Related
Hey all,
I got the July 27 leaked Froyo and went ahead and rooted to 2.2.
I have noticed a pretty serious buggy issue regarding the phone not detecting a 3G network so when I'm away from my wireless router, it only shows bars, no 1X or 3G.
I have two options at this point, one of which has done me no good. Perhaps someone can help me.
Option 1: Downgrade back to Android 2.1. (More on this later)
Option 2: Try and find a way to keep this version and get back on 3G.
Lemme explain: I tried placing the PB31IMG.zip on the SD card and going through recovery to return the phone to stock. Each time I attempted this, it told me the version was old and it failed. Is there a workaround on this or do I need to find a different stock ROM?
I used unrEVOked to root the phone and have not been trying to do any frivolous additions or subtractions. I just wanna be back on my 3G. Any and all help would be HIGHLY appreciated.
Thanks!
Did you try *228 and update your PRL?
Yes. It did not help.
Always have 3G coverage where I'm at too. So more than likely phone is issue unless a tower around here is down (which I highly doubt).
Toggle Airplane Mode on, then off.
JC
Sadly, toggling airplane mode has done nothing to help either.
Upgrade to the 8/1 version...see if that helps.
JC
Try shutting the phone off, then powering back on. Or possibly that combined with an airplane mode toggle. Also make sure your mobile network is on in the settings for wireless networks. This problem was common with the first leak. I have not had it happen since switching to the second leak of 2.2.
Considering the missing apps and media in the 8/1 Leak would it be ok to do Sky Raider or should I just try the 8/1 Leak done by aiccucs?
ContraMan said:
Considering the missing apps and media in the 8/1 Leak would it be ok to do Sky Raider or should I just try the 8/1 Leak done by aiccucs?
Click to expand...
Click to collapse
I believe mrozzeh also gave a link to the full version of the 8/1 leak, if you are concerned about missing apps/media...
Doing that update has not helped me.
I guess I'll have to go down to 2.1 again. However, as I said, it won't load the PB31IMG.zip. It says the file is old. Any ideas?
Stupid question....you did upgrade the radio right?
Yes. Radio is the 2.x baseband.
I would be VERY finicky to update that again as I do NOT want to brick my phone.
Ok, it seems I have found a bit of the issue that is causing it. My phone number and IMSI are not detected as my current phone number. Is there a way to program this or is it an issue where I'll have to have it reprogrammed by the local Verizon rep?
ContraMan said:
Ok, it seems I have found a bit of the issue that is causing it. My phone number and IMSI are not detected as my current phone number. Is there a way to program this or is it an issue where I'll have to have it reprogrammed by the local Verizon rep?
Click to expand...
Click to collapse
try a *228 and option 1 so the phone is reprogrammed. then do a test call to your vm(*86) and make sure it connects, you should not see the 3G symbol, when you end the call, the 3G should be displayed...give it a whirl
This did not work. There has to be a way to program the phone number into the phone. Any ideas?
i've been having this same issue... messing with airplane mode and rebooting a few times got it to fix... *228 and option 2 worked sometimes. just loaded up Adryns new evo hybrid rom, working fine so far (the problem was rare, maybe twice a day tops) and did *228 1, we shall see!
To no avail on these. I think I'm going to have to see a rep tomorrow and see if we can get the phone number (my actual phone number) programmed back into the phone. I think that's a VZW thing as I'm sure they won't run me through the methods to program a phone number.
I hate that I have to go back to Big Red over this, but it is important for me to have this phone up and running. Besides internet, I have NO other form of contact.
3g issue
I had the same problem and so have many others, I flashed Skyraider Rom and problem is gone so we know its not a buggy radio, I don't think there is a fix right now, but I've never seen a Rom so stable as the new Skyraider, so you might wanna think about flashing that Rom.
Coincidence. I've heard the same with my roms, from both ends of the spectrum. Its for sure a buggy radio, and how it interacts with Froyo. Once we get a 100% Froyo ready radio, I doubt we will ever hear about the issue again.
