Related
Hi all !
I can't enter the bootloader screen (screen with blue, green and red stripes) by pressing the volDown key after a soft reset. The phone simply boot on the rom and don't let me see the desired screen.
Is someone can help me to retrieve access to the bootloader screen ?
Radio 2.10.50.8
ROM EnergyRom GTX [13th may 2010]
it shuold be as simple as holding down vol key when powering it on...like you are doing.
u really shutted it fully down and powered on again? or just softreseted via software?
I have tested the two solutions ... I also turn off the device for one day and turn it on pressing the volDown key ... the result was the device booting normally !
Fl3eK said:
I have tested the two solutions ... I also turn off the device for one day and turn it on pressing the volDown key ... the result was the device booting normally !
Click to expand...
Click to collapse
mmh.. and if u want to hard reset ur phone? i mean.. when u press both, volume up and down at the start.. does atleast the hardreset screen appear?
No It change nothing ... I really can't access this screen anymore. I try also to upgrade to HSPL 2.X but the issue persists
Oo thats weird.. for what do u need the screen anyway?
i would flash a new rom maybe.. so the prob could be solved that way, but i really dont know if that will help >.<
try it with the battery cover off to get a better press
power off
press and hold and keep holding vol down
press and release power KEEP PRESSING VOL DOWN
only release vol once three colored screen shows.
samsamuel, I flash my HD2 more and more but since I test the radio 2.10.50.XX, the device just boot normaly and it not let me enter the bootloader screen (I keep the volDown key during booting after turn on the device like you said)
Darksorrow, I need to get back to radio 2.08.50 because the 2.10.50 sucks my battery very quickly ... :'( I'll try to flash the device with an other ROM ... with luck It could give me back the access to bootloader ...
the rom can't affect the bootloader in the same way that your installed operating system on your pc can't affect the bios.
even if you wipe the rom completely you can still enter bootloader.
anyway best of luck.
edit - in using same radio as you.
samsamuel said:
the rom can't affect the bootloader in the same way that your installed operating system on your pc can't affect the bios.
even if you wipe the rom completely you can still enter bootloader.
anyway best of luck.
edit - in using same radio as you.
Click to expand...
Click to collapse
Thanks for the information and after flashing I understand that the bootloader still unavailable by pressing down the volume down button ... Is it possible that this was and hardware problem even if volume keys works well in Sense?
Fl3eK said:
Thanks for the information and after flashing I understand that the bootloader still unavailable by pressing down the volume down button ... Is it possible that this was and hardware problem even if volume keys works well in Sense?
Click to expand...
Click to collapse
Its possible, but unlikely.
I dont mean to sound like i dont believe your results, but i cant help the feeling that you arent doing it right.
Every post so far where someone couldnt enter bootloader / start a hard reset has been down to the order of pressing and the length of the press.
Its usually that they are
1 - pressing and holding both power and vol
or
2 - releasing vol down when they release power
or
3 - not pressing vol hard enough (this is where the battery cover off helps, it allows the button to press more firmly.)
or
4 - pressing power before they press and hold vol.
all of which will fail to enter bootloader.
ill repeat the process, just for clarity.
power off the phone
press hold and keep holding 'vol down'
tap and release power BUT keep vol down pressed
release vol down when the three coloured screen appears.
any more than that i cant suggest, sorry.
Here you go. Give this a shot. Run the cab on your device and there will be a shortcut in your start menu to take you to bootloader
It works fine. Thank you.
zelendel said:
Here you go. Give this a shot. Run the cab on your device and there will be a shortcut in your start menu to take you to bootloader
Click to expand...
Click to collapse
Thanks a lot this work for me too !
@samsamuel : I understand the way you explain me Even if I kept the vol down touch after powering the device I just see the device booting on ROM ...
I have one more question, do you think I can perform a format (with MTTY) considering the fact that I can't access to bootloader at startup ? I hope this work but the risk is that I can't never install a ROM after formatting if I still can't access to bootloader by pressing volume down at startup ....
Thanks Zelender, the file works wonderfully. ...and yes, I'm sure I was using correct procedure to enter bootloader as I had done it before.
I have a similar situation, but I have a Nexus One. I know this is not the area for the N1, but this is the only place where someone is having the same issue of not being able to go to the bootloader. I press vol down while hitting power button. This would always give me the boot loader menu, but instead it just boots to the OS.
Any way I can regain access to the bootloader, because my os is messed up and my radio isnt operating.
