[Q] Device bricked? pink circle boot - HD2 Android Q&A, Help & Troubleshooting and Genera

Hey there,
I've been using Nandroid for several months now so I thought I have seen a lot problems flashing and booting and stuff, but today I've been running into problems out of nowhere.
My HD2 lay silently on my desk during a meeting and when I came back it was turned off. Now I can start it but it only shows the pink/magenta circle and nothing more. I tried reflashing Magldr/HSPL/Radio etc. via USB and SD Card Flash but everyhting is erroring out. Via SD card flash of the stock rom it errors during the flash of the radio rom.
Is my device bricked? I'm greatful for any help because I don't know anything else to do. With HSPL on the device my warranty will probably not be helpful in any way .
thanks,
Neo

It wouldn't if just bricked its self Have you tried a task 29? I've never heard of the pink circle, you just seemed to of missed the task29
Sent from my HTC HD2

After the task29 try installing stock ruu from fastboot this should fix it
Sent from my HTC HD2

Use a clean SD that you know works with out any errors and make sure your ruu is named leoimg.nbh
Sent from my HTC HD2

Hey,
thanks for your answers so far.
Here are some photos of the errors after flashing by SD card method.
And my ping circle

Have you tried task29 then flash just the radio on its own
Sent from my HTC HD2

Have been running task29 few hours ago..can't remember the error. It's now running at 0% since 5 minutes
edit: and now it had a error 262

This thread: http://forum.xda-developers.com/showthread.php?t=618084 could be intersting for you. On page 7 post #68 the OP found an sollution to solve this. Another user in this thread had the same problem and was able to fix this by trying to reflash HSPL.
Good luck!

- Reflashing HSPL says succeeded but does not do anything.
- flashing from an XP machine does not work either
Can anybody lead me in the right direction for a goldcard flash? the revskills website does not seem to offer goldcards for our leo anymore

Holy Sh*t I thought I was the only one this happened to. I'm on TMOUS running coredroid 1.6 and on day my hone was fine. Had it its case and when I pulled it out to make a call it was on the boot screen. Got another phone so now I have this paperweight. Ive tried task 29, reinstalling the HSPL rmeoving the boot screen and nothing. Ive even reinstallled Winmo and still nothing. Would be interesting if I found a solution. Can still get a nice penny for our phones..

@bx10r:
at least that means that I'm not going insane and my phone maybe really doing things on its own ^^.
Task 29 directly through MTTY also didn't work. I'll try to see if I can change the phone under warranty.
If that does not work I think I'll try this website:
http://www.gsm-technix.de/shop/prod...585-boot-repair-bootloader-reparatur-unbrick/
Has anybody from Germany tried this yet?

I thankfully got a new device unser warranty. Thanks anybody
Sent from my HD7 T9292 using XDA Windows Phone 7 App

