[ISSUE] HD HD2 Won't Boot Android 2.2 - HD2 Android Q&A, Help & Troubleshooting and Genera

Info:
I purchased this phone from ebay and it came today, i turned it on and it all worked fine, however when i took out the battery and put in my simcard it froze on boot and now the phone will not boot up, it just hangs on the HTC Logo at the start.
Problem:
-I am unsure if the Android 2.2 is installed on the simcard on the actual device.
-I have no idea how to get it working
-I tried a hard Reset however it froze when it was resetting
-Phone won't turn on.
I am unsure if its a LEO or what, its has T-Mobile written just under the Speaker.
What i need:
- How do i fix this issue?
- I would like to install Android 2.2 or Android 2.3 Ginger however all the threads are confusing and i have no clue what to do.
All help would be great.

Ok i have figured out what to do however i can't get the HTC HD2 to be recognised by WMDM, it constantly says ' Not Connected'.
Tried different USB Ports,
Tried reinstalling and uninstalling however it just wont work.
I think its because the phones in the mode with the rainbow screen.
Is there anyway around this or am i Stuffed.
I have tried with a few Windows 7 computers and it didn't work on any (((
Please help

What hspl does it say it has?
Sent from my HTC HD2 using XDA Premium App

when u r in the booloader ( rainbow screen ) WMDM wont recogn ur hd2,
just install stock wm 6.5 from bootloader
u can get it from http://forum.xda-developers.com/showthread.php?t=807617
just run the .exe

Hi there,
Yes i have downloaded the Official ROM from T-Mobile.com and entered my IMEI, so i suspect its the correct one.
Tried updating from the Computer and it got to 5% and then said Update Failed. With the error 284 Lost Connection.
I also tried doing it from the SD Card with the leoimg file and that got to about 2 percent and then said Radio error, or something
I'm guessing this should have worked, however it didn't
Cheers

willymanilly said:
Hi there,
Yes i have downloaded the Official ROM from T-Mobile.com and entered my IMEI, so i suspect its the correct one.
Tried updating from the Computer and it got to 5% and then said Update Failed. With the error 284 Lost Connection.
I also tried doing it from the SD Card with the leoimg file and that got to about 2 percent and then said Radio error, or something
I'm guessing this should have worked, however it didn't
Cheers
Click to expand...
Click to collapse
Any ideas?

Did it atleast show any progress bar when loading leoimg.nbh from SD card?
Sent from my HTC Magic/Dream using XDA App

You did install this version of Windows Mobile Device Center? (WMDC)
http://www.microsoft.com/windowsphone/en-us/howto/wp6/sync/installing-wmdc.aspx
And as someone else asked about HSPL version, under Tri-color screen it should say HSPL 2.08 somewhere.

kompheak said:
Did it atleast show any progress bar when loading leoimg.nbh from SD card?
Sent from my HTC Magic/Dream using XDA App
Click to expand...
Click to collapse
Hi there, it showed some progress then said failed.
I have tried flashing a huge amount of versions however none seem to work
Maybe i need to flash a new radio or SPL etc

Don't give up...
Okay I have experience that also... but after countless tries and research, I have the guys on xda help me revive my hd2.
Lets start fresh... tmous or EU? Spl? ... what number... hspl? And what number.?
Sent from my HTC Magic/Dream using XDA App