Thanks
Hum ... I just process an task 29 via MTTY and the result is .... "phone sent for repair" so for those who have the problem, DO NOT EXECUTE TASK 29 or you'll have a blank phone and you'll can't install new ROM.
I can't return to winmo rom.
zelendel said:
Here you go. Give this a shot. Run the cab on your device and there will be a shortcut in your start menu to take you to bootloader
Click to expand...
Click to collapse
I've the same problem as Fl3ek : I flashed a nand android rom with magldr and I can't return to bootloader mode and I can't make a hard reset. The only thing working is magldr but only for flashing nand android roms (i tried 3 of them : they all work ).
Is there an APK like bootloader.cab ? Or a program to flash or activate bootloader in nand with magldr ?
I tried quick boot with bootloader option but it does'nt work.
tried to follow the directions which say to hold down the red and green buttons then push volume down then up then wipe.
when i push the red and green buttons then volume down it take me to the hboot screen and asks me if i want to upgrade.
should i just be holding the red and volume up? then wipe and install the downgrade rom just i would flash a new rom?
need to get this figured out soon. my screen is loosing touch more and more now my home, menu, and back spots are not allways working
You should go to fastboot and flash the Ruu for 2.1.
Sent from my Eris using XDA App
http://www.thefuzz4.net/home/Androi...ris/HowToRollYourRootedErisbacktostock15.aspx
ECLIPS3 said:
http://www.thefuzz4.net/home/Androi...ris/HowToRollYourRootedErisbacktostock15.aspx
Click to expand...
Click to collapse
this is what i'm tryin, but step 2 is what isnt working. when i hold power on and send buttons i get nothing but a upgrade screen.
should i be holding the power on and the volume up to start. then i come to a screen with a wipe setting and i can boot the downgrade zip from there
Could I also downgrade the hboot on a rooted Eris. Would this offer any advantage or disadvantage over the hboot that came with the rooted leak v3 rom?
just go into recovery mode, which i believe is by holding vol up + power, then follow the directions from there.
after flash andriod rom use maglrd 1.11 , i cant boot in to tri color bootloader , i try hold down vol button and power button but alway boot in to maglrd , please help , i need find out how to boot in to bootloader ?
Power off your device and hold "Volume Down" and Power on the device till u get the tricolour screen.
i try that but just boot in to maglrd not bootloader
I've tested it yet and it works for me!??
- Shut down ur device
- press the volume down button (hold down all the time)
- short tap on the power button and release it (still holding volume down)
still the same boot in to maglrd
I think you're holding the power button too long.
Hold down the volume down and press the Power On and release it while still
holding the volume down.
Works for me.
i just tap the power button
same here
I got the same problem I was going to flash a new radio and start over with MAGLDR with a new nand because the call key isn't working since i started using namd versions, last night i spent like two hours trying to get my phone in Bootloader Mode with no luck
hope some one can help
Vol down and power. odds are your not holding it right. If it dont work, then your stuck with Magldr.
Why are you even holding the power button?
To get to the RGB Bootloader:
Turn off Device
Hold Volume Down Button
Turn on Device - DO NOT HOLD the POWER BUTTON
LiFE1688 said:
Why are you even holding the power button?
To get to the RGB Bootloader:
Turn off Device
Hold Volume Down Button
Turn on Device - DO NOT HOLD the POWER BUTTON
Click to expand...
Click to collapse
That doesn't work for me and i can't have a hard reset neither.
I always go back to android.
I just can change nandroid with magldr 1.10 : i can't come back to winmo : android works well but I need some winmo programs.
You sure you doing it right?
You release the power button when the HD2 vibrates but you still hold on to the Volume Down button.
I play with this HD2 all the time, switching from WinMO6.5 to Android SD, and Android NAND, as well as Clockwork Recovery NAND.
If I want SPL3.03, I go into Recovery Mode with leoimg.nbh file.
When I want to go back to Android, I do recovery back to 1.66 to recover back to SPL 1.42 so I can flash back HSPL 2.08
Have not met an issue yet.
Yes i just tap the power button and still just go to magldr
yongh said:
Yes i just tap the power button and still just go to magldr
Click to expand...
Click to collapse
Do you even have HSPL installed???
Yes other why i cant flash to andriod la
Research more stuff
MAGLDR is not boot loader
Bootloader = phone off, volume down + power button
MAGLDR - Phone will be off + hit power - it will turn on in MAGDLR
P.S. If installed correctly
can someone please help me,i installed maglrd 1.11 for install android, when
restart its come up to htc logo in white screen only i can go in to bootloader but nothing i can do,i installed hspl, i dont know wht to do now.
perhaps your volumedown button does'nt work properly.
