Related
WM6.5 on my HD2 (from T-Mobile europe) has finally bothered me enough to decide to change the rom entirely, to android (NAND). I saw the instructions/video tutorial by techburrow (including the magldr v 1.11) and thought that it wouldn't give me too much troubles.
Before starting, I checked my ROM to see if it was recent enough. I as well installed hspl v 2.08 (as shown after taking battery out/in and using volume down + startbutton, in the rgbw screen).
After that I (think I) successfully installed MAGLDR v 1.11. It showed the comment that my phone was now "hacked".
I then went on to the most important step in the process, actually loading android. In the instructions for DFT_Android is states that:
" For installation you need enter MAGLDR (hold power button during boot)"
I tried getting into bootloader by holding the power button, I tried pressing it once and then holding it. Neither worked, both ended up with the HTC logo screen.
All I can do now is choose between getting the HTC logo and the rgbw screen showing hspl 2.08.
Hard reset also doesn't work, probably because MAGLDR deleted the original rom. Connecting through USB via the rgbw screen doesnt work, the connection is not recognised.
Other thread look similar problem, but haven't helped so far. Only the most recent are about others trying to get the android on NAND with MAGLDR 1.11 and DFT-Android.
HELP? Anybody has any idea on how I can install android any ROM now, how to get into the bootloader, how to use my HD2 again?
Looks like Magldr was not flash into the phone. Reflash magldr.
Sent from my HTC HD2 using XDA App
unfortunately
Thx for the suggestion, xhanay. However, reflashing MAGLDR requires an activesync connection and/or USB connection via HSPL (only way my phone does anything). Cannot get any connection unfortunately. So no reflashing.
Any other suggestions? (reflashing via microSD?)
help!i have the really same problem!thx!
This is what I do:
1. Remove the battery, put it back
2. Hold VolDown key pressed while turn on the phone to enter Bootloader (tricolored screen)
3. Connect it to PC and wait for connection to change to USB
4. Flash radio 2.15.50.14
5. Hold VolDown key pressed after reboot to enter bootloader again.
6. Flash MAGLDR
7. Reboot
8. Hold Power button pressed > Select USB flasher ...
....and flash Android/Windows 7.
If USB connection is not recognized I suggest flashing a stock ROM using SD card.
See instructions here, chapter 3 - Flashing Via MicroSD Card
could just work
Thank you for the quick response. Hopefully I will make it all the way to step 8+ (with android and all apps coming along with it). Otherwise using the stock rom should help. Thx for the link.
Will let you know if it works.
Also post in the right section in the future
All worked. I had to reflash a custom ROM through the rgbw screen (apparently a custom ROM did synchronise via USB even though activesync didnt show anything). Then I reinstalled MAGLDR (which immediately sent me through to the bootlader screen). After I had some issues loading android (had to tag USB on in Activesync connection settings, make the connection, the tag USB off in the connection settings)... Now Android is running as I hoped it would. Great work and thanx to all that helped.
ps: Will try to use the right section next time. No promises that it will then be the right one however.
I have the same problem and tried this only to be sent back into magdlr where it just scrolls up and down with the volume key held down.
Any suggestions much appreciated.
dixieuk101 said:
I have the same problem and tried this only to be sent back into magdlr where it just scrolls up and down with the volume key held down.
Any suggestions much appreciated.
Click to expand...
Click to collapse
you could try .... than just plug-it in using activesync and run HSPL3... do not install it...before installing it will put ur phone in bootloader....than exit HSPL3 keep your phone pluged in and just flash wtever....radio,rom...etc....
OR
Press together VOLUME DOWN - DO NOT LET GO! EVER TILL IN BOOTLOADER & RESET RED BUTTON - under batt. metal cover -
after few seconds the tri-coloured screen will appear
load the hard SPL than magledr than rom it works 100%
Same Problem!!!
Hey i have the same problem. Recently I bought this phone off of craigslist. The phone goes to the DFT screen and its on aMAGDLR v1.11. I tried to reset it but it doesnt go to the multi colored screen. I bought a new micro sd but that didnt work. It also cant connect to my computer. There isnt wrong with the charging port because the light goes on when its connected. PLEASE HELP?! I cant go into bloatloader. Is it bricked?
