Database Users

[Q] Rom download access

Hi,
I was following the guide to updating my HTC HD2 to Windows phone 7 7004 as it was suggested to start there.
I managed all the pre-requisites but have been halted at downloading the rom.
The host site seems to be unobtainable. Can someone please help me out with the files i need.
Power on your phone and don’t let go power button.
DFT MAGLDR Bootloader will be loaded.
Go to 10. Services.
Go to 4. UseLast24NAND.
Press Call button for YES.
Go to 5. USB Flasher.
Connect USB cable from PC to phone.
You should see Wait USB…USB.
At PC, enter HD2_Updatable_XBmod_Yuki_v2_native folder.
Right click on DWI.exe and select ‘Run as administrator’.
Click ‘Yes’ if User Access Control prompt up.
Follow onscreen instructions to install.
Phone will be rebooted after installation finished.
Disconnect USB cable from phone.
Follow onscreen instructions to setup Windows Phone 7 settings (time zone, date & time).
That’s all.
I am stuck with what i should do, if i cant get these files what are my options?
Thanks in advance for the help!

[Fixed] Can't unroot nexus

I am trying to unroot my Nexus S and relock the boot loader. I've followed multiple guides and tried them on different computers (mac & windows). Every time I am supposed to type in "fastboot oem lock" and every time the command prompt just says waiting for device and nothing happens
I've installed the usb drivers from the android SDK so I'm lost as to why this is happening
I'm running the I9020T on Wind
Fix: Turns out it was just a driver issue, following these instructions got it working for me
Part 1 - Drivers
1 - Download Android SDK
2 - Unzip & launch "SDK Manager.exe"
3 - Cancel the first popup & go to "Available packages" > "Third party Add-ons" > "Google Inc."
4 - Select "Google USB Driver package" & click "Install Selected"
5 - Once you're finished go to your SDK installation "extras\google\usb_driver" dir
6 - (MOD EDIT: Ignore this step for i9020A models) Open "android_winusb.inf" and add the following lines to both "[Google.NTx86]" and "[Google.NTamd64]" sections :
;
;Google Nexus S GT-i9023
%SingleAdbInterface% = USB_Install, USB\VID_18D1&PID_4E20
Click to expand...
Click to collapse
as described here [SOLVED] Google Android USB drivers - Nexus S SCLCD GT-i9023 not recognized
7 - Turn Off your SNS
8 - Make sure the SNS is connected to the PC via the USB cable
9 - Boot the SNS into the Bootloader Interface, by holding Volume UP & Power button
It reads LOCK STATE - LOCKED
Open Device Manager (or run devmgmt.msc) make sure you don't see this problem (windows failed to identify the SNS and install the correct drivers)
10 - Do a right click and select Update Driver Software
11 - Select Brose my computer for driver software
12 - Point it to your Android SDK installation "extras\google\usb_driver" dir
13 - Make sure to CLICK "Let me pick from a list of device drivers on my computer"
14 - Then from the list 3 choices select Android Bootloader Interface
15 - If it's installed properly it should show up like this (reboot is not required)
NOTE: if you encounter problems like question marks, unknown drivers, or exclamation marks eve after you have installed the drivers, download and try the USBDeview 32/64 to remove and uninstall all the junk USB devices from your computer/registry
Click to expand...
Click to collapse

Turn on usb debug inside the os.
Then do adb reboot bootloader
Once in bootloader do fastboot oem lock
Hope this helps
Sent from my Nexus S 4G using XDA

Unfortunately i've tried that, nothing happens after I enter fastboot lock

Once you unlocked your bootloader you can not lock it again.

Tom Foolery said:
Unfortunately i've tried that, nothing happens after I enter fastboot lock
Click to expand...
Click to collapse
Do you have a custom recovery installed? Did you try a different usb cable?

1. connect the USB cable directly to USB port on the laptop/desktop; dont connect via monitor USB or extension
2. Open device manager and check if the device is detected as ADB; you need to have the drivers installed
3. perform "fastboot oem lock"
or
Follow the step by step instructions here

zonesan said:
Once you unlocked your bootloader you can not lock it again.
Click to expand...
Click to collapse
Not true, i've done it...as have many others...

gullu101 said:
Not true, i've done it...as have many others...
Click to expand...
Click to collapse
Thanks very much, I always thought we can't lock back the bootloader.

gsrdemon said:
1. connect the USB cable directly to USB port on the laptop/desktop; dont connect via monitor USB or extension
2. Open device manager and check if the device is detected as ADB; you need to have the drivers installed
3. perform "fastboot oem lock"
Click to expand...
Click to collapse
I've tried these steps and I used the guide from nexusshacks but it didn't work.
Do you have a custom recovery installed? Did you try a different usb cable?
Click to expand...
Click to collapse
Although it probably didn't work because before I started the tutorial I installed a ROM which removed Clockwork recovery. I'm going to reroot my phone and try again from the beginning.
Edit: wait that's a lie, I did this a week ago so I'm not 100% sure what I did now, but I'm pretty sure I used the ROM from the guide

I've tried flashing a new recovery but I get the same "waiting for device" message
This makes me think it's a usb issue. I've been having usb issues for a while now, I've tried different cords and different computers. Is there any options I have left.
EDIT: Now I'm almost 100% sure the only thing standing in my way is the USB problems.

