dear members of XDA-developers.
i have a question to ask, when i install a new application on my htc HD2, the system tells me that is needs to reboot the phone so i can see the changes.
when i try to reboot, i only get the white screen with the green HTC logo, and it stays there. and the only way to get it to boot back on, is to take away the battery, wait for a few minutes and then try again.
by the way, soft reset did not solve it. can anyone help me please. thank you
What application did you install as this would be helpful to know. It might be s known application that does not play so nice with the HD2.
i installed 4 apps.
and every time it's the same problem
i installed the shortcut for wifi toggle
and bluetooth toggle,
garmin
and soft reboot shortcut
chlikha said:
i installed 4 apps.
and every time it's the same problem
i installed the shortcut for wifi toggle
and bluetooth toggle,
garmin
and soft reboot shortcut
Click to expand...
Click to collapse
Ok do this unindtall all of the apps you listed and reinstall them one at a time and soft reset it after each one until you get the issue back. When the issue has returned whatever app you had just instlled iswhat is giving you the problem. I recomd not using this app and trying to find another app that will do the same function.I also recomend you just place a quick link to the Comm Manager on your Home screen as this will adress hour WiFi toggle wants just have one more touch to acheive this is all. Install Touch Tools and it allows you to intergrate the boot option screen to your end key so all house have to do is hold down the end button and it will give house a screen to power off, soft reset, enter bootloader,hard reset, suspend, and did onnect data. you can also place a quick link to your bluetooth on your Homens screen.
Related
I have a problem that started after a couple of days. Originally the device automatically started the phone when switching it on, so after the boot up sequence automatically the pin check was displayed.
Since yesterday the device no longer activates the phone, and I manually have to enter the comm manager and activate the phone which is quite nasty as I did not notice the phone module was off the whole day.
Is there any registry entry that forces the device to activate the phone module each time when switching on? The strange thing is that when doing a soft reset the phone module will be activated automatically, this only happens when powering the system off and back on (i.e. each morning).
Thanks.
I had the same thing. Are you using a close utility ?
Putting the Comm Manager in the exceptions for InClose solves the problem. The phone is still sometimes slow starting up though.
I had the same thing. Are you using a close utility ?
Click to expand...
Click to collapse
No, it's basically out of the box with only 1-2 applications installed and uninstalled, so one of them must have been the reason.
I just got AMEO from T mobile which I believe the same as HTC advantage.
despite of being SIM locked by T-mobile, I am experiencing another problem in waking up the device after it goes into sleep mode.
After I left the device idle for few minutes, it turn the whole screen off. (not only the back lit).
I can see the LED for BT/wifi still blinking.
But no matter which button I press, it couldn't be turn on at all.
As final resolve, I have to soft reset the device every time after it sleep!!!
Can some experts here advise me? is it a defective unit? or some other settings are wrong? Do I need to return it to the vendor?
I don't want to keep the device always on by disabling the auto off feature in power setting either.
Does someone have the same problem like me?
Thanks for any advise in advance.
What happens if you put it on the keyboard while "asleep"? Even if it means taking it off there first.
If doing that and pushing the power button fail to turn it on, it's a defective unit.
it's the same problem even i attach it to the keyboard.
a bit funny though, if i press the power button from the side to turn it off. I won't have any problem to turn it on.
but if i leave it to auto off mode, then i can't turn it on until resetting it from the back hole.
can it be improved if I flash to other ROM?
My Ameo does it occasionally - I find that (re)attaching the keyboard tends to bring it out of sleep better than pressing the power button. I get the impression that by pressing the power button, it sometimes gets confused that its still on and tries to turn itself off (even when it is already off). Tends to lead to a reboot every few days though. Waiting (fingers x'd) for WM6 to see if it behaves better.
do you guys have this option
settings>button>lock
try to toggle the checkbox to see if it helps
I'll try it! I found it under Settings/System Tab, 'Key Lock' icon.
I'll report back within the week.
I can confirm that it doesn't help my AMEO.
anyway, thank for your thought.
Digital.Diablo said:
I'll try it! I found it under Settings/System Tab, 'Key Lock' icon.
I'll report back within the week.
Click to expand...
Click to collapse
To digital:
can I ask for a favor from you. could you try to make the device auto power off without sim card in.
and see whether u will have the exact problem i have or more frequent it dead...
due to my unit is locked to T mobile network, i still haven't put any sim card in.
