Tried lots of stuff with to get proxy browsing on my 2.1 x8 with no luck (Firefox, asproxy and opera about:config proxy settings).
I'm thinking of flashing my x8 to another rom, but I don't like the idea of battery drainage or random reboots.
I really don't care about apps/games I get with 2.2/2.3, I just want proxy support. Is there's such a thing as a 2.1 rom modified with ipfilter support?
Also, is NTLM authorization is still broken on 2.2 and 2.3 roms?
Bump. Does the MiniCM ROM even support proxies?
I really want a solution to this issue. My x8 can work as a paper holder at most without proxy support.
Try miniCm. It's got almost all the problems solved, Unwanted reboots are VERY rare and it's Much faster than Stock rom. I think it does support proxy.. Ask on MiniCM thread, and you'll get your answer for sure ^_^
I can not ask on MiniCM thread I need at least 10 post D:
Does MiniCM has iptables/netfilter support?
And is NTLM authorization still broken?
andrestander said:
I can not ask on MiniCM thread I need at least 10 post D:
Does MiniCM has iptables/netfilter support?
And is NTLM authorization still broken?
Click to expand...
Click to collapse
your best bet would to be back-up the firmware you using now in x-recovery. trying out the Minicm rom. If you don't like the Minicm then you can switch back. That way all the questions you have can be answered for sure by yourself
andrestander said:
I can not ask on MiniCM thread I need at least 10 post D:
Does MiniCM has iptables/netfilter support?
And is NTLM authorization still broken?
Click to expand...
Click to collapse
1. No
2. No idea
btw, I have opera working with proxies. Why can't you do that?
andrestander said:
I can not ask on MiniCM thread I need at least 10 post D:
Does MiniCM has iptables/netfilter support?
And is NTLM authorization still broken?
Click to expand...
Click to collapse
I use MiniCM heavily. deafult email program handles my Gmail, Yahoo and Company Exchange mail.
Yes, Proxy also works Settings>>Wireless>>Proxy
Related
Hi,
I've used Juicy's ROMs (v1.08) and MSR 1.1 and both of them do not permit SSH input.
I've tried both pocketputty and Pragma VT, and nothing works. I can't pass any ls or any command after logging in (Pragma VT passes username and password through application, so that atleast let's me log in).
I think this is an underlying problem and not a ROM issue, can someone please help me figure this out?
Thanks!
---
Solution:
Thanks to jxent for pointing me in the right direction.
Basically, it's not the software's fault or any ROM's fault. What matters is the input type you use.
Full qwerty and compact qwerty just don't work on here. The trick is to use the "keyboard" input method and then you're golden.
Good luck, and thanks for everyone else who banged their head for me, including but not limited to Juicy, Mightymike, Juggalo_X and others.
I'm using the GFTC kitchen from ppcgeeks, and ssh with putty works fine. I'm using the stock kitchen with a couple apps added and some preset phone settings.
jyxent said:
I'm using the GFTC kitchen from ppcgeeks, and ssh with putty works fine. I'm using the stock kitchen with a couple apps added and some preset phone settings.
Click to expand...
Click to collapse
Weird, cuz both the ROMS I've used are off the GFTC kitchen.
I've again tried with pocketputty, to nogo. Currently using MSR 1.1.
Devileyez, can you try my 2.4.1 ROM when it goes up tonight?
I want to know if the issue is resolved.
Why do you need SSH input btw?
Regards,
Carty..
Carty said:
Why do you need SSH input btw?
Regards,
Carty..
Click to expand...
Click to collapse
Why do you need browser input btw?
Juicy47 said:
Devileyez, can you try my 2.4.1 ROM when it goes up tonight?
I want to know if the issue is resolved.
Click to expand...
Click to collapse
I'll try it out over the weekend and let you know.
I'm a telus diamond owner and have used pocketputty on the stock ROM, as well as several versions of Juicy (I'm currently on 2.2). It has always worked for me, using both password and private/public key authentication.
*However*, I've noticed that it typically takes over 90 seconds to reach the login prompt. For whatever reason, I can lower that time to about 15 seconds if I repeatedly bang on the enter key after pressing "Open".
In answer to Carty's question, I use it to securely tunnel remote desktop connections.
biclops said:
I'm a telus diamond owner and have used pocketputty on the stock ROM, as well as several versions of Juicy (I'm currently on 2.2). It has always worked for me, using both password and private/public key authentication.
*However*, I've noticed that it typically takes over 90 seconds to reach the login prompt. For whatever reason, I can lower that time to about 15 seconds if I repeatedly bang on the enter key after pressing "Open".
In answer to Carty's question, I use it to securely tunnel remote desktop connections.
Click to expand...
Click to collapse
I don't know why you had to answer Carty's question. It was like a Grade 2 question. Besides, he's not asking why do you need ssh.. he's asking why do you need ssh input?
*sigh*
Devileyezz said:
I don't know why you had to answer Carty's question. It was like a Grade 2 question. Besides, he's not asking why do you need ssh.. he's asking why do you need ssh input?
*sigh*
Click to expand...
