Urgh. Help a newb. Had to start from scratch. - HD2 Android Q&A, Help & Troubleshooting and Genera

I'll try to make this short. So a few months ago I did a little research and spent a day getting nand android on my hd2 for the first time. I truly have no idea how I accomplished this ha. Anyways up until a week ago it was running fine. Now I have had a lot of freezing and powering down/up issues. I made the call to start over and find a new rom. So I put the stock t-mobile rom back on.
I know there's a bunch of guides on here, and I tried my best to take it all in but I'm still confused. I want to install the Hyperdroid gbx nand rom but I feel clueless where to start.
Could someone please provide links to each of the downloads in steps? The stickied definitive guide is nice but I just don't know where to get each of the downloads.
Like....from stock I need A) different radio B) hspl3 c) magdlr 1.13 (no need to provide this I got it) d)clockwork
Is there a custom rom that I needed to before I put android on and when do I install this.
Sorry for being an ignorant, computer illiterate fool, I just really want android back on my phone and running smoothly. Actually now that I put wm6.5 back on I just want android on here period. I don't care if it has the same issues as last time haha.
Thank you to anyone in advance. All of this is overwhelming to me so I apologize again.
EDIT:
Since I went back to 3.14 do I not need to install a new radio? Also I had Magldr 1.1 before.

Related

Question about ROM Flashing

I was just wondering, if I want to flash another ROM while I already have a ROM being flashed (non stock) do I just flash the new ROM that I want or do I have to run HSPL3 again or what do I do?
Sorry if this has been answered already, I tried searching but I never got an answer for this specific question, but if its on here, just point me in my way and close the thread.
Thanks
Also, where can I download HaRet and ClrCad, i want to give the android thing a try.
thanks, once again.
once you flash hspl you will remain unlocked till you flash a factory rom.
IT's in the flashing guide
Android question I'm not even going to answer that. read guide to android and HD2
Alright, cool man.
And since you asked about android and HSPL in the same post, I'll just make sure you're aware that running haret (and therefore android), doesn't require HSPL'ing your HD2.
Like TM said, just get yourself lost in the new HD2 Android forum section, and the guides there will tell you everything you need to know

[Q] Deaf dude need help!

I need some help. I wasn't sure what do I need to install the android on hd2? I know Froyo 2.2 is the latest update for Android. But do I need to put some special rom in it or what? HSPL? SPL? I don't even know what are these. Can anyone just make a short simple instruction how to install android on hd2?
instant gratification is why everything sucks. work for your knowledge read a little bit and you'll see that other people have put hundreds of articles just for us. search and you'll find them even quicker. i can't tell you how many times they're posted and re posted everywhere.
if you're going to be on a forum at least learn how to use it this is just a waste.
Try Your luck there:
http://forum.xda-developers.com/showthread.php?t=732380
But be sure You have the knowledge and ability to setup Your HD2 newly if You crash it. It took me an entire night stuck with the Radio-flash which corrupted my HD2 and I had to go back to stock-ROM without Froyo running.