Related

HD2 stuck at white boot screen/ can't install Roms

Hi guys, I've a problem with my HD2 and maybe one of you has an idea of how to fix this, because I really don't want to send it in for a repair
Anyway, my phone decided to refuse to boot out of nowhere. When it happened I had Artemis v9 or v10 installed on it. The funny thing is that I didn't flash anything when the problem occured.
Whenever I start the phone I only get a white screen. Luckily, I can still access the bootloader, even thought that didn't help me until now.
my guess is that the Radio is somehow corrupted, because when I try to flash a new one I get the error saying "Radio_V2 failed" and "Update Terminated". Not even flashing with task 29 works, because I get a "Error 270" and the phone restarts itself after like 4% of flashing.
I'm really out of ideas, I tried to flash a lot of different roms and radios, even the rom that the HD2 came shipped with.
flanders3 said:
Hi guys, I've a problem with my HD2 and maybe one of you has an idea of how to fix this, because I really don't want to send it in for a repair
Anyway, my phone decided to refuse to boot out of nowhere. When it happened I had Artemis v9 or v10 installed on it. The funny thing is that I didn't flash anything when the problem occured.
Whenever I start the phone I only get a white screen. Luckily, I can still access the bootloader, even thought that didn't help me until now.
my guess is that the Radio is somehow corrupted, because when I try to flash a new one I get the error saying "Radio_V2 failed" and "Update Terminated". Not even flashing with task 29 works, because I get a "Error 270" and the phone restarts itself after like 4% of flashing.
I'm really out of ideas, I tried to flash a lot of different roms and radios, even the rom that the HD2 came shipped with.
Click to expand...
Click to collapse
What radio (if any) have you flashed? Check the ROM's dedicated thread you want to flash and see if the radio is compatible.
Im betting you've flashed the wrong radio
take the rom it was shipped with, name the nbh file to LEOIMG.nbh, copy it to your sd card and go into bootloader.
it will flash your old rom and should overwrite the old radio.
DN41
I installed Radio 2.06.51.07, which was recommended as far as I know.
I tried to install every "official" rom that I could find, but no matter if I apply them via SD card, USB or .exe, the install never finishes.
Tried to install just the OS without a radio and that worked, so I'm almost sure it is somehow radio related.
Now the problem is that I can't even send it to T-Mobile, because I there is no way to get rid of HSPL. BTW, it's the german T-Mobile we are talking about, not the US one. Is there a chance they won't notice the HSPL...?
so flash this one over sd-card: german t-mobile 1.72
what about performing hardreset? does the phone boot?
DN41
Tried flashing the TMO rom, but no luck either
Hard reset is strangly fast (only takes like 7 seconds) and only gives me a white screen after reboot. Apperently the HD2 shows me that HSPL is intsalled in the bootloader, but I can't change the SPL...
Already tried HSPL2, but no matter what option I choose, my bootloader always stays at 1.42 HSPL.
Edit: I would like to post pics of the error I get when flashing from the sd card or the bootloader screen, by the board rules don't want new users to post links.
djchubbs said:
Im betting you've flashed the wrong radio
Click to expand...
Click to collapse
any way to repiar radio side as flashed wrong radio ??
flanders3 said:
Tried flashing the TMO rom, but no luck either
Hard reset is strangly fast (only takes like 7 seconds) and only gives me a white screen after reboot. Apperently the HD2 shows me that HSPL is intsalled in the bootloader, but I can't change the SPL...
Already tried HSPL2, but no matter what option I choose, my bootloader always stays at 1.42 HSPL.
Edit: I would like to post pics of the error I get when flashing from the sd card or the bootloader screen, by the board rules don't want new users to post links.
Click to expand...
Click to collapse
same happen with me,,,
flanders3 said:
Hi guys, I've a problem with my HD2 and maybe one of you has an idea of how to fix this, because I really don't want to send it in for a repair
Anyway, my phone decided to refuse to boot out of nowhere. When it happened I had Artemis v9 or v10 installed on it. The funny thing is that I didn't flash anything when the problem occured.
Whenever I start the phone I only get a white screen. Luckily, I can still access the bootloader, even thought that didn't help me until now.
my guess is that the Radio is somehow corrupted, because when I try to flash a new one I get the error saying "Radio_V2 failed" and "Update Terminated". Not even flashing with task 29 works, because I get a "Error 270" and the phone restarts itself after like 4% of flashing.
I'm really out of ideas, I tried to flash a lot of different roms and radios, even the rom that the HD2 came shipped with.
Click to expand...
Click to collapse
I have exactly the same problem.
I believe radio hardware of my HD2 has failed.
This is not related to flashing an incompatible radio, as I have flashed 1.66 official ROM about three months ago and had no problems until now.
I got the white screen, when phone was in my pocket.
Not possible to update radio, update fails with "Radio_V2 failed" and "Update Terminated".
Not possible to flash any rom, flashing fails when it comes to radio part.
MTTY didn't help as well.
I see no way but to send it back for repair.
Hope they dont realize HSPL, as it is also not possible to change SPL right now.
Hi everybody, i am facing the same issues with my knew HD2. The fact is that i received it yesterday, while trying to flsah ENERGY ROM ..i flashed also the radio .. now got the white screen with the HTC green logo, and no way to hard reset ... phone doesn't boot, can't do anything !!!!!! volume + and volume - doesn't work !!! any idea any solution ?? I am about to try flashing with the memory card but no idea if it will work, im not sure cause even the HSPL doenst appear ... anu idea ?
