Related
I have a question. I've only had a WM5 device for about 9 months now. I now have Cingular 8525 and for the past 5 days I have left it on overnight only to find it frozen, won't wake up in the morning and the battery drained.
I did the Activesync hack, scanned the notifications queue and did not see any notifications for midnight on the dates the device would not wake up.
Its frustrating.
I was wondering if WM5 did some form of house cleaning nightly. It seems that this house cleaning wakes up the device and somewhere it freezes on and finally the battery gives out. I don't have any backup software going on.. Nothing. I just find the device won't wake up, won't even soft reset. Plug it in for a minute, then it soft resets with a dead battery.
I am going to look at the notifications queue tonight and delete any notifications I see that are for 0:00 and tomorrow and see what happens.
I am hard resetting it Monday and re-installing if I can't figure it out. It has been really annoying these last 5 mornings.
Sometime when I reboot I see a NO GSM message. Then get no radio, then about 10 minutes later I get service. But the password and the userid on the wap data connection has been erased and my bonded blue tooth headset password is forgotten, the device is there but it prompts me to bond with a passkey when I go to intiate the headset...
Thanks for your thoughts
This has, I believe, alot to do with your microSD card - see the link below.
http://forum.xda-developers.com/showthread.php?t=284636
Thanks I'll check it out. I do have a sd card in the device. It may be the cause.
Thanks.
I use SPB Backup, to initiate automated reboots. What it does is back up to ur microsd and then initiate a reboot. i do this every second night. which is cool, keeps the fone fast.
Nightly lockups were a pain in the neck for me - I have had 2 Orange M3100 and both suffered the same nightly lockup issues.
I found that 4 things have fixed the issues and i found that all 4 have to be done
1. Fake server trick
http://www.aximsite.com/boards/showthread.php?t=112638
But i found that not deleting the new server works fine
2. Untick Enable Advanced Network Functionality
Under Settings\Connections\USB to PC
3. Stopping Activesync running when not needed
In the notification queue there are 3 entries to start replog.exe (activesync)
you can safely delete the instruction to start after time change - This will stop Activesync from running.
NB the other 2 need to be there, do not delete any other notification of replog.exe
4. Never leave activesync running so always do a soft reset after syncing or at least before you charge the phone.
Not saying that these will work for everyone but they have worked for me on both phones.
try XBar. It incorporates cron, so you can schedule whatever program to run whenever you want it. Grap a copy of quickreset and run it. It will reset the Tytn at whatever time you set it for. I have mine resetting at 5 in the morning.
You may disable the standby mode when the unit on the external power supply. I have done, and I think it's not a big deal and it does not worth to struggle with locks on wakeups with external power!
I having a sort of similar 'morning trouble' with my TyTN, but limited to GSM connectivity. When I wake up, I am most of the cases disconnected from network with 'No service' message in the baloon. Searching for network is unsuccessful, nothing works until I soft reset the device.
Just a thought: You do have the "poweroff after x minutes" setting checked right?
I had what I thought was the same issue this morning, but it was caused by me unchecking the above setting (I do this during meetings when I'm using my BT keyboard) the previous day. This morning, while it was still dark out, I pressed the power button and nothing (the backlight was off and this actually put it into powersave mode). I pressed it again and still nothing (device came out of powersave mode with backlight still off). Because it was dark when I did this, I initially thought that I had the "won't return from powersave" problem.
machmandp said:
Nightly lockups were a pain in the neck for me - I have had 2 Orange M3100 and both suffered the same nightly lockup issues.
I found that 4 things have fixed the issues and i found that all 4 have to be done
1. Fake server trick
http://www.aximsite.com/boards/showthread.php?t=112638
But i found that not deleting the new server works fine
2. Untick Enable Advanced Network Functionality
Under Settings\Connections\USB to PC
3. Stopping Activesync running when not needed
In the notification queue there are 3 entries to start replog.exe (activesync)
you can safely delete the instruction to start after time change - This will stop Activesync from running.