This is the first I've heard of someone not being able to get the 3G connection back at all. Is that what you are describing? I had it not turn on, then come back after a *228/2 or power cycle - but it always came back on. Just curious but are you on an Alltel plan by chance?
Can you make calls Contra? Did you pay your phone bill?? Are you wiping all data before flashing? Try the full second leak that they added to that post. I've been using it and haven't had the 3G drop in two days now. I just took that rom and removed a handful of apps I would never use. It's working quite well.
So my girlfriend's Nexus S has been losing the entire voice and data network and going into no service mode, no biggie at first, just cycle airplane mode, then it went on to rebooting because you would select airplane mode from the power off menu but it would not check the box in the wireless settings menu.
After the reboot the box would show checked and airplane mode could be disabled and the service would resume. The the phone started getting stuck in airplane mode and not even rebooting it would bring it out the first few times, then it got to the point of resetting the phone, a wipe cache/data reset didn't fixed it. So off to T-Mobile for a new sim card. Rebooted the network immediately. And as of last night its back in full force and now not even a new sim will resurrect the network.
Have tried wiping, reflashing stock 2.3.3, new sim again, multiple resets, had to get an toggle widget to get it out of airplane mode and still a dead network, all this time the network in the *#*#4636#*#* menu showing unknown and is not able to be changed and reverts back to unknown immediately, OEM specifics settings button is greyed out and you are not able to disable the radio either.
While I'm going to call Samsung on Monday and I guess send the phone off, I worry about mine because it too does it but only once a month or so, but I do constantly have issues resurrecting the phone from airplane mode at times because the box will not be checked in the wireless settings menu but I can see the airplane instead of network bars, problem persists with reboots sometimes.
I also would like to add that even when the box is not checked in the wireless settings menu for airplane mode, if you click it it just hangs forever and will try to select but never will and stays grey like its turning everything off, but if the scren goes off its like you never tried.
Has anyone else seen this? I have seen a lot of people with data network issues or having to reboot to get voice network back but nothing as bad as I'm experiencing.
Both our phones are and have been completely stock and unmodified.
Thankfully we still have her Vibrant and in case I need to send mine in my Nexus One.
Sent from my Xoom using XDA App
Have you tried restoring from another persons' pre-made nandroid backup?
This over-writes the radio firmware, you should give it a go!
I also found that I had problems on 2.3.3, however reverting to 2.3.2 gave me no problems!
Just contact me if you need any help restoring from a nandroid backup or finding the 2.3.2 backup files
cdaly985 said:
Have you tried restoring from another persons' pre-made nandroid backup?
This over-writes the radio firmware, you should give it a go!
I also found that I had problems on 2.3.3, however reverting to 2.3.2 gave me no problems!
Just contact me if you need any help restoring from a nandroid backup or finding the 2.3.2 backup files
Click to expand...
Click to collapse
Is that true? I am just on the verge of calling samsung. My phone won't connect to or display any available networks, and is pretty much now dumbed down to a small tablet. I've tried everything except another persons nandroid backup. I've been told to stay away from flashing another persons... but I'm really desperate.
If you could provide me with a backup, that would be awesome.
I'm having identical problem.
It was working fine yesterday, look back to it and now it's got no mobile network, nothing. Just the no bars and cross symbol. I've tried wiping dalvik cache, reflashing the radio, wiping data/factory reset, reflashing the rom, restoring with a backup (Backup of when I first rooted the phone) and still no signal. Nothing has worked..
Anyone got ideas on how to fix this issue?
Gawthorne said:
I'm having identical problem.
It was working fine yesterday, look back to it and now it's got no mobile network, nothing. Just the no bars and cross symbol. I've tried wiping dalvik cache, reflashing the radio, wiping data/factory reset, reflashing the rom, restoring with a backup (Backup of when I first rooted the phone) and still no signal. Nothing has worked..
Anyone got ideas on how to fix this issue?
Click to expand...
Click to collapse
Can you search for and view available networks?
This sounds like the CM7 powerwidget problem (3g/2g) I used it and I loss all network, phone process will crash every second, however if your phones are stock I can't think in anything causing it.