Try installing pdanet and using their drivers. Although i doubt this will work as im almost sure that the fastboot drivers arent the same as the adb drivers. Try disconnecting ng and reconnecting your phone on usb once you boot into bootloader.
Sent from my Nexus S 4G using XDA

Stuck in "Firmware Update" (NEW)

hi guys,
I wantet to change from the ressurection remix rom (lp) to the stock rom via a kdz file.
now my phone got stucked in the window "fimeware update"
it says " do not unpulg the usb connection until the process is complete" and "0%"
long pressing the power button to reboot or removing the battery will not help. it will only boot the phone into the " fimeware update" window(the Download mode window is not shown) again.
lg flashtool doesn't recognize it. but when i plug it into my computer its shown in the device manager section as "lge android phone". so there is maybe hope for me.
thank you so much for the support!

sandrahum said:
hi guys,
I wantet to change from the ressurection remix rom (lp) to the stock rom via a kdz file.
now my phone got stucked in the window "fimeware update"
it says " do not unpulg the usb connection until the process is complete" and "0%"
long pressing the power button to reboot or removing the battery will not help. it will only boot the phone into the " fimeware update" window(the Download mode window is not shown) again.
lg flashtool doesn't recognize it. but when i plug it into my computer its shown in the device manager section as "lge android phone". so there is maybe hope for me.
thank you so much for the support!
Click to expand...
Click to collapse
did you set it up as port com41. read this post. its a tot method but it xplains how to set up to detect phone.
1. With phone NOT plugged into a USB Cable, Hold the Power button to turn off phone
2. Plug your USB cable into your computer
3. Hold the Volume UP Button on your Phone
4. While Still Holding the Volume UP button, plug in the USB cable to your Phone
5. Continue to hold the Volume UP button until your phone enters Download Mode
6. If this does not work, pull the USB cable and start from #1 of this section
Step #3: Change Com Port to 41
1. With your phone STILL in Download Mode and STILL Plugged into Computer
2. Go into Device Manager
---a. Press and hold your Windows Key (Between CTRL and ALT)
---b. Tap the ‘Pause/Break’ Key (Usually Top Right of Keyboard, might be different on yours)
---c. Click on ‘Device Manager’
3. In the Device List, scroll down to ‘Ports (COM & LPT) and double click to expand
4. Find the ‘LGE AndroidNet USB Serial Port (COM4)’ (Your COM Port Number might be different, that’s OK)
5. Double click to open the port
6. On the Tabs at the top of that screen, click on ‘Port Settings’
7. Click on ‘Advanced…’
8. Click on the Com Port number to drop down the list
9. Scroll down to ‘COM41’ and select it
10. Click ‘OK’ Button to save that
11. Click ‘OK’ Button to close the Com Port Properties
12. Close the Device Manager
13. Close the System Window
14. Go back to the Desktop
15. That’s it, You’ve Changed the Com Port to 41

thanks

raptorddd said:
did you set it up as port com41. read this post. its a tot method but it xplains how to set up to detect phone.
1. With phone NOT plugged into a USB Cable, Hold the Power button to turn off phone
2. Plug your USB cable into your computer
3. Hold the Volume UP Button on your Phone
4. While Still Holding the Volume UP button, plug in the USB cable to your Phone
5. Continue to hold the Volume UP button until your phone enters Download Mode
6. If this does not work, pull the USB cable and start from #1 of this section
Step #3: Change Com Port to 41
1. With your phone STILL in Download Mode and STILL Plugged into Computer
2. Go into Device Manager
---a. Press and hold your Windows Key (Between CTRL and ALT)
---b. Tap the ‘Pause/Break’ Key (Usually Top Right of Keyboard, might be different on yours)
---c. Click on ‘Device Manager’
3. In the Device List, scroll down to ‘Ports (COM & LPT) and double click to expand
4. Find the ‘LGE AndroidNet USB Serial Port (COM4)’ (Your COM Port Number might be different, that’s OK)
5. Double click to open the port
6. On the Tabs at the top of that screen, click on ‘Port Settings’
7. Click on ‘Advanced…’
8. Click on the Com Port number to drop down the list
9. Scroll down to ‘COM41’ and select it
10. Click ‘OK’ Button to save that
11. Click ‘OK’ Button to close the Com Port Properties
12. Close the Device Manager
13. Close the System Window
14. Go back to the Desktop
15. That’s it, You’ve Changed the Com Port to 41
Click to expand...
Click to collapse
thanks for the answer. i followed your instructions but that doesn´t changed the situation. the phone still shows the "fimeware update" window.
the "download mode" window as we know comes before the "fimeware update" window but now it doesnt come anymore.
do you know how i can get a new working rom on the phone now ? :/