Related

Probles Falshing A New ROM

Ok, so I went to flash a new ROM on my phone, and when I go to the run the RUU, I get the screen with the 4 steps to complete, which are already completed, then hit next. Now I get "Error [240] : File Open" and below that it says "The Update Utility cannot open the requested file. Please check the update utility."
I tried downloading the Update Utility again, but it still does the same thing. Ive flashed my phone before, and Im pretty sure Im not doin anything different this time, but its not workin. Am I missing somethin?
Thanks
new-b said:
Ok, so I went to flash a new ROM on my phone, and when I go to the run the RUU, I get the screen with the 4 steps to complete, which are already completed, then hit next. Now I get "Error [240] : File Open" and below that it says "The Update Utility cannot open the requested file. Please check the update utility."
I tried downloading the Update Utility again, but it still does the same thing. Ive flashed my phone before, and Im pretty sure Im not doin anything different this time, but its not workin. Am I missing somethin?
Thanks
Click to expand...
Click to collapse
Check if your harddrive isn't full.
A RUU extract some files, and if your harddrive is full it can't
Nope, its not full. Far from it actually lol.
new-b said:
Nope, its not full. Far from it actually lol.
Click to expand...
Click to collapse
flashing trough sd-card?
im having the same problem i get the error code as well, is it possble to flash from the microsd. I am a nooby at this and understand how to flash.
xmoo said:
flashing trough sd-card?
Click to expand...
Click to collapse
Nope, win mo device center.
WeaponX2010 said:
im having the same problem i get the error code as well, is it possble to flash from the microsd. I am a nooby at this and understand how to flash.
Click to expand...
Click to collapse
Its in the tutorial, but I havent tried it yet. Ive never had a problem flashing through the USB before.
Tried it from the SD card. Went great. Just takes a little longer.
Still open to suggestions about usin active sync though.
xmoo said:
Check if your harddrive isn't full.
A RUU extract some files, and if your harddrive is full it can't
Click to expand...
Click to collapse
Hi xmoo. Can YOU please help? With this:
leo70 said:
URGENT MAJOR HELP REQUIRED *PLEASE*:
I am stuck on DFT boot screen (after doing 1234-vol up_down-wp7-reset) and this is *after* (wp7 here !) all the chains b4 that are done: ie: power on, hspl, htc, magldr- for windows phone 7 on hd2. Sometimes get thru to windows phone 7. but generally reboots. Done spl back to stock and leoimg on sd back to stock and tried task28s, 29s, etc but just reboots constantly and randomly.
Any thoughts here? What is warranty process? DO they replace at all with NEW? or new BOARDS/RAM? Gone back to 1.66 spl and sent in for repairs. because - the stupid recommended Romupdateutility HTC stock rom 'upgrade' did this damage. yes, was Windows Phone 7 and activated using dev hack with marketplace & xbox/live. Also - although I activate ok and can use it on market fine once it boots good - still when both my hd7 (hd2) and Mozart are signed into XboxLive using same address at same time: (mozart is legit fully/eula-signed etc) then the hd2 seems to reset a LOT here at this point. maybe this has something to do with usual xbox-live security? ie: http://www.wpcentral.com/hack-xbox-live-windows-phone-7-get-perma-banned-microsoft ?????????? please hlp me - I am fully capable of mtty, sd-leoimg, whatever it takes- but need to know why this would be the case? same with Android roms/stock too. Anyone know about task2a on hd2? how many bad blocks I should have? partition/re-partition droid or wp7 to avoid these bad blocks? I just WISH Cotulla/DFT let you run the windows phone 7 installer in such a way that all bad bloks could be excluded totally as if the never exist... ie make hd2 clean.
Click to expand...
Click to collapse
note: although I have gone bak to original spl+rom in past I have (both unsuccs &succesfully) have previously done task2a and even spl-mfg install and radios/roms as DEBUG/SPL-MFG. xmoo?

