Database Users

[REQ] original Roms for XT720

Buddies,
can anyone upload the original roms for Milestone XT720? (SG, Kr, and other)
So we can do more testing worry free. If anything goes wrong, we can just flash it back to original. It would be nicer if someone can also show how to flash the rom.
------- Edit ---------
Flashing Guide by Hahutzy
Hahutzy said:
Alright, I just crashed my phone into an infinite FC loop by messing with system/app, so a reflash was in order.
Here's how I successfully flashed it back to stock using Windows 7 32bit (dense text ahead):
1) Search somewhere along the lines of "RSDLite - download here" on google
2) Go inside first link, download the file that's named somewhere along the lines of "RSDLite_4.5.3.zip"
3) Install it.
4) Go to http://and-developers.com/sbf:xt720
5) Download the 2nd Full Flash rom, the one where the provider is "Southeast Asia"
6) Unzip that file, you now have a .sbf folder (not file)
7) Put that .sbf folder in C:\Users\Admin\My Documents
8) Shut down phone, take out battery
9) Hold Power + Volume Down + Camera buttons all at once
10) Put in the battery while holding those buttons
11) Phone is now in bootloader mode (screen looks like a command prompt)
12) Release the buttons, and plug USB to computer and phone
13) Open RSD Lite, your phone should be detected as connected (Device name was like "S OMAP 3440" or some BS like that)
14) Click "..." to browse for the .sbf file in C:\Users\Admin\My Documents
15) In RSD Lite, click to highlight your connected XT720, and then click "Start". The first column beside the connected phone should now have a green icon thing, and the ROM is being flashed.
16) DO NOT TOUCH YOUR PHONE, THE CABLE, OR THE COMPUTER! (I went and took a dump)
17) When the "Status" column in RSD Lite says "Please manually power up this phone", so shut it down and power it again. Note: The status stays in "Checksum Group 37" for a verrrrryyyy long time before saying "Rebooting". I thought it got stuck there, but it ended up ok.
18) Your XT720 is now reflashed to stock.
19) You can now close RSD Lite. It will complain saying you will damage the attached device, but I pulled it out wayyyy before this (I unhooked it when it told me to reboot manually) and my XT720 is not dead. You may choose to close RSD Lite before unhooking your XT720.
20) Post your results in this thread and confirm or reject my procedure.
spiderx_mm, you may quote this on your first post for others' easy access to this procedure if you so wish to.
Click to expand...
Click to collapse

I agree on this, i need a EU rom.

i am using an SG xt720. is there anyway to dump the rom?
@mariomsg1, i remember u have reflashed ur rom once before right? may i know where did u get the sg starhub rom last time? could u share it please. thanks

http://and-developers.com/sbf:xt720

xt720 said:
http://and-developers.com/sbf:xt720
Click to expand...
Click to collapse
yes, that is

there latest ROM is STR_U2_01.18.2
mine is STR_U2_02.18.3 (bought unlocked retail version from expansys europe)
anybody got same unrooted ROM? Mine has problems, I am stuck with ROOT which stopped working after couple of days, and now I can neither un-root, nor root again.

mariomsg1 said:
I agree on this, i need a EU rom.
Click to expand...
Click to collapse
can u share a step-by-step flash guide?

U can flash with RSDlite. just need a sbf file.

okie. any version do u recommend? or shall i just use the latest version?