Hi,
I had used HD2ToolKit4.2.0.1.zip and use Wipe option given in the bottom left.
Regards
my volume key not work and now i cant use the bootloader,please
hey anybody here??????????????
now what is soluton for this bootloader nogo
stucked between magldr and dft screen
pls help
now what is soluton for this bootloader nogo
stucked between magldr and dft screen
pls help
Click to expand...
Click to collapse
did you do this with right order?
http://forum.xda-developers.com/showpost.php?p=27057672&postcount=127
Hey people
i have magldr 1.11 installed now i want to put in 1.13 but i cant do that
i have win7 on my PC and when i try to install 1.13 i only have de tricolor screen and cant update
i turn off the phone and press -vol and power on and only boot tricolor screen
can anbody help me?
tks
you need to describe the problem better.
You can flash magldr from bootloader, so long as you have hspl, but I can't tell from your question whether you have tried yet.
Put phone into bootloader, connect to usb.
What spl does it say?
does it say usb at bottom of screen? if no, have you plugged the usb cable in?
when you run the magldr romupdateutility does it giove an error? is it a timeout error or a different error?
are you trying to do it through a front panel USB port? or a usb hub? if so (and try this anyway) when it times out, just run it again, if it times out again, then change ports and run it again,
i have magldr 1.11 and dft version of 30 dec
to install magldr what i have to do?
mateuspt said:
i have magldr 1.11 and dft version of 30 dec
to install magldr what i have to do?
Click to expand...
Click to collapse
ok let's try to be more clear on this.
first, have you done the HSPL? Following that, did you put magldr 1.11 on there? now if you can answer yes to both these questions, the steps are easy.
1. press -vol and power until you get the tri-colored screen. in there, you should see hspl 2.08 with cotulla in the upper portion.
2. if so, then you plug in the USB cord and you will see "serial" change to "USB" (assuming of course you have activsync installed and waiting on a connection)
3. when it links up, then you run magldr1.13 installer... once successful, the phone should reboot.
simple as that
done.
thanks now i have 1.13 but now how i install another version of nand android?
when i boot up with vol- and power only shows tricolor screen
first you need flash cwr 1.3 ,for that you need reboot your phone to magldr via hold power button until magldr menu upears.After that select usb flasher via vol down and green button (call button) confirm.And after that you can flash anything nand android by usb flasher in magldr or cwr.
when i reboot phone it goes to magldr booter without choice it goes for my actual version cant choose anything
You must hold power button untill menu apears!
magldr 1.11 to 1.13
I'm trying to update from magldr 1.11 to 1.13 but every time I run the ROM update utility I get "Error [260]: Connection" & "the Update Utility cannot connect to your PDA phone." I have the tri-color bootloader screen, as well as USB on it. I'm already running a NAND Froyo build, just trying to switch to Gingerbread. I've tried searching this forum & the web for help without any success. Any help would be appreciated, thanks!
Angelo
comp is probably using teh wrong drivers.
first off, try a different usb port, one you havent useed before for that phone. if taht doesnt help, go into device manager when usb is connected, find he device (probably called mobile device or something) right click, choose uninstal, then reboot, reconnect the phone, see if it helps.
samsamuel said:
comp is probably using teh wrong drivers.
first off, try a different usb port, one you havent useed before for that phone. if taht doesnt help, go into device manager when usb is connected, find he device (probably called mobile device or something) right click, choose uninstal, then reboot, reconnect the phone, see if it helps.
Click to expand...
Click to collapse
That did the trick! Thanks so much for your help.
Angelo
Task29 maybe can help you!
Hi All,
I think I'm in big trouble...
Just 1hr ago, I found the files for upgrading HD2 to WP7 on this: aliwaqas.info/download-windows-phone-7-wp7-rom-for-htc-hd2/
I followed all the first steps and got everything set, which means:
•Download the Windows Phone 7 ROM from here and extract its contents to your computer.
