hi,
recently installed android with the MDJ Desire HD v4.6 rom build. while i get that the phone if powered off and on reverts back to windows - the phone seems to do this even without that and if left for too long (like overnight) it just switches back to windows and needs me to launch the build again. any suggestions?
thanks
agrox said:
hi,
recently installed android with the MDJ Desire HD v4.6 rom build. while i get that the phone if powered off and on reverts back to windows - the phone seems to do this even without that and if left for too long (like overnight) it just switches back to windows and needs me to launch the build again. any suggestions?
thanks
Click to expand...
Click to collapse
Is it restarting on it's own? Technically, I don't think it can just shut Android down and go back to WinMo on its own. If it's restarting on its own, then there's a deeper, underlying condition that you need to take care of.
So if it just reboots itselft, your suffering on random reboots, pretty sure. Could you give us more information about your build, radio, HSPL and so on?
And another tipp, you could install an automatic bootloader in WinMo, like this one here: Exceller Build Loader.
This is the one I always used for SD builds.
hi
assume it rebooted as it happened in the middle of the night - guess it couldn't really switch to winmo without a reboot.
build: MDJ Desire HD v4.6 rom build
any ideas on how i can get the rest of the details without going back into winmo. donloaded a systems app but doesn't give me radio informaiton - says unavailable.
thanks for your help
not sure why but it just rebooted so here is the information
radio: 2.15.50.14
rom: 3.14.405.2(04666)wwe
not sure on where i can get the hspl info but think i installed hspl 2.08.
thanks
agrox said:
not sure why but it just rebooted so here is the information
radio: 2.15.50.14
rom: 3.14.405.2(04666)wwe
not sure on where i can get the hspl info but think i installed hspl 2.08.
thanks
Click to expand...
Click to collapse
Seems to be a normal combination.. Does it just randomly reboot?
And did you tried another SD card?
Related
I was trying darkstone HD2froyo. After that i wanted to go back to Winmo. But in Winmo Sense did not load anymore. So i made a Hardreset, but the problem didn't go away.
I decided to flash a new ROM. After flashing i first could use my HD2 normally. But after a while it stopped responsing after going to sleep. Also a Hardreset didn't solve the problem, rather it became worse. First it stopped booting on the orange Windows screen. Now it stops on the white HTC screen, where it says "quietly brilliant".
Is there anything more i can try?
honestly I always turn off sense and revert back to titanium before running android. something about haret makes it run wonky. the devs say haret shouldnt effect your rom as it isnt altering anything.
willfriede said:
I was trying darkstone HD2froyo. After that i wanted to go back to Winmo. But in Winmo Sense did not load anymore. So i made a Hardreset, but the problem didn't go away.
I decided to flash a new ROM. After flashing i first could use my HD2 normally. But after a while it stopped responsing after going to sleep. Also a Hardreset didn't solve the problem, rather it became worse. First it stopped booting on the orange Windows screen. Now it stops on the white HTC screen, where it says "quietly brilliant".
Is there anything more i can try?
Click to expand...
Click to collapse
I had this problem once too.
Fixed it by removing Android from the SD card, hardresetting WinMo untill it was fully functional again, then plug in the SD and reinstall Android from scratch.
It could be that some files on the SD interfere with Sense from loading..
Good luck!
I have the same problem. but, I flashed mine to another WinMo ROM, now the problem disappeared. I am just waiting for a full version Froyo to flash. Not trying another Android until then.
Did you flashed a ROM that has already worked stable on your phone or did you use a new one? Maybe its a problem of the new ROM and not of Android...
Sometimes (at least for my problems with Android) it also helps to 'cleanup' (backup data, format and reload only needed data) your SD card.
Good luck...
I had the same problem 30 min ago, I had Artimis v25 WWE on a 2.10.50.19_02 Radio..
I fixed the problem by,
* Removing SIM and SD Card
* Hard Reset device
* Task 29'ed it
* Flashed new Radio
* Flashed Miri's rom v17
Now I'm good to go again and didnt touch my android i had on my SD Card,
the only reason i still want WinMo, is because of the .avi playback... Android doesnt seem to be friends with .avi or divx extensions
Thanks for your responses, but i think my HD2 is dead. I can not boot into Winmo anymore. I removed the SD and the SIM, i made a hard reset (several times) but Winmo is not booting. All it is showing is the orange Winmo screen and the progress bar.
/edit
I can not execute Task 29 because i can't make a Active Sync connection anymore.
willfriede said:
Thanks for your responses, but i think my HD2 is dead. I can not boot into Winmo anymore. I removed the SD and the SIM, i made a hard reset (several times) but Winmo is not booting. All it is showing is the orange Winmo screen and the progress bar.
/edit
I can not execute Task 29 because i can't make a Active Sync connection anymore.
