Hi,
I've used Juicy's ROMs (v1.08) and MSR 1.1 and both of them do not permit SSH input.
I've tried both pocketputty and Pragma VT, and nothing works. I can't pass any ls or any command after logging in (Pragma VT passes username and password through application, so that atleast let's me log in).
I think this is an underlying problem and not a ROM issue, can someone please help me figure this out?
Thanks!
---
Solution:
Thanks to jxent for pointing me in the right direction.
Basically, it's not the software's fault or any ROM's fault. What matters is the input type you use.
Full qwerty and compact qwerty just don't work on here. The trick is to use the "keyboard" input method and then you're golden.
Good luck, and thanks for everyone else who banged their head for me, including but not limited to Juicy, Mightymike, Juggalo_X and others.
I'm using the GFTC kitchen from ppcgeeks, and ssh with putty works fine. I'm using the stock kitchen with a couple apps added and some preset phone settings.
jyxent said:
I'm using the GFTC kitchen from ppcgeeks, and ssh with putty works fine. I'm using the stock kitchen with a couple apps added and some preset phone settings.
Click to expand...
Click to collapse
Weird, cuz both the ROMS I've used are off the GFTC kitchen.
I've again tried with pocketputty, to nogo. Currently using MSR 1.1.
Devileyez, can you try my 2.4.1 ROM when it goes up tonight?
I want to know if the issue is resolved.
Why do you need SSH input btw?
Regards,
Carty..
Carty said:
Why do you need SSH input btw?
Regards,
Carty..
Click to expand...
Click to collapse
Why do you need browser input btw?
Juicy47 said:
Devileyez, can you try my 2.4.1 ROM when it goes up tonight?
I want to know if the issue is resolved.
Click to expand...
Click to collapse
I'll try it out over the weekend and let you know.
I'm a telus diamond owner and have used pocketputty on the stock ROM, as well as several versions of Juicy (I'm currently on 2.2). It has always worked for me, using both password and private/public key authentication.
*However*, I've noticed that it typically takes over 90 seconds to reach the login prompt. For whatever reason, I can lower that time to about 15 seconds if I repeatedly bang on the enter key after pressing "Open".
In answer to Carty's question, I use it to securely tunnel remote desktop connections.
biclops said:
I'm a telus diamond owner and have used pocketputty on the stock ROM, as well as several versions of Juicy (I'm currently on 2.2). It has always worked for me, using both password and private/public key authentication.
*However*, I've noticed that it typically takes over 90 seconds to reach the login prompt. For whatever reason, I can lower that time to about 15 seconds if I repeatedly bang on the enter key after pressing "Open".
In answer to Carty's question, I use it to securely tunnel remote desktop connections.
Click to expand...
Click to collapse
I don't know why you had to answer Carty's question. It was like a Grade 2 question. Besides, he's not asking why do you need ssh.. he's asking why do you need ssh input?
*sigh*
Devileyezz said:
I don't know why you had to answer Carty's question. It was like a Grade 2 question. Besides, he's not asking why do you need ssh.. he's asking why do you need ssh input?
*sigh*
Click to expand...
Click to collapse
I answered his question, as I understood it, because he asked. There's no point discussing that interpretation with you - if he wishes to clarify the question I'm sure he will. There is simply no need for elitist responses like yours. What if he *is* in grade 2?
You seem more concerned with this than my attempt to answer your own question. Did I help you at all in regard to your original problem?
biclops said:
You seem more concerned with this than my attempt to answer your own question. Did I help you at all in regard to your original problem?
Click to expand...
Click to collapse
Ofcourse. You actually helped pitch in with the others who said it works on Juicy 2.4*. So, I've decided to wait for a 2.* version that has no data speed problems and battery drain issues (like everyone on 2.4.1 seems to complain about) and I will flash that one.
Devileyezz said:
Ofcourse. You actually helped pitch in with the others who said it works on Juicy 2.4*. So, I've decided to wait for a 2.* version that has no data speed problems and battery drain issues (like everyone on 2.4.1 seems to complain about) and I will flash that one.
Click to expand...
Click to collapse
there are no battery drain issues or speed problems on 2.4.1
I mentioned I had some issues with speed, but I was playing around with PRL, and a hard reset fixed it.
Well, Juicy's 2.5 don't fix it and neither does MSR1.2. Gonna try GFTC Kitchen 1.04 now.
