Database Users

Display wont turn on - Flashing back original Rom

Hi there,
I got a huge problem with my Touch HD.
The Display does not turn on anymore. When I turn on the phone, it vibrates and after a while I hear the HTC welcome sound, but the display does not show anything.
Also when I start it in bootloader mode the display does not show anything.
I still have warranty for the phone, but I used Duttys 3.9 on it. So I have to flash the original rom now using USPL. The questions are:
Is it possibile to flash it without seeing anything on the display? (Should be possible I think)
How can I see that the flashing worked and I have the original rom and did a hardreset succesfully? Is there a way to see that in the file system when I connect the phone with the PC using Activesync? Can I use Activesync after hardreset without configuring the WM on the phone?
I really need your help now, so please help!
Crusader

Dead Wizard, please help

Few days ago my Wizard died all of a sudden. When turned on it only gets to the point when it shows "HTC smart mobility" and stays there. So not even to the screen with IPL, SPL. I tried soft/hard resetting, playing with battery but it was all no go, same.
I can get to the red-green-blue bootloader screen however, shows IPL 3.08, SPL 3.08. If i connect via USB cable to computer, bootloader screen shows "USB" on bottom. The ROM on the device was TNT's (not sure which version), Windows Mobile 6.1. It worked for ages without any problems with this ROM before this.
ActiveSync does not recognise Wizard at all, I cannot establish connection and therefore downgrade/upgrade the ROM becouse upgrade programs (for exmaple with ROM got originally with the device) say they cannot contact the device.
What are my options, please help.

hy
in my opinion , it is normal for active sync to not recognize your phone , because it's not turn on properly ,i mean it only recognize the phone when you enter windows mobile.
if i were you i would try to flash any rom i like and see if it works. i hope this helps

But ROM upgrade/downgrade program requires ActiveSync connection to run and I can't establish it...How to solve the situation, please advise?

when you are in bootloader screen and your phone is connected to the pc by usb cable just start the downgrade/upgrade program and it should work.

i did that. rom update utility complains that it cannot connect with mobile...
that was tried with:
1. official t-mobile ROM that was on the device when I got it
2. CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE ROM
my IPL and SPL versions now are 3.08

sorry , i can't think of anything that might help you.

same problem
phones a brick.
I can get to the bootloader , i can even perform a succesful hard reset.
But it doesnt get recognized by the computer in bootloader mode. is there any way to flash the rom if the computer doesnt recognize the device?
regards

Try this look for nbd v8.1 or v8.3 .
hold the camera button and do a soft reset but keep holding the camera button until the 3 color screen comes up it should sync your phone then run the nbd rom or original cingular ship rom like this one ** RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1 ** i prefer original then other but that's me. Hope this help you.

bootloader Don't Connect

Hi everybody,i have some problem's with my cingular 8125.I have posted another thread,but no one answered,so i post a little different thread with different question.
My phone won't startup and when i enter to bootloader screen it don't connect's to pc.
It's started when i installed newest windows of CR96,i installed it,and next morning i found my device off and when i turn it on it don't even goes to main screen with ipl spl gsm and os info.It's just show's htc logo till it discharges.
I tried connecting it to pc,but when i enter to bootloader screen it don't connects,it even don't charge the phone when it's power off and connected to pc with usb.
PLEASE HELP ME fix this problem

tried turning it on in bootloader mode? and hard reset?

I just hard reset with tutorial i find on net.Well after hard reset it quickly showed me the ipl spl info on the same logo (it was really quickly),but now it's still the same/
Sometimes when i connect it to pc when ppc is off,the red light start blinking,is this should say something?

can somebody help me?

[Q] Problem with htc touch

Hello, I have the htc touch p3450 and i have a provlima.I installed wm6.5 but because this rom problem I had to go back to the original windows of a buckup I'd rather not do but I did well and now I press to open my cell phone caused the "smart mobility" and then goes out now what is damaged??? how can I fix it???again to put it in the bootloader to pass the windows does not recognize the computer, now what do I I???

[Q] How to Unbrick my HTC Touch(rogers)

hi, i just recently flashed my rom using a reliable source but now my device wont turn on. everytime i push the power button, it shows the htc screen but then shuts off. it dosent get to the windows mobile screen. any ideas on how to unbrick it?

The fact that it will turn on means it is not bricked, a truly bricked pbond will not turn on. While the phone is off hold the camera and the power button down until you see the bootloader come up and connect your phone to your computer via USB cable and wait until you see USB on the screen then flash the rom, if you have HSPL already on your phone you can flash a custom ROM. But make sure it is copatible with hour phone.

Thanks for the advice!!!

Hi i didwhaat you said and used rom update utility.exe to upgrade and flash the rom but im in the samespot as i was before. i have charged the phone. my SPL is 1.11.0000 and IPL is 2.21.0002.
and ideas? my phone still wontt go past the htc screen

Hi
I'm sure you'll find answers in the right forum http://forum.xda-developers.com/forumdisplay.php?f=374