For CM7 you'll have to reflash and delete userdata or edit the sql database for the providers and change a value to 0, but you need root.
When I went to *#*4636.... my preferred service was "unknown" too, but now it is OK.
Try to dail:
*#*#4636#*#*
and find your network information.
ketchup539 said:
Can you search for and view available networks?
Click to expand...
Click to collapse
Nope. Sits their 'searching' but nothing shows up.
In, *#*#4636#*#*, it gives little to no information. Just says nothing for current network and for GSM disconnects it has,
Sate: DvInactiveState
disconnected with last try
at 9:59AM
fail because No Error
And that time never changes, stays at 9:59AM.
As my above post suggested, I've tried doing a factory reset and reflashing. I don't think I use CM.. I flashed with Oxygen 2.1.6 (using it's kernel) but I restored to Oxygen rom and trinity kernel after it didn't work.
Gawthorne said:
Nope. Sits their 'searching' but nothing shows up.
In, *#*#4636#*#*, it gives little to no information. Just says nothing for current network and for GSM disconnects it has,
Sate: DvInactiveState
disconnected with last try
at 9:59AM
fail because No Error
And that time never changes, stays at 9:59AM.
As my above post suggested, I've tried doing a factory reset and reflashing. I don't think I use CM.. I flashed with Oxygen 2.1.6 (using it's kernel) but I restored to Oxygen rom and trinity kernel after it didn't work.
Click to expand...
Click to collapse
That is the EXACT same problem I have. I too was using Oxygen 2.1.6 and lost all connectivity. I've just locked my bootloader and flashed back to stock ready to send for repairs. That rom must be doing something >.>
Oh no
I didn't want to send it back D:
Anyone got some suggestions that I haven't tried?
Gawthorne said:
Oh no
I didn't want to send it back D:
Anyone got some suggestions that I haven't tried?
Click to expand...
Click to collapse
I've been trying *everything* for last past few days. Nothing is working. That shouldn't stop you from trying though. Just stay well away from ODIN and those i9023 files, I've seen bad things.
ketchup539 said:
I've been trying *everything* for last past few days. Nothing is working. That shouldn't stop you from trying though. Just stay well away from ODIN and those i9023 files, I've seen bad things.
Click to expand...
Click to collapse
Cheers, going to a mates place soon to see if he has anything up his sleeves to try and fix this annoying issue..
If we somehow fix it, I'll be sure to post how we did here.
Gawthorne said:
Cheers, going to a mates place soon to see if he has anything up his sleeves to try and fix this annoying issue..
If we somehow fix it, I'll be sure to post how we did here.
Click to expand...
Click to collapse
Ok, it'd be great if you worked something out. I'm so glad i'm not the only person with this issue!
Anyone had any breakthroughs? *hopeful*
I wouldn't call it a breakthrough but I got somewhere!
Ended up putting a extremely thin piece of wire into the external antenna port at the back of the phone. Wasn't too keen on doing this, but my phone now has reception isn't stuck at the dreaded -113dbm.
The reception isn't good, but it's enough to send texts and have calls.
Although the area needs quite good reception for me to receive anything, and it's extremely sensitive. To get 3 bars in a place where I usually get full bars, I have to be outside. While inside it's reduced to none or 1 bar, which is enough to send/receive texts and a sort of lagging phone call (did a few tests). As mentioned before extremely sensitive. The phone seems to like it better when it's up-right. In the middle of the CBD at Brisbane I get full reception and 3G, which is fine but in the places where you usually get 2 bars, you get no signal at all, unless you're outside.
So this is hardly a fix. I will most likely be sending it to Samsung to get it actually fixed. Either that or get it fixed the same day and pay probably close to $100 so I don't have to wait 2 months waiting for Samsung to twiddle their thumbs.
Thats awesome! But I'm going to post mine off to Samsung USA tomorrow, which will take forever considering international shipping. Where could you get it fixed same-day? I'm going to try this wire thing
So it can't be a software issue, but maybe the rom overloaded the antenna and fried it or something? I'm glad we've got that far.