I've got the same problem
Mine is a Telstra (Australian) HD2, and I've been using it for about 3 weeks fine. Then a few days ago, I took it out of my pocket, and it's dead. With my one, most of the time I just get a blank screen (no HTC), and most of the time it's slightly yellow.
I'm having the exact same problems, and have done everything suggested on this page, and others. I can't send mine back either.
I'm guessing since no one's replied, there's not really a solution to this.
If it is a failed radio, I'm amazed how easily they fail, and how many people seem to have this problem.
I have the same problem today. Anybody help?
anakin621 said:
I have the same problem today. Anybody help?
Click to expand...
Click to collapse
i had the same problem with my Telstra T9193. i couldnt find any solutions so its on its way back to australia under warrenty.
I had a similar problem to this, though it appears I just fixed it. I can only imagine it's just a temporary fix though, as I previously managed to get it working and running Android only to white screen again the next day.
I did a hard reset and now it loaded the white HTC screen and nothing else. I tried installing a stock ROM from the MicroSD card and got the same "Update Terminated Update Fail" error because of the Radio. Retried the update about 3 times, and it eventually installed fine.
same here, i reloaded a stock from sd to relock it, which i highly recommend for anyone having this problem - in case it needs to go for repair and it just happens to boot..it took quite a few tries to have a proper flash and it booted only a few tries afterwards and then went back to only booting the white htc screen. so frustrating. and unfortunately for me it has to go back to australia for warrenty and will likely take ages to get back
I was stuck at multi color boot screen after hard reset. Tried multiple roms.
Solution: Use the 2.13 rom from here. Worked thankfully!
forum.xda-developers.com/showthread.php?t=655653
After being looooong on this forum, I finally got my first bricked HTC. I got all the same problems, white screen, no way to get HSPL gone, and no update via SD possible, no ROM update via USB in bootloader and no radio update possible...
Anybody knows how much it costs if I send it to HTC and they find yout it has been HSPL-ed?
Next with the bricked HD2
So definitely I´m in the same situation.. I have unusable SMARTPHONE!!
Even worse, because in my case i have no chance to send it to warranty repair - I was too disparate and curious so I opened my HD2 to look for an backup battery to erase everything that could have resist my countless tries to reflash, hardreset, flash RADIO, flash ROMs...
At the begging was the same (btw the same is still) : I took my phone and it did´t answer for waking it up. So I pressed red button to (soft)reset it. But it booted only to white screen (not the HTC one but "pure" withe w/o logo, w/o software info but with slightly yellow hue)
This was almost whole week ago... During that time I tried almost everything (I don´t have gold card - since I can´t get CID of any SD card I´m not able to have one and have installed HSPL 2.08 I´m ABLE to FLASH any ROM - even successfully reflashed cooked ROM via SD Card.!!) and the answer for me is probably some hardware problem....
-rr-obin said:
So definitely I´m in the same situation.. I have unusable SMARTPHONE!!
Even worse, because in my case i have no chance to send it to warranty repair - I was too disparate and curious so I opened my HD2 to look for an backup battery to erase everything that could have resist my countless tries to reflash, hardreset, flash RADIO, flash ROMs...
At the begging was the same (btw the same is still) : I took my phone and it did´t answer for waking it up. So I pressed red button to (soft)reset it. But it booted only to white screen (not the HTC one but "pure" withe w/o logo, w/o software info but with slightly yellow hue)
This was almost whole week ago... During that time I tried almost everything (I don´t have gold card - since I can´t get CID of any SD card I´m not able to have one and have installed HSPL 2.08 I´m ABLE to FLASH any ROM - even successfully reflashed cooked ROM via SD Card.!!) and the answer for me is probably some hardware problem....
Click to expand...
Click to collapse
I'm sorry, I just sent my to the repair center. Hope they will repair it under warranty. Otherwise it will cost me 100 Euro, just to find out I have to pay for the repairs. Then I can choose to let the device there (then I don't pay 100 euro) or let the device ship back (I pay 100 euro for a brick) or let them do the repairs which they will say how much it will cost on top of that 100 euro ..... stress ....
Birger said:
I'm sorry, I just sent my to the repair center. Hope they will repair it under warranty. Otherwise it will cost me 100 Euro, just to find out I have to pay for the repairs. Then I can choose to let the device there (then I don't pay 100 euro) or let the device ship back (I pay 100 euro for a brick) or let them do the repairs which they will say how much it will cost on top of that 100 euro ..... stress ....
Click to expand...
Click to collapse
Check this thread... unfortunately it wouldn´t be quite easy whith the service repair...
_JuSteR_ said:
...
With the radio bricked there are only two things you can try to do:
1- You can go on using your hd2 without updating the radio. Try to download a rom without radio and install it, or ask a cook to prepare a rom (you can try an official rom if you want to recover the original SPL) without radio for you.
2 - Do what I did and sell the phone as bricked, because there's no way to unbrick radio system. I tried to save my HD2 by recovering the original SPL and sending the phone to the htc customer service. I got the phone back after 2 months and it was still radio bricked
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=618084
upload a pix of your bootloader screen,I had similar kind of problem.I 've been through a lot of hardship dealing with the that.Maybe i could help u a bit.