Tried it without simcard in but it still turns on ok after the fix. TBH, sounds like you're getting the issue more than me - mine only does it occasionally (once every couple-3days) and as yet, I've not managed to locate a consistent cause. I'll keep my eye on it though with the fix and let you all know how I get on.
the other thing that i can think of out of at the moment is that you are running some prog from the sd card/microdrive in the background so when you try to switch your device on then it does not get started and hence the problem...
try tweaks2k (you can use the trial version)
it has a bunch of settings for this... (just check that it is compatible with ameo first)
install 'screenoff' and assign to one of the button.
it works fine.
have to make work around like this now. no idea why this problem only happen to my AMEO...
anyway, thanks for all of u!
royalmail said:
Does someone have the same problem like me?
Click to expand...
Click to collapse
I have a similar problem. My device does not wake up in one case from 10 approximately.
Frequency of occurrence of a problem decreases if to close the phone's program compulsorily.
In other branch to me have told, that the problem can be because of the Active Sink's program. Have allowed advice to disconnect automatic start of this program. But I cannot check up because my program all the same is started if to switch off an option of the automatic device. :-(
hard reset can solve the problem completely. ;-)
I'm pleased to say that the 'button' tweak posted here has worked... So far!
Thanks Gents (and lasses if there are any).
That happened to me too yesterday.
I hard reset it and reinstalled everything to microdrive now. (trying to eliminate the possiblity of compaction thread) Removed SPB Pocket plus, which I've come to be quite suspecious by now. Also removed true VGA. So far I have not got a single freeze yet, touch wood. If it runs okay for a few more weeks with no freezing, will put back true VGA and see how it goes again. Will try to isolate the offending software bit by bit.
Hi,
I've had the same problem with my Advantage
After some weeks of test i have found how to solve the problem on my Advantage. perhaps it's only works on mine but you can try.
i have installed "all" progs on memory and not on microdrive. on microdrive i have only a few exe like wififofum or progs not intend to run when i turn my Athena off.
then no more problem waking up my athena.
I think the problem could be that microdrive cause a time out or thing like this when we wake up the PDA then athena freeze waiting about datas from microdrive.
then for me now it's programs like browsers, sscontact, traylaunchers etc .. => memory
programs like painting tool, etc ... => microdrive and close (kill process) them before sleep mode.
and all is ok now for me. The only freeze in 1 week was Pocket IE freezing (but the reason is pocket IE sucks)
There was actually another point that I forgot to mention concerning the freezing. I found out that the free miniSD card came with the bonus pack was actually faulty. With the pocket mechanic professional benchmark, I managed to see only less than 200kb/s read and write! I did a hard reset, and installed everything on microdrive, and touch wood, I have not got a single reset or freezing yet these two days. I install nothing into memory, as we all know that it takes up to 2 seconds to write a block of data into NOR ROM, which is why we should always shift our directory of IE cookies/history/cache away from the main memory. Since the main memory (NOR ROM) is good for executing program in place but terrible in writing, Microsoft's MikeCal thinks we should not keep any data there. (See this thread: http://blogs.msdn.com/windowsmobile/archive/2006/03/16/552996.aspx ). I try to keep the memory as free as possible to minimise compaction thread kikcing in. Will see how it goes in the next couple of weeks and take on from there.
I'm happy to confirm that, after a weeks testing, the button 'fix' seems to have resolved the issue! Thanks all.
I have been experiencing similar problems.
After being left on standby for a period of time (>10mins), the unit sometimes goes into "autistic" mode.
i.e:
Power button does not function. Unit GSM light flashes, but will not resume from sleep.
I've tried the following:
Attaching USB cable. No change.
Attaching keyboard. No change.
Calling phone. No change.
Soft reset. Starts ok.
I have now tried:
Settings/System/Key Lock
- set to 'Do not lock buttons'
However, I suspect ActiveSync.
The unit was attempting to Sync every 5 minutes, while connected with a USB cable. I therefore followed advise (read elsewhere) to create a dummy server to allow an ActiveSync schedule to be created, then deleted.
http://www.modaco.com/index.php?showtopic=246522
This is coincident with the start of the problem.
Regards
Devany said:
I have been experiencing similar problems.
After being left on standby for a period of time (>10mins), the unit sometimes goes into "autistic" mode.
i.e:
Power button does not function. Unit GSM light flashes, but will not resume from sleep.
I've tried the following:
I have now tried:
Settings/System/Key Lock
- set to 'Do not lock buttons'
Click to expand...