SSH using Pragma VT or PocketPutty doesn't work. I'm able to login via PragmaVT because, as stated before, it passes login credentials from the program itself.
Make that GFTC 1.05 ROM.
Ok, nope. Doesn't work anywhere.
The only place left to try is TELUS stock ROM. This is the weirdest thing ever.
Solution posted on first post.
Thanks for all the help!
Related
Hello one and all.
I have been looking at this forum for about 1 week and i'm still none the wiser. This may be because I have no idea what im doing and I am a little worried about making rom changes as I have no experinace of this.
I have a 02 exec. Which i am happy with but its a bit slower than I thought it would be. The phone seams to mess around when answering.
I have booted it up as normal on the basic setting.
A few questions that I have :-
What is the best setting to boot up on basic or corperate with the code ?
What reg changes are critical to boost performance ?
Any Software that I should get for the Xda ?
VGA settings do I need to change them ? What effect does it have.
Any advise would be good. If it could be given in a format my 2 year old could understand that would be good for me.
Thank you in advance
You'll find a wealth of information on each of your questions by browsing & searching the posts already on this forum.
thanks moandal that's why I posted.
1 post says basic setup another say corporate. 1 post says hack this that and the other. another says not to.
I'm new to pocket pc.
these forums do not make it clear what is best.
example radio version 1.06 or 1.08 at least 3 posts on here saying each one is better than the other. I have no idea.
all I was asking for is some guidance as to which set up has worked best for people.
@CRJL you've one up on me mate - I did not even know this thing had two modes!!!
BTW, why is that? Someone mentioned somewhere a corporate password - how to enter this & why would I want it.
BTW CRJL, I agree with you, these little devices are very confusing, espcially because the front end software (WM5) is soooooooo labourious!
Andy
when you hard reset the thing. after all the rom stuff loads up it gives you the choice of basic set up or corporate. it selects basic automatically after 20secs.
if you tell it corporate then you have to put the code 0506 in. this the uninstalls some stuff off the exec. you loose mms and all the gprs an 3g settings for conecting to the net. (i don't know what else it does) some of the people in the forums say it makes the exec faster. I could not really notice any difference.
you loose a few applications as well.
until I learn more I'm staying in basic.
I find these forums are for more advanced users so the simple questions tend to get missed. (im talking abot my first post) still not had a reply answering my questions
CRJL said:
What is the best setting to boot up on basic or corperate with the code ?
Click to expand...
Click to collapse
for this you should first make a hard reset (carefull, with hard reset you will loose all data!) by pressing both app buttons and reset at the same time.
When it starts up, after the installation countdown shows up you should make a reset to stop the automatic setup.
Now you have a machine, which is only basic setup. See how you like the things in there.
After you now enough about this, you can make same hard reset again and start the corporate setup. Then see, how you like this setup.
After this do same with basic setup.
In total you have then an idea, what you can have with the 3 different setups.
Now you can decide, which of the 3 setups you want to start with. After this, you should read the posts about Extended Rom, how to unlock it, which programs are in there etc. Then you get an idea for example how to install some software in the basic setup.
Also, you can add some programs from other Roms. For example I have an MDA Pro and I added the I-Mate Backgammon game to my setup.
Try out and see what customizations you want and need, which you do not want.
CRJL said:
What reg changes are critical to boost performance ?
Click to expand...
Click to collapse
Basically, this does not really make difference. Forget about reg changes. Performance depends on running programs and setup - see above.
As far as I know, o2 installs some app in the basic setup, which makes the device slow. As I never tried o2 rom, I do not know, if this is true.
CRJL said:
Any Software that I should get for the Xda ?
Click to expand...
Click to collapse
read here:
http://forum.xda-developers.com/viewtopic.php?t=31697
here also I recommend to try out the software and just keep the ones you like.
In total I would recommend you to create a directory on your PC where you put all the setup and cab files, which you want to have in your final setup. After trying out all, make a hard reset again and install the files from this directory. This prevents any junks to be left behind from your previous tries.
CRJL said:
VGA settings do I need to change them ? What effect does it have.
Click to expand...
Click to collapse
I think, you get more problems than it helps. Some programs appear too small on the screen. And when you make a Romupdate this does not work anymore.
I recommend not to install any VGA Patches. Instead just set the text size to more small and search in this forum for some registry hacks to change system font etc. and see if you like it, when the font is more small (this is good for Opera or PIE as you can view complete page!)