got hardspl now i'm stuck

a similar question has probably already been posted
i have a tmobile hd2
i successfully hardspl to it
i flashed the energy reference rom
then i realized that i needed to use the task29 tool before
i flash any rom... did that, hard resetted, and then tried flashing again (energy referecne) using the sd card method
and i just get stuck on the "NRG" screen
tried the other custom ruu method getting the same results
using the radio 2.07.50.27
i put back the regular spl to flash a stock rom but still no luck
i know the phone isn't bricked i can get to boot loader, hard reset
any help would be much appreciated
Thanks in advance!
Thanks!
lilguy227 said:
a similar question has probably already been posted
i have a tmobile hd2
i successfully hardspl to it
i flashed the energy reference rom
then i realized that i needed to use the task29 tool before
i flash any rom... did that, hard resetted, and then tried flashing again (energy referecne) using the sd card method
and i just get stuck on the "NRG" screen
tried the other custom ruu method getting the same results
using the radio 2.07.50.27
i put back the regular spl to flash a stock rom but still no luck
i know the phone isn't bricked i can get to boot loader, hard reset
any help would be much appreciated
Thanks in advance!
Thanks!
Click to expand...
Click to collapse
ok as from my knowledge you dont necessarily need to do task29 if its ur first time flashing (cuz i didnt and i got very good results) so i think u messed up in tht part.. but its ok, now you prolly want to first --> do a task29 again... second ---> get the nrg rom and flash it.... third -->get a radio of 2.10 or higher and flash tht....and just to play safe flash everything using custom ruu (i got better results using them...just saying)... also when u do each flash and its suspenseful dont boot up the phone, just take out the battery and back into bootloader.
hope this helps... report back lol
^thanks man
Okay so heres how it goes, my phone is def not bricked
custom ruu has only worked once for me
now whenever i try to use it it always gets stuck at 8%
i found that if i flash it at night and hard reset. wait til morning and turn on the phone
then it loads past the nrg screen and into the OS.
i'm currently trying to get it back to stock and i downloaded the tmobile update
but it doesnt seem to work, it also keeps stopping at 8%
i disable the anti virus stuff and i plug it in to the back of my computer
sounds like a defect
sorry to bust your bubble bro but it sounds like you got a classic case of a defective leo, i too did the same steps you did and it turns out my main board wasn't any good and the phone kept overheating, turns out when flashing custom roms they tend to put more pressure on the snapdragon then a regular stock t mobile rom. i know this sounds crazy but i believe it to be true, so with that said you got two options, one get back to t mobile customer care and get a replacement. or do what i did and find a repair shop and let them know that your leo either needs a new mainbaord or a new heatskin like mines did, it cost me 80 dollars which wasnt bad since my leo was a gift and i couldnt give it back to t mobile... hope that helps in some way
p.s. sorry for the edit but if you cant do either of those of what i suggested, try this get yourself a nice icepack nthe size of your phone and mount the leo on top of it whenever your using it, so that sucker wont overheat. once again i hope i helped

