Sorry if this is in a bad spot, I just see this question ALL the time and I'm gonna make a good How-To in order to just link to it for all the questions that come up! (I'm going to cross-post in G2/DZ Q&A too).
When I started using CM7 nightlies, I loved the ROM, and I understand Cyanogen's reasoning for using an open source, versatile launcher like ADW, but I and many others prefer the look/feel/performance of the stock 2.3 launcher.
Installing the stock 2.3 Gingerbread launcher on CM7!
First off, props to frank707 from the Nexus S forums for this mod link. I suggest you go to the original thread and hit the Thanks button for his work.
You can find the mod here in the Nexus S forum: THREAD.
Download the first file in the thread and place on the root of your SD Card (not in any folder). This file is called "CM7GBStockLauncher.zip" (I've attached to this post for easy access as well).
Disclaimer: You'll lose all your homescreen placements and widgets you have set up with ADW launcher the first time you install this stock launcher.
1) Enter recovery. Hold down the power button in CM7 > Reboot > Recovery > Ok
2) In recovery, select "install zip from sdcard" > "choose zip from sdcard" > select CM7GBStockLauncher.zip > scroll down with track-pad and hit YES.
3) You will see a progress bar and "ADW Launcher is now being uninstalled and replaced with the stock launcher"
4) When its complete select "reboot system now" in recovery, and get back to setting up your homescreens with the stock launcher.
And you're done! Enjoy your stock launcher and 3D app drawer!
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Additional info for people updating CM7 Nightlies:
If you want to flash this over nightlies every day, you need to follow a specific order to not lose your placements again.
1) Flash CM7 nightly via recovery (not ROM manager)
2) After install, stay in recovery (don't boot up into the ROM!), go to Advanced > Reboot recovery
3) After recovery reboots, flash the launcher mod (follow above steps).
4) Reboot system, and you'll be greeted by your original homescreen placements that you had before the CM7 update.
Just in case you're lazy, I've attached the launcher file also.
I use ADW Ex, but this is nice to have vs ADW and EX.
thanks!
Wow I was just thinking about why CM7 doesn't have stock launcher and here I go finding your post. Thanks a lot man, and I'll give props due to the guy that ported it from the nexus s. Thanks a lot, I've been running stock android on my G2 simply because I love everything stock. Now i can jump back on CM7, sweet!
llontop.m said:
Wow I was just thinking about why CM7 doesn't have stock launcher and here I go finding your post. Thanks a lot man, and I'll give props due to the guy that ported it from the nexus s. Thanks a lot, I've been running stock android on my G2 simply because I love everything stock. Now i can jump back on CM7, sweet!
Click to expand...
Click to collapse
Glad I could help.
What are the benefits of stock over ADW, if you will excuse the noob question.
Nonentity018 said:
What are the benefits of stock over ADW, if you will excuse the noob question.
Click to expand...
Click to collapse
Stock generally runs smoother and consumes less power/RAM to run (not a ton, but a little bit). You also get the stock 3D app drawer.
And some people just like the stock look and feel, and don't use the ADW features anyways.
You sir are fantastic!
Sent from my HTC Vision using XDA App
Nospin said:
You sir are fantastic!
Click to expand...
Click to collapse
Aw, shucks. Glad to help.
Sent from my CM7-powered T-Mobile G2
Hi martonikaj,
Thanks for your post, I was just looking for a way to get the stock 3D app drawer on my Desire runningCM7 RC02 (I don't have the Desire Z, but the older one), but I have a problem and I don't know how to resolve it, so I would really appreciate if you could help.
I used Clockwork Recovery to install the zip from sdcard. And everything looked fine has it told me ADW was replaced by the stock launcher. But after my Desire rebooted ADW was still there :'(
So I looked at the logCat and here is what I saw :
E/PackageParser( 158): Package com.android.launcher has no certificates at entry classes.dex; ignoring!
I retried but the exact same thing happened...
I googled this error but didn't find the solution.
I also looked at my "system/app" folder, ADWLauncher.apk disapeared and now I can find Launcher2.apk, but if I click on it, I just get : "app not installed" (not shure for the message as my phone is in french).
