Anyone else have problems w/ inop volume rocker buttons after installing CM7 or any other rom for that matter?
Sent from my T-Mobile myTouch 3G Slide using XDA App
Ekorshus said:
Anyone else have problems w/ inop volume rocker buttons after installing CM7 or any other rom for that matter?
Sent from my T-Mobile myTouch 3G Slide using XDA App
Click to expand...
Click to collapse
I noticed it not working on my wife's slide. Thought it was just me because I bought it off ebay.
sryan1983 said:
I noticed it not working on my wife's slide. Thought it was just me because I bought it off ebay.
Click to expand...
Click to collapse
Yeah, weird.... See, if I sit there & jack around w/ 'em long enough, they'll eventually come back to life & then be really responsive for a while thereafter...
But if I leave 'em alone for an extended period of time... I have to jack around w/ 'em again to get 'em to respond...
Sent from my T-Mobile myTouch 3G Slide using XDA App
The only problems I have been having with cm7 is buggy wifi.
Related
Was wondering if anyone else has this issue. My slide did this stock and also does this on any rom I install. When scrolling through a web page I can scroll down just a little bit but when I let go of the screen it will just scroll all the way to the bottom by itself. Its like it lags and then just endlessly scrolls on its own. My behold 2 did this but my cliq didn't. Anyone else ran into this and know if there is a fix?
Sent from my T-Mobile myTouch 3G Slide using XDA App
I have had that happen to me a few times, I always thought it was me not the phone but I guess not.
Have experienced this as well.
Sent from my T-Mobile myTouch 3G Slide using XDA App
Ok cool. Thought i was going crazy. Hmm since when did i get a htc liberty? LOL
Sent from my HTC Liberty using XDA App
I have also experienced this a couple of times.
Sent from my T-Mobile myTouch 3G Slide using XDA App
ok maybe im not nutz
I have had this happen to me I thought I had a bad touchpad or sumthin, I have even had it click to scroll all by its self even tho im not touching the pad. somtimes I think it may be do to shadow moving over the pad.
bhang
Happens to me too. It seems to be when the phone pauses for a moment like it's busy and then continues... If you happen to be scrolling during that moment it reads your movement as much faster than it actually was and sends your page flying at light speed.
Sent from my T-Mobile myTouch 3G Slide using XDA App
Tangent_ said:
Happens to me too. It seems to be when the phone pauses for a moment like it's busy and then continues... If you happen to be scrolling during that moment it reads your movement as much faster than it actually was and sends your page flying at light speed.
Sent from my T-Mobile myTouch 3G Slide using XDA App
Click to expand...
Click to collapse
Yep that's when it does it the most
Sent from my HTC Mytouch 3G Slide using XDA App
Almost never happened on my G1. Happened ALL THE TIME on my Cliq, and I get it maybe once a day on the Slide. Its annoying, and you would think there would be some kind of fix for it.
Yeah, big time problem with the Slide. BY FAR my biggest gripe with this phone is the HORRIBLE touch screen. It feels nice, but it's not very accurate. They definitely skimped here.
I've been dealing with a phantom touch issue with my shift. Pefectly centered in on the botto of the screen where it hits the phone button in sense. Its looking like a hardware issue.
My question is, has anybody else experienced this and has anybody dealt with taking a rooted phone back to sprint for service?
Thoughts?
Sent from my PG06100 using XDA Premium App
infinitedreck said:
I've been dealing with a phantom touch issue with my shift. Pefectly centered in on the botto of the screen where it hits the phone button in sense. Its looking like a hardware issue.
My question is, has anybody else experienced this and has anybody dealt with taking a rooted phone back to sprint for service?
Thoughts?
Sent from my PG06100 using XDA Premium App
Click to expand...
Click to collapse
I had a weird issue where an area (the left side of the screen 2mm strip) on the touchscreen didn't work at all. I used the one zip RUU back to stock and brought it in and they gave me a new slider (whole top portion). Just happened 2 weeks ago.
I have bad problems with that and screen protectors, especially when it's really hot and humid (like everyday here in tampa)
Sent from my PG06100 using XDA App
At first I thought it was the screen protector, but the problem persisted after I stopped using them. And then I thought it was a bad rom or rom install, so I tried 3 different ones with no change. So ill just update myself to the OTA GB and take it in for service.
Sent from my PG06100 using XDA Premium App
Did the rooted update to GB and it seems to have gotten rid of the phantom touch issue. I ended up having to do a factory reset when I did it, so maybe that helped. Glad I don't have to deal with customer support now. There always seems to be a line when I go in.
Sent from my PG06100 using XDA Premium App
cachorropedorro said:
I had a weird issue where an area (the left side of the screen 2mm strip) on the touchscreen didn't work at all. I used the one zip RUU back to stock and brought it in and they gave me a new slider (whole top portion). Just happened 2 weeks ago.
Click to expand...