Click to collapse
I answered his question, as I understood it, because he asked. There's no point discussing that interpretation with you - if he wishes to clarify the question I'm sure he will. There is simply no need for elitist responses like yours. What if he *is* in grade 2?
You seem more concerned with this than my attempt to answer your own question. Did I help you at all in regard to your original problem?
biclops said:
You seem more concerned with this than my attempt to answer your own question. Did I help you at all in regard to your original problem?
Click to expand...
Click to collapse
Ofcourse. You actually helped pitch in with the others who said it works on Juicy 2.4*. So, I've decided to wait for a 2.* version that has no data speed problems and battery drain issues (like everyone on 2.4.1 seems to complain about) and I will flash that one.
Devileyezz said:
Ofcourse. You actually helped pitch in with the others who said it works on Juicy 2.4*. So, I've decided to wait for a 2.* version that has no data speed problems and battery drain issues (like everyone on 2.4.1 seems to complain about) and I will flash that one.
Click to expand...
Click to collapse
there are no battery drain issues or speed problems on 2.4.1
I mentioned I had some issues with speed, but I was playing around with PRL, and a hard reset fixed it.
Well, Juicy's 2.5 don't fix it and neither does MSR1.2. Gonna try GFTC Kitchen 1.04 now.
SSH using Pragma VT or PocketPutty doesn't work. I'm able to login via PragmaVT because, as stated before, it passes login credentials from the program itself.
Make that GFTC 1.05 ROM.
Ok, nope. Doesn't work anywhere.
The only place left to try is TELUS stock ROM. This is the weirdest thing ever.
Solution posted on first post.
Thanks for all the help!
hi all! does any1 know if there is a aim application, not web base like meepo, for the xperia?!?!?
any information or links give will be greatly appreciated!!!!
THANKS!!
ugotproblemz said:
hi all! does any1 know if there is a aim application, not web base like meepo, for the xperia?!?!?
any information or links give will be greatly appreciated!!!!
THANKS!!
Click to expand...
Click to collapse
yeah there is. just go to aim.com or go to google and search aim for windows mobile. its a nice app. i use it siometimes.
ugotproblemz said:
hi all! does any1 know if there is a aim application, not web base like meepo, for the xperia?!?!?
any information or links give will be greatly appreciated!!!!
THANKS!!
Click to expand...
Click to collapse
here u go, enjoy
I use Fring, which has AIM/YM/MSN/VOIP, etc etc etc included in 1.
Also allows for file transfers, which I use quite a bit.
i use IM+ but there are other apps out there as well
I use palringo. I find that AIM's client is slow and it crashes after using it for a while.
never had any crashes with aim, it works well with me everyday, no custom rom just the latest SEUS update
i tried AIM's official program before... horribly laggy. But that was with R1A. Maybe the R2A firmware performs better with it?
spikegotti said:
here u go, enjoy
Click to expand...
Click to collapse
thanks for ur cab.
i installed this application and that went well.
after i input my screen name and password and press sign in, it was on the
loading screen for about 3 minutes. then a error pop up
saying "AIM server error: 12007" do you know waht that is?
thanks alot
not sure what that is dude, check ur connection settings and restart the app. good luck
I use beejive for aim ... the interface is nice and lte
I use palringo for the rest.
spikegotti said:
not sure what that is dude, check ur connection settings and restart the app. good luck
Click to expand...
Click to collapse
hmm i soft reset my phone and ran the application with wifi and it worked nicely!!
but now im trying to logg on using edge and its still connection...
if i may ask...wat data connection are u using??
and again, Thanks alot for sharing this!
my location is barbados, i am using digicel as my carrier with an unlimited high-speed data plan, it only takes a few seconds for me to connect, i guess its the speed u are connecting with, maybe your edge is slow, i had the same probs with our edge connection as well before i made the switch. when i connect via active sync, the speeds are practically the same as my unlimited data plan which is nearly 1mbps.
Mobile AIM is terrible. I tried to use it, but it is way to laggy. Use BeeJive, it is by far the best I've tried. Very slick, very clean, and very fast interface...plus its free! In terms of its fluid interface, you could be using the iPhone.
http://www.beejive.com/download/winmo/
hmm i see, guess my connection sucks.. thanks for the info.
imma try the beejive version and see...
i dont know why i am the only person who experienced no problems with the mobile aim, the only prob i have with mobile aim is that it wont allow you to change your display pic
Has anybody reached to any solution regarding proxy authenicated on wildfire..cause its getting really frustrating..non smartphone lg phones can do it too..
maybe it will be included in any custom rom?
yes, i really hope there will be proxy on a futur rom ^^
wildpuzzle beta have proxy support. will be included in next public release
yaaay ,thanks danne_jo ,but a couple of questions
is it authenticated?
where to get the beta?
is the beta usable as the older public releases?
thank youwould be awesome if i get proxy like all other phones
i can wait for public release though not a problem
tanzer1234 said:
yaaay ,thanks danne_jo ,but a couple of questions
is it authenticated?
where to get the beta?
is the beta usable as the older public releases?
thank youwould be awesome if i get proxy like all other phones
i can wait for public release though not a problem
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=8650135&postcount=2998
please get back and tell me if proxy works or not.
will try it and tell you.but tommorow as i dont have access to this authenticated proxy today. thnx
is it authenticated support though?
i've tried transproxy 3.02 previously however without setting up any iptables or anything else..but didnt work ..dont know if 3.05 will work or if you did something extra.