So do you have any idea?
You or anybody else of course
cdue said:
Hi martonikaj,
Thanks for your post, I was just looking for a way to get the stock 3D app drawer on my Desire runningCM7 RC02 (I don't have the Desire Z, but the older one), but I have a problem and I don't know how to resolve it, so I would really appreciate if you could help.
I used Clockwork Recovery to install the zip from sdcard. And everything looked fine has it told me ADW was replaced by the stock launcher. But after my Desire rebooted ADW was still there :'(
So I looked at the logCat and here is what I saw :
E/PackageParser( 158): Package com.android.launcher has no certificates at entry classes.dex; ignoring!
I retried but the exact same thing happened...
I googled this error but didn't find the solution.
I also looked at my "system/app" folder, ADWLauncher.apk disapeared and now I can find Launcher2.apk, but if I click on it, I just get : "app not installed" (not shure for the message as my phone is in french).
So do you have any idea?
You or anybody else of course
Click to expand...
Click to collapse
Could be a bad download. Re-download and try again.
Thanks for the zip to install!
Although... not to nitpick, but didn't the stock launcher that came with the G2 have pinch to zoom out? (similar to Launcher Pro) or am I mistaken?
supermario12312 said:
Could be a bad download. Re-download and try again.
Click to expand...
Click to collapse
Lol did you see the date of when he asked? A month a half ago?
THANK YOU FOR THIS!!! Although I like ADW, My friend does not. NOW she is enjoying the customization factor that rooting allows her but still having that familiar feel to her phone. Can't say thanks enough!
Jay
martonikaj said:
Sorry if this is in a bad spot, I just see this question ALL the time and I'm gonna make a good How-To in order to just link to it for all the questions that come up! (I'm going to cross-post in G2/DZ Q&A too).
When I started using CM7 nightlies, I loved the ROM, and I understand Cyanogen's reasoning for using an open source, versatile launcher like ADW, but I and many others prefer the look/feel/performance of the stock 2.3 launcher.
Installing the stock 2.3 Gingerbread launcher on CM7!
First off, props to frank707 from the Nexus S forums for this mod link. I suggest you go to the original thread and hit the Thanks button for his work.
You can find the mod here in the Nexus S forum: THREAD.
Download the first file in the thread and place on the root of your SD Card (not in any folder). This file is called "CM7GBStockLauncher.zip" (I've attached to this post for easy access as well).
Disclaimer: You'll lose all your homescreen placements and widgets you have set up with ADW launcher the first time you install this stock launcher.
1) Enter recovery. Hold down the power button in CM7 > Reboot > Recovery > Ok
2) In recovery, select "install zip from sdcard" > "choose zip from sdcard" > select CM7GBStockLauncher.zip > scroll down with track-pad and hit YES.
3) You will see a progress bar and "ADW Launcher is now being uninstalled and replaced with the stock launcher"
4) When its complete select "reboot system now" in recovery, and get back to setting up your homescreens with the stock launcher.
And you're done! Enjoy your stock launcher and 3D app drawer!
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Additional info for people updating CM7 Nightlies:
If you want to flash this over nightlies every day, you need to follow a specific order to not lose your placements again.
1) Flash CM7 nightly via recovery (not ROM manager)
2) After install, stay in recovery (don't boot up into the ROM!), go to Advanced > Reboot recovery
3) After recovery reboots, flash the launcher mod (follow above steps).
4) Reboot system, and you'll be greeted by your original homescreen placements that you had before the CM7 update.
Just in case you're lazy, I've attached the launcher file also.
Click to expand...
Click to collapse
Not to bump this thread.
But as a question about this, does this launcher allow 7 screens or just 5?
The Unnamed Time Lord said:
Not to bump this thread.
But as a question about this, does this launcher allow 7 screens or just 5?
Click to expand...
Click to collapse
Not sure about this one but i know the true stock 2.3 launcher only allows 5.
And an easier way to do all this would be to google in market stock 2.3 launcher, install it, hit home button and select 2.3 launcher as default. Boom done.