[HELP NEEDED] Stuck in white bootscreen with no connection

Hey all,
Maybe someone can help me out.
Two weeks ago i installed andoid on my HTC HD2.
I used HPSL, radio 2.15.50.14, MAGLDR112 and NexusHD2-Gingerbread_V2.1_NAND. A few days ago, without any reason i got a white bootscreen and i still have it
What a did so far:
* New HSPL3, but the radio didn't connected anymore, error 270.
* A new MAGLDR, i reached 100% in a blink, but then an error 270.
* Using a SD with the original leoimg, i get a (00018003 radio fail) error after a few % and the update failed.
* task29, but again no connection. (after 5 min error 262)
* new USB drivers installed for windows 7 and i also tried it on an windows Xp computer.
So far i only reached my 4 colored screen with:
PB81100 HX-BC
SPL-2.08. HSPL 8G XE
0x05
CotullaHSPL 0x30
* The original rom was RUU_Leo_S_HTC_NLD_3.14.404.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
Last question, how can i check that the batttery is stil oke for flashing.
Anyone who has a clue what to do?
Thanks in advance.
greetz!
Rob
Mate, I think you´ve done everything. HSPL and Radio ROM versions correct etc.
Since I see more and more people reporting similar problems like you, I get the feeling that some Android builds might have some strange effects on Radio ROMs.
There are too many people with SPL and Radio ROM problems, eg. stuck in bootloader or at the white startup screen.
This didn´t happen at this pace before Android NAND.
Only 1 question though:
Did you try to flash the original ROM using RUU.exe, SSPL or LeuCustomRUU via USB, without having the SIM and the SD card inserted? In rare cases, either one or both were trouble makers...
EDIT: Second question:
What kind of SD card did you try? Bigger cards seem more problematic, too.
I used a 2 gb micro SD card to go back to the original Rom.
I didn't tried to go back to original ROM using USB, because of the connecting problems. So that i'm gonna do now. Any suggestions which to use best?
After your post i tried to the flash with (and without) the formatted sd and the simcard, unfortunatelly i didn't work.
For last your question i can say that connect your phone to PC when it is off. Then keep down "volume down" button and switch on your phone. You get 4 colored screen. On bottom you can see USB word. Let phone for minimum 1h. And you get more 50% charged battery.
After hour you can flash back to original rom or to MAGLDR and forward normally flash android nand. You dont need disconnect or switch off before flash your phone.
Hope helps.
@tictac0566
Thanks for the options!
I tried the options mentioned in question 1, the problem is the connection USB/Radio. SSPL seems to work, but after 1% again connection error.
After a few test it must be the radio.
I tried to flash only a new radio using LEOIMG, after 99% i get the same error as LEOIMG an original Rom (00018003 radio fail)
With HPSL3_PKG i also can't go back to SPL 2.08.000.
So the problem must be there.
Anyone has an idea?? Can i use another radio? If yes, than which?
Thanks!
Still no solution
Tried many things, still the radio is not working.
It could be also HPSL3, because i can't go back to spl 2.08 (or any other (h)spl with the app.
Anyone has an idea??
Just trying to help here, but have you tried doing everything from the start?
task29 and everything else?
Hey i seem to have the same problem as you except my white screen wasnt after a flash, it just randomly went white one day and wouldnt boot.
I have tried MTTY, i can connect via usb but after formatting via MTTY and then attempting to flash a new rom (ship and custom) it just stays on 0% and doesnt do anything else.
Sorry to hijack thread just thought whilst people are looking they can help me too
CrAzYiaN said:
Just trying to help here, but have you tried doing everything from the start?
task29 and everything else?
Click to expand...
Click to collapse
Yes i did, this thread is official mine
It must be the radio or else HSPL3_PKG.
Do you have some options??
Thanks in advance!
tomar5e said:
Hey i seem to have the same problem as you except my white screen wasnt after a flash, it just randomly went white one day and wouldnt boot.
I have tried MTTY, i can connect via usb but after formatting via MTTY and then attempting to flash a new rom (ship and custom) it just stays on 0% and doesnt do anything else.
Sorry to hijack thread just thought whilst people are looking they can help me too
Click to expand...
Click to collapse
Can you go into bootloader? If you can then your problem can be solved. The problem you are having might have been because you unintentionaly installed or uninstalled a programm and that corrupted your rom.