Yes
Sent from my Milestone XT720

Sorry, can i know how to put the phone into bootloader mode? I cant not find in google and this forum for xt720.

press volume and power together

can not go to boot loader. Already press power and volume button

first you need to switch off the phone, then press camera button and power and keep those pressed until recovery icon appears. THEN press volume up and power, if I remember this correctly.

solnyshok said:
first you need to switch off the phone, then press camera button and power and keep those pressed until recovery icon appears. THEN press volume up and power, if I remember this correctly.
Click to expand...
Click to collapse
press play button and power, then press volume up and camera button

play button = small button next to the camera shutter

please help
When i do the guide, phone at first go to recovery mode, and nothing happen. RSD lite can not recognize the phone. I use recovery mode to wipe cache and data like it said factory reset. Then i get stuck. Phone can not start up, stand at motorola logo.
I still can go to recovery mode, but not boot loader mode. And it appear error in recovery mode: E:\ can't open /cache/recovery/command. Now how can i repair my phone?

flash sbf file with rsd lite on bootloader mode

Sorry i cannot put the phone to bootloader mode. It get stuck at recovery mode when i press vol up and camera. And computer did not regconize the phone also. I guess that i still missed the way to go to boot loader. Can you please do a step by step guide? What kind of windows you use?
mariomsg1 said:
flash sbf file with rsd lite on bootloader mode
Click to expand...
Click to collapse

civi309 said:
Sorry i cannot put the phone to bootloader mode. It get stuck at recovery mode when i press vol up and camera. And computer did not regconize the phone also. I guess that i still missed the way to go to boot loader. Can you please do a step by step guide? What kind of windows you use?
Click to expand...
Click to collapse
go to flashing mode directly by pressing volume up+camera button+power button. after that just flash the sbf in provided the windows can see ur phone. make sure u also install the required driver

[Q] Help Installing 2.3.1 Update

Hi. Can anyone help me out here?
I downloaded the file that a few users had linked to in the update thread (I can't get OTA because I'm in Japan).
I renamed it to "update" (I had it as update.zip but then it appeared as update.zip.zip).
I initiated the reboot mode, but a black screen with the Android character and a triangle with an exclamation mark inside it appears and the phone just stops. I needed to remove the battery to turn it off.
Is something going wrong here? My phone is factory unlocked and has not been rooted nor have I put any other modifications on it. Someone mentioned that the file is being stored on the "SD Card" portion of the storage and thus it has to be moved to a different directory?

TokyoGuy said:
Hi. Can anyone help me out here?
I downloaded the file that a few users had linked to in the update thread (I can't get OTA because I'm in Japan).
I renamed it to "update" (I had it as update.zip but then it appeared as update.zip.zip).
I initiated the reboot mode, but a black screen with the Android character and a triangle with an exclamation mark inside it appears and the phone just stops. I needed to remove the battery to turn it off.
Is something going wrong here? My phone is factory unlocked and has not been rooted nor have I put any other modifications on it. Someone mentioned that the file is being stored on the "SD Card" portion of the storage and thus it has to be moved to a different directory?
Click to expand...
Click to collapse
A the screen with the ! you need to press the vol up and power real quick, then you'll get the recovery options.

Thanks so much! That worked.

how come when i try the man update, i ge to the part where you choose update.zip, i click power then it goes to another screen asking me to choose from another menu, then i will click something and it moves to another menu. wtf?

BiGMERF said:
how come when i try the man update, i ge to the part where you choose update.zip, i click power then it goes to another screen asking me to choose from another menu, then i will click something and it moves to another menu. wtf?
Click to expand...
Click to collapse
you are clicking execute on update.zip and not in a folder right?

i followed the steps i always have on my nexus one. grrrr

Should the file look like update.zip on windows? or update and with the extension of zip?
I tried to update but I am stuck at the triangle with ! I tried to hold the volume button and push the power but it doesn't work. What I am doing wrong?

raeef said:
Should the file look like update.zip on windows? or update and with the extension of zip?
I tried to update but I am stuck at the triangle with ! I tried to hold the volume button and push the power but it doesn't work. What I am doing wrong?
Click to expand...
Click to collapse
i wouldnt say hold it i would say hit them in succession

slowz3r said:
i wouldnt say hold it i would say hit them in succession
Click to expand...
Click to collapse
So after the recovery I should wait for the tri with ! and then hit the volume up then power button. Ok, so the file name should be update.zip? or update with an extension of zip. I am little bit confused here. Thanks