Pretty sure if you use this method with nightlies your gonna have to do it again every single time you install a new one, whereas with my method it will stay through every install.
xsteven77x said:
Not sure about this one but i know the true stock 2.3 launcher only allows 5.
Click to expand...
Click to collapse
Why is that? 2.2 had 7 max why would 2.3 cut it down to 5 max?
Thats odd..
*EDIT* I think I found a modded version of the original GB launcher that supports 7 screens over at the epic 4g area.
Related
I just had my dad do a full root on my evo just for the wireless tether. i really love the options that have opened up and want to pursue them. i want to be able to install boot animation, lock bars, and themes. the problem i am having is i really dont know where to start. ive done alot of research on things but doesnt really tell me exactly what i need to do. i have been told that i need to get a new rom to be able to use custom themes and lockbars and stuff like that. with that i was told i need to do a nanoid backup. so what i am asking from you guys (the expertts with alot of patience for noobies is step be step instructions on what i need to do. i dont even know how to do a nanoid backup. tell me what actions i need to take and what apps i will need to make all this happen. please help me all the other forums tell me is stop being a noob are use the search feature. i just dont think other peoples posts are exact;y what i am asking for so please give me help so i wont be such a noob and have a custom look on my evo.
I'll help you start by flashing a custom recovery which will allow for nandroid backup, data wipes, and flashing custom roms.
1. Download Rom Manager from the Market
2. Open Rom Manager and flash ClockworkMod recovery, which is the first option in Rom Manager. You can use this recovery, which should be installed if your father ran UnRevoked 3.2 to root your EVO.
3. However, I recommend scrolling down to the bottom of Rom Manager and flashing the alternate recovery, Amon Ra. This is the one I prefer to use to flash my roms and whatever else.
4. Grab Quick Boot from the market for easy reboot into recovery or you can just power off then hold vol down + power on to boot into HBOOT. From HBOOT, you can scroll to select recovery, which should put you into Amon Ra.
5. In recovery, you should see Backup/Restore option. Click this and do a nandroid backup. Let it run through until it states completed.
6. Return to main recovery menu, and goto wipe. Select wipe data/factory reset, cache and dalvik cache. You can do each wipe twice just to be on the safe, if you like.
7. Once nandroid and full wipe done, you can select USB-MS to connect your SD card to your PC to load a custom rom onto the root of your card. Once loaded, just disconnect the SD card by hitting power button and return to main recovery menu.
7. If your custom rom is on the SD card root, you should see the rom zip file when you select flash zip from card. Scroll to the rom and select it. Let the rom flash process complete and then reboot the phone.
8. This should take possibly 3-5 minutes to completely load the custom rom onto your phone.
9. Hopefully, everything worked out and the phone boots into the custom rom's homescreen or handsfree setup.
WoW
WoW i dont even know where to begin on telling you how big of a help you was, you answered my post exactly how i needed it answered for me to understand it and be able to do it......thank you soooo much
I do have an additional question to this, what custom rom should I use? Will it have 2.2? And are there tutorials how to install themes? Do I need to have sense to install these themes?
I really appreciate your assistance!!!
Hit up the development forum and check out all the roms. Look at the screenshots and features. When you find one you like, grab it. Check out Fresh 3.3 and Myn's Warm twopointtwo. I've used those both in the past. Those both have Sense and Myn's ROM is already themed (and looks nice in my opinion). Themes are flashed the same way as roms and the descriptions will tell you if they're Sense-compatible.
Remember to make nandroid backups frequently. Find a rom, get it set up to your liking, nandroid, and then get another rom and do it all over again until you decide on one.
Sent from my PC36100 using XDA App
groovdafied said:
I do have an additional question to this, what custom rom should I use? Will it have 2.2? And are there tutorials how to install themes? Do I need to have sense to install these themes?
I really appreciate your assistance!!!
Click to expand...