Click to expand...
Click to collapse
omg put youre phone in bootloader, disable connections in active sync on the pc then use task 29, or just use mtty
Demon_man said:
omg put youre phone in bootloader, disable connections in active sync on the pc then use task 29, or just use mtty
Click to expand...
Click to collapse
Sorry, sorry, sorry i forgot bootloader mode. I was to depressed and discomposed.
Thanks for the hint demon_man.
willfriede said:
Sorry, sorry, sorry i forgot bootloader mode. I was to depressed and discomposed.
Thanks for the hint demon_man.
Click to expand...
Click to collapse
lol ..........
Demon_man said:
lol ..........
Click to expand...
Click to collapse
I do not know what have caused your phone get brick, but afak there are some android rom which have not root access. Those roms writes some info directly in your phone memory instead of the storage card. I am currently running the desire v5 which have root access and all the information from Android program or phone tools remains at the SD but not in the phone, so removing the SD is enough for make disappear all Android traces.
I do think that in your case you are using a ROM which writes some information directly in the phone. Just my try.
did you mean decomposed?
My HD2 was running fine on several versions of Android, currently mccm v1 SE with 2.12.50.04 Radio on top of Stock WinMo with SPD whatever thing.
I have a 2GB and an 8gb microSD. the 8gb holds my stable mccm v1 SE and the 2GB is for testing other builds.
I wanted to speed booting to Android, so downloaded chuckydroidROM and Excellor boot loader (v2.1).
I installed the boot loader and it ran fine with my HyperDroid 1.6 build.
But then, after about 3 minutes. The phone reboots to T-Mob welcome screen. It doesn't load WinMo either, unless I reboot manually with the battery or reset button.
I've been looking and looking on the forum and can't find someone with similar circumstances.
I've tried my stable 8gb microSD card with the mccm v1 SE build on it and I get the same thing.
what I've tried:
-"hard" reset (Up/Down volume button reset) = same + lost SPD mobile
-Changed radio to 2.15.50.04 (yeah, no good) = same + no signal
-installed chuckydroidROM = same
- uninstalled EBL = same
- reinstalled EBL = same
- stomped and yelled = same.
Any help? either a thread that I missed in my search or some other things to try?
Thanks guys.
Hmm sounds strange.
But I think you have to start from the beginning.
At first, what version of HSPL do you have installed?
Maybe just try another one, mine is currently 2.08.
Then you should do a task29 before you flash the WM-ROM again.
I recommend also flashing the 2.14 radio.
After finishing these steps prepare your SD. Format it with the formatting tool found here: http://forum.xda-developers.com/showthread.php?t=748961
I would do this 2 or three times.
Then do a fresh install of your android build. Just set up as normal.
If you want to, you could try to restore your data.img. If you do that, it has to be a build from the same developer.
Try and report back.
Cheers
thanks for the reply. I updated to 2.14 and went with a stock 2.2 build (Nexus One). It hasn't crashed since, but I'm afraid to go back to my mccm build. I also am kind of worried that it had something to do with Excellor on the device. Of course I can't resist trying again
I'll try my original build again. I do know that I formatted the SD card well before installing this build, so that might be it. I didn't have the program though, so thanks for the link. Also I didn't look into task29, so I'll read up and find out if that might help.
I am running 2.08 too and was then. I did reflash it though.... but I don't think that was when it started working again.
I didn't know that data files may be portable if from the same dev. that's nice to know. Thanks again for the help, it's a lot easier to work through fixes with the help of a few other brains.
Cheers
- J
Sent the phone in. got it back in five days. Fixed. It must have been heat. I'm running all day now. Thanks for the help.
Sent from my HTC HD2 using XDA App
I've installed magldr1.11&android nand build of mdj gingerbread v.2.6.
Everytime my phone power off with the battery goes out, I will press the power button and plug the cable after the white HTC screen comes out.
By doing that my phone could boot&charge successfully. But after it boots into Android, I always find that some settings changed, such as default browser, screen brightness, etc.
So i'm wondering what cause it: magldr's bug or the build's bug? Is anybody has the same issue with me?
Sent from my HTC HD2 using XDA App
I believe MDJ's Gingerbread v2.6 requires magldr v1.12? try upgrading it and see what happens
V1.11 and 1.12 are the same, save yourself the effort really..
StephanV said:
V1.11 and 1.12 are the same, save yourself the effort really..
Click to expand...
Click to collapse
So it is magldr's problem, isn't it?
Sent from my HTC HD2 using XDA App
It's nothing to do with magldr, which is not running when your phone is running Android. It boots it and nothing else.