Take the back off the phone,
take the battery out,
wait for a few seconds,
put the battery back into the phone,
leave the back off the phone, so that you can feel better that you press the volume down button correctly
press power button only once and very briefly
this should work, I had the same problem
Hey guys,
So I've decided to flash my mates hd 2 with win 7.
i downloaded the rom from the forum which has the loader (i think).
i watched the video demo on youtube and followed the instructions there.
when I boot up the phone after rom updater, I can't get into the bootloader! all I can see is htc logo and nothing happens.
What do i do? Have I bricked the phone?
Please help!
emclondon said:
Hey guys,
So I've decided to flash my mates hd 2 with win 7.
i downloaded the rom from the forum which has the loader (i think).
i watched the video demo on youtube and followed the instructions there.
when I boot up the phone after rom updater, I can't get into the bootloader! all I can see is htc logo and nothing happens.
What do i do? Have I bricked the phone?
Please help!
Click to expand...
Click to collapse
With the phone turned off, hold the volume down button on the side of the phone and press the power button. Keep holding the volume down button until you see the tri-colored screen (this is bootloader).
at this point i would suggest you flash task29, enter tri-colored screen again (bootloader), then flash magldr v.1.12, then let the phone boot into magldr, choose option 5 and flash wp7.
Hi,
I cannot get into the tri-colored screen now! thats my problem. I updated HSPL to *.HSPL, and tried updating the rom and this happens!
I have tried the reset method by holding Vol + and - keys with Power button, but that doent help too
how do i used task29 when i cant get past the HTC logo on the phone?
emclondon said:
Hi,
I cannot get into the tri-colored screen now! thats my problem. I updated HSPL to *.HSPL, and tried updating the rom and this happens!
I have tried the reset method by holding Vol + and - keys with Power button, but that doent help too
how do i used task29 when i cant get past the HTC logo on the phone?
Click to expand...
Click to collapse
try soft reset. remove the back cover then press a blunt pointed object such as a pen or stylus into the reset button to the bottom left of the SIM, near sd slot, and release. The phone will then reboot. try to get into bootloader as soon as it restarts
hi, i tried installing the rom again, and i get some cpp error?
dont know why.
i tried reverting back to stock rom, installed it successfully, and now when I unplugged the mobile, it turns off. when i plug it in it turns back on and it loops at HTC logo i mean, I turns itself off and turns itself on.
why do you think this happens?
Hi,
The problem is When I plug in my phone to USB, it boots up shows a HTC logo, with
R 2.06.51.07
G 15.30.50.07 U
D 1.66.76641
written in red on left corner and holds on for a few seconds and turns off, and turns on itself.
end note: the phone only starts when I plug it to USB, else its a brick
I'm trying to get my hd2 to stay on the tri-colored bootloader screen but it quickly goes to a white screen that says "this operation will delete all your personal data, and reset all settings to manufacturer default. Press VolUp to restore manufacturer default, or press other keys to cancel".
Pressing volup and other keys does nothing. I assume this is because I have CWM installed and im using an android rom.
To clarify: I can boot CWM and my android from nand, but I am trying to run task 29 because my rom is messed up and I can't get the bootloader screen to stay. It thinks I'm trying to reset the data but I'm not.... Any help?
jeffrey92 said:
I'm trying to get my hd2 to stay on the tri-colored bootloader screen but it quickly goes to a white screen that says "this operation will delete all your personal data, and reset all settings to manufacturer default. Press VolUp to restore manufacturer default, or press other keys to cancel".
Pressing volup and other keys does nothing. I assume this is because I have CWM installed and im using an android rom.
To clarify: I can boot CWM and my android from nand, but I am trying to run task 29 because my rom is messed up and I can't get the bootloader screen to stay. It thinks I'm trying to reset the data but I'm not.... Any help?
Click to expand...
Click to collapse
Vol down and power button
Thats what I'm doing and it results in what i described in the first part of my post.
ive tried all sorts of button combinations and none work
Throwin this out there but could ur vol+ button be sticking???when u do vol +/- ull get that screen
i did a button test and all the buttons work like they should, except when i press vol up nothing happens but when i press menu it registers both menu and volup
but yeah volup by itself does nothing...
In order to get to the reset screen you must be pushing the Vol Up + Vol Down + Power on. To get to bootloader it is only Vol Down + Power on. Make sure that you press at the bottom end of the Vol button.
Ok so that means my volup is stuck or malfunctioning. Any ideas on how to remedy this?
Apart from getting a service, No. Sorry.