To both of you. Try to flash using the leoimg.nbh step. If it doesn't work then the rom you used is not compactible with your device, try another till you find one that will work with your device. I know it is tiring to do something like that, here a tip from me, the rom you are expected to use in this process must be in the native language of your phone or else it will not work. You can't just use any stockrom to do it. I hope it helps.
Abdul9. said:
Can you go into bootloader? If you can then your problem can be solved. The problem you are having might have been because you unintentionaly installed or uninstalled a programm and that corrupted your rom.
To both of you. Try to flash using the leoimg.nbh step. If it doesn't work then the rom you used is not compactible with your device, try another till you find one that will work with your device. I know it is tiring to do something like that, here a tip from me, the rom you are expected to use in this process must be in the native language of your phone or else it will not work. You can't just use any stockrom to do it. I hope it helps.
Click to expand...
Click to collapse
Thanks for the advice, but all the roms i tried i got a radio fail during flashing with leoimg.nbbh.
Maybe your HSPL is faulty ? Did you try to re-HSPL your device using HSPL.exe ?
kawazaki said:
Maybe your HSPL is faulty ? Did you try to re-HSPL your device using HSPL.exe ?
Click to expand...
Click to collapse
Yes i tried, but mine HD2 stays on SPL-2.08 HPSL.
I used HSPL3_PKG and HSPL2 in different but still SPL-2.08 HSPL.
Maybe there's where my problems are, but i als can be an corrupt radio.
Anyone an other way to back to SPL 2.08.000 or how to fix the radio?
Then your best bet is to flash with a goldcard
Abdul9. said:
Can you go into bootloader? If you can then your problem can be solved. The problem you are having might have been because you unintentionaly installed or uninstalled a programm and that corrupted your rom.
To both of you. Try to flash using the leoimg.nbh step. If it doesn't work then the rom you used is not compactible with your device, try another till you find one that will work with your device. I know it is tiring to do something like that, here a tip from me, the rom you are expected to use in this process must be in the native language of your phone or else it will not work. You can't just use any stockrom to do it. I hope it helps.
Click to expand...
Click to collapse
Yes i can get into bootloader. I have tried using MTTY task 29 to format the device then i searched on the HTC site for a compatible ROM. Turns out the only one that doesnt give a negative response when i type in my serial number is the ROM from Taiwan. Tried flashing that using the SD card method and the USB method. Sd card method hangs at 0% and i get a connection error in USB method. I have also tried the latest ROM from Dutty.
If a ROM is not compatible how do you know? Does it hang at 0% or does it finish loading and then wont boot from there.
I have even tried flashing just a radio with the same results.
kawazaki said:
Maybe your HSPL is faulty ? Did you try to re-HSPL your device using HSPL.exe ?
Click to expand...
Click to collapse
Yes i tried all different types of HSPL and even SSPL. From the bootloader screen i run the .exe from the computer and it goes through and says 'operation finished successfully'
But when i get back to the bootloader it still says the same HSPL, which is 1.66
Also to note when i power on the device i can hear a small 'click' from it. Could be much worse and be a hardware problem?
Still no solution.
Oke guys, thanks for answering my threat so far!
Still trying to get my HTC back to life.
Is it possible that my problem is in HSPL? (see attachments)
After the white screen i tried to reinstall HPSL 2, 3 and 1, but during the instal my HTC reboot (without the signal "We Hacked It"
I also tried different SD card for LEOIMG, still radio fail 00018003.
One thing i didn't tried is using a goldcard, i downloaded the app but i need a working HTC HD2 to make the card.
Anyone?
No you don't, there you go :
http://forum.xda-developers.com/showthread.php?t=874304
Goldcard is the old method to install a custom rom way before HSPL became popular
so if HSPL don't work then Goldcard wont as well but hey you can still try
I think its more of a hardware problem now since all attempts for software repair is not successful. I had the same situation as yours, white screen then radio fail, tried all solutions but still no luck
sameeeeee
i have the same problem 100%
i already try all these solution and no one is worked
however, some one told me that maybe the problem with the Flash memory of my HD2 because he already try to solve / or already solve such problem "but unfortunately he lost the tools he was used"
this tools is can check the memory and told which memory chunk is corrupted
please if any one know this tools or had it please posted it on.....
That app should be Task 29.