I've seen that nexus s has a problem like the iphone, the antenna gate. Try take the phone with the left hand looking to no touch the rear of the softkeys
Inviato dal mio Nexus S usando Tapatalk
RcrdBrt said:
I've seen that nexus s has a problem like the iphone, the antenna gate. Try take the phone with the left hand looking to no touch the rear of the softkeys
Inviato dal mio Nexus S usando Tapatalk
Click to expand...
Click to collapse
Its more serious than that my friend! Thanks anyway
I got a quote from a place in Brissy called "FixMyMobile" and they said if they can fix it, it will cost $99. Although I'll get quotes from different places (if I find them) and see what they charge however I don't think I will be able to get cheaper, most likely around the same price..
So I may do that to not wait the ridiculous time it will take to get it back from Samsung.. Not sure on places in NZ though.
Yeah it seems like a hardware issue definitely. I eventually reverted the phone back to stock everything and it still happened, so that there shouts hardware issue.
HI ALL, Im pretty new here. after so many tries finally i was able to install cm7.1 on my defy. but im facing some issues. before the installation i forgot to take a back up of the existing ROM so if i have to go back to the previous ROM how to do that? and also there is no network coverage after the installation. please please anybody help!!!!!!
Have a vibrant myself but I'm helping a buddy get cm7 on his defy and after flashing didn't have a network signal. I looked at the cm7 install guide and it referenced a defy base band switcher app for better coverage. Had him try that and he got his data connection back. Might want to look into it or read the guide.
Sent from my SGH-T959 using Tapatalk
hilsa1987 said:
HI ALL, Im pretty new here. after so many tries finally i was able to install cm7.1 on my defy. but im facing some issues. before the installation i forgot to take a back up of the existing ROM so if i have to go back to the previous ROM how to do that? and also there is no network coverage after the installation. please please anybody help!!!!!!
Click to expand...
Click to collapse
If your previous ROM was stock that came with your phone, flash the corresponding SBF file from the sticky on the Dev section to go back to stock. If it was some other custom ROM, wipe data/factory reset in CWM and flash the old ROM. Make backup of your apps using Titanium Backup if you want.
For CM7 network issues, choose the correct baseband from Defy Baseband Switcher. For India, pick anything that is 900/2100MHz...
Also, make sure you have read as many guides and First Posts on important threads as you can. Here is a collection of good threads you can read for these questions, and more that you might get later:
http://forum.xda-developers.com/showthread.php?t=966537
http://forum.xda-developers.com/showthread.php?t=1033654
http://forum.xda-developers.com/showthread.php?t=1065798
http://forum.xda-developers.com/showthread.php?t=1216982
http://forum.xda-developers.com/showthread.php?t=1450026
Hello! Noob here as well.
I installed CM7.1 stable on my Defy (running 2.2.2 foryo) 2 days ago.
All went well, except that network connection is lost after a couple of minutes after boot. Sometimes it takes an hour or two but I still end up with no connection.
I've googled everything about it in the last days. I played with the Baseband Switcher and although most options in the BB Switcher work right after a reboot, it still looses the signal after a couple of minutes.
One thing I noticed, when the signal is lost, trying to set the "Airplane mode" will fail. If trying to set Airplane ON - the notification icon will not replace the signal icon and will also be unable to set Airplane OFF (since it didn't finish turning ON).
I also noticed that if I force stop the "Dialer" system app, then the Airplane notification ico shows up, but still there's no way to turn it OFF (it's disabled in the menu). After a reboot Airplane can be set OFF and everything works for another small period of time (..until baseband crashes again?).
Hope it makes some sense. I'm quite sure this is not an operator issue or hardware related, since my Defy worked just fine before CM7.1
Also, I am located in Romania, operator is Orange.
ZeDevil said:
Hello! Noob here as well.
I installed CM7.1 stable on my Defy (running 2.2.2 foryo) 2 days ago.
All went well, except that network connection is lost after a couple of minutes after boot. Sometimes it takes an hour or two but I still end up with no connection.
