Hi all,
My GT540 got bricked while flashing a V20B Rom. Now its not starting at all. No power+anything, no battery-in battery-out trials work.
Any ideas before I take it to the LG repair center because my LG repair center is in another country (lool) ??
Try to boot your phone into Emergency/Download mode (VOL DOWN + POWER). If the phone booted into Emergency/Download mode, launch KDZ Updater.
In TYPE dropdown menu, choose EMERGENCY
Make sure you use the USB on back of PC if using desktop. Another thing to try is take the battery out before plugging in USB should download drivers maybe not much help but one step closer to working phone.
Sent from my GT540 using XDA App
Thank you guyd for the suggestions. I am so much beyond this stage now. The phone is not turning on in any mode. Nothing at all.
Taking it to the LG service center is a real trip to another country now.
Plug phone into computer without battery In what dose it do? you should get animation of phone with back cover sliding up? Leave it for ten minutes make sure your internet is connected,then put battery back in make sure it's got at least 70percent charge, then connect phone to computer and put into download mode power and press volume down....
The rest is all listed above.hope it helps.
Sent from my GT540 using XDA App
Unfortunetely, the only way to fix your phone is to give it back to LG Service, they will provide you with new one if you have waranty, it happened to me once when i was flashing my phone and my pc restarted :S
You have killed the bootloader, you could fix it by youserlf of find a programmer with special device to flash a bootloader back into the phone :s
Charge your battery and try all again kdz is your best bet if no fastboot screen !!!good luck!!!
Sent from my GT540 using XDA App
deamonjones said:
Charge your battery and try all again kdz is your best bet if no fastboot screen !!!good luck!!!
Sent from my GT540 using XDA App
Click to expand...
Click to collapse
The point is You cant charge your phone, you cant turn it on, you cant boot into fastboot/download or any other mode, PC dont detect your phone. PHONE IS LIKE A BRICK, dont react to anything... This happened to me once, the only option for him is to give the phone to LG Service. They will replace it, he accidently killed the bootloader like i told in a post before.
@deamonjones Nothing happens when I plug it to the pc or the chrager. With or without the battery.
It requires a JTAG device to re-write the bootloader.
For future refernce - GT540 JTAG info :
http://www.omnia-repair.com/forum/topic/lg-gt540-request-to-unbrickrepair-dead-boot
This is a much more clearer way to do it. And the device is not so expensive. But I really don't have the time to do it as it requires too much timeand accuracy.
http://www.jtagbox.com/
Related
i have lg gt540 and while updating to 2.1 with kdz tool the pc crashed now i cant turn on the phone...i hope some one help me with that
Have you tried updating again?
the problem the the phone dont open when i press power button there is nothing
what about when plugged into pc?
first thx for replying but there is nothing when i connect it to pc i think it needs abootloader.i hope u answer me
im afraid im pretty new to android ( gt540 is my first smartphone ) but anytime i updated, everything went ok, in fact yours is the first time i heard of a crash while updating so i cant give you much info but your in the right place, im sure the devs can figure something for you. just try remove the battery and then plug into your pc. and its not a problem replying just wish i could help.
well, did you try with the battery removed?
yes i did nd there is nothing
plz any one help in that
plz some one tell me how to make abootloader to it i have another lg gt540 i want to know if i can use it to repair the bootloader for this dead phone
The problem is theres noway u can acces inside the phone memory to patch bootloader. Go to lg waranty and tell them this happened when u were updating phone, dont tell them that pc crashed, tell them u updatet through lgsupport tool too, not through kdz updater they should fix it for u.
Sent from my GT540
thx for replying i will call them tomoorow i hope they will fix it for me... i want to ask if some one has passed with the same problem b4
Goto Emergency Mode, and upgrade from KDZ program. In KDZ program, you must setting Phone Mode to CS_Emergency. And flash agan.
i sent them email about the problem and this was the reply
Thank you for your email regarding this issue.
Unfortunately due to the nature of this issue, you will no longer be able to finish the update service. In this case you would be required to return to ourselves for servicing. To action this please contact the number below with your reciept and handset to hand.
If you have any further queries, please do not hesitate to contact us again.
Best regards,
LG Electronics UK Helpdesk
can any one tell me what should i do
Remove battery press volume - or + I can't remember try two options, then plug in usb.
You should see blue screen with DOWNLOAD or EMERGENCY MODE text.
i tried all keys combination nothing work
my mobile internet went dead after flashing quarx rom (I did it wrong btw...), but everything else worked fine.