raeef said:
So after the recovery I should wait for the tri with ! and then hit the volume up then power button. Ok, so the file name should be update.zip? or update with an extension of zip. I am little bit confused here. Thanks
Click to expand...
Click to collapse
not sure how the new recovery works, if you can navigate to any .zip file and flash it but to be sure name it update.zip and make sure it isnt update.zip.zip

slowz3r said:
not sure how the new recovery works, if you can navigate to any .zip file and flash it but to be sure name it update.zip and make sure it isnt update.zip.zip
Click to expand...
Click to collapse
Worked now, but actually the file was named update.zip.zip but now the phone shows it's on 2.3.1
I feel the phone takes more time to load the home screens now when I reboot:s

I have a problem installing update.
I have unlocked bootloader, root and installed clockwork recovery.
I have error message (code 7). Signature verification is disabled.
Could someone help please?
Update: Nervermind, I just installed MoDaCo custom rom

Good to know. Gonna try this.

raeef said:
Worked now, but actually the file was named update.zip.zip but now the phone shows it's on 2.3.1
I feel the phone takes more time to load the home screens now when I reboot:s
Click to expand...
Click to collapse
after flashing new updates, first boot does take longer

help motorola bravo

My motorola bravo was being updated when it became a brick. The phone comes on and puts a red M and there does not advance. You can not do the recovery. I need an idea of how to revive it. And try to install but nothing happens sbf reposition the M and there does not happen.

comeranas said:
My motorola bravo was being updated when it became a brick. The phone comes on and puts a red M and there does not advance. You can not do the recovery. I need an idea of how to revive it. And try to install but nothing happens sbf reposition the M and there does not happen.
Click to expand...
Click to collapse
did you boot into bootloader (by holding power + volume up) and then apply the sbf?

and remove your battery and reinstall it.

If I've done both and what comes out is only the red M

comeranas said:
If I've done both and what comes out is only the red M
Click to expand...
Click to collapse
your not holding the vol up earlier enough do the following:
1) take out the battery
2) press and hold down the vol up button
3) w/o releasing rhe vol up button, put the battery in.
4) within 3 seconds a black screen will come up with white text.
5) do the sbf
i have bricked the bravo so hard during development and always been able to get to a bootloader screen. one time i bricked so hard it went directly to the bootloader, so you def. can get in to sbf, unless you vol rocker is broken, then you may be screwed. in that case plug int he phone, let it bootloop and try to start the sbf, it might reboto into bootloader for you, but probably not.

bandroidx said:
your not holding the vol up earlier enough do the following:
1) take out the battery
2) press and hold down the vol up button
3) w/o releasing rhe vol up button, put the battery in.
4) within 3 seconds a black screen will come up with white text.
5) do the sbf
i have bricked the bravo so hard during development and always been able to get to a bootloader screen. one time i bricked so hard it went directly to the bootloader, so you def. can get in to sbf, unless you vol rocker is broken, then you may be screwed. in that case plug int he phone, let it bootloop and try to start the sbf, it might reboto into bootloader for you, but probably not.
Click to expand...
Click to collapse
I manage to load the bootloader and the sbf but when the phone is restarted only relocate the white with red M

comeranas said:
I manage to load the bootloader and the sbf but when the phone is restarted only relocate the white with red M
Click to expand...
Click to collapse
so then you should reboot holding vol down and then the recovety will load.
hit vol up and vol down at the same time to load options.
then wipe cache and wipe data.
wiping data is prob only way u can fix it if you already successfully flashed the sbf.

bandroidx said:
so then you should reboot holding vol down and then the recovety will load.
hit vol up and vol down at the same time to load options.
then wipe cache and wipe data.
wiping data is prob only way u can fix it if you already successfully flashed the sbf.
Click to expand...
Click to collapse
Thanks for the help.
perform the sbf file down twice again but the phone only puts the M, will not let me enter recovery, I think it is a complete brick and not know what else to do.
Too bad there is no sbf2.1 for testing.