[HELP NEEDED] Stuck in white bootscreen with no connection

Hey all,
Maybe someone can help me out.
Two weeks ago i installed andoid on my HTC HD2.
I used HPSL, radio 2.15.50.14, MAGLDR112 and NexusHD2-Gingerbread_V2.1_NAND. A few days ago, without any reason i got a white bootscreen and i still have it
What a did so far:
* New HSPL3, but the radio didn't connected anymore, error 270.
* A new MAGLDR, i reached 100% in a blink, but then an error 270.
* Using a SD with the original leoimg, i get a (00018003 radio fail) error after a few % and the update failed.
* task29, but again no connection. (after 5 min error 262)
* new USB drivers installed for windows 7 and i also tried it on an windows Xp computer.
So far i only reached my 4 colored screen with:
PB81100 HX-BC
SPL-2.08. HSPL 8G XE
0x05
CotullaHSPL 0x30
* The original rom was RUU_Leo_S_HTC_NLD_3.14.404.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
Last question, how can i check that the batttery is stil oke for flashing.
Anyone who has a clue what to do?
Thanks in advance.
greetz!
Rob
Mate, I think you´ve done everything. HSPL and Radio ROM versions correct etc.
Since I see more and more people reporting similar problems like you, I get the feeling that some Android builds might have some strange effects on Radio ROMs.
There are too many people with SPL and Radio ROM problems, eg. stuck in bootloader or at the white startup screen.
This didn´t happen at this pace before Android NAND.
Only 1 question though:
Did you try to flash the original ROM using RUU.exe, SSPL or LeuCustomRUU via USB, without having the SIM and the SD card inserted? In rare cases, either one or both were trouble makers...
EDIT: Second question:
What kind of SD card did you try? Bigger cards seem more problematic, too.
I used a 2 gb micro SD card to go back to the original Rom.
I didn't tried to go back to original ROM using USB, because of the connecting problems. So that i'm gonna do now. Any suggestions which to use best?
After your post i tried to the flash with (and without) the formatted sd and the simcard, unfortunatelly i didn't work.
For last your question i can say that connect your phone to PC when it is off. Then keep down "volume down" button and switch on your phone. You get 4 colored screen. On bottom you can see USB word. Let phone for minimum 1h. And you get more 50% charged battery.
After hour you can flash back to original rom or to MAGLDR and forward normally flash android nand. You dont need disconnect or switch off before flash your phone.
Hope helps.
@tictac0566
Thanks for the options!
I tried the options mentioned in question 1, the problem is the connection USB/Radio. SSPL seems to work, but after 1% again connection error.
After a few test it must be the radio.
I tried to flash only a new radio using LEOIMG, after 99% i get the same error as LEOIMG an original Rom (00018003 radio fail)
With HPSL3_PKG i also can't go back to SPL 2.08.000.
So the problem must be there.
Anyone has an idea?? Can i use another radio? If yes, than which?
Thanks!
Still no solution
Tried many things, still the radio is not working.
It could be also HPSL3, because i can't go back to spl 2.08 (or any other (h)spl with the app.
Anyone has an idea??
Just trying to help here, but have you tried doing everything from the start?
task29 and everything else?
Hey i seem to have the same problem as you except my white screen wasnt after a flash, it just randomly went white one day and wouldnt boot.
I have tried MTTY, i can connect via usb but after formatting via MTTY and then attempting to flash a new rom (ship and custom) it just stays on 0% and doesnt do anything else.
Sorry to hijack thread just thought whilst people are looking they can help me too
CrAzYiaN said:
Just trying to help here, but have you tried doing everything from the start?
task29 and everything else?
Click to expand...
Click to collapse
Yes i did, this thread is official mine
It must be the radio or else HSPL3_PKG.
Do you have some options??
Thanks in advance!
tomar5e said:
Hey i seem to have the same problem as you except my white screen wasnt after a flash, it just randomly went white one day and wouldnt boot.
I have tried MTTY, i can connect via usb but after formatting via MTTY and then attempting to flash a new rom (ship and custom) it just stays on 0% and doesnt do anything else.
Sorry to hijack thread just thought whilst people are looking they can help me too
Click to expand...
Click to collapse
Can you go into bootloader? If you can then your problem can be solved. The problem you are having might have been because you unintentionaly installed or uninstalled a programm and that corrupted your rom.
To both of you. Try to flash using the leoimg.nbh step. If it doesn't work then the rom you used is not compactible with your device, try another till you find one that will work with your device. I know it is tiring to do something like that, here a tip from me, the rom you are expected to use in this process must be in the native language of your phone or else it will not work. You can't just use any stockrom to do it. I hope it helps.
Abdul9. said:
Can you go into bootloader? If you can then your problem can be solved. The problem you are having might have been because you unintentionaly installed or uninstalled a programm and that corrupted your rom.
To both of you. Try to flash using the leoimg.nbh step. If it doesn't work then the rom you used is not compactible with your device, try another till you find one that will work with your device. I know it is tiring to do something like that, here a tip from me, the rom you are expected to use in this process must be in the native language of your phone or else it will not work. You can't just use any stockrom to do it. I hope it helps.
Click to expand...
Click to collapse
Thanks for the advice, but all the roms i tried i got a radio fail during flashing with leoimg.nbbh.
Maybe your HSPL is faulty ? Did you try to re-HSPL your device using HSPL.exe ?
kawazaki said:
Maybe your HSPL is faulty ? Did you try to re-HSPL your device using HSPL.exe ?
Click to expand...
Click to collapse
Yes i tried, but mine HD2 stays on SPL-2.08 HPSL.
I used HSPL3_PKG and HSPL2 in different but still SPL-2.08 HSPL.
Maybe there's where my problems are, but i als can be an corrupt radio.
Anyone an other way to back to SPL 2.08.000 or how to fix the radio?
Then your best bet is to flash with a goldcard
Abdul9. said:
Can you go into bootloader? If you can then your problem can be solved. The problem you are having might have been because you unintentionaly installed or uninstalled a programm and that corrupted your rom.
To both of you. Try to flash using the leoimg.nbh step. If it doesn't work then the rom you used is not compactible with your device, try another till you find one that will work with your device. I know it is tiring to do something like that, here a tip from me, the rom you are expected to use in this process must be in the native language of your phone or else it will not work. You can't just use any stockrom to do it. I hope it helps.
Click to expand...
Click to collapse
Yes i can get into bootloader. I have tried using MTTY task 29 to format the device then i searched on the HTC site for a compatible ROM. Turns out the only one that doesnt give a negative response when i type in my serial number is the ROM from Taiwan. Tried flashing that using the SD card method and the USB method. Sd card method hangs at 0% and i get a connection error in USB method. I have also tried the latest ROM from Dutty.
If a ROM is not compatible how do you know? Does it hang at 0% or does it finish loading and then wont boot from there.
I have even tried flashing just a radio with the same results.
kawazaki said:
Maybe your HSPL is faulty ? Did you try to re-HSPL your device using HSPL.exe ?
Click to expand...
Click to collapse
Yes i tried all different types of HSPL and even SSPL. From the bootloader screen i run the .exe from the computer and it goes through and says 'operation finished successfully'
But when i get back to the bootloader it still says the same HSPL, which is 1.66
Also to note when i power on the device i can hear a small 'click' from it. Could be much worse and be a hardware problem?
Still no solution.
Oke guys, thanks for answering my threat so far!
Still trying to get my HTC back to life.
Is it possible that my problem is in HSPL? (see attachments)
After the white screen i tried to reinstall HPSL 2, 3 and 1, but during the instal my HTC reboot (without the signal "We Hacked It"
I also tried different SD card for LEOIMG, still radio fail 00018003.
One thing i didn't tried is using a goldcard, i downloaded the app but i need a working HTC HD2 to make the card.
Anyone?
No you don't, there you go :
http://forum.xda-developers.com/showthread.php?t=874304
Goldcard is the old method to install a custom rom way before HSPL became popular
so if HSPL don't work then Goldcard wont as well but hey you can still try
I think its more of a hardware problem now since all attempts for software repair is not successful. I had the same situation as yours, white screen then radio fail, tried all solutions but still no luck
sameeeeee
i have the same problem 100%
i already try all these solution and no one is worked
however, some one told me that maybe the problem with the Flash memory of my HD2 because he already try to solve / or already solve such problem "but unfortunately he lost the tools he was used"
this tools is can check the memory and told which memory chunk is corrupted
please if any one know this tools or had it please posted it on.....
That app should be Task 29.