NB the other 2 need to be there, do not delete any other notification of replog.exe
4. Never leave activesync running so always do a soft reset after syncing or at least before you charge the phone.
Not saying that these will work for everyone but they have worked for me on both phones.
Click to expand...
Click to collapse
I have a similar problem. Every monring when the device is still plugged on the wall charger, it hangs before I wake up. I would therefore miss a lot of calls or other notifications. I have done the defragmentation of the card, but it still doing the same thing every morning.
I have also tried all your steps above, ecept step 3, which I need your assistance as to how to delete the particular file you were referring to.
Many thanks in advance.
marsb007 said:
try XBar. It incorporates cron, so you can schedule whatever program to run whenever you want it. Grap a copy of quickreset and run it. It will reset the Tytn at whatever time you set it for. I have mine resetting at 5 in the morning.
Click to expand...
Click to collapse
holy crap, i thought i was the only one that used xbar.. i have been using this program for 2 or 3 years, this is my one and only must have program!! FYI 3.2 beta was released
anyway.. on to this problem, i used to have this on my wizard, what i found was that plugging it and leaving it on would cause the lock up. Now when i plug it in i hit the power button and havent experienced it since on my wizard or on my 8525 yet. and i still get all of my push mails etc.. however i will say that if i get a call or text while im sleeping the device does wake up and the screen stays on..
another program you might want to try is SKSchema... they have several scripts that you can run, including a soft reset at a certain time. I also use the script which allows me to toggle between 3G/UMTS to save battery when I don't need 3G.
"Fake Server" did not work for me
Tried what is outlined - fake server, soft-re-boot, stopping activesync. Not sure how to delete the specific files in the notification queue.
Worked for one night! Next night back to the sleeping Tytn.
I am going to try spbTime to trigger an alarm at 12:01am and see if that helps.
TyTn does not "die" anymore!
The fake server is definitely part of the answer. As is stopping ActiveSynch. This needs to be combined with one other suggestion made on the forum of leaving the unit on when plugged in. This however has the potential drawback of "burning" the screen with the same image as when left powered on.
In addition to Activesynch, the problem is with the Notification queue (again as someone suggested on this forum). In the Suspend/Sleep mode under power, the unit cannot notify and goes into a perpetual loop.
Here is what I did that has now worked for 11 days. I installed spb PocketPlus and placed the "Screen Toggle" icon on the main screen. (According to spb, "Toggle" simply blanks the screen but does not put it to sleep/Suspend). So when I plug the unit in to charge it, I simply "toggle" the screen. The screen is blank (just like "Sleep"/"Suspend") but the unit is powered up. This has the added benefit of allowing you to listen to music with the screen blank.
I have now gotten to "toggling" even under battery power. Miraculously, my intermittent BT and Wi Fi issues have also disappeared. There may be cheaper solutions than buying Pocket Plus, but spb's Pocket Plus is convenient and has some other nice features.
Mortsaver might be a cheaper option?
Active Sync
I don't know if any of you have tried Active Sync "beta" 4.5". Its seems to have fixed many of my problems with connection and some of the issues described here.
flane
coolshot said:
This however has the potential drawback of "burning" the screen with the same image as when left powered on.
Click to expand...
Click to collapse
This problem affects CRT and plasma displays (phosphor based), but not TFT.
I just got AMEO from T mobile which I believe the same as HTC advantage.
despite of being SIM locked by T-mobile, I am experiencing another problem in waking up the device after it goes into sleep mode.
After I left the device idle for few minutes, it turn the whole screen off. (not only the back lit).
I can see the LED for BT/wifi still blinking.
But no matter which button I press, it couldn't be turn on at all.
As final resolve, I have to soft reset the device every time after it sleep!!!
Can some experts here advise me? is it a defective unit? or some other settings are wrong? Do I need to return it to the vendor?
I don't want to keep the device always on by disabling the auto off feature in power setting either.