I couldn't get mobile internet back on track no matter what (it was disabled in quick settings when I flashed quarx), I even tried factory reset and flashing the baltic rom. during the flashing, the kdz updater gave me an error close to the end, and my phone became stuck at the android screen.
even though I have CWR installed, so I could flash it again, I sent it to LG claiming I was updating through their website and since my phone doesn't start. I didn't tell them anything about the mobile internet not working. Hopefully they'll clean the phone completely and that will fix it.
I'll be picking up my phone after work today, I'll let you know how it went.
Same thing Happened to me n almost **** my pants for killing my brand new phone..
follow these steps
1. volume +or-(i dont remember) +camera n power on. it should turn on n say downloading mode.
2. update( you can use kdz updater, it probably wont crash this time but even if gets stuck just w8 for it)
3. after updating, remove the usb cable n turn on the phone, hopefully it would work
4. ENJOY ( N THINK TWICE BEFORE EFFING WITH THE PHONE, )
i am not sure about the keys for emergency/downloading mode(i think it was vol-) GOOGLE IT IF KEYS DONT WORK.
Put to microwave on 2 sec without battery and send do service
my service provider fixed my phone in 3 days without any issues, they flashed the t-mobile branded 2.1 on it. went home and now I have the open europe with fastboot and cwr.
so if all else fails, just send it to LG or your provider.
cheers!
Hi,
I tried to upgrade from v2.1 to new Android 2.3.5 Gingerbread For LG Optimus GT540 and I followed instructions exactly, but I am stuck at number 8, I did this:
8- Now click “Launch software update”, DO NOT USE THE PC TO THE PROCESS IS COMPLETE. THE PHONE WILL REBOOT WHEN FINISHED THE PROCESS IN KDZ. (The process takes about 15 minutes in KDZ).
and about 2 minutes text log writes and stopped, I am now waiting more then 40 minutes my phone didn't reboot. On display is still written download mode, what should I do now ?
In kdz is written:
3GQCT: wParam = 205. IParam = 36
p.s.
I disconnected phone from usb and pull out battery and now I cannot turn on phone, I tried to push vol down + power for 5 sec.
Any idea what should I do now? I hope I didn't brick my phone
What programs are you using?
What are you using to update your phone and have you tried taking out your SIM, SD card and battery then turned it on with the USB cable?
I used KDZ updater and tried to install CyanogenMod7 (2.3.5) @ GT540 Swiftdroid2 RC3 by Mur4ik. if that is what you ask ?
I removed sim card and battery also, then tried to turn it on while plugged in to computer usb but no response from phone, I can't turn it on
p.s. I am using win 7 64 bit OS
gorantz said:
I used KDZ updater and tried to install CyanogenMod7 (2.3.5) @ GT540 Swiftdroid2 RC3 by Mur4ik. if that is what you ask ?
I removed sim card and battery also, then tried to turn it on while plugged in to computer usb but no response from phone, I can't turn it on
p.s. I am using win 7 64 bit OS
Click to expand...
Click to collapse
If you can't get into download mode, then it's game over I'm afraid. What you will need to do is return the phone back to where you bought it. This happened to me some time ago. But the Carphone Warehouse were happy to fix it (even though I had voided the warranty but don't tell them that ). Don't say that you tried to mod the phone, say something like 'I installed LG's PC Suite and it said my device had a software update. I went along with it, but it gave me an error half way through. Now my phone won't turn on at all' It might just work!
I had the same problem when modding with kdz.
completely bricked my phone, but was able to fix by putting kdz into emergency mode instead of diag and updating with a fastboot stock rom,
it would stop after 2 minutes and give me and error but it managed to get fastboot onto my phone,
(camera + power)
then just flashed the fastboot method with adb and everything was fine,
my problem was something to do with lg modem drivers i believe,
I read a thread that said to disable the lg virtual modem. (didnt
work for me)
pretty noob myself
but the above method worked for me,
not sure if this can do anymore damage to the phone
have a look at this is u get it into emegancy mode.
On the kdz updater instead of 3GQCT put into emergancy
http://www.youtube.com/watch?v=fDmU9RSIiDA
If you have tried flashing with Cm7 you might be lucky,
try holding camera button and powering on the phone, a black screen should come up thats fastboot.
if that comes up u should be able to just reflash following mur4iks instruction
if not try what i said in my last post and reflsh with phone type 3QGCT and PhoneMode EMERGENCY
again only going of how i fixed my bricked phone
ZxWelshyxz said:
If you have tried flashing with Cm7 you might be lucky,
try holding camera button and powering on the phone, a black screen should come up thats fastboot.
if that comes up u should be able to just reflash following mur4iks instruction
if not try what i said in my last post and reflsh with phone type 3QGCT and PhoneMode EMERGENCY
again only going of how i fixed my bricked phone
Click to expand...