Bricked HD2 Leo

Hi every one. I had a problems with HD2, my original ROM was with a lot of problems, it restarted without no reason and so on. My colleage suugested to flash with another ROM, so I tride to flash a new ROM, did a Hardspl2 and now my HD is bricked, with triangle and no ROM also shiped (donwloaded from HTC web page by serial) is not working. Anybody help me? I tried lot of ROMs and no luck at least .... Triad also flash with original ROM via Micro SD no luck... Please help me!!!! URGENT!
prieditis said:
Hi every one. I had a problems with HD2, my original room was with a lot of problems, it restarted without no reason and so on. My colleage suugested to flash with another room, so I tride to flash a new room, did a Hardspl2 and now my HD is bricked, with triangle and no room also shiped (donwloaded from HTC web page by serial) is not working. Anybody help me? I tried lot of rooms and no luck at least .... Triad also flash with original room via Micro SD no luck... Please help me!!!! URGENT!
Click to expand...
Click to collapse
Firstly its "ROM" not "room".
What do you mean "with triangle" ??
Which HD2 do you have and which ROM did you try flashing?
Can you get into tri-color bootloader mode?
Sorry i post my thread quickly. Yes i tried to flash a ROM, i have HD2 512MB. I tried to flash a 3.14.405 rom. triangle - i can get in tri-color bootloader mode, but when i try also flash original rom there is no result, it crashes on 9 or 17%. Triangle is a sign when i switch on a device, i believe it means ther eis no windows/rom on device
prieditis said:
Sorry i post my thread quickly. Yes i tried to flash a ROM, i have HD2 512MB. I tried to flash a 3.14.405 rom. triangle - i can get in tri-color bootloader mode, but when i try also flash original rom there is no result, it crashes on 9 or 17%. Triangle is a sign when i switch on a device, i believe it means ther eis no windows/rom on device
Click to expand...
Click to collapse
your device is not bricked... get into bootloader and do a task 29 (LOOK IT UP)...
Then start from scratch... Magldr, then whatever ROM you want.
Can you explain me? Please step by step... Thanks in advance
prieditis said:
Can you explain me? Please step by step... Thanks in advance
Click to expand...
Click to collapse
you need to take a leap and search for it... Here is something on youtube i found.
http://www.youtube.com/watch?v=DtTDuc4V4cU
EVERYTHING you need is on XDA if you look for it...
prieditis said:
, my original room was with a lot of problems, it restarted without no reason and so on. ..with triangle and no room aURGENT!
Click to expand...
Click to collapse
... OK, no room = homeless!
If you can't pay rent, I'm afraid I'll have to ask you vacate the area.
Possible fix stuck bricked hd2 radio no rsa information
Please read the whole post first sorry about the mess it is my first post thanks to everyone here on xda who came up with everything i used to do this There is guides for this xda has a lovely list of tmous roms if you are on t mobile in the us http://www.xdafil.es/index.php?path=HD2/TMOUS/
i would start with the RUU_Leo_1_5_TMOUS_2.02.531.MASD_S__Radio_Signed_15.29.50.07U_2.06.50.04_TeleNav-5.5.42.zip
extract the .exe file if it has one than extract the RUU_signed.nbh from the .exe file using win war or 7 zip than rename it to LEOIMG.nbh and place it on a newly formatted microsd not a microsdhc and i had problems with anything over class 4
place it in your phone and hold the volume down button and power button as loading comes up let off volume down power button will start the flash(i was only able to do complete flashes in the freezer if not it would hang or get radio errors)
i also had a tmous which did not want to flash the radio i would get an an error and rsa fail it sounds crazy but i wrapped it in plastic and stuck it in the freezer for a while before and during the flash this was the only way i could install the radio and actually see rgd information on boot screen after this first one you will have an old test rom with an old spl you cannot change to hspl from here i also was not able to go straight to 2.10, i had to step up from RUU_Leo_1_5_TMOUS_2.03.531.6_Radio_Signed_15.30.50.07U_2.06.50.23_3_Test.zip, to RUU_Leo_1_5_TMOUS_2.03.531.6_Radio_Signed_15.30.50.07U_2.06.50.23_3_Test.zip the same way i did the first one,hard resetting after each one and let it open windows completely to know it is working. than i believe there is an hspl3 file somewhere out there with all thanks to DarkForces Team HardSPL3 by bepe and Cotulla i will try to attach it that will work with spl 2.02 wich you should now be on now you can download your radio in the master radio thread http://forum.xda-developers.com/showthread.php?t=611787
i also just renamed the ruu_signed.nbh to LEOIMG.nbh and ran through sd i seem to have problems through usb and i was trying to be careful with the radio