Does someone have the same problem like me?
Thanks for any advise in advance.
What happens if you put it on the keyboard while "asleep"? Even if it means taking it off there first.
If doing that and pushing the power button fail to turn it on, it's a defective unit.
it's the same problem even i attach it to the keyboard.
a bit funny though, if i press the power button from the side to turn it off. I won't have any problem to turn it on.
but if i leave it to auto off mode, then i can't turn it on until resetting it from the back hole.
can it be improved if I flash to other ROM?
My Ameo does it occasionally - I find that (re)attaching the keyboard tends to bring it out of sleep better than pressing the power button. I get the impression that by pressing the power button, it sometimes gets confused that its still on and tries to turn itself off (even when it is already off). Tends to lead to a reboot every few days though. Waiting (fingers x'd) for WM6 to see if it behaves better.
do you guys have this option
settings>button>lock
try to toggle the checkbox to see if it helps
I'll try it! I found it under Settings/System Tab, 'Key Lock' icon.
I'll report back within the week.
I can confirm that it doesn't help my AMEO.
anyway, thank for your thought.
Digital.Diablo said:
I'll try it! I found it under Settings/System Tab, 'Key Lock' icon.
I'll report back within the week.
Click to expand...
Click to collapse
To digital:
can I ask for a favor from you. could you try to make the device auto power off without sim card in.
and see whether u will have the exact problem i have or more frequent it dead...
due to my unit is locked to T mobile network, i still haven't put any sim card in.
Tried it without simcard in but it still turns on ok after the fix. TBH, sounds like you're getting the issue more than me - mine only does it occasionally (once every couple-3days) and as yet, I've not managed to locate a consistent cause. I'll keep my eye on it though with the fix and let you all know how I get on.
the other thing that i can think of out of at the moment is that you are running some prog from the sd card/microdrive in the background so when you try to switch your device on then it does not get started and hence the problem...
try tweaks2k (you can use the trial version)
it has a bunch of settings for this... (just check that it is compatible with ameo first)
install 'screenoff' and assign to one of the button.
it works fine.
have to make work around like this now. no idea why this problem only happen to my AMEO...
anyway, thanks for all of u!
royalmail said:
Does someone have the same problem like me?
Click to expand...
Click to collapse
I have a similar problem. My device does not wake up in one case from 10 approximately.
Frequency of occurrence of a problem decreases if to close the phone's program compulsorily.
In other branch to me have told, that the problem can be because of the Active Sink's program. Have allowed advice to disconnect automatic start of this program. But I cannot check up because my program all the same is started if to switch off an option of the automatic device. :-(
hard reset can solve the problem completely. ;-)
I'm pleased to say that the 'button' tweak posted here has worked... So far!
Thanks Gents (and lasses if there are any).
That happened to me too yesterday.
I hard reset it and reinstalled everything to microdrive now. (trying to eliminate the possiblity of compaction thread) Removed SPB Pocket plus, which I've come to be quite suspecious by now. Also removed true VGA. So far I have not got a single freeze yet, touch wood. If it runs okay for a few more weeks with no freezing, will put back true VGA and see how it goes again. Will try to isolate the offending software bit by bit.
Hi,
I've had the same problem with my Advantage
After some weeks of test i have found how to solve the problem on my Advantage. perhaps it's only works on mine but you can try.
i have installed "all" progs on memory and not on microdrive. on microdrive i have only a few exe like wififofum or progs not intend to run when i turn my Athena off.
then no more problem waking up my athena.
