flash these?
BTW i appreciate all you help and support and if i figure it out, I will put together a detailed set of instructions for others that encounter this specific issue.
You have to get an Eng spl. Probably by flashing a sappimg with one. I'm on my phone and am too lazy to find one for you.
After that just flash recovery, radio, and hboot like ezterrys thread says.
fastboot flash hboot hboot.img (1.33.0013 or 1.33.0013d hboot)
fastboot flash radio radio.img ( 2.22.27.08 or 2.22.28.25)
fastboot flash recovery recovery.img
fastboot reboot-bootloader
I'm pretty sure those commands are right, but they are from memory and could be spelled wrong or be in the wrong order.
tvall said:
You have to get an Eng spl. Probably by flashing a sappimg with one. I'm on my phone and am too lazy to find one for you.
After that just flash recovery, radio, and hboot like ezterrys thread says.
fastboot flash hboot hboot.img (1.33.0013 or 1.33.0013d hboot)
fastboot flash radio radio.img ( 2.22.27.08 or 2.22.28.25)
fastboot flash recovery recovery.img
fastboot reboot-bootloader
I'm pretty sure those commands are right, but they are from memory and could be spelled wrong or be in the wrong order.
Click to expand...
Click to collapse
I did flash sappimg using a gold card. Then i got the Vodaphone splash screen.
Then i flashed the myTouch 3g splash screen .
This is the tutorial that i followed.
http://theunlockr.com/2009/08/14/how-to-root-your-mytouch-3g/
How does one tell if they have the ENG SPL?
Do i have to do it again or can i just flash the hboot and radio and recovery?
Fastboot info
SAPPHIRE PVT 32B SHIP S-ON (original)
SAPPHIRE PVT 32B ENG S-OFF (after flashing sappimg with gold card)
djm3ph said:
I did flash sappimg using a gold card. Then i got the Vodaphone splash screen.
Then i flashed the myTouch 3g splash screen .
This is the tutorial that i followed.
http://theunlockr.com/2009/08/14/how-to-root-your-mytouch-3g/
How does one tell if they have the ENG SPL?
Do i have to do it again or can i just flash the hboot and radio and recovery?
Fastboot info
SAPPHIRE PVT 32B SHIP S-ON (original)
SAPPHIRE PVT 32B ENG S-OFF (after flashing sappimg with gold card)
Click to expand...
Click to collapse
You want Eng s-off
What radio and hoot do you have now?
SAPPHIRE PVT 32B ENG S-OFF
HBOOT-1.33.2005 (SAPP30000)
CPLD-10
RADIO-3.22.20.17
Apr 20 2009, 15:30:43
Good. Now just follow the steps on this thread: http://forum.xda-developers.com/showthread.php?t=831139
That thread is confusing . I will give it a shot this weekend and report back.
Sent via - HTC SENSATION.
Well i did everything you said and now it's running.
Thank you.!
got Boot loops, no matter what ROM I used. my phone got stuck on the green "MyTouch" image and restarts in circles,
i could access recovery and fastboot
htc sapphire 32b eng s-off
hboot-1.33.2010
radio_2.22.28.25
jun 2 2009,17:27:03
Flash the 1.33.0013 or 1.33.0013d spl. Most roms want that now
thank you so much my friend
i tried to restore my phone with SAPPIMG_Sapphire_TMUS_1.88.531.1_COC10_release_signed
after that i rooted it with flashrec-1.1.3-20091107-2
then i flashed this spl "update.Engineering-SPL-HBOOT-1.33.2010-signed"
and flashed Gios_OTA_Froyo-2.0 ROM
it work like charm
but when i started another ROM it stuck again in boot loop
so my friend did you think it will need the spl you told me about "1.33.0013"to get out of boot loop and i think i'll flash the engineering one wright?
i tried to download 1.33.0013 but no luck could you send me the link?
thank you again for your help!
this is the only link i found about 1.33.0013
it's dead i hope you could point me out for a download link to this spl,
Thanks!
okay it's done
hboot-1.33.0013d
radio-2.22.27.08
tried to flash this rom signed_update-cm-7.1.0-RC2-DS still boot loop
Try flashing a kernel on top of the rom. Try ezterrys ezgb kernel
Hi,
i couldn't describe how much i appreciated your help,
yesterday i download SPL 1.33.0013d and radio-2.22.27.08
https :// rs655dt.rapidshare. com /files/429271074/dream_2708kit.zip
"remove spaces to download the files"
then flashed it with fastboot
fastboot flash recovery recovery-RA-dream-v1.7.0-cyan.img
fastboot flash radio radio-2.22.27.08.img
fastboot flash hboot hboot-1.33.0013d.img
fastboot reboot-bootloader
fastboot erase system -w
fastboot erase boot
after that any rom work great
i tried Ginger yoshi, it worked fine, then i tried cyanogenmod 7 unfortunately it didn't configure the WiFi setting probably he didn't recognize the mac address, so i'll work with Ginger yosh for now,
Thank you again my friend!
I tried to but a full steps instructions to help any one have the same problem.