Click to collapse
I had same problem once I enabled Key Lock function.
However, once I disable key lock, it works fine again.
Does anyone know how to stop the Today screen activating when the device turns off/on? I often turn my Nike off when I need to do something else for a moment and I'd like to be able to immediately return to what I was doing without going to the Today screen and then into the Start Menu. Even worse if it's something under Settings I have to go through the menus.
I don't understand very well the problem, do you mean that, when you are in any screen, turn off the screen and turn on again it's in the Today screen?.
In my device that doesn't happens, if i turn off/on the screen, the device remains in the application, form, etc.. that I was.
Mine does the same as the guy above me .. only using sliding actions i go back to today screen
btw since I've installed sliding actions .. my phone connects to internet everytime I receive message or have had a phone call
dekoning, I used to have the Today screen activate on slide as well. I use Slide Actions to disable all slide actions. It didn't take the first time, but after a few tries it now is working perfectly.
After using MortPlayer, I've figured out that the Today screen is activated whenever the screen turns on.
carlosmozas, what ROM version are you using?
I had to hard-reset my device at the beginning of the year and this issue was gone. But it came back! It started happening last weekend, I don't have a clue what I changed to cause this.
I don't want to hard-reset again!
Jive Turkey said:
I had to hard-reset my device at the beginning of the year and this issue was gone. But it came back! It started happening last weekend, I don't have a clue what I changed to cause this.
I don't want to hard-reset again!
Click to expand...
Click to collapse
Maybe setting up device new and creating a backup (Sprite Backup or similar) is faster than locating the problem itself
Hi,
Has anyone noticed that the Diamond2 always returns to the home screen after comming out of lock mode or standby?
For example, i could be listening to music, after 5 mins of me not using the screen, the phone would lock. On entering the PIN, the TouchFlo retuns to the home screen, instead of my music app. Same goes for any other app on the TouchFlo. My previous Touch Pro came back to the last opened app on TouchFlo.
Not a huge problem but would be good if there was a tweak to stop this behaviour.
M
mgumbs said:
Hi,
Has anyone noticed that the Diamond2 always returns to the home screen after comming out of lock mode or standby?
For example, i could be listening to music, after 5 mins of me not using the screen, the phone would lock. On entering the PIN, the TouchFlo retuns to the home screen, instead of my music app. Same goes for any other app on the TouchFlo. My previous Touch Pro came back to the last opened app on TouchFlo.
Not a huge problem but would be good if there was a tweak to stop this behaviour.
M
Click to expand...
Click to collapse
I dont think that the people here see it as a problem like you and myself I started a thread weeks ago
http://forum.xda-developers.com/showthread.php?t=507358
1300 views but still no solution, its prob too hard to do Dammm HTC
Martyn
Ps if you find a solution please let me know
I also experienced a problem with switching screens when turning the device back on. Uninstalling TouchLockPro solved the problem for me...
@Brempie
I took your comment about uninstalling TouchLockPro. I didnt have that program installed but i took the PIN lock off my phone temporarily, and hey presto, phone works as it should!
So now we know what causes the problem, hopefully HTC will have a fix for it....eventually.
I'll live with the bug for the moment, i prefer a phone which is PIN locked.
Cheers,
M
I have never had this happen to me. I also installed throttle lock and it always goes back to where it was when I unlock. I just uninstalled throttle lock and did a soft reset to test and make sure it never reverted back to the home screen. Nothing.
No matter what program I am in it wakes up to that same spot. I don't know what the registry hack for this is but there probably is one.
Could you possibly try this? Install ThrotleLock v0.6 and then see if it will work. If it wakes back up to the same screen and not TF3D uninstall it and see if it goes back to TF3D or not.
*warming up this thread*
So, has anyone yet found a solution for this?
It's annoying for me as i have set the device to go to standby after 2 minutes of inactivity when on battery. When i listen to music with the musicplayer in foreground, or when i write an email and someone interrupts me, i put the device in standby by myself or it does automatically after the defined time.
In 95-99%, when i turn back on the device, it has returned back to the touchflo home screen. Very rarely, and it could not yet find any system, the device wakes up exactly where i left it. This is, what it should do everytime but sadly it doesn't.
I'm using the Stock-ROM, activated PIN-Lock of my SIM, having a (WinMobile default) device Lock (4-digits) set to activate after 24 hours (this way it does not activate itself during normal usage, unless i long-press the end-call-button), using 2ndToday with SPB Diary.