sandrahum said:
thanks for the answer. i followed your instructions but that doesn´t changed the situation. the phone still shows the "fimeware update" window.
the "download mode" window as we know comes before the "fimeware update" window but now it doesnt come anymore.
do you know how i can get a new working rom on the phone now ? :/
Click to expand...
Click to collapse
not so sure what to do next. this are suggestions
To get download mode maybe you could try nuke download in srk tools..

raptorddd said:
not so sure what to do next. this are suggestions
To get download mode maybe you could try nuke download in srk tools..
Click to expand...
Click to collapse
doesn´t work eighter.
maybe this information helps: at the "fimeware update" window ther is a gray boy at the bottom and it says "USER B47" or another number.

sandrahum said:
doesn´t work eighter.
maybe this information helps: at the "fimeware update" window ther is a gray boy at the bottom and it says "USER B47" or another number.
Click to expand...
Click to collapse
never seen that letters.. post your problem here, am sure youll get help there.. and hopefully fix it. tell him everything that has happened and the screen error.. and once you fix post update so others could see fix.
http://forum.xda-developers.com/showthread.php?t=2432476

I Have a Similar situation, after a OTA update I get stuck on bootloop and into download mode, windows just detected the phone like "LG Modem #2"
It a LS980.

MSM8994DownloadTool.exe Won't Work For My OPT

MSM8994DownloadTool.exe Won't Work For Me
I need help.
My phone is stuck on the fastboot screen, meaning I can only Power if off and into Fastboot (using the Vol+ and Power buttons). Other than that, it does nothing. I cannot get into the OS at all, which means I can't enable USB debugging or anything. Fastboot recognizes my device, which is a OnePlus Two), but ADB won't, nor will my Windows 7 PC as a USB device. With that in mind, I followed all the steps in the posted guide. I get all the way to running the "MSM8994DownloadTool.exe" and nothing happens. Its as if the Recovery Tool doesn't even see my device. So, I'm really stuck and don't know what to do.
For clarity, here's exactly what I did (see below). I get all the way to Section B, Step 2 and that's where it breaks down. There's no different line, and no process ever runs, even after waiting 30 minutes. I ran the tool as Administrator, but still no luck. Can anyone help me? Just as additional info, my Mac also does not recognize my OPT as a USB device. Also, I tried my backup USB-C cable from the OEM, with the same results.
A. Install the Certificates followed by the Qualcomm drivers.
1. Restart your computer with Driver Signature Enforcement Disabled (Advanced Startup) Let me Google it For You
2. Open the folder "qc" and install the Test Certificate in the following Stores: Trusted Root, Trusted Publisher, Third-Party Root and Personal
3. Run the Qualcomm setup wizard (also located in the qc folder)
4. When completed, restart your PC again with Driver Signature Enforcement Disabled (Advanced Startup)
5. Turn off your phone and disconnect the USB cable from the phone.
6. Hold vol-up and plug in the USB(Do not press Power button). The screen will stay black but you will hear a sound from windows that a device is attached.
7. The driver should now automatically install. If not, go to device manager and right click "Unknown Device" and click "Update Driver" Search up the QC folder and press ok. The driver should now install. (Got the RELINK issue? Take a look here: http://forum.xda-developers.com/show...1&postcount=46)
B. Flashing Process
1. Open the OnePlus2_14_A.11_151211 folder and open "MSM8994DownloadTool.exe"
2. Look if your phone is detected in the list. everything is Chinese but you will see one row with different chinese text from the rest within the list. If not, recheck if driver is detected in Device Manager (If not, go back to Step A - Line 4).

I think you have a bad download, try downloading it again and download the 3.0.2 version if you can.