I think the problem could be that microdrive cause a time out or thing like this when we wake up the PDA then athena freeze waiting about datas from microdrive.
then for me now it's programs like browsers, sscontact, traylaunchers etc .. => memory
programs like painting tool, etc ... => microdrive and close (kill process) them before sleep mode.
and all is ok now for me. The only freeze in 1 week was Pocket IE freezing (but the reason is pocket IE sucks)
There was actually another point that I forgot to mention concerning the freezing. I found out that the free miniSD card came with the bonus pack was actually faulty. With the pocket mechanic professional benchmark, I managed to see only less than 200kb/s read and write! I did a hard reset, and installed everything on microdrive, and touch wood, I have not got a single reset or freezing yet these two days. I install nothing into memory, as we all know that it takes up to 2 seconds to write a block of data into NOR ROM, which is why we should always shift our directory of IE cookies/history/cache away from the main memory. Since the main memory (NOR ROM) is good for executing program in place but terrible in writing, Microsoft's MikeCal thinks we should not keep any data there. (See this thread: http://blogs.msdn.com/windowsmobile/archive/2006/03/16/552996.aspx ). I try to keep the memory as free as possible to minimise compaction thread kikcing in. Will see how it goes in the next couple of weeks and take on from there.
I'm happy to confirm that, after a weeks testing, the button 'fix' seems to have resolved the issue! Thanks all.
I have been experiencing similar problems.
After being left on standby for a period of time (>10mins), the unit sometimes goes into "autistic" mode.
i.e:
Power button does not function. Unit GSM light flashes, but will not resume from sleep.
I've tried the following:
Attaching USB cable. No change.
Attaching keyboard. No change.
Calling phone. No change.
Soft reset. Starts ok.
I have now tried:
Settings/System/Key Lock
- set to 'Do not lock buttons'
However, I suspect ActiveSync.
The unit was attempting to Sync every 5 minutes, while connected with a USB cable. I therefore followed advise (read elsewhere) to create a dummy server to allow an ActiveSync schedule to be created, then deleted.
http://www.modaco.com/index.php?showtopic=246522
This is coincident with the start of the problem.
Regards
Devany said:
I have been experiencing similar problems.
After being left on standby for a period of time (>10mins), the unit sometimes goes into "autistic" mode.
i.e:
Power button does not function. Unit GSM light flashes, but will not resume from sleep.
I've tried the following:
I have now tried:
Settings/System/Key Lock
- set to 'Do not lock buttons'
Click to expand...
Click to collapse
I had same problem once I enabled Key Lock function.
However, once I disable key lock, it works fine again.
Does anyone know how to stop the Today screen activating when the device turns off/on? I often turn my Nike off when I need to do something else for a moment and I'd like to be able to immediately return to what I was doing without going to the Today screen and then into the Start Menu. Even worse if it's something under Settings I have to go through the menus.
I don't understand very well the problem, do you mean that, when you are in any screen, turn off the screen and turn on again it's in the Today screen?.
In my device that doesn't happens, if i turn off/on the screen, the device remains in the application, form, etc.. that I was.
Mine does the same as the guy above me .. only using sliding actions i go back to today screen
btw since I've installed sliding actions .. my phone connects to internet everytime I receive message or have had a phone call
dekoning, I used to have the Today screen activate on slide as well. I use Slide Actions to disable all slide actions. It didn't take the first time, but after a few tries it now is working perfectly.
After using MortPlayer, I've figured out that the Today screen is activated whenever the screen turns on.
carlosmozas, what ROM version are you using?
I had to hard-reset my device at the beginning of the year and this issue was gone. But it came back! It started happening last weekend, I don't have a clue what I changed to cause this.
I don't want to hard-reset again!
Jive Turkey said:
I had to hard-reset my device at the beginning of the year and this issue was gone. But it came back! It started happening last weekend, I don't have a clue what I changed to cause this.
I don't want to hard-reset again!
Click to expand...