once you got the radio you want you could flash the rom preferably running task 29 before or get yourself magldr to install through nand i also stuck my laptop an the freezer with the phone to get wp7 completely installed i did all this mess with a phone that had a broken screen i think there is like thermal compound over the processor to the case that is not on right and overheats when not in the operating system like a crappy old laptop with its fans full of stuff trying to install xp. and while a stock rom was being installed the usb was pulled during the radio installation i hope this helps i belive i saw one post to stick it in the freezer out of everything that i think helped the most.i also notice i have to put it in the freezer at boot too sometimes or i will get a fatal hit error i think its just over heating..... i also have an hd2 which has never been opened before that i have never had to stick in the freezer it gets flashed quite abit right now running gingerbread on normal hd2 and wp7 dual boot android 2.2 on the one i had to freeze i hope this helps i was here for weeks reading reading i was stumped cus my first hd2 and g1 were so eazy i will update this post once i stop being lazy and open the phone again to replace the goop to see if that is the problem
Thank you for reading my jumble and thanks again to all you phone heads here on xda which without you none of this would be possible and i would not have wp7 and gingerbread on my hd2 : D
I did a task29, flash a ROM succesfully, but now it' s stucked in HTC loading mode (Shows a HTC and nothing happens)
prieditis said:
I did a task29, flash a ROM succesfully, but now it' s stucked in HTC loading mode (Shows a HTC and nothing happens)
Click to expand...
Click to collapse
succesfull only one time, now i tried reflash an original rom once again and no results, still stucked in triangle. It's a first time when something like this happens
P.S. Sorry for my english..
spyderman33 said:
you need to take a leap and search for it... Here is something on youtube i found.
http://www.youtube.com/watch?v=DtTDuc4V4cU
EVERYTHING you need is on XDA if you look for it...
Click to expand...
Click to collapse
no luck at all I tried it once and have succesfull rom update, but it stucks when started with HTC logo, i tried second time and still no luck. Please help me.. all the time now also for original rom it says that this room is not for that device
original rom
you have to find the original rom shipped with your phone like here i am tmobile usa roms you have to find your carrier and country and start with one of the first ones i started with my second one RUU_Leo_1_5_TMOUS_2.02.531.MASD_S__Radio_Signed_15.29.50.07U_2.06.50.04_TeleNav-5.5.42.zip and i kept getting stuck screens when it was hot turn it off maby find some silica gel (lil rocks that come with everything to absorb water) wrap it in plastic and throw it in the freezer does the back of the phone get real hot during flash
i have shipped original rom, still no luck
not the newest one
you need one of the first test roms this was the only way i got mine to work i had to go from 2.02 to 2.03 to 2.05 hard resetting after each install making sure they completely went in what carrier are you and where are you
Still stuck?
Download HSPL 3.zip from page 1,
Run the program;
a) select 2.08.000 (not HSPL) and you can flash stock (HTC) ROM with no damage or aftermarket changes on your phone.
b) select 2.08.HSPL and you can flash whatever you want
Install MAGLDR 1.13
Flash ROM
Make sure you follow the instructions EXACTLY. You can find these all over XDA, look at all of my posts if you need to.
stepthehen said:
Download HSPL 3.zip from page 1,
Run the program;
a) select 2.08.000 (not HSPL) and you can flash stock (HTC) ROM with no damage or aftermarket changes on your phone.
b) select 2.08.HSPL and you can flash whatever you want
Install MAGLDR 1.13
Flash ROM
Make sure you follow the instructions EXACTLY. You can find these all over XDA, look at all of my posts if you need to.
Click to expand...
Click to collapse
Hi, thanks a lot. Only, SPL for original rom was 1.42000 is it ok to flash with 2.08.000 ? And why i should install MAGLDR 1.3 ? Thanks in advance,
Ok, now i dont understand anything. My original SPL was 1.42, i did Hardspl 3, after that tried flash original rom, process stuck on 96%, after that i tried once again stuck on 9% and says rom not compatible with device. And its like a hidden circle, my phone is acting like that all the time. I tried task29, tried all HSPL, also 1.4200, 1.66 and so on. Can anybody help me? my skype nick is martins.prieditis , maybe someone can assist me?
Ok now its fixed. I did a HSPL4, due to which original rom freeze on 0%, but 3.14 didnt start up on loading OS (white screen with HTC logo))or freeze on 99%. Than went back to shipped 1.42, stock room succesfylly flashed and did a SSPL_RUU. Now the only problem is that my LEO restarts when it gets hot. Any ideas how to fix it?
Thanks all for youre help (regarding my previous issue) !
Overheating??
As mrpoe stated in post 9, One of his phone had to be put in the freezer to be able to flash anything otherwise it will get hot and freeze.
Also the motherboard is most likely broken and you cannot get it to work without freezing or it will keep rebooting...
The best thing to do if you still have warranty is to Keep stock SPL and stock WM6.5 and return for warranty.
It will not function the same again.