[Q] Clarifying Android for my HD2

Hi all,
I was wondering if you guys could help me getting Android on my HD2.
I've been digging this forum for several weeks now, there is so much information that I don't know what to do!
I've got a European HD2, not the T-Mobile one. The reason I would like to have Android running on it is because Windows 6.5 hangs quite often and it's too slow in my opinion.
After finding out how to check my SPL version, I found that I have 3.03.0000. Is it actually possible to run Android on it?
I've also seen some topics about dual boot and switching back and forth between Android and WM. That's not a requirement for me, I actually prefer just running Android without having the opportunity for WM.
Some specification which I don't know it's useful, but I'll post them anyway;
- OS Version; 5.2.21913 (21913.5.0.94)
- Manila-Version; 2.5.20181527.0
- ROM Version; 3.14.404.2 (04666) NLD
- ROM Date; 10/06/10
- Radio Version; 2.15.50.14
I would appreciate your help a lot!
Kind regards,
Jerome
Flash from SPL to HSPL might going to work, but work better with custom ROM along with the HSPL.
Some user reporting that they can run Android with their stock ROM and SPL, but I don't know. Try it. You should wait a few minute for the first boot....possible at least 5.
If it don't work, then I hope you use the statement I mention in the first sentence.
Could you tell me what do you and what SPL and HSPL is exactly?
I don't have much knowledge yet, but I'm willing to learn!
Thank you for your reply anyway!
If you are willing to learn then you best option is to actually read the threads that already exist instead of creating a pointless one.
First go into the HD2 Rom thread and learn how to get HSPL on your phone and a custom rom and updated radio.
After yu have done that come back to the Android sections and learn how to boot android.
First.. Check what ROM you have currently. By the looks of it with radio 2.15.50 you look to have the latest ROM from HTC installed. Unfortunately there is no HSPL Software for the latest ROM from HTC so you will have to downgrade your rom which will let you use HSPL3 (Linkage)
SPL is the "software" on your phone that stops you flashing non HTC Roms. You use a utility called HSPL (above) to install HSPL on your phone to enable you to flash a custom rom.
Once you have HSPL on you can them flash a custom rom from the forums. I use the OzDroid 1.11 as it has been very stable at running android.
Once that is Flashed to your phone you will need to choose which android version you require. I use MDJ FroYo HD V4.3. Download it and copy the ANDROID folder onto your SD Card.
Re-boot OzDroid and you will be presented with the Choose screen. Windows or Droid. Select Android and it will boot into android. You will need to wait 5-15 mins for android to boot on first run.
Hope this helps.
TheATHEiST said:
If you are willing to learn then you best option is to actually read the threads that already exist instead of creating a pointless one.
First go into the HD2 Rom thread and learn how to get HSPL on your phone and a custom rom and updated radio.
After yu have done that come back to the Android sections and learn how to boot android.
Click to expand...
Click to collapse
man its not that easy, if someone has little background knowledge in all this all the unfamiliar information and new terms can be too confusing. Sometimes you just have to ask questions...
...although i do understand that there are probably thousands of posts started by asking the same exact questions ("which is the best android rom for HD2")and that can actually make it that much harder to wrap ones head around.
Do you need WM ROM, or can u run just Android?
TheATHEiST said:
If you are willing to learn then you best option is to actually read the threads that already exist instead of creating a pointless one.
First go into the HD2 Rom thread and learn how to get HSPL on your phone and a custom rom and updated radio.
After yu have done that come back to the Android sections and learn how to boot android.
Click to expand...
Click to collapse
Q: Do you have to load a "custom rom", I assume you mean WM ROM?
Isn't there a way to load Android straight onto the EPROM Memory of your phone, so that only Android runs and not the full WM in the background? Surely that would save RAM and battery?
I found this thread useful, also trying to wade thru the info.
Thanks
farcry27 said:
Q: Do you have to load a "custom rom", I assume you mean WM ROM?
Isn't there a way to load Android straight onto the EPROM Memory of your phone, so that only Android runs and not the full WM in the background? Surely that would save RAM and battery?
I found this thread useful, also trying to wade thru the info.
Thanks
Click to expand...
Click to collapse
no there isnt a way to do this yet without WM on the phone as well.
however, the "full WM" is not running in the background, its just needed to get the linux module started and then boot Android. Nothing is really "running in the background" but it is running from the sd card.
hope some of this helps.
dezaras6 said:
no there isnt a way to do this yet without WM on the phone as well.
however, the "full WM" is not running in the background, its just needed to get the linux module started and then boot Android. Nothing is really "running in the background" but it is running from the sd card.
hope some of this helps.
Click to expand...
Click to collapse
Thanks for the reply.
Is there then a way to get both android and WM on the ROM of the HD2. Since its about 512MB, there won't be space for much else, but that should save the battery, since android wont be running from the SD card.
5haddex;
Thank you so incredible much on helping me here! I've got OzDroid running now, it looks awesome already, now I need to find my preferred Android built, but that shouldn't be a problem.
Again, thank you so much!
I've got OzDroid up and running now, works great too!
But when I try to boot into Android with the provided CleanDROID, or with CLRCAD and hared, the phone hangs after showing the command line;
Jumping into custom kernel...
Click to expand...
Click to collapse
Even when I let the phone untouched for 6 hours, it won't do anything.
I've tried several Android builds, also trying to "repair" startup.txt with CleanDROID which gives me an error too.
Any thoughts? Maybe try another custom rom? Any tips or links on that one?
Cheers
edit;
what about the EnergyROM with Sense 2.5 Reference?
http://forum.xda-developers.com/showpost.php?p=8581816&postcount=3
Anybody please?
I would appreciate your help a lot!
Different Android builds don't fix the problem too. HSPL 2.08 running..
I've changed my radio to 2.10, the HD2 proceeds to the HTC booting logo, but stays there for an hour now...
Any ideas?