Click to collapse
He was trying to flash a fastboot rom (to install CM7) but bricked his device in the process. So he can't flash CM7-.-
Yeah I know that but I mean when I got the error he has, I flashed with a stock 2.1 fastboot rom With Diag changed to EMERGENCY and was able to get on to fastboot mode (camera+power), I got the error again as i was flashing but the phone would load fastboot and not start up
If he can get lucky and get into fastboot like i did, a simple:
fastboot -w
fastboot flash boot boot.img
fastboot flash system system.img
fastboot reboot
should fix his problem or did i just get lucky?
sorry if im confusing thinks here, but this is how i fixed mine. which was also dead and not turning on
Sent from my GT540 using XDA App
@ZxWelshyxz
I am total neewbie, can you write to me some kind of tut, like press that then do that etc
gorantz said:
@ZxWelshyxz
I am total neewbie, can you write to me some kind of tut, like press that then do that etc
Click to expand...
Click to collapse
Well like i told you im a noob at this myself (Android phone flashing atleast)
I suppose it would be good to see if you got fastboot??
Power on the phone while holding camera button (hold the camera button until the screen goes black) if you can get fastboot you can just follow the fastboot flash instructions after fastboot -w
if not on kdz in the top right were it says DIAG, Change this to CS_EMERGENCY,Click Launch update and flash again with a stock fastboot rom
after THIS see if the phone loads or boot loops(had this once too) or loads fastboot
Il try look to find the thread i read on another forum for troubleshooting kdz it helped me alot
EDIT: http://android.modaco.com/topic/321895-faqgt540-reference-thread/ try some of the troubleshooting tips at the bottom of the O.P
I basicly aimed to get fastboot working so make sure your flashing with a stock FASTBOOT! rom
again im new to this im just saying what got my phone back to life
my fone stuck in download mood what can i do?
corecrack said:
my fone stuck in download mood what can i do?
Click to expand...
Click to collapse
Pull out the battery and turn on the phone again (if you have knocked the phone when turning on, or flash a KDZ (when connected to PC)
@gorantz
Can i advise to follow step by step tutorial pin pointed by lavero.burgos, am a total neewbie like u man,but now using latest CM7 by Mur4ik and waiting for new release from devs
Sent from my GT540 using XDA App
thanks, but my phone is now at service when I get it back maybe I'll try....but maybe
gorantz said:
thanks, but my phone is now at service when I get it back maybe I'll try....but maybe
Click to expand...
Click to collapse
I bricked my phone and I tried it again after getting it back from lg
I'm new here and to having a Smartphone, I've just been given an LG Android GT540 which is at version 1.6. The LG site tells me I can upgrade to 2 something or other, sorry can't remember the exact number and gives instructions on how to do the upgrade, but I'm a bit on the cautious side as I don't want to brick it, not this early on in owning my first Smartphone.
I'll be reading a lot of the posts here to try and find out as much as I can before I attempt to do this.
Well don't worry if it's official update. But if you some how brick your phone just tell lg the update bricked your phone and we are talking about unofficial updates
Sent from my GT540 using XDA App
gorantz said:
thanks, but my phone is now at service when I get it back maybe I'll try....but maybe
Click to expand...
Click to collapse
Dont hesitate to ask for help man its worth upgrading.
Sent from my GT540 using XDA App
I've got phone today from service (not official LG service), repairman just manage to wake up phone so I can turn it On, but when I turn it I get black screen with message on it ''download mode''. Now computer recognize phone when I plug it, and I tried to update or flash it with kdz updater but have no luck
I launch kdz in emergency mode, load rom with updater, press launch button, and process started, (get messages unpacking software etc.) but after 3-4 minutes I notice that computer is blocked I couldn't do anything with mouse pointer, and I waited 15 minutes but computer is still blocked, even time on computer is stopped. I tried this procedure few times, every time it is same. Also tried to disable lg virtual modem in device manager. Any idea what I could do ?
p.s. repairman in service told me that he tried it to flash it with riff box, process started but after few minutes if stopped and blocked his riff box
Im unsure as to whether my Galaxy S is completely bricked.