hmmm, unless you are going straight to a bootloader screen you should still be able to enter recovery. my only guess is the update was in the middle of updating your recovery when something went wrong and the recovery image is corrupt.
sbf not working plus no access to recovery sounds like a real true brick possibly.
make sure you hold down the vol down and w/o letting go you put the battery in, when you are in this bootloop that is the only way to be sure you get in to recovery.
what happens when you hold down vol down and put the battery in? does it do anything different at all?

bandroidx said:
hmmm, unless you are going straight to a bootloader screen you should still be able to enter recovery. my only guess is the update was in the middle of updating your recovery when something went wrong and the recovery image is corrupt.
sbf not working plus no access to recovery sounds like a real true brick possibly.
make sure you hold down the vol down and w/o letting go you put the battery in, when you are in this bootloop that is the only way to be sure you get in to recovery.
what happens when you hold down vol down and put the battery in? does it do anything different at all?
Click to expand...
Click to collapse
The phone was damaged because it was downloaded in the middle of an upgrade.
when I hold the power and volume down, I put the battery and three seconds later reappears M, does not load the recovery.
I think I'm going to give up.
May be taking it to a store at & t service, can do something?

Take it to the at&t store. Since it is so badly damaged due to the update "failing" they can replace it with warranty
Sent from my X10i TripNMiUI using XDA Premium App

I'm a rep @ an AT&T corporate location. Yea, if that update failed, we take care of it. I assume you're referring to the OTA 2.2.

Reviving an old thread as where comeranas left off is where I am at.
Wife has a new phone already so I am just trying to revive this one. If not, it goes into garbage.
The screen has been powering up to the Motorola logo only. I can hold the volume up and power button to get to the bootloader/usb screen.
I cannot get to the recovery screen by holding the volume down and power button. No matter how many times I try and in what combination, it always powers up to the Motorola logo.
I ran the sbf file on it twice with RSD Lite and each time when it gets to the part of re-booting it says "Phone is being rebooted."
Then after the progress gets to a 100%, it says, "Please manually power up this phone."
The Motorola logo is on the screen and I have tried to simply push the power button, pull the battery and re-insert it and pull the battery, hold the volume button down and re-insert the battery all while still hooked up to the computer.
After a few minutes the Results box says Passed. But the phone still goes no further than the Motorola logo.
So as of now, the phone still only powers up to the Motorola logo and goes no further.
Naturally it had to start acting up 2 weeks out of warranty. Dang blang warranty timers installed in these phones. lol!

You can try sbf_flash on Linux and both the full and fixed sbf with it. I'm on phone now, so I can't give good instructions or links, but sbf_flash is around in one of the recovery threads here, and the fixed sbf is at quarx2k.ru and my rom mirror (see signature).
If you need it, I can make a Linux Live tutorial for sbf flash, only requirement would be 512mb usb stick or memory card.
I once had to flash sbf 3 times in a row to fix a brick from an accidental Defy kernel flash in cwm.

So the sbf files you are referring to are different than the 2.2.1 sbf file HERE?
I don't run Linux on my comp.
I'll look at the fixed sbf file in your sig. Maybe I just need to run it over and over again until the phone pops. lol! Thanks.