[Q] [Newbie] Need full guide from start to install WP7

I just got my HTC HD2 today after selling my iPhone 4. I need a full guide from start to end on how to install window phone 7 precisely please as I don't want to brick my new phone !
Anyone nicely to help this newb?
(Reason why I sold my iPhone 4 is that I had iPhone, iPhone 3GS and iPhone 4. And it does get boring after awhile and I heard about the awesome HD2 running shiz loads of OS )
MrPhilo said:
I just got my HTC HD2 today after selling my iPhone 4. I need a full guide from start to end on how to install window phone 7 precisely please as I don't want to brick my new phone !
Anyone nicely to help this newb?
(Reason why I sold my iPhone 4 is that I had iPhone, iPhone 3GS and iPhone 4. And it does get boring after awhile and I heard about the awesome HD2 running shiz loads of OS )
Click to expand...
Click to collapse
Dude, your asking for trouble on this one, see when you started this thread did you notice the the list of similar threads that comes up?
Its been asked time and time again and some folk on here can get very very vocal when people keep asking the same questions without looking at the quite obvious theads and stickies detailing what you need to do
Another question, have you searched at all? ok i see the search function is still down so will let you off that one, but there are various stickies at the top of the Q&A section for WP7 that will help
Im not going to detail everything you need to do, but i will give you a basic list, you can find everything you need either on the stickies on the various HD2 forums, or in the Wiki, remember most of what you need to do before you even think of installing WP7 is on the standard HD2 forums.
Anyhow, here goes, (note whilst you cant search on xda developers you can (and i always use this because its much better) seach via google, use strings like "XDA DEV LEO install HSPL")
first things first you need to unlock the device, so you will need to find and follow the directions for installing HSPL
you will then need to install the correct Radio, if you have the TMOUS 1024MB HD2 you must be very careful as flashing incorrect Radio will give you a brick, most HD2s are not this version unless you live in the states. search the HD2 WP7 stickies to find out which radio
then you will need to install the MAGLDR 1.13, use google if the XDA search is nackard, search for strings like "XDA DEV LEO MAGLDR install how to"
once thats taken care off your ready for WP7, boot to MAGLDR and get it ready for a USB flash and away you go.
Im not doing this to be rude, because i could have just as easily wrote down eveything you need to do, im doing this to help you, if you read the threads you will "learn" whats going on, you will see some of the issues other people have had and you will see how they fixed them, me telling you what to do wont teach you anything and you will be back on here starting new threads about something equally well documented.
http://forum.xda-developers.com/showthread.php?t=923997
note, its very unlikely you will brick your device, unless you have a 1024MB version and flash the wrong radio, more often that not, when people report bricked devices they simply have to go to boot loader mode and flash a new ROM, a stock ROM would put you right back to a factory default, radio and all. so dont panic about that, there is also the SD card flash if you cant do it via USB for any reason, but in all my years ive never had to do that.
oh an use a class 2 or 4 SD card, might not work but its a better chance than others.
Hey sorry about that, I tried searching as mention by you which didn't work. I thought the stickies threads was just rules, didn't know it includes links.
Also where can I find these radios on xda instead of some other website?
Also what's the difference between 512MB and 1024MB? Well of course it's double memory.
My phone is from UK, so i guess it's a European model?
I know I could search for these information but I thought this might show up on google search for other newbies. Thank you for helping me
1024=Tmous=USA
512=Rest of the world so you have a 512 (rom , not ram)
You can find all radios in the wm6.5 dev section (HD2 is a wm6.5 phone after all ^^ )
two words mate,
read up.
MrPhilo said:
Hey sorry about that, I tried searching as mention by you which didn't work. I thought the stickies threads was just rules, didn't know it includes links.
Also where can I find these radios on xda instead of some other website?
Also what's the difference between 512MB and 1024MB? Well of course it's double memory.
My phone is from UK, so i guess it's a European model?