[ISSUE] HD HD2 Won't Boot Android 2.2

Info:
I purchased this phone from ebay and it came today, i turned it on and it all worked fine, however when i took out the battery and put in my simcard it froze on boot and now the phone will not boot up, it just hangs on the HTC Logo at the start.
Problem:
-I am unsure if the Android 2.2 is installed on the simcard on the actual device.
-I have no idea how to get it working
-I tried a hard Reset however it froze when it was resetting
-Phone won't turn on.
I am unsure if its a LEO or what, its has T-Mobile written just under the Speaker.
What i need:
- How do i fix this issue?
- I would like to install Android 2.2 or Android 2.3 Ginger however all the threads are confusing and i have no clue what to do.
All help would be great.
Ok i have figured out what to do however i can't get the HTC HD2 to be recognised by WMDM, it constantly says ' Not Connected'.
Tried different USB Ports,
Tried reinstalling and uninstalling however it just wont work.
I think its because the phones in the mode with the rainbow screen.
Is there anyway around this or am i Stuffed.
I have tried with a few Windows 7 computers and it didn't work on any (((
Please help
What hspl does it say it has?
Sent from my HTC HD2 using XDA Premium App
when u r in the booloader ( rainbow screen ) WMDM wont recogn ur hd2,
just install stock wm 6.5 from bootloader
u can get it from http://forum.xda-developers.com/showthread.php?t=807617
just run the .exe
Hi there,
Yes i have downloaded the Official ROM from T-Mobile.com and entered my IMEI, so i suspect its the correct one.
Tried updating from the Computer and it got to 5% and then said Update Failed. With the error 284 Lost Connection.
I also tried doing it from the SD Card with the leoimg file and that got to about 2 percent and then said Radio error, or something
I'm guessing this should have worked, however it didn't
Cheers
willymanilly said:
Hi there,
Yes i have downloaded the Official ROM from T-Mobile.com and entered my IMEI, so i suspect its the correct one.
Tried updating from the Computer and it got to 5% and then said Update Failed. With the error 284 Lost Connection.
I also tried doing it from the SD Card with the leoimg file and that got to about 2 percent and then said Radio error, or something
I'm guessing this should have worked, however it didn't
Cheers
Click to expand...
Click to collapse
Any ideas?
Did it atleast show any progress bar when loading leoimg.nbh from SD card?
Sent from my HTC Magic/Dream using XDA App
You did install this version of Windows Mobile Device Center? (WMDC)
http://www.microsoft.com/windowsphone/en-us/howto/wp6/sync/installing-wmdc.aspx
And as someone else asked about HSPL version, under Tri-color screen it should say HSPL 2.08 somewhere.
kompheak said:
Did it atleast show any progress bar when loading leoimg.nbh from SD card?
Sent from my HTC Magic/Dream using XDA App
Click to expand...
Click to collapse
Hi there, it showed some progress then said failed.
I have tried flashing a huge amount of versions however none seem to work
Maybe i need to flash a new radio or SPL etc
Don't give up...
Okay I have experience that also... but after countless tries and research, I have the guys on xda help me revive my hd2.
Lets start fresh... tmous or EU? Spl? ... what number... hspl? And what number.?
Sent from my HTC Magic/Dream using XDA App

Categories

Resources