My Galaxy S is stuck on a screen displaying - Phone ! Computer
I can't access download mode by the 3-button combo or by the USB jig.
Is there any way I can either boot the phone or get to download mode so i can flash with odin.
PS - I got to this stage by accidentally unplugging the device when flashing firmware in odin.
probably the answer is no im afraid if 3 combo AND USB jig isn't working...
Take the battery out for 10-15 min then place the battery and try Download Mode or the USB-JIG and see if get's to Download Mode.
Find someone with a riff box ... if your in the uk inbox me
Sent from my xxx using Tapatalk .
A friend of mine had a similar problem but the phone didn't show anything on the screen, I told him to do the button combo for donwload mode hold them for 10sec and connect it to the pc with odin open and it just work btw the screen wasn't showing download but it was, give it a try who knows
Sent from my GT-I9000 using xda premium
Now that my phones dead i have almost no way to access the internet so im sorry for the late reply
I'll try all these methods tonight when i get home from work.
Thanks everyone for your thoughts.
And btw I am in the UK, although I have no idea what a riff box is lol
A riff box is a box that fixes dead phones try asking your towns unlocking shop if thay have one if not inbox me and I'll run though the best way of getting your phone fixed
Sent from my xxx using Tapatalk.
Hi everyone. i take my friends lg gt540 last night to install the cm7 rom so i folow the instructions in that page and when kdz starts flashing stucks and gives to me a error. trying to get phone to download mode but the phone was dead no download mod kdz cant find the phone couse is like no battery connected. i follow all instructions in modaco everything. the prob is that i cant get the phone to download mode even drivers are installed even connected from back to usb port.
please dont tell me that i must take it to lg for fixing it. no waranty he bought it from a tourist really cheap nm.
maybe solution is to find a way to get to download mode.(volume down+power doesnt work,volume down+usb cable doesnt wok,no charger signal)
thank you (sry for my english)!
try using KDZ emergency mode maybe will work.. I forgot about how to flash KDZ since I dont use it much
try putting it on CS_EMERGENCY,this is for non working phones. do you hear sound when you connect your phone to pc?
No imagine a phone without battery. I try everything. So when i connect to pc must doing a noise? about kdz cant use it couse show me phone not found error. I will give a last try
Sent from my HTC Desire Z using xda premium
leave battery in the phone. you should hear a sound that you know that is connected. did you disable LG virtual modem in device manager?
brzijazo said:
leave battery in the phone. you should hear a sound that you know that is connected. did you disable LG virtual modem in device manager?
Click to expand...
Click to collapse
i try everything in a net coffee installing lg drivers only and used the instructions. yesterday i install and lg program disable modem still no luck. so if phone just doing that noise means that is connect it but how must kdz find the phone if the phone is not installed. (i mean not the lg drivers but the phone when is in usb debaging smth is installed in pc from phone) i search everywhere and everybody can get to download screen exept me grrr is not my phone orelse i will throught it from the window. so if the the noise is ringing means is connectid no need for download screen? thanks you and sry for my english!
you need that sound and download mode unfortunately. try installing new drivers and new KDZ and try again. if not take it to the LG service. do you have recovery installed?
brzijazo said:
you need that sound and download mode unfortunately. try installing new drivers and new KDZ and try again. if not take it to the LG service. do you have recovery installed?
Click to expand...
Click to collapse
No I though that no recovery needs to instal cm or alse i rooted and install rom i give last try and report if works thank you!
Sent from my HTC Desire Z using xda premium
fastboot is working now ?
regisol said:
fastboot is working now ?
Click to expand...
Click to collapse
no fastboot installed no recovery. i'll send it to a friend to look at it. is any other way to force get it to download screen or force flash it?
masterismos said:
volume down+power doesnt work,volume down+usb cable doesnt wok,no charger signal)
thank you (sry for my english)!
Click to expand...
Click to collapse
as far as i know its power + camera button.
Hold them down until backlight comes on. If you need it fixed by LG just lie about what happened. Dont tell them it died when you were installing a custom rom. Also from what i understand you cant get it to even turn on in any way? Or connect to a computer?
mihaiul said:
as far as i know its power + camera button.
Hold them down until backlight comes on. If you need it fixed by LG just lie about what happened. Dont tell them it died when you were installing a custom rom. Also from what i understand you cant get it to even turn on in any way? Or connect to a computer?
Click to expand...