FirePro911 said:
So the sbf files you are referring to are different than the 2.2.1 sbf file HERE?
I don't run Linux on my comp.
I'll look at the fixed sbf file in your sig. Maybe I just need to run it over and over again until the phone pops. lol! Thanks.
Click to expand...
Click to collapse
The fixed sbf contains the bootloader and kernel and it for when you write to either of them and need to reflash back to stock. Handy for when you accidentally flash a Defy from with a boot.img
You don't have to install linux, just use a Live CD and place sbf_flash and the sbf files on a memory stick. Once the Live CD boots, the memory stick should be on the desktop. Open the folder and right click "Open Terminal Here". In the terminal first type:
su
then
chmod 0777 ./sbf_flash
then
./sbf_flash ./fixed_bravo_sbf.sbf
or
./sbf_flash ./p4_kobe_umts_kobe_user_3.4.2-125_KOB_FFW-4_product-keys-ATT-US_ATT-signed.sbf
Just download one of these for your pc's architecture, if you're unsure, then any of the 32-bits will work.
http://www.linuxmint.com/download.php
The reason I suggest using sbf_flash and Linux is that its supposed to fix phones that sbf flashing with RDS Lite won't fix, and it'll flash files that RDS won't like modded root sbfs. Apparently it flashes differently. Don't ask me the difference cause I don't know.
Good Luck.
You said that you couldn't get to the Stock recovery menu, your volume button isn't broke is it? And have you tried up+power and down+power? Kicking it? JK, but throwing my old razr flip phone into the couch as hard as I could used to fix it....it would freeze on boot, but a good toss and it was good as new.

Thanks, gonna give it a try.
I am kinda wondering at this point if the down volume is broke. Though if it was, she would have said something about it before it went down.
I did smack it a few times to no avail. lol!

[Q] i cant replace the recovery file !

i tried to replace the original file with a new one but i have this message "error " or " system restricted " .

Do you have the phone rooted? If not, http://forum.xda-developers.com/showthread.php?t=1044765
It worked for me on B138 rom.

It is not necessary to root the phone for this. Is the device mounted with read and write? If you do only have the permissions to read you cannot delete the file of course. Which OS do you have?

im using androzip to move the file .

Wait, what? You want to replace the file for the recovery-mode, right? You need to do this on a computer, you cannot do this on your phone. Start up your handset while holding vol+ and vol- at the same time. You will get a coloured screen and on the computer you can replace the file.

XphX said:
Wait, what? You want to replace the file for the recovery-mode, right? You need to do this on a computer, you cannot do this on your phone. Start up your handset while holding vol+ and vol- at the same time. You will get a coloured screen and on the computer you can replace the file.
Click to expand...
Click to collapse
Of course he can do it on his x5, but this way needs root.
Sent from my Huawei u8800 using XDA App

XphX said:
Wait, what? You want to replace the file for the recovery-mode, right? You need to do this on a computer, you cannot do this on your phone. Start up your handset while holding vol+ and vol- at the same time. You will get a coloured screen and on the computer you can replace the file.
Click to expand...
Click to collapse
i did it !! but i cant do step 4 below i just get the same pink screen then nothing happened
1. Important: If your handset does not come with a sd-card you need to install one. Otherwise you cannot install a custom ROM.
2. Install this. You just need to replace one file (backup the old one on your computer before overwriting).
3. Download a zipfile containing the ROM you want to install and place it onto your sd-card. Do not unzip it.
4. Start the phone while holding the vol+-button, you will then boot into the recovery mode you installed in step 2.
5. I saved the install-instructions in case I forget them:

levibuko said:
Of course he can do it on his x5, but this way needs root
Click to expand...
Click to collapse
Ah alright.
The instruction is a bit misleading. Do only press the vol+ button, that will boot into recovery. Did you install the recovery from here, by the way? That is the newest.

XphX said:
Ah alright.
The instruction is a bit misleading. Do only press the vol+ button, that will boot into recovery. Did you install the recovery from here, by the way? That is the newest.
Click to expand...
Click to collapse
I did it , thanks for your help . finally i can turn off orientation lock .
by the way , how i can get the US market with paid apps ??

Well if you browse the Market with an american IP-adress (VPN/Proxy) you should be good to go. But I don't know, maybe you run into other problems then. I have not tried this out...

i heard that there is a hacked version or maybe i have to root the phone to get this market .now i can get only free apps cuz i am not from US or a country that support this type of market .