Click to collapse
choice of rom is up to you, most you'll see will be 2.2 which you'll want for full flash support, to be able to install themes you will NEED and (deodexed) rom. Look for deodexed roms, and there are plenty. A lot of themes will be flashable zips which you install the same way you install a rom (through recovery-install zip from sdcard-choose zip from sdcard).
louforgiveno said:
choice of rom is up to you, most you'll see will be 2.2 which you'll want for full flash support, to be able to install themes you will NEED and (deodexed) rom. Look for deodexed roms, and there are plenty. A lot of themes will be flashable zips which you install the same way you install a rom (through recovery-install zip from sdcard-choose zip from sdcard).
Click to expand...
Click to collapse
TheMagicalSock said:
Hit up the development forum and check out all the roms. Look at the screenshots and features. When you find one you like, grab it. Check out Fresh 3.3 and Myn's Warm twopointtwo. I've used those both in the past. Those both have Sense and Myn's ROM is already themed (and looks nice in my opinion). Themes are flashed the same way as roms and the descriptions will tell you if they're Sense-compatible.
Remember to make nandroid backups frequently. Find a rom, get it set up to your liking, nandroid, and then get another rom and do it all over again until you decide on one.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Thanks you guys! I sorta figured out how to apply themes using the recovery screen after boot up, but it caused the screen to go black HAHA. But anyways, I couldn't find a definitive answer to what I was looking for. I will check out the deodexed roms, thanks!
I one more EXTREMELY important thing about themes, do wipe cache and dalvic twice, but DO NOT WIPE DATA. That is probably why your screen went black. Eithe that or the rom was not de odexed
kernel help
hi i have no idea where to go about this....i just want to download setcpu and apparently a kernel is needed....help?
every rom has a kernel. It's only if your wanting to overclock etc you would want setcpu and maybe different custom kernel
Sent from my PG86100 using Tapatalk
Dark Temptation said:
hi i have no idea where to go about this....i just want to download setcpu and apparently a kernel is needed....help?
Click to expand...
Click to collapse
The kernel and setcpu would all depend on what your trying to do.
Sent from my Creamed out Classic EVO
help as in i didnt understand one thing you just said
Ok what he is sayinis if your wanting set CPU your going to have to flash a custom kernel one that will let you overclock what version of Rom are you on
Sent from my PC36100 using XDA App
i currently have 4.4 on my phone, but was wondering if i can just install 4.5 over it with out wiping anything so i can keep my kernal and all apps and screen layout
Thank you in advance
enigma7820 said:
i currently have 4.4 on my phone, but was wondering if i can just install 4.5 over it with out wiping anything so i can keep my kernal and all apps and screen layout
Thank you in advance
Click to expand...
Click to collapse
you should be able too but you will have to reinstall your kernel but you should have asked this on ROMS thread
I did that and the wireless was not working so i recommend to do a complete wipe so you can make sure you dont have problems trust me on the long run its better.
enigma7820 said:
i currently have 4.4 on my phone, but was wondering if i can just install 4.5 over it with out wiping anything so i can keep my kernal and all apps and screen layout
Thank you in advance
Click to expand...
Click to collapse
You'll save more time by wiping, believe it or not. A lot of little issues may pop up if you don't.
Do this... Make a nandroid of your 4.4 setup, then try flashing over it with 4.5. If you have problems, either go back to your 4.4 nandroid, or wipe and start over with a fresh flash of 4.5.
thank you for the quick responses i had to wipe every and it is working great average of 40mflops
some questions
I am only a few days old to the flashing a ROM to the HTC Evo but I feel I have a pretty good hang of things. I have the following things:
4.5 Mikfroyo (installed last night after finally reading enough to upgrade to the 4.5)
netarchy 4.3.1-cfs-havs-nosbc flashed
the sdreadahead-512.zip installed for faster SD card speeds ( if you want to try it out... http://www.goodandevo.net/2011/02/h...c-evo-even-faster-than-previous-mod.html#more )
but what i am trying to accomplish now is getting the Vanilla lockscreen to work on my phone. I have read that the 4.5 update seems to have the lockscreen within the ROM already, that I just need to delete or rename the htclockscreen.apk within the system/app folder with the Root Explorer app. Here is my issue though: I have changed the Root Explorer to r/w and have located the file from root--->system-->app--->htclockscreen.apk. If I tap on the file it asks me to install/ view/ or cancel. But I thought it was already installed on the system already? If not, do I need to install it, then delete it? That sounds outright silly but then again some stuff is just that way. I have renamed the file and rebooted but, again, to no success. I know that there was a person asking the same question but I guess I could not understand their conversation enough to know how to follow as they did.