Click to collapse
Im afraid i tried to flash a rom for other lg i will post later the link couse im from phone now
Sent from my HTC Desire Z using xda premium
masterismos said:
Im afraid i tried to flash a rom for other lg i will post later the link couse im from phone now
Sent from my HTC Desire Z using xda premium
Click to expand...
Click to collapse
well i cant find where is the rom that i download but i remember that the rom from cm7 (v20a20) was smaller than the rom that i download from mediafire (i used google search the name of the rom and i realise that is 2-5 mb bigger) i didnt want to w8 to appear the download link so i thought will be in another page. well the phone is been sending to my friend now and w8ting. if he find a solution i will post it. thank you
Hey guys,
Yesterday I tried unlocking my phone using the tools provided on this forum, but somehow my device got hard bricked.
It is just laying there with a black screen. It won't turn on, won't boot into recovery or emergency mode. Nothing.
But when I connected it to my PC (running Windows 7), I did hear the sound that it recognised it as a device, it just couldn't find any drivers for it, so I wen't to look into that.
Landed on the debricking method using QPTS on the CyanogenMod forums and I managed to find drivers for Windows 7, so no need for an XP computer!
There were some other Optimus L-series brickers who gave up on the process, but I have still some hope left.
Did all the work that had to be done, decompiled V20D KDZ for our device, converted the first 512 bytes of the partition.bin to .mbn, installed QPTS, and so forth.
Hooked up my phone to the pc holding the volume-down button, and QPTS actually recognised it as a phone in downloading mode!
Then that's where I got stuck. Using the HEX files from this thread, I get the following error:
Code:
Status: Software Download Aborted
Errors: Could not determine the HEX file's scrambling method. The file is invalid.
Do any of you have a clue on how get things working again?
The QPTS tool only lists MSM7x30 (eMMC) as ARMPRG to use for the phone in dowload mode, not the MSM7x27a we are using. Might this be part of the problem?
Any help is highly appreciated!
Can you go to emergency or download mode?
Battery taken out, hold the vol up + connect to usb, connected to the pc. Then you will see in a green screen with emergency mode.
Once your done that, be sure you installed the LG drivers, flashed through kdz.
You can use homero's v20 stock, it's already had cwm and unlock bootloader and v20 baseband.
http://forum.xda-developers.com/showthread.php?t=2214717
Sent from my LG-P700 using Tapatalk
vaikz said:
Can you go to emergency or download mode?
Battery taken out, hold the vol up + connect to usb, connected to the pc. Then you will see in a green screen with emergency mode.
Once your done that, be sure you installed the LG drivers, flashed through kdz.
You can use homero's v20 stock, it's already had cwm and unlock bootloader and v20 baseband.
http://forum.xda-developers.com/showthread.php?t=2214717
Click to expand...
Click to collapse
Nope, can't get into emergency mode, screen stays black, no matter what. So yeah, just flashing a new KDZ isn't an option. :crying:
balloon27 said:
Nope, can't get into emergency mode, screen stays black, no matter what. So yeah, just flashing a new KDZ isn't an option. :crying:
Click to expand...
Click to collapse
Does the kdz flasher recognized the phone? If it's turn on and connected to the PC.
balloon27 said:
Nope, can't get into emergency mode, screen stays black, no matter what. So yeah, just flashing a new KDZ isn't an option. :crying:
Click to expand...
Click to collapse
You should try launching emergency mode some more. Install lg drivers. Take out battery, hold Vol up button and plug in usb. Make sure port works.
Thanks for the replies, guys!
vaikz said:
Does the kdz flasher recognized the phone? If it's turn on and connected to the PC.
Click to expand...
Click to collapse
I can't turn the device on. When I connect it to the PC, Windows sees the phone as an 'Unknown Device', even with the latest LG drivers installed.
And by KDZ flasher you mean the BC2App, right?
Lukijs said:
You should try launching emergency mode some more. Install lg drivers. Take out battery, hold Vol up button and plug in usb. Make sure port works.
Click to expand...
Click to collapse
Tried it a dozen times, with different combinations too. Only thing that happens is the sound windows makes when a device is plugged in.
Any chance a method like this would work? If the .img.zx file would be edited for our device ofcourse.
Hey all,
I couldn't get any further debricking my phone myself, so I just brought it to a repair shop. I'm hoping they can do something using JTAG or something.
Regardless of getting my phone working again (hopefully), I would still love to see if we can find a way to debrick hard bricked devices. If we can find a solution, I'll volunteer for writing a tutorial
Sent from my Nexus 7 using xda app-developers app