Can't pass HTC welcome screen

Hi, Guys
I was trying to root the phone by using the hack-ace.cmd and when I get into the final step - updating the ROM from SD card...I accidentally pull out the cable and then the screen stays on the welcome HTC logo forever.
I have tried the volume down button + power or home + power or even re-root the phone. It came back HTC logo again. But the screen will change to something else when I trying to re-root the phone. The process acually successful, but it still report errors in the very end saying "USB connection fail" or "Golden Card fail".
Here are the steps I followed,
Steps for this process:
1. Download the Advanced Ace Hack Kit
2. Extract the files
3. Install Desire HD drivers in /tools/windrivers/
4. Connect the device via USB and turn on USB Debugging in Settings-Applications-Development
5. Run the hack-ace.cmd as Administrator and start the process by typing "1" and "Enter"
6. The process will run and will take about 5-6 minutes to complete
7. Download your ROM of choice, do not extract it, and copy the .zip to the device SD card
8. Rename the file to "update.zip"
9. Power off your device
10. To boot in the bootloader, perform a battery pull, reinstate the battery, and hold the volume down and power buttons
11. Using the volume buttons to navigate, and power button to make selections, boot into Recovery, clear the cache, and select 'install update from sdcard'.
12. When the flashing process has completed, reboot your device and wait about 3-4 minutes for it to boot fully
13. You device is now rooted and has a custom ROM installed
I strongly believe, I forgot to power off the device and go straight to the bootloader and pressed the install update.zip from SD card.
Then I also believe that I used a corrupted ROM from a crap website, which is about 75Mb...Not normal, right?
The screen turn into HTC logo and I waited for 2mins and seen no changes, hence I pulled the cable out....
The final result is that I always get the HTC logo even if I tried to install new ROM file downloaded from a valid site.
Now the problem solved. Love your guys

lkj-17 said:
Hi, Guys
I was trying to root the phone by using the hack-ace.cmd and when I get into the final step - updating the ROM from SD card...I accidentally pull out the cable and then the screen stays on the welcome HTC logo forever.
I have tried the volume down button + power or home + power or even re-root the phone. It came back HTC logo again. But the screen will change to something else when I trying to re-root the phone. The process acually successful, but it still report errors in the very end saying "USB connection fail" or "Golden Card fail".
Sorry about my English, hopefully you can understand what I am saying.
Any one can help me out?
Click to expand...
Click to collapse
No so understand ur indication issue. Firstly are able to get into bootloader mode? If yes, try to flash stock firmware 1.32......from the billiard, but make sure you have stock firmware in your sd card which it should be a Goldcard.
Sent from my HTC Desire HD using xda premium

Hello. I am unable to get into any mode. Just the big welcome screen. Please advise further...

lkj-17 said:
Hello. I am unable to get into any mode. Just the big welcome screen. Please advise further...
Click to expand...
Click to collapse
Use the button combo to get into bootloader mode.
Sent from my HTC Desire HD using xda premium

Hello. The button combinations do not responde. I have tried the "Volumn Down + Power" and "Home + Power". No changes at all.

lkj-17 said:
Hello. The button combinations do not responde. I have tried the "Volumn Down + Power" and "Home + Power". No changes at all.
Click to expand...
Click to collapse
Pull out the battery first, put back, Volume down + power button together at the same time.
Let me know if you have followed this so far and could get it working?
Sent from my HTC Desire HD using xda premium

That is awesome...This time succeeded.. Then, I press the recovery...The screen goes to black with a red upward triangle... now please tell me the next step..

lkj-17 said:
That is awesome...This time succeeded.. Then, I press the recovery...The screen goes to black with a red upward triangle... now please tell me the next step..
Click to expand...
Click to collapse
you have gone into stock recovery not a custom recovery, you could flash stock firmware from boot loader i think but you cant install custom roms untill your get custom recovery + root + eng s off

hi, thank you for your reply. I have downloaded the Radio.img. and I have tried to wipe the data/factory reset, and wipe cache partition. Then I have transferred a valid ROM into SD card and press "Apply sdcard: update.zip" It returned "Signature verification failed, installation aborbed" The phone before was on usb debugging mode and has been rooted successully. Now, I think the original system is died.... Please advise further. Cheers