[Q] Need Help - Android snag

Hi all - I'm in a bit of trouble.
Tried changing the OS to Android and must have made a mistake somewhere along the line.
Was using ROM update utility MAGDLR V1.13 and got as far as updating the ROM Was told that the screen should go black and if it didn't, then I needed to perform a reset.
I did this and now the screen just shows the htc logo on white background.
Irish phone - got it august '10. recently upgraded ROM from HTC site to version 3.14.405.2 but not sure now whether I've wrecked it completely.
Was just sick of WinMo and wanted a change - can anyone help please?
ND
boot into bootloader and start again. do you have hspl? right radio?
get into bootloader. flash magldr. then flash nandroid.
you probably need to downgrade the rom to get to hspl 2.08
Thanks - I got the correct HSPL and installed it on the phone, that part was fine. The problem now is that the handset isn't even acknowledging when it's plugged in. And when I connect via USB, the computer isn't registering any connection to it.
I think it's toast! The only thing I can see is a white background with green htc lettering i.e. welcome screen
Thanks for getting back to me, any other ideas?
Will I be able to reload original windows back on by myself?
Try windows 7 XP sucks doing this kind of stuff
Sent from my Nexus One using XDA App
ndonovan said:
...The only thing I can see is a white background with green htc lettering i.e. welcome screen...
Thanks very much for the response. As above, the handset is completely unresponsive - it's not even showing a "charge" when plugged in.
Any help greatly appreciated
Many thanks
Signed,
Cracking up
Click to expand...
Click to collapse
Can you get to bootloader?
(power on while holding vol. down)........
If so, get to bootloader then connect via usb. The word serial at the bottom of the screen should change to USB. This sometimes takes a few minutes (for me anyway)
Once it reads "USB" flash a WM6.5 Rom in the usual way.......
If you cant get to bootloader then theres a good chance you've somehow borked your device......
Thanks everyone and in particular jsmmcabe and conantroutman
I got into bootloader and I'm trying to reinstall the windows os from there.
will let you know how I get on,
thanks again guys - lifesavers
I should have mentioned that flashing a stock 6.5 rom will wipe HSPL.
If you flash a stock rom then you will need to reinstall HSPL before attempting any MAGLDR/NAND shenanigans... (sheNANDigans?? see what I did there )
If you flash a custom ROM from XDA then your HSPL will be ok......
Also should have mentioned the age old "NO .51. radios on a tmous" advice.........
Good luck.......
Well after all of that I went to Pirate Bay, downloaded an Android 2.2 file, copied it onto my SD card and ran it.
Hey presto, I have an Android Phone!
I cannot begin to tell you how much better it is. It's fast, it doesn't freeze, the whole interface is much cleaner and easier to use.
SNAG ITEM:
Tried doing the same with a friends phone and when activating the copied files from the SD card, the thing just hangs and I have to reset the phone.
Any idea why it worked on mine and not his?
Same phone, bought in Ireland, a week apart. Different mobile operator networks though..... I'm Vodafone, he's O2 - weird, no?
ndonovan said:
Well after all of that I went to Pirate Bay, downloaded an Android 2.2 file, copied it onto my SD card and ran it.
Hey presto, I have an Android Phone!
I cannot begin to tell you how much better it is. It's fast, it doesn't freeze, the whole interface is much cleaner and easier to use.
SNAG ITEM:
Tried doing the same with a friends phone and when activating the copied files from the SD card, the thing just hangs and I have to reset the phone.
Any idea why it worked on mine and not his?
Same phone, bought in Ireland, a week apart. Different mobile operator networks though..... I'm Vodafone, he's O2 - weird, no?
Click to expand...
Click to collapse
Could be its not booting because of an incompatible radio....
must be above 2.08.50..... you can find this info in settings about phone...
Also, why download android from the piratebay???
Everything android related you could possibly need is here on XDA.
Personally Id be suspicious of anything from a site like that. Theres no way of knowing whats in that Rom. I would change to a well used and trusted build from XDA if I were you.
Theres no exact science to getting this running on different phones, what works for one may not work for another......