Also, just a general question. why is the 4g toggle missing in the notifications bar now? that was kind of handy for me. oh well, i guess i can just use the HTC toggle on a page instead.
Last question, i would like to flash a new theme to the ROM (white version http://forum.xda-developers.com/showthread.php?t=853050) But when I downloaded it, set it to the SD card, went into recovery, flashed it, and rebooted, the HTC splash screen (white screen) just stayed on forever. I had to restore from my backup, thank god I knew to do that before hand, and just kept the stock theme with MikFroyo. what could I be doing wrong?
I also am having a problem with the lock screen but mine is a little different. When i boot up and unlock phone for the fisrt time. I get a forced close error. Other then that everything in 4.5 is working good so far
btf6df said:
but what i am trying to accomplish now is getting the Vanilla lockscreen to work on my phone. I have read that the 4.5 update seems to have the lockscreen within the ROM already, that I just need to delete or rename the htclockscreen.apk within the system/app folder with the Root Explorer app. Here is my issue though: I have changed the Root Explorer to r/w and have located the file from root--->system-->app--->htclockscreen.apk. If I tap on the file it asks me to install/ view/ or cancel. But I thought it was already installed on the system already? If not, do I need to install it, then delete it? That sounds outright silly but then again some stuff is just that way. I have renamed the file and rebooted but, again, to no success. I know that there was a person asking the same question but I guess I could not understand their conversation enough to know how to follow as they did.
Click to expand...
Click to collapse
Long press on the .apk, a menu will pop up, then click rename from there. Just did it yesterday and it worked fine. I just added .bk at the end (htclockscreen.apk.bk)
As for the 4g missing in the pulldown menu, you can learn how to change it here (taken from the mikfroyo thread) http://forum.xda-developers.com/showthread.php?t=877003
thank you Bamba, the lockscreen is now operational and wonderful!!! always have wanted this lockscreen! (Guess it is true, the grass is always greener on the other side.)
as for the missing 4g toggle, i kimd of understand the thread but i will read over it one more time so that i do not mess anything up.
Thanks again!
enigma7820 said:
thank you for the quick responses i had to wipe every and it is working great average of 40mflops
Click to expand...
Click to collapse
What kernel are you using if you dont mind me askin?.. and are you using SetCPU or anything?.. Juice defender type stuff?..
I was just wondering cuz I have 4.5 w/ the stock kernel and only get about 28-29 most of the time... not that it really matters, but it does seem a little sluggish goin from app to app.... thanks
i have since switched to vp 3.0 remastered, and is by far in my experience the best rom i have every used. everything is working good for me so far and since falling in love with LP this is the rom for me. I am using the latest radio and pri 1.77 and sbc-net 4.1.9 no havs and it is amazing, really fast. So far I have been on this rom and kernel for 18 hours sitting at 71%. I am going to make a detailed video and post a link to it here and for youtube.
New to mikfroyo,Had cynaogenmod cm7 on evo with cricket.worked ok.3g did.Friday i had it flashed back to sprint.Put cyanogen back on it.worked great.EXCEPT the 3g would go back to 1x. So put 4.5 mikfroyo. and it works great.So my question is were do you get the updates for mikfroyo? cyanogen released nightly builds.Is there a site or info on updates?Also is there a 2.3 android mikfroyo out?
Check themikmik.com
Sent from my PC36100 using Tapatalk
Hey guys, I just wanted to share my experience so far. I can't post on the MIUI page because I don't have enough posts, so I'll share here for anyone interested.
For anyone wanting to try MIUI for the DX, here's my experience, some tips, and suggestions.
-Beware, installing or trying to install ANY ROM may brick your phone. although it's very rare and unlikely to be unable to find a solution to problems, it can and has happened. so take caution and read instructions and so-forth carefully.