I know I could search for these information but I thought this might show up on google search for other newbies. Thank you for helping me
Click to expand...
Click to collapse
good luck!
Look, if you have questions then ask but make them specific, like the two you just gave and the radios arent on a very obvious location as ^ has mentioned, if its a UK phone you have nothing to worry about, WP7 cant use the extra 512MB of ROM anyway
remember though, google is your friend!
try search for "XDA DEV LEO radios" on google without quotes
the one you want will be the first thread or if not it will be within the top 5 XDA DEV results
same for HSPL and MAGLDR
if you get stuck youve had a look about an cant find what you are looking for then drop a question, an just say, look ive tried this this and this but im buggered if i can work it out, can you guys help
and perhaps once your done you could give complete step by step guide including all links and downloads, because your right, its not all in one place but it is all there.
One thing you MUST NOT DO is use a USA Raido to update your 512 HD2 cause you will brick your phone and it's gone till you find someone who can jtag your
phone and fix it which will cause you alot of money. Make sure you read up before
trying anything.
WP7 is quite tempting, I agree.
Though, I must admit, I'd be a little wary about installing it, as it seems like it's still quite new.
If you want to give it a shot though, I recommend picking a build out of those listed here, and reading through all the instructions and comments before deciding to install it.
Also, before you try anything, be ABSOLUTELY SURE your stuff is backed up. I can't say how many times I've lost things on my phone because I've accidentally updated a ROM without say, backing up my contacts.
I now use Google Sync to keep all my Windows Mobile and Android contacts backed up, so this doesn't happen.
I'd recommend setting up a google account, and following these instructions to backup your contacts with your google account prior to trying anything.
Anywho, bestest of luck!
CrAzYiaN said:
One thing you MUST NOT DO is use a USA Raido to update your 512 HD2 cause you will brick your phone and it's gone till you find someone who can jtag your
phone and fix it which will cause you alot of money. Make sure you read up before
trying anything.
Click to expand...
Click to collapse
europe can flash 2.xx.50.xx and 2.xx.51.xx on 512mb UK version
ok, since this is the only thing that can give you a really bad day
download this radio here
http://www.multiupload.com/QP0IWGY42F
you will find everything you need about radios on this thread here
http://forum.xda-developers.com/showthread.php?t=611787
The directions are on that link above but basically you will also need to get two other things
Custom RUU, found here
http://forum.xda-developers.com/showpost.php?p=4798017&postcount=1
that is the flashing program its self, when you download a radio it wont have an installer, it will be just a single file, you will need it to flash any WM6.5 ROM or radio but usually the ROMs will have one included.
HSPL, found here
http://forum.xda-developers.com/showthread.php?p=5279234#post5279234
this is the really important bit, this "unlocks" the device and gives you a layer of protection should you screw it up, which is most unlikely anyway download the attached file in post number 4, its the most recent and covers pretty much anything
righty once you have all that on your PC in a nice easy to find location its time to start modding it!
HSPL first, download the program and follow the instructions on the HSPL thread, which is more or less, run the program with your phone connected and charged up, IF it cant do it then it will tell you. For WP7 you MUST install HSPL2.08 when prompted.
once done, you will not notice any difference.
now follow the directions for installing the radio you downloaded use the CustomRUU, firstly extract the file then rename the extracted file to "RUU_Signed.nbh" and flash with the CustomRUU by just placing them both in the same folder (no other files in there) and running the customRUU
THAT is the hard part done, next is MAGLDR, let us know how you get on with that
MrPhilo said:
I just got my HTC HD2 today after selling my iPhone 4. I need a full guide from start to end on how to install window phone 7 precisely please as I don't want to brick my new phone !
Anyone nicely to help this newb?
(Reason why I sold my iPhone 4 is that I had iPhone, iPhone 3GS and iPhone 4. And it does get boring after awhile and I heard about the awesome HD2 running shiz loads of OS )
Click to expand...
Click to collapse
Mr Philo have you got your activation code for WP7? Just dont waste your time flashing WP7 until you get a code from Microsoft.