It'll be a problem with the build. If you've made any changes to the OS settings, reboot manually so that it's shut down correctly. It should retain them after that. If not, you may want to check the thread where you got the ROM from as you can't be the only person having this problem. If no-one's posted anything then let the dev know about it, otherwise he'll probably be unaware and never look into it.
johncmolyneux said:
It's nothing to do with magldr, which is not running when your phone is running Android. It boots it and nothing else.
It'll be a problem with the build. If you've made any changes to the OS settings, reboot manually so that it's shut down correctly. It should retain them after that. If not, you may want to check the thread where you got the ROM from as you can't be the only person having this problem. If no-one's posted anything then let the dev know about it, otherwise he'll probably be unaware and never look into it.
Click to expand...
Click to collapse
Several days ago, I was using MCCM HD V5.1 build. Once I turned on the phone with the cable plugged, the similar case happened.
That's why I begin to suspect it's the magldr's problem
It seems disappeared after installing magldr1.13
I got myself a HD2 the other day, and since i am a androidfan i wanted to get my HD into a droid rom.
This ended in a mobile not wanting to boot, got to the boot screen where i se the android sign and then it reboots. This goes on forever...
HSPL works (have tried different versions) so i can keep trying different roms, but all ends up rebooting the phone. Doesnt matter if i tryWindows 6.5, android or windows7 roms.
But another problem is that i dont know which Rom was my "original" rom, and i formatted the original sd card...
Hope one of you clebver guys have an answer and solution i can try out.
Here are som info that shows in the boot screen now:
R 2.15.50.14
G 15.42.50.50.11U
D 3.14.04666
How did you exactly try go get yourself 'into a Droid ROM'? From SD card or nand? What bootloader do you have? 2.08.Hspl or 2.08.0000? Just go in to Bootloader and flash a custom WinMo ROM or MAGLDR if you want to flash Android from NAND.
Sent from my HTC Vision using XDA App
I have 2.08Hspl bootloader now.
Have tried with Magldr with no luck. Have tried both Sd and Nand version
Still no luck
LordPalo said:
I have 2.08Hspl bootloader now.
Have tried with Magldr with no luck. Have tried both Sd and Nand version
Still no luck
Click to expand...
Click to collapse
I've tried several ROMs & each time they boot up wonderfully, whenever i encounter a problem..its usually cuz i either skipped a required step or didnt fully understand how to get that particular ROM working...So my advice 2 u is to follow the dev's instructions properly in order 2 minimize errors...feel free 2 try d build contained in my sig...With normal usage, i still squeeze out @least 30hrs+ out of my device(calls, msgs, wifi, data, sync, really low back-light, apps, games, etc)
Aaaahh!
Found the solution to my problem.
It was one of the battery contacts that was bent out.
Bent it back into place, and now the phone boots like a Dream
Let the android testing begin
I only suggested that to somebody else today and All! Haha.
Sent from my HTC Vision using XDA App
If you want NAND version, you need hspl 2.08, magldr, and cwm in order to flash rom.
So I was using WP7 and whenever I turned on any navigation app (including Bing, which accesses location) the device would freeze and reboot.
I thought it was a WP7 issue and reinstalled Android, and to my surprise, as soon as I tried to use a location-based service (Waze in this case) my device froze and rebooted.
So I'm guessing my GPS Antenna is pooched. Any idea how to better diagnose and/or fix this problem?
That's strange, definitely something up with the inner contents of your phone, try flashing a different Android rom and see if the problem persists? It would help if you told us specifically which wp7 and Android roms you flashed.
Regards,
Sent from my NexusHD2 using xda premium
I'm pretty sure it's HW issue because the symptoms are identical to the sound it makes when it freezes.
The WP7 Rom was Pdaimatejam, current Android ROM is IceCreamTosti v0.11 with Dorinmax Kernel.
Mate switch back to WM 6.5 and do a clean install
Before that try a task 29 or changing your radio
If nothing works, well then your radio must be pooched
Reverting to WM 6.5 does solve a few lame problems
P.S. please can I use your sign ? I <3 IT
Nitro_123 said:
Mate switch back to WM 6.5 and do a clean install
Before that try a task 29 or changing your radio
If nothing works, well then your radio must be pooched
Reverting to WM 6.5 does solve a few lame problems
P.S. please can I use your sign ? I <3 IT
Click to expand...
Click to collapse
I'll try it as a last resort, although I DID do a Task29 already.
Thanks for the tip.
You can use my sig, sure
Ah, well. It's my birthday this week and I've been eyeing the HTC One X, what a better opportunity to upgrade
Update: Full Task29 (No Radio) + Installed WM6.5. To make sure, I started Google Maps and checked that it works, it got some satellites and actually worked!! (gave it about 5 minutes to make sure).
Then I Installed CLK over it + Recovery Wipe + Installed Android over it, now testing Waze.
So far so good. I'll have to give it a driving test, but so far looks like it's at least a little better.
Thanks for the tip again!