Nice reply, thanks mate!
erm
yes
ahem
erm
what are the ><ahem, ahem>< "app buttons"
Andy (thicky wicky Blacky wacky Adder)
thank you. I will give the 3 setups a go. I did read that if you soft reset before the counter that video calling does not work.
will give it a go and see what happens I'm sure there will be a cab file on here to sort it out.
anyone wishing to add any pearls of wisdom fee free. I'm learning more and more all the time.
app buttons: the buttons on the keyboard, which have changing functions. these functions are shown at the bottom of the screen. These buttons can be found to the right and left of the red and green call buttons on the keyboard.
about video calling: yes, this feature is installed after you switch on first your device. it is activated with one cab file. If you can find out which cab file this is, you can install it manually in the basic setup.
Yep the title is right-
I've searched the forums countless times and read the wiki. Although i am more than technically experienced to perform the "upgrades" I cant quite nail down the step by step procedures for my device and the upgrades i desire.
Feel free to rip me a new one- but please direct me down the right path.
Oh i'm not in any kind of hurry.
I have a Cingy/ATT 8525
and I want to run Black and I want all the worthy tweaks that
allow one to have an extended array of functionality.
Thanks in advance and sorry for creating clutter.
Hi
I dont understand what you are asking - are you asking how to flash the black 2.5 rom? The instuctions to do so are in the black 2.5 thread, and also on the RUU installer package that you can download.
All tweaks are also included in the black 2.5 thread.
Its quite a simple flash process.
1) Backup all your personal data as your the device will be formatted (not including the microSD card)
2) Connect your phone via activesync on a winxp pc
3) Run the installer
4) In approx 5 mins, its all done
hi nmonger
thanks for the advice.
What i am trying to accomplish is get a fully tweaked 8525- or as damn
close as humanly possible.
realtor said:
hi nmonger
thanks for the advice.
What i am trying to accomplish is get a fully tweaked 8525- or as damn
close as humanly possible.
Click to expand...
Click to collapse
I think that first you have to figure out what do you want with your phone...there are a lot of Tweaks and changes and improves you can do to your 8125, but not all of them could be usefull for you or ...
My personal sugestion is that read again the forum and decide wich things want to change and the go for them... everyone here can help you and there are already a lot of threads whit step-to-step info about upgrading and Tweaking your device.
I could also sugest that you follow the upgrading guide here on the forum and first upgrade the bootloader, then the OS and the Radio... and after that you will have a better phone and the time to look for more changes to apply...
regards man
mablan
realtor said:
hi nmonger
thanks for the advice.
What i am trying to accomplish is get a fully tweaked 8525- or as damn
close as humanly possible.
Click to expand...
Click to collapse
really depends on what you want to use the device for. upgrading is easy [if you read and follow the guides], and the available roms on this site are pretty damn stable (for me at least). Depending on which rom you install, you will need different tweaks, add-ons. For example, for your 8525, at a minimum, you will want the cingular settings (which some roms bake in) and the keyboard fix. Everyone has their favorite installs. For me, a corporate user of the 8525 on Cingular, I have installed the following (keep in mind this is a subjective list) ... I don't watch video or listen to music much with this device, so I have not tweaked it out for these things:
Must haves (for me)
Goodlink
Bandswitch 1.2.3
BatteryStatus today plugin
Cingular Settings (by wpbear)
ComButtong-Toggle-Vibrate-Fix
8525 Keyboard Patch
Cyberon Voice Dialer (I use it, and I know it is lame)
Pocket IE Card Cache (to cache on my SD Card)
Acrobat Reader LE
Speed patch (buzzing for Black 2.5 when I run that ROM)
MPM patch (for Custel 1.3 when I run that ROM)
Fun/nice to haves
GoogleMaps
Picsel Browser
o2plus
Just because I am a mac person at heart
Slidelock [slide 1.06] by A_C
iPhone app by Grumps
Others will have their opinions
weinson said:
Just because I am a mac person at heart
Slidelock [slide 1.06] by A_C
iPhone app by Grumps
Others will have their opinions
Click to expand...
Click to collapse
Brethren the devil is among us - repent and ye may be saved!!!
The power of Gates compel you.
Mike
mikechannon said:
Brethren the devil is among us - repent and ye may be saved!!!
The power of Gates compel you.
Mike
Click to expand...