[Q] HyperdroidGBX v11 big problem

Hi Guys, i have just followed the Video for this step by step, all went well at first, right up till the check that the spl had updated, which it did ok,.
Removed the battery as in the video, replaced it, turned on and great went back into windows mobile fine.
Plugged in usb again, went into DFT_LEO_MAGLDR113_DAF folder, ran the update utility as in the video, program said it was updating, screen on hd2 changed from the rainbow screen to HTC with progress bar underneath, went on for yes about 10min with no progression showing on the bar, Then up pops an error 262 message.
I am stuck, i have downloaded a stock image from HTC tried to write it and get the message 262 again and do not know where to go from here so would like some help now if possible from you guys.
Thank you.
Jim
Did you flash HSPL 2.08 before ?
http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1894
Yes i did i followed the video completely, i tried to use 2.08 also when trying to get my phone back to stock but it would not work, in the end i flashed with
(i think) 3.03, this did allow me to go back and write the stock rom back on my HD2, so well pleased about that, but alas i am still stuck with WM and i am used to using an old G1 android phone, so really wanted android on my HD2.
Thanks
You can install it from your sd card. Just rename the .nbh file to leoimg.nbh and boot on the bootloader. That will be easier!
Sent from my HTC HD2 using XDA App
Hi guys, well have decided to go with "SuperRAM_FroYo_V1.5" on to the sd card and everything, yes everything is working very well.
Thanks for your input.

[Q] Device bricked? pink circle boot

Hey there,
I've been using Nandroid for several months now so I thought I have seen a lot problems flashing and booting and stuff, but today I've been running into problems out of nowhere.
My HD2 lay silently on my desk during a meeting and when I came back it was turned off. Now I can start it but it only shows the pink/magenta circle and nothing more. I tried reflashing Magldr/HSPL/Radio etc. via USB and SD Card Flash but everyhting is erroring out. Via SD card flash of the stock rom it errors during the flash of the radio rom.
Is my device bricked? I'm greatful for any help because I don't know anything else to do. With HSPL on the device my warranty will probably not be helpful in any way .
thanks,
Neo
It wouldn't if just bricked its self Have you tried a task 29? I've never heard of the pink circle, you just seemed to of missed the task29
Sent from my HTC HD2
After the task29 try installing stock ruu from fastboot this should fix it
Sent from my HTC HD2
Use a clean SD that you know works with out any errors and make sure your ruu is named leoimg.nbh
Sent from my HTC HD2
Hey,
thanks for your answers so far.
Here are some photos of the errors after flashing by SD card method.
And my ping circle
Have you tried task29 then flash just the radio on its own
Sent from my HTC HD2
Have been running task29 few hours ago..can't remember the error. It's now running at 0% since 5 minutes
edit: and now it had a error 262
This thread: http://forum.xda-developers.com/showthread.php?t=618084 could be intersting for you. On page 7 post #68 the OP found an sollution to solve this. Another user in this thread had the same problem and was able to fix this by trying to reflash HSPL.
Good luck!
- Reflashing HSPL says succeeded but does not do anything.
- flashing from an XP machine does not work either
Can anybody lead me in the right direction for a goldcard flash? the revskills website does not seem to offer goldcards for our leo anymore
Holy Sh*t I thought I was the only one this happened to. I'm on TMOUS running coredroid 1.6 and on day my hone was fine. Had it its case and when I pulled it out to make a call it was on the boot screen. Got another phone so now I have this paperweight. Ive tried task 29, reinstalling the HSPL rmeoving the boot screen and nothing. Ive even reinstallled Winmo and still nothing. Would be interesting if I found a solution. Can still get a nice penny for our phones..
@bx10r:
at least that means that I'm not going insane and my phone maybe really doing things on its own ^^.
Task 29 directly through MTTY also didn't work. I'll try to see if I can change the phone under warranty.
If that does not work I think I'll try this website:
http://www.gsm-technix.de/shop/prod...585-boot-repair-bootloader-reparatur-unbrick/
Has anybody from Germany tried this yet?
I thankfully got a new device unser warranty. Thanks anybody
Sent from my HD7 T9292 using XDA Windows Phone 7 App

Resources