I've googled everything about it in the last days. I played with the Baseband Switcher and although most options in the BB Switcher work right after a reboot, it still looses the signal after a couple of minutes.
One thing I noticed, when the signal is lost, trying to set the "Airplane mode" will fail. If trying to set Airplane ON - the notification icon will not replace the signal icon and will also be unable to set Airplane OFF (since it didn't finish turning ON).
Click to expand...
Click to collapse
I have the same issue, except that it is much rarer (ranging from every other day, to even a month between such incidents). It can also be triggered sometimes when I turn off Wi-Fi and the device tries to regain mobile data connection (not sure if it matters, but I set the network mode to 2G on my phone). The battery drain is increased if this occurs without the user noticing - the phone seems to search in vain for the signal.
Using the latest SEA baseband on M1 (Singapore).
kaninabu said:
I have the same issue, except that it is much rarer (ranging from every other day, to even a month between such incidents). It can also be triggered sometimes when I turn off Wi-Fi and the device tries to regain mobile data connection (not sure if it matters, but I set the network mode to 2G on my phone). The battery drain is increased if this occurs without the user noticing - the phone seems to search in vain for the signal.
Using the latest SEA baseband on M1 (Singapore).
Click to expand...
Click to collapse
I get this problem too. Happens every so often when I'm at work. I've always put it down to a bad signal where I work but as I always turn the wifi of before leaving home it could be down to that. If anyone has any solutions it would be great
Ok, a little update on this:
At the office now, further playing with the Baseband Switcher, I ended up selecting "Italia RT 2.51.1" which has the same 900/2100 freq that my operator requires and it seems to work. Even getting 3G.
If "2.51.1" is some sort of protocol version, then all the other options I've tried were either 4.x or 3.x or even 2.21.x ..and none of them worked for more then 30 minutes.
Also, not sure if signal strength has something to do with this because I did a test, going to the basement of my office in order to loose signal, then back up and it worked - got the signal back, without reboot or anything.
Also, I would really appreciate if someone could explain in a few words what those version numbers mean (ex: "Italia RT 2.51.1"), as I know nothing about gsm bands and protocols.
UPDATE: Back home, lost signal again, after a whole day without any problems. Funny.
UPDATE 2:
So after much google searching and trying literally every option in the Baseband Switcher, I switched my SIM card with a friend's SIM and guess what.. IT WORKED! Even more, when I inserted my original SIM into the other phone after a few minutes it lost signal, too! It was a faulty SIM, that has just started to "die".
Conclusion:
- Keep playing with that Baseband Switcher until you get something that works for you.
-Make sure your SIM is working properly in other phones, otherwise ask your operator to replace it.
Thanks and hope this helps.
ZeDevil did you try using other Basebands to see if you get better battery life ?
cknro said:
ZeDevil did you try using other Basebands to see if you get better battery life ?
Click to expand...
Click to collapse
Not really. As long as you have a working Baseband selected (with correct frequencies) I don't think it matters.
But overall CM7.1 has better battery efficiency then stock ROMs, or at least that's what I felt.
update:
Well, I had a play with the baseband switcher, realising i was on 'international'. I switched to uk t-mobile and from there it seemed to work much better. A slight blip at work today (think it's a bit of a signal black-spot though) but restarted and it seems fine again. I've also just realised it's gone 37hrs since its last charge too
Strangely my other problem, the backlighting on the soft-keys not working, fixed itself at the same time. dunno if these two things are linked or not?
i use the CEE one.
I'm having a problem with my N900W8 since doing the Kitkat upgrade.
On Jellybean, I can be in a building, unable to get LTE, but have strong 3G/HSPA+ connection and it works great.
Ever since upgrading to Kitkat though, while LTE continues to work great, if not faster in my speed tests, when on 3G/HSPA+, after a short while, the data connection seems to freeze. I'll see it drop from H+ to 3G in the menu bar, and just merely a flashing up arrow, and nothing else. It never seems to fix itself, and I just have to put the device to sleep by tapping the power button. Within a minute it regains a good data connection again for maybe another 2 minutes. This is constant.