Click to collapse
Maybe setting up device new and creating a backup (Sprite Backup or similar) is faster than locating the problem itself
dear members of XDA-developers.
i have a question to ask, when i install a new application on my htc HD2, the system tells me that is needs to reboot the phone so i can see the changes.
when i try to reboot, i only get the white screen with the green HTC logo, and it stays there. and the only way to get it to boot back on, is to take away the battery, wait for a few minutes and then try again.
by the way, soft reset did not solve it. can anyone help me please. thank you
What application did you install as this would be helpful to know. It might be s known application that does not play so nice with the HD2.
i installed 4 apps.
and every time it's the same problem
i installed the shortcut for wifi toggle
and bluetooth toggle,
garmin
and soft reboot shortcut
chlikha said:
i installed 4 apps.
and every time it's the same problem
i installed the shortcut for wifi toggle
and bluetooth toggle,
garmin
and soft reboot shortcut
Click to expand...
Click to collapse
Ok do this unindtall all of the apps you listed and reinstall them one at a time and soft reset it after each one until you get the issue back. When the issue has returned whatever app you had just instlled iswhat is giving you the problem. I recomd not using this app and trying to find another app that will do the same function.I also recomend you just place a quick link to the Comm Manager on your Home screen as this will adress hour WiFi toggle wants just have one more touch to acheive this is all. Install Touch Tools and it allows you to intergrate the boot option screen to your end key so all house have to do is hold down the end button and it will give house a screen to power off, soft reset, enter bootloader,hard reset, suspend, and did onnect data. you can also place a quick link to your bluetooth on your Homens screen.
I have a stock unrooted Verizon Galaxy S5. For several months my phone has been plagued by several issues at startup. Whether I reboot the phone or start it up after the battery has died, it always enters an odd state immediately after loading and seems to get stuck in this state for an undetermined and variable amount of time (anywhere from a few seconds or minutes to hours or even overnight).
While in this state, this is what happens:
1. Screen stays on. Once I unlock the phone, the screen stays on. The side button doesn't do anything to lock the phone or turn off the screen. Holding down the button, however, still triggers the power menu. The screen timeout never triggers, even though it should turn off the screen after 2 minutes of inactivity.
2. WiFi and Bluetooth turned off. Even if they were turned on before I powered down the phone, they are not enabled when the phone first boots up. I can manually turn them on but the WiFi will not connect to a network, even if one is available. It may show it is connecting to the network, but it gets stuck at "Checking the quality of your internet connection" and continues to use the 4G network for data connectivity. This happens no matter what WiFi network I am within range of, so it's not an issue with the network or router itself. If I am not near a network at all I will still experience the other problems of not being able to lock the phone, etc.
3. Startup applications don't load. I have Tasker on my phone, but it doesn't load and show it's notification bar icon.
Otherwise, I can use the phone normally and open applications, surf the web, etc. It seems that loading some applications and using the phone eventually causes the phone to exit this mode, but I haven't been able to find a single particular application or series of steps to fix the problem. If I power on the phone and don't use it that just seems to make it take even longer to fix itself.
Once it gets out of it's weird state, the WiFi connection will become active (it will turn on WiFi if I haven't done so manually already) and it will connect to a known network if one is available, the phone will lock itself or I can do so from the side button, and things like Tasker and Power Save mode will turn on.
I am stumped as to what could be causing this problem or how to fix it. It seems the phone may be doing some kind of check, maybe related to Knox, that hangs during startup and prevents certain things from working until it straightens itself out.
Any clues into what this problem is, what is causing it or how I could further analyze this problem and determine its cause would be greatly appreciated.
Never heard of or experienced these issues. May want to contact Samsung.
Have you installed any official updates from Verizon at any point? I've heard of phones having phantom problems like this after receiving a bad update. I would definitely contact Verizon if you did update at any point. If not then like BigBot96 said, contact Samsung about the problem.
My wife's Note 2 did something similar when the battery died. I had to factory reset. Her phone was rooted/unlocked & running a custom TW ROM, though. May I suggest doing a complete factory reset and Odin. Backup data to computer or external sdcard since this will clear the entire device.
Edit: After rereading OP's post it actually sounds like an app is hanging at startup which could cause this behavior. A logcat should tell you what's going on.
Sent from my SM-G900V using Tapatalk