It gets more annoying for me every day, because especially during working time i frequently turn the device on and off. Reading RSS-news, turning the device off for an incoming call, turning the device on just to get welcomed by the home-screen instead of staying on the news i previously read isn't that comfortable
Having to open the taskmanager and reactivating the program means at least two more clicks everytime i use the device... so - any solution?
edit: I think i tracked down the source of the problem, watch in this thread:
http://forum.xda-developers.com/showpost.php?p=4366357&postcount=14
Every time I install G-Alarm on my phone, TouchFlo seems to get disabled.
It is still enabled in the settings menu, but the home screen is just a HTC wallpaper, and when I press the windows key the start menu is opened.
I have tried rebooting multiple times, but nothing seems to help...
Only removing the application has worked so far for me
Any ideas?
EDIT: I'm having the same problem with G-Profile!
It seems that the programs just disables the TF service from launching/running...
Haven't experienced that problem myself, using G-Alarm v1.5.1 here.
Hmm.. Strange.
I have heard more people say the are using some of the "G-programs" on the Touch Pro 2. So it must be something in the ROM I guess.
I am using an unbranded Dutch version. But I have no clue on how to fix this...
Ok. I have figured out that if I remove the PIN entry screen from the start up sequence (so no PIN has to be entered anymore) G-Profiles works. I haven't tried the others yet, but I'm sure they'll work as well.
The thing is... I would like my phone to have a bit of protection by the PIN code
I don't use G-alarm on my Dutch TP2. But I have this issue with not starting TouchFlo3D also. On HTC advise I resetted the device. Then it worked for abou 4 hours and after that it wouldn't start anymore. The screen staus black with the fancy HTC in the sceen... but no "starting touchflo".
Als for that reason I instaled SPB mobile shell latest... but this will not update new SMS or Mails in the main screen... more people on SPBCLUB have this issue... I think it has something to do with the TP2 and not with SPB... more people with same problems?
Ahh...so that's what causing it.. I have a G-Alarm too but didn't realize it's affecting the interface not loading up
Several soft reset and it'll load up. Kinda annoying until the developer fixes it (and we have to pay for the new version )
I don't think this problem is just with G-applications, I am having the same problem withouth any g-apps installed. After a few reboots it usually works again, but I think this is a more genereal TP2 issue.
michaelra said:
Ahh...so that's what causing it.. I have a G-Alarm too but didn't realize it's affecting the interface not loading up
Several soft reset and it'll load up. Kinda annoying until the developer fixes it (and we have to pay for the new version )
Click to expand...
Click to collapse
I've asked on his forum, and he said it probably was a TouchFLO bug...
Thread here: http://forum.ageye.de/viewtopic.php?f=22&t=721&start=0
(I'm BiT on there...)
I've had the exact same issue but found out that with me it wasn't linked to G-Alarm but to the 'Background4AllTabs' plugin,
I've hard reset tons of times, tried several alternate installs, but once I start changing TF3D options like th background or clocks, it slows down tremendously in screen rotation and it often won't start after reboot...
hmm i dont know if you still have these problems but a few days ago i figured out a solution^^
The problem is the entry. I've got an htc touch pro 2.
Soo to get TF3D starting try fallowing thing:
-Go to "Settings-->Connections" and turn ON the flightmode (this will disconnect all)
-Then restart your phone... wait a few seconds and TADAAA TF3D SHOULD start.
-Go to "Settings-->Connections" turn OFF the flightmode
-Enter your PIN
-Now your phone should connect to your provider.
So if this work you have to do this every time you restart your phone... so turn on flightmode --> restart--> turn off flightmode
I hope this way is not only working on my phone
btw sorry about my english xD
GreeZ $me
Flightmode works for me
Indeed it works now. But I have another interesting thing.
I was used of waiting nicely looking at the PIN input screen. Wait, lets say,. 20 seconds; cancel the pin input and see the Touchflow coming up in 100% of the cases. So I could live with the problem.
Now I installed Navigon who puts a file in the autorun folder. And now Touchflow never starts up any more with the exception of the Flightmode trick.
Is navigon guilty?
i never used G-Alarm but i have the same problem.
so i've tried checking on/off Today/Item/TF3D, tried Flight Mode, and it still won't work. i'm talking like only 30-50% of the time it does work. and I never had PIN1 enabled!
i'm no programmer but it is conflicting with apps we install because TF3D works perfectly when the phone was fresh or hard-resetted. btw i'm using 6.1 Stock T-mobile