I'm at a loss, it's a new phone and only had it for 2 months. It's not rooted or anything like that, just unlocked by the distributor, and on T-Mobile (if that matters).
It's getting annoying because it makes using my data connection completely unusable. Samsung techs were actually quite helpless, they wanted me to send in my phone, but it seems to be software related because it worked fine on Jelly bean. It literally happened RIGHT away after the kitkat upgrade.
Please someone help? I already have checked, double checked, triple checked the APN settings, even deleting them and starting over, and trying both fast and epc APN's on T-Mobile.
I reset the device back to factory, and all was well. And I noticed that it started happening again after running the speedtest.net app on the 3G.. It seems to start doing it again when I run that app, and when I "cleared" all the app cache, the problem seemed to go away. Not sure then what's going on there.
So I have a Huawei p8 gra-L09 with Huawei P8 [ROM][6.0] fRomFuture - Home that I installed a couple of months ago. Everything has worked perfectly up until recently when my phone does not find any 3g networks, only 4g. When I try to make a call it's stuck on 4g. I don't even know if my phone is the problem or if it's my carrier. I tried to call them, they said they "made the network better".... But the problem came back after 1-3 days again.
Can I solve this somehow? My phone is also rooted but that doesn't really matter I guess..
Check the fRomFuture thread, another guy in that thread has the same issue..
did you managed to get the issue resolved?
Well, nope. Turning of 4g sort of fixes the problem I think. The connection drops sometimes but most of the time it works. Also I changed to stock b392 because I could not turn off 4g in the build that was used in fromfuture - home for some reason. It automatically turned it on just after chabging to only 3g/2g.
Still doesn't work as intended though and I am 99.9% sure it is not because I don't know how to flash. Used adb and fastboot and unlocked bootloaders and whatever on so many phones since my first smartphone (htc wildfire).
Are you by any chance Swedish or scandinavian? Could it be that it is not compatible with the networks in some countries or something?
melonsmasher100 said:
Well, nope. Turning of 4g sort of fixes the problem I think. The connection drops sometimes but most of the time it works. Also I changed to stock b392 because I could not turn off 4g in the build that was used in fromfuture - home for some reason. It automatically turned it on just after chabging to only 3g/2g.
Still doesn't work as intended though and I am 99.9% sure it is not because I don't know how to flash. Used adb and fastboot and unlocked bootloaders and whatever on so many phones since my first smartphone (htc wildfire).
Are you by any chance Swedish or scandinavian? Could it be that it is not compatible with the networks in some countries or something?
Click to expand...
Click to collapse
No i am in UK; i bleive the single sim version supports all the bands, at least here in UK; it is a phone i just bought off ebay and i can return it but I wanted to be sure it wasn't something that could not easily be fixed before doing so.
Hi again. I have sort of figured something more out about the problem. This morning 3G did not want to work again. So I googled, and googled and googled. Tried everything basically. Then I noticed that my APN settings are not what they were last time I set them(???). So I went into my carriers website. Set the correct apn values and removed any unnecessary values that did not seem to affect anything. Then it immediately worked again. Now I have no idea how phones sets the default settings but it seems like they are wrong? Maybe this was just random that it started working after applying the correct settings again. No idea, going to see if it works all day or if it randomly stops working as earlier.
Edit: 5 hours later still works and the connection hasnt stopped randomly.
Ok so it has worked for 13 hours. It's actually weird if the APN settings for 4g broke the 3g connection sometimes randomly throughout the day, right? I don't know how apn settings really work but I remember setting a port number and also changed the name of the APN so that I can be sure it does not change to something else.
ugh, I give up. Now it stopped working again since yesterday. It feels like it's my carrier but so many people have this problem so I guess it's something else..
Nevermind I don't give up. I found a solution . When 3g/calls stop working the phone usually gets really, really hot. So putting it in the freezer for a couple of minutes actually fixes the problem for me, atleast until the phone gets really hot again. I have tried it four times now and every time it has worked.