Click to collapse
The newton only carried me so far
weinson said:
The newton only carried me so far
Click to expand...
Click to collapse
Mike
mablan said:
I think that first you have to figure out what do you want with your phone...there are a lot of Tweaks and changes and improves you can do to your 8125, but not all of them could be usefull for you or ...
My personal sugestion is that read again the forum and decide wich things want to change and the go for them... everyone here can help you and there are already a lot of threads whit step-to-step info about upgrading and Tweaking your device.
I could also sugest that you follow the upgrading guide here on the forum and first upgrade the bootloader, then the OS and the Radio... and after that you will have a better phone and the time to look for more changes to apply...
regards man
mablan
Click to expand...
Click to collapse
Thanks for your suggestions i've already begun the re-read
weinson said:
really depends on what you want to use the device for. upgrading is easy [if you read and follow the guides], and the available roms on this site are pretty damn stable (for me at least). Depending on which rom you install, you will need different tweaks, add-ons. For example, for your 8525, at a minimum, you will want the cingular settings (which some roms bake in) and the keyboard fix. Everyone has their favorite installs. For me, a corporate user of the 8525 on Cingular, I have installed the following (keep in mind this is a subjective list) ... I don't watch video or listen to music much with this device, so I have not tweaked it out for these things:
Must haves (for me)
Goodlink
Bandswitch 1.2.3
BatteryStatus today plugin
Cingular Settings (by wpbear)
ComButtong-Toggle-Vibrate-Fix
8525 Keyboard Patch
Cyberon Voice Dialer (I use it, and I know it is lame)
Pocket IE Card Cache (to cache on my SD Card)
Acrobat Reader LE
Speed patch (buzzing for Black 2.5 when I run that ROM)
MPM patch (for Custel 1.3 when I run that ROM)
Fun/nice to haves
GoogleMaps
Picsel Browser
o2plus
Just because I am a mac person at heart
Slidelock [slide 1.06] by A_C
iPhone app by Grumps
Others will have their opinions
Click to expand...
Click to collapse
Interesting list you have there weinson.
So i have already stated on my journey here is what i have so far, its not a long list but i suppose its a good starting point.
WM6 Pro Black 2.5
Radio Version 1.40.30.00
What i need my 8525 to be is as highly efficient as possible i need the apps to open quickly and be easily found, i do a little traveling so i need my music and maybe a video or two. Web browsing to be effortless because i need to get on the internet for my job (i am a real estate agent) and i need the best WiFi connectivity available in addition to the 3g connection because sometimes im in Wifi enable buildings and cant get a "cell signal", thats also why i am looking at VOIP options and lastly i am searching for a non-windows push service, i'm really going to miss my BB until i can get a reliable solution.
I want to thank everyone for there help so far and the members for this forum ive been lurking for a while and am very impressed with its diligently helpful atmosphere.
Keep sending those suggestions- I will continue my search.
A new noob is here.
I have a battery question.Battery on my vario 2 goes up and down from 10 to 20 and not to 12 or 15 or any value in between.Is that normal?
Plus i am using coolcamera is there any settings to have maximum performance?
thx in advance....
max414 said:
A new noob is here.
I have a battery question.Battery on my vario 2 goes up and down from 10 to 20 and not to 12 or 15 or any value in between.Is that normal?
Plus i am using coolcamera is there any settings to have maximum performance?
thx in advance....
Click to expand...
Click to collapse
Just on the battery point - yes 10 / 20 /30 is normal and so far no way to have smaller steps.
Mike
Hi Folks,
1st thread on here.
Just got myself a spank new Touch Pro2. First thing i did before i started installing my apps was to check HTC website for Updates. Sure enough they had a new ROM version and WM6.5 upgrade. Now i have it working exactly how i want except for LogMeIn. I have used LogMeIN on my HP Ipaq for ages but cant get it sorted out on my HTC. Is it an issue with WM6.5 i wonders?
Basically it looks like it wont work with Opera at all. In Internet Explorer I can download and install the RActrlCE.cab file no prob. Looks good, can login to my list of computers, can even get as far as being connected to the required PC but when i click the Remote Control icon all i get is a white screen.
Any suggestions???
Have the same problem would really appreciate any help... Pls.
wm6.5 comes with the newer version of PIE (pocket internet explorer) which is not compatible with the plugin logmein uses for remote desktop. You can try and do a search to the wm6/6.1 PIE cab file. Hope that helps, cuz I was in the same boat.