•Installed the HARDSPL 2.08. Radio is OK.
•Connect your HTC HD2 to your computer via USB and run ‘ROMUpdateUtility.exe’ from the MAGLDR 1.2 folder which you have extracted earlier. <==== Now here I had everything OK as in the video at first, untill my phone kept showing the starting screen (htc logo in green in white font) it is frozen on this screen and nothing else!
•Plus, i didnt see the on-screen instructions to install MAGLDR on HTC HD2 and there is no option to select 'USB Flasher'
Output: my phone is frozen, no ROM no nothing. and I can't even install from the beginning, as now I cant connect it to the PC by USB. This is serious, it means my phone is no more good.
Please can someone help?
thanks alot,
Yaelha
Did you try holding the vol down button and pressing the power button to enter tri color boot?
Also MAGLDR 1.13 is available install that instead of 1.12
Hi - I'm trying to ugrade to WP7 ROM.
I tried the tri color boot, and figured out that the problem of the white screen is from the radio version.
So i installed now the right Radio version, and MAGLDR is running... I selected the 'USB Flasher' and it is running, till it stopped now with the following message on the black screen:
"USB Flasher mode
Wait USB.... USB".
do you have an idea of what to do next?
Thx
ok its DWI time
all you need to do now is run the dwi in the rom you downloaded and your away....
the message you see is your phone waiting to recieve the rom.
then you just need the activation key......
Coool... it's all installed now...
Ok now that you have the WP7 on HD2... what to do next? i'll try to fetch on the General forum... because i need to synch everything up, and get the 3G configured back (which im struggling to do)...
thanks all,
Yaelha
So i'm pretty new to the HD2, but have flashed various ROMS etc in the past. A friend gave me his HD2 to flash Android onto, and I'm having a few problems with it.
Basically, After trying to install the MAGLDR, the phone will not boot at all. It loads up, and just sticks at the "HTC" screen. I can get into the "tri-colour" boot loader screen by doing Vol-down at startup, but whenever I try to run MAGLDR again the status bar on both the PC and the phone stay at 0%, then it errors out :\.
Any ideas how I can get this back to working? Thanks guys.
Is the phone switching to USB from SERIAL when plugged in at the SPL? Put the ROM on a SDCARD and rename it to LEOIMG.nbh then enter the SPL, it will see the ROM and allow you to flash via SDCARD. You may have a dead usb port on your hands if it's not switching to USB. Also try multiple ports on the computer and multiple computers to confirm this switch.
connexion2005 said:
Is the phone switching to USB from SERIAL when plugged in at the SPL? Put the ROM on a SDCARD and rename it to LEOIMG.nbh then enter the SPL, it will see the ROM and allow you to flash via SDCARD. You may have a dead usb port on your hands if it's not switching to USB. Also try multiple ports on the computer and multiple computers to confirm this switch.
Click to expand...
Click to collapse
Thanks for the speedy reply!
It is switching to USB when plugged in, which is good o guess. When I try to use RUU or task29, it sits at 0% for a while then goes to "Error 262". When the phone switches on (NOT into bootloader) it just sits at the "HTC" screen, and I notice the R, G, D lines are not shown at the bottom of the screen like they used to be.
I don't have an SD with me at the minute, which ROM exactly would I need to place on there?
thanks again
First enter bootloader, if spl doesn't say 2.08.hspl then magldr wont start.
Radio. radio must be a ..50.. of 2.07.50.x or higher or magldr wont start.
Hanging at 0% is either no hspl, or USB error. USB ports in front of PC generally wont work, USB hubs wont work either, ,only use USB ports around back of the PC.
samsamuel said:
First enter bootloader, if spl doesn't say 2.08.hspl then magldr wont start.
Radio. radio must be a ..50.. of 2.07.50.x or higher or magldr wont start.
Hanging at 0% is either no hspl, or USB error. USB ports in front of PC generally wont work, USB hubs wont work either, ,only use USB ports around back of the PC.
Click to expand...