Phil01234 said:
MSM8994DownloadTool.exe Won't Work For Me
I need help.
My phone is stuck on the fastboot screen, meaning I can only Power if off and into Fastboot (using the Vol+ and Power buttons). Other than that, it does nothing. I cannot get into the OS at all, which means I can't enable USB debugging or anything. Fastboot recognizes my device, which is a OnePlus Two), but ADB won't, nor will my Windows 7 PC as a USB device. With that in mind, I followed all the steps in the posted guide. I get all the way to running the "MSM8994DownloadTool.exe" and nothing happens. Its as if the Recovery Tool doesn't even see my device. So, I'm really stuck and don't know what to do.
For clarity, here's exactly what I did (see below). I get all the way to Section B, Step 2 and that's where it breaks down. There's no different line, and no process ever runs, even after waiting 30 minutes. I ran the tool as Administrator, but still no luck. Can anyone help me? Just as additional info, my Mac also does not recognize my OPT as a USB device. Also, I tried my backup USB-C cable from the OEM, with the same results.
A. Install the Certificates followed by the Qualcomm drivers.
1. Restart your computer with Driver Signature Enforcement Disabled (Advanced Startup) Let me Google it For You
2. Open the folder "qc" and install the Test Certificate in the following Stores: Trusted Root, Trusted Publisher, Third-Party Root and Personal
3. Run the Qualcomm setup wizard (also located in the qc folder)
4. When completed, restart your PC again with Driver Signature Enforcement Disabled (Advanced Startup)
5. Turn off your phone and disconnect the USB cable from the phone.
6. Hold vol-up and plug in the USB(Do not press Power button). The screen will stay black but you will hear a sound from windows that a device is attached.
7. The driver should now automatically install. If not, go to device manager and right click "Unknown Device" and click "Update Driver" Search up the QC folder and press ok. The driver should now install. (Got the RELINK issue? Take a look here: http://forum.xda-developers.com/show...1&postcount=46)
B. Flashing Process
1. Open the OnePlus2_14_A.11_151211 folder and open "MSM8994DownloadTool.exe"
2. Look if your phone is detected in the list. everything is Chinese but you will see one row with different chinese text from the rest within the list. If not, recheck if driver is detected in Device Manager (If not, go back to Step A - Line 4).
Click to expand...
Click to collapse
I've bricked my op2 a while ago. I'm a real noob so I don't know if it will work but have you installed the adb mac drivers or try "fastboot continue" while in fastboot. Just don't give up and keep try. You have absolutely nothing to lose.

chintu1234 said:
I think you have a bad download, try downloading it again and download the 3.0.2 version if you can.
Click to expand...
Click to collapse
Thank you very much. I have the latest version, but still nothing. I don't know if this has anything to do with it, but my OPT wasn't being recognized as a USB device even before I screwed up. That leads me to believe my OPT USB is maybe not functional. ADB doesn't recognize it at, nor will the MP...DownloadTool.exe. I'm guessing it is just hard-bricked since I have no other way (besides USB) to interface with the device.

Phil01234 said:
Thank you very much. I have the latest version, but still nothing. I don't know if this has anything to do with it, but my OPT wasn't being recognized as a USB device even before I screwed up. That leads me to believe my OPT USB is maybe not functional. ADB doesn't recognize it at, nor will the MP...DownloadTool.exe. I'm guessing it is just hard-bricked since I have no other way (besides USB) to interface with the device.
Click to expand...
Click to collapse
Try connecting your OPT to some other guys pc and see, it may be because of your pc's end that its not getting connected.
And if the same thing happens with a different pc then yeah your usb port or something is fried. Try going to service center if the same thing happens again.

CM 12.1 on Note 3: Usb is now disconnected

Hi to everyone, I'm having bad time finding a solution to my problem, but for now nothing helped me.
I've CM 12.1 installed on my Note 3. Since I installed it to my phone, I've never be able to connect my phone to the computer.
When I click on settings-->storage-->usb computer connection, it says:
"USB is now disconnected".
This doesn't allow me to set the usb connection, and so my pc doesn't recognize my phone.
On my pc, it says: "Unknown device, code 43" (looks like it doesn't have drivers).
I've tried everything:
1) different cable, pc, usb connected directly to main board;
2) reboot phone;
3) all the steps about enabling and disabling developer option:
**********************************************************************************************
To see the USB computer connection options:
1. Developer>Disable USB debugging.
2. Reboot.
3. Connect to PC.
4. Settings>Storage, press the overflow button (three dots).
If that does not do it, then:
1. Disable developer options.
2. Reboot.
3. Connect to PC.
4. Settings>Storage, press the overflow button (three dots).
5. Re enable developer options. (About Phone>Build Number-6x)
**********************************************************************************************
But, apparently, nothing changed.
I want to solve this situation becasue I need to install stock firmware now.
Another problem is that I've tryed to install twrp recovery (using flashify), but this made my phone go in recovery bootloop, and so now, It seems I can't access no custom recovery.
If there is no solution to the problem above, at least help me to install the right twrp recovery (if compatible with cyanogen mod 12.1), so I can try a stock firmware flashing using it.
Thanks for answering, hope someone can help me.
Note: I've installed 12.1-20151120-NIGHTLY-hlte version, and, if I search update it says that there are some updates, but I cannot upgrade my system.

Have you installed the drivers on the PC ??

Usb cable is damaged or lack of driver on PC.