please anybody help my o2 xda exec is npow totally dead ...
when its putd at charging its show charging light bt not any thing...no bootloader working
Have you tried another battery?
Have a read on my sig link, you may find something to help you
Good luck,
Look at the screen carefully under a bright light when it's charging. Do you see anything like Serial/USB? The backlight won't work so it will be faint. If there's nothing, it's a hardware problem. Starting with a new battery would be the most logical first step.
please help
how about the charges indicator, is it blink or stay on orange while u charges your universal? if the charges indicator blink meaning your battery cant be use anymore..try a new battery. it was happened to my universal
Related
I have problem with my jasjar its seems to be dead no more charging the device but when i out the battery the red light is on but when i put back the bettery its again no light on it ...if some one help me please replay Thanx
I got my TyTN a week ago (actually it is a Softbank X01HT)
The device just died today. I cannot turn it on (battery was fully charged), no lights are on, I tried removing the battery, SIM card, soft/hard reset nothing helps, it seems like it is dead and nothing is turning on even when connected to the power.
Can anyone please advise? is there anything I can do to revive it??
thanks
Does it show a constant RED LED light when you plug in the charger?
Mike
Can you describe the incident that lead to the "bricking" of your tytn?
The more we know the better we can make suggestion/give help.
sagig said:
I got my TyTN a week ago (actually it is a Softbank X01HT)
The device just died today. I cannot turn it on (battery was fully charged), no lights are on, I tried removing the battery, SIM card, soft/hard reset nothing helps, it seems like it is dead and nothing is turning on even when connected to the power.
Can anyone please advise? is there anything I can do to revive it??
thanks
Click to expand...
Click to collapse
No light is on when connected, it is just all blank. I didn't do anything actually. Finished a phone call, put the device back in my pocket when I took it out again it was dead and coldn't do anything. No ROM change or software installation or anything. I was wondering if there is any way to "revive" it.
Thank you for the help in advance !
sagig said:
No light is on when connected, it is just all blank. I didn't do anything actually. Finished a phone call, put the device back in my pocket when I took it out again it was dead and coldn't do anything. No ROM change or software installation or anything. I was wondering if there is any way to "revive" it.
Thank you for the help in advance !
Click to expand...
Click to collapse
Don't think I've heard of one being completely dead before. There are cases where the battery drains very rapidly to zero charge in a veryshort time and will then refuse to charge. BUT in those cases the device at least shows a RED no charge LED when you plug in the charger.
I don't think I can suggest anything other than warranty / repair. I assume you can rule out that the charger is faulty. This could be shown by plugging into PC using USB lead and confirming that again no RED LED shows.
One final thought but I think it is a long shot and that is to leave the battery out for 10 minutes and then retry.
It may be possible that an internal connector has come adrift but unless you wish to open it up then again we're back to warranty / repair.
Mike
Bad news for me. I was afraid I will have to do that...
Thanks for the reply though.
If anyone else has ny suggestion I'll be happy to hear it
I have flash the new rom from t mobile.... after I flash from wm5 to wm6 which complete.... it cant boot anymore... even I have taken out the battery and out it back ..... i press power button no response.... nothing can be seen from the screen.... im afraid it is dead as good....
Take battery out and connect to power. If you see a red light where it lights up to show its charging then the hardware is OK.
Try with battery and see if it charges. NO LED means battery dead.
Need to know if the hardware is COMPLETELY dead or if the battery is the culprit.
If everything is ok and you just need to replace the battery then read this for a safety net while flashing - http://forum.xda-developers.com/showthread.php?t=296722
Cheers...
im able to see the red light if i did not put in battery and i have another unit battery which is workable and when i put in also no resposne.
Sounds like battery contacts may be broken or cracked. Might be unfixable. Usually happens after a drop... You could try to re solder the contacts but no guarantees.
the pda was not drop before....
Are you charging with the original charger or USB/3rd party charger?
Did you let the battery go under 10% charge?
If you are charging without the original charger or with the usb cable it may not be getting the correct voltage which may be confusing the internal charging sensor.
This may also happen if you let your battery go below the 10% mark frequently.
There are a few threads about this so I'll let you search for them. Good luck.
I don't believe it would be the internal fuse as the red LED shouldn't turn on if this was blown.
Cheers...
tmkam said:
I have flash the new rom from t mobile.... after I flash from wm5 to wm6 which complete.... it cant boot anymore... even I have taken out the battery and out it back ..... i press power button no response.... nothing can be seen from the screen.... im afraid it is dead as good....
Click to expand...
Click to collapse
This happened to me too with a regular, unlocked HTC TyTN (not the MDA Vario II from T-Mobile). Fortunately, after about two days, while I thought the handset is "dead", I tried to turn it on again and it worked, just like that. Weird
Hi! i've bought an used Qtek 9090. the problem is that this Qtek don't power on! it doesn't go on bootloader mode, doesn't go on hard reset ecc... but when i charge it, the red led turns on!
what can i do? please help me
well try to charge the battery only in the cradle
if this not help try to borrow working battery from someone, if your device does not start even with working battery then you are screwed (a hardware problem of some kind)
no i think the battery is ok.
there is a way to restore the bootloader? i've read about the jtag, but i don't know anything... can you explain?
Battery is charging only when the LED is orange/amber. Red means problems with charging - that's why xplode proposed putting the baterry directly in the cradle, as it can "fix" the battery.
Well the red light means there is problem, the most comon problem is the battery, but the red light is also shown with motherboard, bootloader, kernel, and other problems
one more option is there. if the battery is not charged from a long time it needs a shock before recharging to activate the electrons. u should apply some 12v at 1 or 1.5 amp for 15-30 sec. than battery will get a little charge which is sufficient to turn on the phone once.................... but do not apply this voltage regularly or for long time.
Hi
im having problems charging my MDA,it doesnt charge,its supposed to have a solid amber light,but instead it blinks or flashes amber,so please help me,i cant charge it
reality_checking said:
Hi
im having problems charging my MDA,it doesnt charge,its supposed to have a solid amber light,but instead it blinks or flashes amber,so please help me,i cant charge it
Click to expand...
Click to collapse
You have a original battery or a new low cost ?
Original Battery
It seems your battery is to low dicharged. Look here are a solution :http://www.htcwizardweb.net/node/2055
it didnt work