Click to collapse
Just want to say you're not alone, this happened once temporarily on my G2. It made pressing the "s" and "a" keys on the on-screen keyboard almost impossible!
litterally out of the blue about 2 days ago, the 4 capacitive buttons on the front simply do not respond to touch...
and EVERYTHING else is working fine, keyboard, display, trackpad, everything else is working w/o a problem...
the lights behind the buttons come on, but no response when pressed...
its currently running Unity 1.27 (since released)
ive tried the patch via CWM to remap the keys to no avail... i am going to try and get into titanium to run a backup of apps, then wipe and flash version 1.31 of unity hoping its a software issue...
the closest thing i found to my issue (DZ related) was an issue with the light sensor causing the backlght to act up, but that isnt whats going on here, so as of now im at a total loss...
any help or direction would be greatly appreciated...
Ok, I wiped, flashed and installed 1.31 and same thing... Crap it has to be HW related then...
Ideas?
Sent from my MB860 using XDA Premium App
johng75 said:
Ok, I wiped, flashed and installed 1.31 and same thing... Crap it has to be HW related then...
Ideas?
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
If you are sure its hardware related, then try to unroot your phone and see if you can get a replacement from your carrier.
Sent from my HTC Vision using XDA App
You need to buy them and replace them. They come as a set with microphone and vibrator attached. Very cheap on ebay. Middle plate has to be separated from glass to get to them.
Sent from my SGH-T959 using XDA App
evilcuber said:
If you are sure its hardware related, then try to unroot your phone and see if you can get a replacement from your carrier.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
only reason im leaning towards HW is because i already reflashed, and wiped the phone, and they still dont respond...
only problem is,im in FL-USA, and this came from canada... lol
buttons can be bought on ebay huh?
EDIT: would this be what im looking for?
http://www.ebay.com/itm/BUTTON-TRAC...232?pt=LH_DefaultDomain_0&hash=item3cb6a583b8
EDIT: wouldnt i be lookking at getting a digitizer? but if that were bad wouldnt i have more areas besides jus the buttons none responsive?
Can anyone help clarify the part I should be looking for?
Our even have other ideas I could test?
Thank you-
Sent from my MB860 using XDA Premium App
Yes? No? Maybe?
Can anyone help clarify the part I should be looking for?
Our even have other ideas I could test?
Curiously enough, my four capacitive buttons (apps/menu/back/search) have stopped working too
I take good care of my phones
HTC CRAP ??
I'll find out...
I replaced both parts... Back to working condition
Sent from my MB860 using xda premium
And what to parts were those? I have the same issue. The button trackpad flex cable and digitizer were bad?
thanks
hey guys, my friend just got a MT4G, non rooted (no interest in rooting ).
and he was "showing off" to me today when his hardware buttons suddenly stopped working. only the trackpad worked when he scrolled using it. all the rest of the buttons stopped working
finally i had to do a battery pull and reboot.. not sure if that fixed the issue (class was starting lol). i'll ask him again on monday.
but just wondering, has any of you guys encountered this issue before?
he's got S-On, and the stock gingerbread 2.3.4.
Haven't heard that about the hardware? I have heard about stock froyo randomly deleting all text messages tho.
Sent from my HTC Glacier using XDA App
Kinda, the back button on my phone gets stuck sometimes to the point where I can't push it/use it.
Sent from my HTC Glacier using xda premium
Build quality on the mt4g was never the greatest.
My home button stopped working, so I sent my phone to HTC to have it repaired.
option94 said:
Build quality on the mt4g was never the greatest.
Click to expand...
Click to collapse
yup totally... but still, it's pretty weird... that's never happened to any of the three MT4Gs my family own.
saranhai said:
yup totally... but still, it's pretty weird... that's never happened to any of the three MT4Gs my family own.
Click to expand...
Click to collapse
Yea, I have the white one & my physical buttons suck. My back & other buttons often get stuck & my power button feels pretty loose. My battery door is also a little rickety. My boyfriend (i'm a girl, btw) has a black one & his buttons are much better, no sticking, no looseness. Kinda a crapshoot with these phones...
Sent from my HTC Glacier using xda premium
cbutt said:
Yea, I have the white one & my physical buttons suck. My back & other buttons often get stuck & my power button feels pretty loose. My battery door is also a little rickety. My boyfriend (i'm a girl, btw) has a black one & his buttons are much better, no sticking, no looseness. Kinda a crapshoot with these phones...
Sent from my HTC Glacier using xda premium
Click to expand...
Click to collapse
haha really? i would've thought a girl would've chosen a better name
lol no offense intended
Yea it's the first four letters of my last name, so no offense taken...
Sent from my HTC Glacier using xda premium
I got a Ballistic SG case today and installed it on my phone. After a few hours of using it, the power button mysteriously stopped working. I was able to make it so the volume button unlocks it, but now I can't lock the phone and have to battery pull to turn it off (and it just turns back on, as if the power button is perma-pushed). Does anyone know what i can do about this? Does this seem like a hardware malfunction? Should I not use the case? Thanks for any help
Same case mine is fine.
Sent from my Nexus S 4G using xda premium
does it work if you take off the case
shrekdaklown said:
does it work if you take off the case
Click to expand...
Click to collapse
nope j:
Same case for almost a year....never had a problem
Sent from my Nexus S 4G using xda app-developers app
Best case ever
Tried many cases in the past and the Ballistic Case is the best. Since i purchased it I never have thought about changing cases.
Moecephus said:
Same case for almost a year....never had a problem
Sent from my Nexus S 4G using xda app-developers app
Click to expand...
Click to collapse