LogmeIn works on my 6.5-official ROM in IE.
mostberg said:
LogmeIn works on my 6.5-official ROM in IE.
Click to expand...
Click to collapse
Not in mine!, you can install IE TOGGLE, it let's you use PocketIE (the old version of IE), with that Logmein works
log me in
it took me ages to work this out... i have to use the old version of explorer (downloaded from here somewhere, although the ie switcher might work also) and i need to use 'kfortp' which lets me type in logmein when i am connected, before i could connect but not type anything. crazy
LogMeIn's response
I raised a ticket with LogMeIn about this and got this highly useful reply 2 days later.
"We have discovered an issue when connecting to a LogMeIn computer using a mobile device running Windows Mobile 6.1.4 / 6.5 and IE6 Mobile. Currently, it is NOT possible to connect with these devices due to incompatibility with the plugin.
I hope this helps. Please feel free to contact me if you have any further questions.
Wendy Merrifield | Sr. Support Representative "
If anyone is reading this don't install kfortouchpro. Which i read on another forum was required to get this to work. I don't see what the need for it is. Plus it froze my Touch Pro2 up on the first reboot after install. Luckily i was able to connect to my phone with activesync and uninstall the app to stop my phone from freezing up . Hope this helps someone. As far as Logmein working just use the two files below. Install XDA first, reboot, install IEtoggle, open IEtoggle, switch IE to PIE, start up IE and sign into logmein. This worked for me. Hope it helps someone. Sorry if this is already on this forum somewhere else.
crazycrak said:
If anyone is reading this don't install kfortouchpro. Which i read on another forum was required to get this to work. I don't see what the need for it is. Plus it froze my Touch Pro2 up on the first reboot after install. Luckily i was able to connect to my phone with activesync and uninstall the app to stop my phone from freezing up . Hope this helps someone. As far as Logmein working just use the two files below. Install XDA first, reboot, install IEtoggle, open IEtoggle, switch IE to PIE, start up IE and sign into logmein. This worked for me. Hope it helps someone. Sorry if this is already on this forum somewhere else.
Click to expand...
Click to collapse
Great find, thanks for posting it! Anybody who's searching for a solution in the future and finds this thread will appreciate that!
crazycrak said:
Install XDA first, reboot, install IEtoggle, open IEtoggle, switch IE to PIE, start up IE and sign into logmein. This worked for me. Hope it helps someone. Sorry if this is already on this forum somewhere else.
Click to expand...
Click to collapse
I tried this and it works but now I cannot get IEtoggle to switch me back to IE6. I tried restarting and then selecting IEtoggle, thinking PIE was somehow still running, but even after this I am still stuck in PIE.
EDIT: Since this original post on 4/18 I have had to do a hard reset, since my email and SMS windows for individual messages (compose, read) were not popping up. I have no idea if it is related to using IEtoggle, but I am not going to use this again on my TouchPro2 6.5 just to be safe.
after some trial and error
Here goes, first off i apologize horizons1. I have the same phone and WM version as you. Haven't experienced any of these problems. All i can say is make sure you install XDA WM 6.1 PIE first, then reboot, then install IEtoggle might of been your problem. After further testing i have found that Kfortouchpro is necessary to log into windows from your log in screen or type any text once in windows. When opening kfortouchpro it lets you switch to M$ IME which is required for your keyboard to work. Now after testing this for a bit, if you don't switch it back to eT9/multiplay in the program before you reboot it will not display your slider bar to unlock your phone on boot up. Only way to fix is with activesync. Have tested this 3 times in different configs. I wish i could just use remote desktop thats built into WM. But i am currently connected behind two routers one being bridged to the other. Have tried many times to get this to work with no luck. So if anyone can help me with that, it would be much appreciated. Too bad logmein won't just patch this problem. Their program works great after jumping through all these hoops to get to your desktop.
sirphunkee said:
Great find, thanks for posting it! Anybody who's searching for a solution in the future and finds this thread will appreciate that!
Click to expand...
Click to collapse
Mark me down for one who appreciates this thread. After days of research and knowing the files I needed to download but am hesitant to sign up for new forums/stuff in general, you folks at xda developers got me. Looking forward to figuring out future mobile issues!
