hi all forum member l search this thead but not found any solition this error
l tryed all rom nothing all radio rom nothing task29 (my flash chip samsung) and custom room ,mtty , ....
where do you get this error? what exactly are you trying to achieve?
rom update same error % 8 and this error gold card same hars spl same orginal rom sama all time same error
radio rom update error is %100 and error not succesfully
Richy99 said:
where do you get this error? what exactly are you trying to achieve?
Click to expand...
Click to collapse
thanks your reply
have you installed hspl?
I had the same problem. I was trying to restore my phone to original firmware, due to issues with custom firmwares. I had managed to extract the NBH from the installer provided by my carrier, and used CustomRUU to flash the phone, but the phone was not booting.
I then flashed one of the EnergyROM builds onto my phone.
After that I could not get the original firmware onto the phone, error 290 at 9%.
I booted my phone into the bootloader (red/blue/green), and used HSPL2 to set SPL to 1.42.HSPL. I could then flash the original firmware.
My phone is now working fine, as best I can tell.
thanks for information l trying now l will write here result
same error error 290 invalid command
Related
When i tryed to install WWE version ( i downloaded the install file with code which i get from here because my s/n was invalid ) some VENDER ID problems occurs , how to fix it ?
you need to instal hspl first because that rom is for unbranded phones but your phone is vendor locked.
go read the hspl threads in the rom development section.
there are only 3 possibilities:
1. get the update from your provider and the vendor ID will match
2. get a Goldcard to flash the Rom
3. flash HSPL...
Hi, i really didn't want to start a new thread but i have tried searching and can't find anything.
I've recently discovered the joys (and the curse) of flashing cooked ROMs. I've been enjoying the Energy ROMs but i can't get email to work so i thought i'd try back on stock ROM where it always worked fine before.
I've looked at the guide on how to go back to stock ROM, I've flashed the Stock ROM (Orange UK) and am trying to put the stock SPL (1.14) back but keep getting "Error 208 File Open" when i run the Unsigned Hard SPL that i downloaded from the guide.
(as i understand the guide, i click on the Unsigned HSPL, but before letting it do anything after extracting the files, i replace the SPL version with my Stock version and then allow it to continue)
It extracts the files but i get the error messege and can only Exit.
What can i do?
I think that Stock ROM overwrites HardSPL and at this moment You've got Stock SPL - check in bootloader.
Nope, still on 1.56 OliNex, installing stock ROM installs the stock Radio with it but not SPL.
plz help me ... when i flash winmo 6.5 back ,it error while in progress when enter bootloadter it said upgrade ROM code error ....thx in advance
Did you try flashing a cooked rom? if it does not work, flash with FlashaholicRUU v1.1. It will wipe your phone then install the rom.
Note: Flashing FlashaholicRUU v1.1 will remove Magldr so just reflash Magldr.
Link: http://forum.xda-developers.com/showthread.php?t=722852
me3pheap said:
upgrade ROM code error
Click to expand...
Click to collapse
incorrect stock rom flashed over sd card whilst hspl is installed. hspl is now removed and the rom fails because hspl is gone.
enter bootloader
flash hspl
flash rom (usb)
next time use the correct stock rom.
You can try this as well http://forum.xda-developers.com/showthread.php?t=918698
Stock Rom
Download Your Stock Rom.
If you have T-Mobile USA Go Here: www.tmobile.com/wmupgrade
If not find your stock rom here: http://forum.xda-developers.com/showthread.php?t=623283
Once you download your rom.
Find the Ruu_signed.nbh file, Rename to LEOIMG.nbh
Copy LEOIMG.nbh to your Micro SD Card Root Folder.
Turn off your HD2.
Hold Volume Down while pressing power on your HD2 Flash the File.
Release the buttons when you see the Bootloader or a Loading screen.
Press Power or ...... to flash.
Have any problems contact me.
hi , i did your method didnt work.
i manage to do it once yestarday , however i want to flash NAND android instead of WP7
WP7 is a pain in the head.
mind teaching ? :/
iam searching a hspl for my hd mini to flash a custom ROM
i have a SPL -1.31.0000 and a vodafon branding
i hope anybody can help me
thanks in advance
no, you are not "searching". if so, you would have found this:
How to flash custom ROMs
hi
dont work this DFT-SSPL-MINI
are you can help me?
ERROR [294] : INVALID VENDOR ID
tnx
What are you trying to do ? Update with a stock rom ? Or with a custom rom ? What OS are you using on PC ?
Put sspl and *.nbh file in the same folder and run exe file with phone connected in bootloader
you can only flash "custom" ROMs WITHOUT RADIO in it, OR roms that contain the right radio for your phone!
Hi.
I need your help, I'm trying to flash a Spanish rom but at the end of odin I get the FAIL error. Can you help me?:crying::crying::crying: ,I can't download the rom from sammobile because it's for premiums.The only rom that I don't get the error is the Chinese version, the tablet has always had a Spanish rom.
I have tried with other modified roms and the error has not come out but I only want the rom stock of this tablet, not a modified one.
Thanks
What's the error?