lkj-17 said:
hi, thank you for your reply. I have downloaded the Radio.img. and I have tried to wipe the data/factory reset, and wipe cache partition. Then I have transferred a valid ROM into SD card and press "Apply sdcard: update.zip" It returned "Signature verification failed, installation aborbed" The phone before was on usb debugging mode and has been rooted successully. Now, I think the original system is died.... Please advise further. Cheers
Click to expand...
Click to collapse
If u r already in custom recovery and s-off applied with fully rooted, u may flash the rom through install zip file option in custom recovery not update zip file. What was ur last running rom? Stock with rooted or.was already flashed from stock to any custom roms? U my tell us more details so that we could be helping u.
Sent from my HTC Desire HD using xda premium

lkj-17 said:
hi, thank you for your reply. I have downloaded the Radio.img. and I have tried to wipe the data/factory reset, and wipe cache partition. Then I have transferred a valid ROM into SD card and press "Apply sdcard: update.zip" It returned "Signature verification failed, installation aborbed" The phone before was on usb debugging mode and has been rooted successully. Now, I think the original system is died.... Please advise further. Cheers
Click to expand...
Click to collapse
Dude here is the rooted stock ATT ROM it includes the radio. Just download place in root of gold card then go to bootloader with power - volume button. it will recognize the PD98IMG file, will ask to load volume up for yes then let it do its thing. Please search and read before you attempt anything with phone. AS ADVICED ON XDA FLASH AT YOUR OWN RISK.
http://www.megaupload.com/?d=Q6YYQFIM
This is the rooted ATT updated ROM with radio do not rename file just place in root of SD (Not in any folder) Good Luck.

Hello, please look at my original post. I have edited and provide more history. Cheers

Hi mate, I am still little bit confused. You said "place in root of gold card" then "do not rename file just place in root of SD"........I am not professional, but I heard the Goldencard before.. Should I just download the PD98IMG.zip then send it to SD card then go to the bootloader see how it goes?

lkj-17 said:
Hi mate, I am still little bit confused. You said "place in root of gold card" then "do not rename file just place in root of SD"........I am not professional, but I heard the Goldencard before.. Should I just download the PD98IMG.zip then send it to SD card then go to the bootloader see how it goes?
Click to expand...
Click to collapse
Yes, u need to flash PD98IMG.ZIP to have your device working back. If your phone is branded , it will require gold card which u should create it one for your device to recognize it or u may download the above mentioned zip file to ur pc then copy to ur sd card first, and get the phone into bootloader mode to see If it could recognize in case ur phone is not branded, If it is so, then u can save time for not creating goldcard and progress to flash the rom from as card.
Remember no need to rename the file. Ur responding in this thread is on & off, users here could not help u when u urge to get ur phone working back.
Sent from my HTC Desire HD using xda premium

Thank you so much. This file got my system back and it works perfectly.

my phone jammed at STEP6 with RUU on my bootloader screen and 'waiting for device' on my WinXP. now I cant do anything!!!
HElp me!!!

I am picking you need to install the right HTC driver, there should be one on the hack kit, if not google it, look for version one. Once I installed it
It carried on and rooted without issue.
Sent from my Desire HD using xda premium

prasadz8 said:
my phone jammed at STEP6 with RUU on my bootloader screen and 'waiting for device' on my WinXP. now I cant do anything!!!
HElp me!!!
Click to expand...
Click to collapse
Go to desktop, right click on my computer select manage, select device manager from left locate device driver from the list in middle panel, locate the htc usb it may have a yellow triangle next to it, right click and select update software Try this first before downloading another driver, if this doesn't work then you well have to locate new driver
Hope this helps
Sent from my Desire HD using xda premium

Here's another option.
http://forum.xda-developers.com/showthread.php?t=1259821
Sent from my Desire HD, running RCMix Runny v3.3