And yes the search engine on here is not very good, but as the others said use Google.
Also when I started using XDA, i spent loads of time reading through most of the threads. And yes I read a lot before I even started to think about flashing.
But we were all Noobs, and we will help you out when you get stuck?
Also go to this thread for all info :http://forum.xda-developers.com/showthread.php?t=971478
Hey guys thanks for all the information! I just downloaded all the files that are needed and named them step by step in a folder.
First I can't check what SPL version I have. I did hold down the lower volume button down, but it only brings me to the 'vibrate, silent etc adjustment' (Yes i was holding it for 20 seconds). And it says do a reset, while holding down?? How can I do that. Sorry I know im failing already !
EDIT: Flower thankyou for the thread, but I was using it as well ! But its just the SPL bit im confused at :\
Oh yeah, I have already got a code yesterday from the UK Microsoft, was very easy
Start in bootloader mode. Shut down the phone / push and keep the vol down button and press the power button once...and wait 5s
Edit: Just saw its already answered above
Sakem said:
Start in bootloader mode. Shut down the phone / push and keep the vol down button and press the power button once...and wait 5s
Click to expand...
Click to collapse
Thanks, my SPL is 3.03.000!! So I need to flash a ROM or something to get SPL 1.42.0000?
I currently don't have a SD card with me right now as I left it at home and will be going home next week. So is there anyway I can flash a ROM without using a sd card?
You need to flash an old rom to get an old spl, then flash HSPL 2.08.
No need for a sd for this, juste start your phone in BL mode and execute the ruu from your pc
Which ROM should I download from the HTC website? I mean theres a few ROMs for HTC HD2.
Theres ROM Upgrade for HTC HD2 - 2010-10-11
ROM Upgrade for HTC HD2 - 2010-01-25
etc?
Sorry for all the questions !
I used this ROM http://forum.xda-developers.com/showthread.php?t=944995 (the Standard Version) as it already have the phone unlocked etc and have no problems with it...and had no problems activating it as well. However a lot of the other ROM's now also have your phone already unlocked etc...and most ROM's at the moment should be pretty similar as it uses the same base files.
Edit:
However...on this ROM...one of the first XAP files you should load is the Connection Setup.xap
omarza said:
I used this ROM http://forum.xda-developers.com/showthread.php?t=944995 (the Standard Version) as it already have the phone unlocked etc and have no problems with it...and had no problems activating it as well. However a lot of the other ROM's now also have your phone already unlocked etc...and most ROM's at the moment should be pretty similar as it uses the same base files.
Click to expand...
Click to collapse
Sorry I mean't from HTC website to get the SPL 1.4... , I don't know which one to download on the HTC website!
Have a look here http://forum.xda-developers.com/showthread.php?t=898128 and at the bottom you will see a post explaining a bit more with this link to ROM's http://forum.xda-developers.com/showthread.php?t=623283
Let me know if that's what you are after?
yes that totally solved all my issue! thank you very much

[Q] Restoring Stock /or better/ Win6.5 ROM to HTC HD 2

Hello,
I do apologize for opening a new thread, but I wasn't able to find a fully comprehensive guide on the website /probably due to me not searching properly, but the situation is a bit urgent./
A couple of years ago I flashed a NAND ROM to my HTC HD2 (a CoreDroid ROM), but now I need to return it to its factory settings. Since it has been a while since I fiddled with ROMs, rooting, etc. I have completely forgotten how the whole thing works. So, now to the point.
I have a CoreDroid ROM installed. I can't remember where to check the Radio version of the phone, however I know I have ClockWorkMod and Cotulla HSPL 2.08 installed. I need to return the phone to Win6.5 OS with the original/or better custom/ ROM, Radio and HSPL (which, in spite of at least half an hour of searching, I was unable to find a download for, neither here or on the HTC website...).
I will also ask kindly for someone to post a link or explain to me step by step how to do that properly. I apologize if the threat is redundant, but, like I said, I need this to happen ASAP. My fiance is leaving the country tomorrow and has lost her phone and, unfortunately, this is the only spare we have, but it isn't working properly with the Android NAND ROM.
If anyone is kind enough to answer my request, many thanks in advance!!!

Categories

Resources