Click to collapse
Guys, thanks so much. I got her to boot into MAGLDR and I *think* I got Clockwork Mod Recovery installed. I can now boot to the MAGLDR screen.
As I don't have the SD card from the phone (or any other SD at the moment), can anyone suggest a stable gingerbread ROM I can flash via USB Flasher? (ie it will need to come with the installer exe bundled right?). I'd prefer stock Android over a Sense ROM if possible, but I'll take whatever I can get
Thanks again!!
Hi all
Newbie. And new to Phone Updates etc.....
Have HTC HD2 on O2. Was attempting to put NAND on it, followed the thread:
http://forum.xda-developers.com/showpost.php?p=11215136&postcount=8
All steps conpleted successfully, but after "Step C: Install MAGLDR"
The MAGLDR113 Rom updated the phone successfully, then it rebooted and is now stuck the O2 screen.
Any help would be appreciated.
what rom did you flash after you installed magldr?
try to flash magldr again
u got hspl 2.08 ?
Do you have the correct radio (2.15.50.14) ?
have you tried pressing the power button on booting?
Flash again winmo 6,5. After that flash HSPl 3.0. Flash radio 2.15.50. In boot screen ( hold power button and volume down) Flasyh Magldr.
I would say invisiblebm is right - reflashing again should help - cause as long as your reacts when you push the power button it is not dead
Hi all. Thanks for info.
Current state is that the phone is frozen at 02 welcome screen. Nothing happens when soft or hard boot.
When you boot holding down arrow I get
PB8110 SS-BC
SPL-3.03.hspl XE
0x05
cotullaHSPL 0x50
Unable to reflash, as the phone doesnt showup to the pc on usb, though the white part of the 4 colours RED/GREEN/BLUE/WHITE does change from serial to USB when you connect to the PC.
Phone shows up as a device "qualcomm cdma technologies MSM"
Is there anything more I can do save for sending back to O2.
Was at version o SPL 1.66.0000
I choose 3.03HSPL
Leo 2.15.50.14.rar contents - Via CustomRUU
The MAGLDR113 113 from the XDA Dev Site
Completed successfully, then rebooted, but didnt come up.
cheers
John
Even thought there is no apparent phone connection, it still connects if it switches from serial to USB. I had the same problem. Mine also said qualcomm techs. But when i reflashed MAGLDR using DAF.exe, it worked fine.
Can you post the link to the downlaod please
Just put the phone in bootloader, connect USB, when says "USB" on bottom of phone screen, its ready for flashing. Ignore the fact the PC doesn't seem to connect, the phrase "get an activesync connection" in the various tutorials is a pain in the arse, (even though it is technically correct.)
Anyway, magldr won't start cos you have the wrong hspl. As you already know because it says so in post 1 of the magldr thread, which you DID read, right? It says magldr will only work with 2.08.hspl, , , you have 3.03.hspl.
Enter bootloader, connect USB, run hspl4, choose 2.08.hspl and reboot, magldr should start.
So what I understud is , that the phone is not connecting to the PC. Try this:
Restart you PC, Go in to bootloader and try again, In most of the cases is some conection error between the devices. It hapen to me many times.
Thanks. Missed the SPL-3.03, rushing to do it. Its now on 2.08 and the loader comes up. Just the flash to do next. cheers
lesson of the day?
Always read the instructions 10 times
very very very true
Thanks to all fro your help btw, since running Nand, and now Gingerbread 2.3.
samsamuel said:
Just put the phone in bootloader, connect USB, when says "USB" on bottom of phone screen, its ready for flashing. Ignore the fact the PC doesn't seem to connect, the phrase "get an activesync connection" in the various tutorials is a pain in the arse, (even though it is technically correct.)
Anyway, magldr won't start cos you have the wrong hspl. As you already know because it says so in post 1 of the magldr thread, which you DID read, right? It says magldr will only work with 2.08.hspl, , , you have 3.03.hspl.
Enter bootloader, connect USB, run hspl4, choose 2.08.hspl and reboot, magldr should start.
Click to expand...
Click to collapse
CHEERS, you were a life saver.