Hello,
I have a very strange behavior with my Omnia II mobile, this occurred after i installed a cooked image, the following behavior for example happen
1) the start up screen show "ORANGE" logo , this logo remains even after i installed many other images.
2) the CALL button not working instead it lock the screen and other times it show the main menue
3) the volum up not working but the volum down no.
can any one help me please
Related
Hey Guys, my windows mobile is getting stuck on the windows mobile screen all the time.
I tried finding hard reset for it (its a chinese elf clone with windows mobile, worked fine for days nd days...)
When i do the following combination
Volume UP + Camera Button + Stylus reset button
It gives me an option
Enter BootLoader Master Clear. (With Blue Back Ground) It automatically exits that screen and then again gets stuck at the windows mobile screen. I've tried pressing enter button, left right but it doesnt proceed to the next level of formatting
2nd combination
Volume Up+ Reset Stylus butto
it gives enter bootloader updated from sd card, sometimes it goes to the windows mobile screen it self. Sometimes it gets stuckl on the enter bootloader screen, i've tried pressing all the buttons and ****
When i connect it to my pc i cant access anything as the phone cant go any further from windows mobile screen.
I dont know the boot loader and **** as i am new. Is there any way i could do something via my sd card? i can copy files in it through my bros mobile.
Any help would be greatly appreciated
i have clone of HTC Touch. Green button+redbutton with reset stylus doesnt do anything and goes to the windows mobile screen as usual....
Please Help me
TH3KiD said:
Hey Guys, my windows mobile is getting stuck on the windows mobile screen all the time.
I tried finding hard reset for it (its a chinese elf clone with windows mobile, worked fine for days nd days...)
When i do the following combination
Volume UP + Camera Button + Stylus reset button
It gives me an option
Enter BootLoader Master Clear. (With Blue Back Ground) It automatically exits that screen and then again gets stuck at the windows mobile screen. I've tried pressing enter button, left right but it doesnt proceed to the next level of formatting
2nd combination
Volume Up+ Reset Stylus butto
it gives enter bootloader updated from sd card, sometimes it goes to the windows mobile screen it self. Sometimes it gets stuckl on the enter bootloader screen, i've tried pressing all the buttons and ****
When i connect it to my pc i cant access anything as the phone cant go any further from windows mobile screen.
I dont know the boot loader and **** as i am new. Is there any way i could do something via my sd card? i can copy files in it through my bros mobile.
Any help would be greatly appreciated
i have clone of HTC Touch. Green button+redbutton with reset stylus doesnt do anything and goes to the windows mobile screen as usual....
Please Help me
Click to expand...
Click to collapse
What do you mean by a clone??
If it is not a phone manufactured by HTC
All the procedures for Hard Reset or ROM flashing will be
totally different...
XDA forums doesn't catalog them ...
Hi, I have an HTC Diamond 2. It stays at the logo screen (black screen with HTC letters in white). It doesn't pass anywhere from there. I've tried using the reset button on the back near stylus, tried the hard reset (Vol Up/Down + Power key) but it doesn't respond. There's an option that "works": If I press the 'call' key + power button, it shows an update menu with the following: 1. Update Logo 2. Update OS 3. Update Eboot 4. Format User Space 5. Return; none work except for the format user space option, but it does nothing.
I've tried also from the PC but it doesn't recognize the device via USB. I downloaded Active Sync, and an update wizard from HTC.com but still no success in recognizing the device.
Please help me, I need this phone to keep working, I don't know what triggered the problem..
Install a new nhb rom and try again.
I want to reflash my P4350 Herald because it's not booting and stucks at T-Mobile splash screen.
I tried to run bootloader by keep pressing camera button and turning ON/reset but it's not going to bootloader and shows the same T-Mobile splash.
I think it's camera button and doesn't working because it's not turning ON using Power button on top neither it's camera was capturing while it was booting in the past.
Any suggestion?
Fixed, boot in IPL, SPL bootloader
I opened the keypad and pressed several keys randomly with Camera button and reset it started the bootloader.
I have this problem with this phone,when i restart it or i power on it displays the last screen that i used instead of samsung boot screen(not the logo),the fist screen i refer.I remember i tried to port a custom rom and i did something wrong and since then it does that.And when i try to enter to downloading mode it jumps directly at that screen without having to press volume up to go there.What could be the problem?It's a hard or soft problem?Otherwise the phone works perfectly.Here's the video:https://imgur.com/a/Iv2igQO
Hi All,
While booting my Asus Zenphone Selfie (ModelNo: ZD551KL-6J510IN), the screen is stuck at below error:
Security Error: This phone has been flashed with unauthorized software & is locked. Call you mobile operator for additional support. Please note that repair/return for this issue may have additional cost.
I do see the booting logo screen, but it remains there throughout. I tried multiple ways listed below:
1. Just pressed power button and it throws above error and remains there with no further progress or reaction to pressing any buttons.
2. Long pressing the POWER button + Volume Down Key and it shows same as above scenario with no progress.
3. Long pressing of POWER button + Volume Up Key and it shows "Fastboot Mode !!!" in blue text color at the top left corner with the normal boot screen ASUS logo in the middle and remains there with no further progress.
I googled for solutions and saw options using Odin Tool, but they are all specific to Samsung Device. I even downloaded the same and also the phone model firmware (around 1.6Gb), but I dont see the filetypes required by Odin tool in the downloaded zip. Also since the device is locked in that boot screen itself, when connected to System, its not detecting anything and hence when running adb devices it doesnt list any devices attached.
Could you please guide me on how to resolve this? Let me know if I need to provide more details.
Thanks in advance.