Dan
i can conect to logmein now with my HTC HD2 but my keyboard is not working :S i cant type any thing....
please help me
no buddy ?
and i got an other problem ... i can't return to PIE with IE TOGGLE.mscr softreset doesn't work ..i still get IE6
i got a HTC HD2 (T8585)
Currently I'm running the Cell Pro V11 and although I don't think this ROM-version can be the problem, I thought it was worthy mentioning.
I'm trying to get the official F1-applet going that mobile users can download from http://mobile.formula1.com but for some reason it comes up with an OutofMemory-error even when my TP2 has "only" 48% used after a soft reset.
I was wondering if anyone has experienced this as well or that maybe a JAVA-update is in order or that there is some volatile memory that needs excluding in the registry for this app to work.
Really appreciate some answers/pointers from fellow F1-fans.
Same problem for me as well. Haven't figured out what is wrong. Really wish it wasn't a Java applet.
I will look into that. Downloading and testing.
Sergio76 said:
I will look into that. Downloading and testing.
Click to expand...
Click to collapse
Much appreciated Sergio; I know you're quite the busy bee...
In the FAQ section for the TP2 you will find a link to install JavaFX.
The repeat the procedure and you will not get out of memory anymore
Thanks for that; will try later tonight or tomorrow and report back...
/edit: it works... Bit slow though but I will try it out next F1 to see how accurate it is.
Thanks for the JavaFX hint.
Installed fine but unable to login message keeps coming up with unable to find server.
Any hints mates?
stock Sprint TP2 6.5 Sense 2.5.
Woke up this AM in the USA, & lo & behold the app worked for Round 3 of the WCC - Malaysia.
Nice stuff.
Must've been server issues not allowing some of us to connect the last couple of days.
Best advice I can say for Touch Pro2 owners is download the JavaFX & install that before downloading latest F1 App.
Should be able to get the HTC soft keyboard up & running too & u can choose not to use the app's own proprietary soft keyboard.
Hey there!
For all of you with SoD, please do try my idea... been testing all afternoon, and even though its early to say, I'm sure it is working.
It occurred to me, that maybe windows still had some control over the hard keys while running Android.... so i had the following idea!
Install AE Button Plus 2.6.5.cab (or maybe another version) and UNBIND all hard keys. I guess maybe the End/Lock key will be enough, but i just unbinded all of them as i dont use Windows mobile anyway since i got Android! ahaha . THEN, launch our dear Android the usual way. This way, I can still answer calls and navigate using touch if i do feel like using Windows Mobile for whatever strange reason!
I now use FD Droidboot and disabled sense/titanium on my barebones Miri Rom.
Result: Screen comes up every single time i press the lock key, and goes off every single time i click the same key. Works as it should now. Immediate response too (using a class 2 card)
Brilliant! Me very happy! This was getting annoying.
Also, yeah i confirm, the workaround for the mic gain, using the wired headset, seems to work for me.
Darkstone Desire V5
Radio : 2.12.50.02_2 (does seem better on the battery! Thanks to whoever suggested it! and thanks to all the devs and testers!)
PLEASE LET ME KNOW IF THIS WORKS! Just thought that I should share this since a lot of people are having the same issue....
Peace and Kudos to everyone and specially to the programmers!
WHERE DO I FIND ''AE Button Plus 2.6.5.cab''? SEARCHED BUT COULDN'T FIND CAN YOU PLS MIRROR
MYKEE92 said:
WHERE DO I FIND ''AE Button Plus 2.6.5.cab''? SEARCHED BUT COULDN'T FIND CAN YOU PLS MIRROR
Click to expand...
Click to collapse
google it i found it.
air23cpt said:
google it i found it.
Click to expand...
Click to collapse
SORRY.. FOUND IT
EDIT: STILL NOT WORKIN FOR ME
thanks. it makes sense. I will try that!
so i assume this method also works for darkstone's and dan's froyo builds?
SOLVED
Just switch back to the no speedy zimage
MYKEE92 said:
Just switch back to the no speedy zimage
Click to expand...
Click to collapse
That still gives me the SOD. I'm gonna try the OP's method and see if it helps. I'll report back soon.
How to disable Lock/End key in Winmo?
Yep, was working all day flawlessly, but towards the end of the day was getting slow and started happening again... even after restarting. Thanks for the help testing this!
Now i notice that after having unbinded all keys, all of them except the End call key, are still unassigned.
Is there a fix or registry key to completely "disarm" the Lock/End key while in Win Mo? I still think this is related to SOD somehow.