Authenticated proxy didnt work with me .i tried the transproxy 3.05 in beta but the browser displays nothing
transproxy work on wildfire with basic authentication, but not with NTLM authentication. test it on my WildFire.
can be found here in desire forum: http://forum.xda-developers.com/showthread.php?t=766569
thanks for daveba
Thanks for the explanation.Not ure if mine is NTLM but probably is..Is there ever gonna be NTLM support.Iphones work on my network btw do they supprt ntlm?
Hi Friend,
I have installed several android ROM in my HTC HD2 but its never work
I have the Data Contract, but does not work even when
configure.
Please if anyone knows what i have to do.
Thanks & Regards
edwinc60
edwinc60 said:
Hi Friend,
I have installed several android ROM in my HTC HD2 but its never work
I have the Data Contract, but does not work even when
configure.
Please if anyone knows what i have to do.
Thanks & Regards
edwinc60
Click to expand...
Click to collapse
Your going to have to provide more information and be more specific than that.
edwinc60 said:
I have the Data Contract, but does not work even when
configure.
Click to expand...
Click to collapse
Could you please tell me what you wanted to say with this sentence? I really don't get it
And as said above, tell us your radio, rom, build and kernel.
I'm having a the same issues with data my data connection as well.
RADIO= 2.12.
ROM= Energy ( latest & greatest)
AndroidAndroid 2.2 = froyyo V.3
I'm a noobee so take it easy
Sent from my HTC Desire using XDA App
Can you make a phone call? If you can, but do not have an internet connection for email, etc., you will have to manually input your APN settings. I got mine from the Froyostone thread. Probably listed several other places as well.
I have phone capabilities and I everything else seems to work fine however, just no data.
Sent from my HTC Desire using XDA App
Hi! My problem is that i use the 2.1 stock rom, and i have the x8 gesture module installed but it wont work with the stock browser and not even with dolphin browser. I checked the module and it works fine with opera for example but i dont like opera so i'd rather use dolphin. Is there any solution for this?
I thought that it's maybe because the browser knows that my phone is an x8 and that it doesnt have multitouch, so i thought maybe i could edit the phone model data in build.prop and change it to a similar model like xperia mini. But i don't want to brick my phone so first i want to be sure that it's possible.
So please tell me if you know anything about this problem! Thanks and sorry for my english...
szaberto said:
Hi! My problem is that i use the 2.1 stock rom, and i have the x8 gesture module installed but it wont work with the stock browser and not even with dolphin browser. I checked the module and it works fine with opera for example but i dont like opera so i'd rather use dolphin. Is there any solution for this?
I thought that it's maybe because the browser knows that my phone is an x8 and that it doesnt have multitouch, so i thought maybe i could edit the phone model data in build.prop and change it to a similar model like xperia mini. But i don't want to brick my phone so first i want to be sure that it's possible.
So please tell me if you know anything about this problem! Thanks and sorry for my english...
Click to expand...
Click to collapse
First, find in Forum a thread called dual touch "for every app" or such. It enables for all apk the dual touch, except Photos.
Should work fine
There's a search button. Use it!
Sent from my X8 to your screen
thanks it worked! thanks a lot
You can use my ROM MV1 or MV2 it's based on 2.1! Click on in my signature!
............
elderduke said:
LOOOOL: your ROM? I guess Colossus should kik Ur B.t.t.
That's 2.1.1.C.0.0. Did you ask for permission?
Not to mention you'r sooooo confuzed:
"MV2- 18.5.2012
1. Synaptics Dual touch for Cypress touchpad added (AnDyX module)"
WTF???
Click to expand...
Click to collapse
Why to kick me?
Why you think i'm confuzed?
Why wtf?
My rom is more popular then your (http://forum.xda-developers.com/showthread.php?t=1378468) so please stop!
http://forum.xda-developers.com/showthread.php?t=1135965
Man you make me sad. Please read. That Rom is made BY RIEKEN YUKI .not by me. that's why is called "by rieken yuki".
Second. There is no such thing as "Synaptics Dual touch for Cypress touchpad added "
One is DX's work for synaptics digitizer, and second AnDyX's for Cypres digitizer.
Third: No way you can claim SE's factory ROM as yours. You should end these jokes and grow up. Responsibility is not a matter of age, you should know that...
1. I don't read who made rom i just read who publish it and see how it looks. If it's ugly or bad I don't read anything. Please stop,you started, come one man!
Grow up?
I'm growing up yes, I'm 15!:cyclops:
To have working cypress dual touch, all modules must be included(One is DX's work for synaptics digitizer, and second AnDyX's for Cypres digitizer)
It is okay to customize a stock rom and call it your ROM.
Case closed, and so is this thread