Some history of my DX. I soft-bricked my phone back in the early months of the DX trying to deodex it to install themes. It was stuck on M logo for 2 days before i learned enough from scratch to find out what an SBF was, where to find it, and how to flash my phone back to stock. Ever since then these nice folk on XDA-developers forums and other droid forums have helped me successfully mod my phone many times, through Q&A, detailed instructions, and a little luck.
I've rooted my phone using the command method, Z4Root, and several other processes. Some were hard to figure out, some soft-bricked my phone, most were easy as pie. I'm on a Z4Root atm.
The first successful ROM I installed was GUMMY-JAR. I liked it, it was good to me. nothing like the comprehensive ROMs out now though.
Then I jumped to Liberty 1.5, Liberty x.x etc... Liberty was awesome, but was still basically Froyo with advanced options. I loved it.
Now, just today, I've installed MIUI. And let me tell you, its amazing!
For anyone running Froyo Liberty ROMs, I believe that you can install MIUI right over the top. I didn't think it was going to work, as I hadn't seen anyone mention if it did or not over the top of Liberty 1.5.
If you want to install MIUI, go here. http://forum.xda-developers.com/showthread.php?t=1181486
You MUST be rooted, and be running FROYO, NOT GB! You must also have the Droid X bootstrapper.
I won't give instructions, as I'm not qualified to do so. But I can tell you what I did from Liberty 1.5. MAKE SURE TO MAKE A BACKUP FIRST! 1) I downloaded the MIUI ROM from the above XDA post to my SD card on my phone. 2) I clicked 'bootstrap recovery' on the DX bootstrapper app, then 'reboot recovery.' My phone booted into clockwork recovery mode. 3) wiped data/factory reset. 4) cleared cache. 5) install from SD Card. 6) install MIUI.zip i downloaded from the link i posted above. let it run it's course. rebooted. DONE.
It's really that easy if you are running the DX stock Froyo kernal.
Keep in mind with MIUI, it does NOT auto-sync your Google account. you need to go into the options>>accounts/sync and add your Google account. You can then re-install apps from your backup or just re-download them. Make sure you've synced your contacts with your Google account so they will be there when you add your Google account.
Some thoughts on MIUI...
There is NO STOCK APP DRAWER. I recommend ADW launcher or Launcher PRO. The MIUI launcher inst bad, but it's like iOS in that there's no app drawer. It's just a bunch of screens with all your app icons like an iPhone.
You can download theme's and customize themes through settings>>personal>>theme manager. MIUI allows you to change fonts, boot animation, boot audio, lock-screen style, status bar, icons, launcher, wallpapers, text style, dialer style etc. There's tons of pre-made packages, but you can also change them all individually and create one you like best. You can do all of this directly from the settings menu including looking up new themes, downloading them, and applying them.
MIUI is running on 2.3.4 GB. So it wont say 2.2 anymore after you install. (I believe the kernal is still Froyo though? Please correct me if I am wrong)
I really hope this helps some of you newbies. I am thankful for all of you that have made posts like this that I have found useful in the past.
Note- some people are having issues installing MIUI. They are getting bootlooped on the M logo for some reason. I have no idea why this is, it worked perfectly for me first try. Just remember to follow the instructions on the ROM page, and that you are running the correct version of Android. You shouldn't get a boot-loop if you do so.
Hope this helps!
i have a question.... and this question is what will decide if i keep this or go back to liberty gingerbread....
how the hell do i flash anything.. i can't even install clockwork mod without getting bootloops.... and i'd love to flash certain apps onto this.... but if this can not be done i will have to go back.... the only thing going into recovery does is use the retarded original recovery... and that is a big deal.. if i ruin my phone on the go and need to pullup a backup i can not do this with this rom and i will end up phoneless until i can get to a computer to sbf
nosboost300 said:
i have a question.... and this question is what will decide if i keep this or go back to liberty gingerbread....
how the hell do i flash anything.. i can't even install clockwork mod without getting bootloops.... and i'd love to flash certain apps onto this.... but if this can not be done i will have to go back.... the only thing going into recovery does is use the retarded original recovery... and that is a big deal.. if i ruin my phone on the go and need to pullup a backup i can not do this with this rom and i will end up phoneless until i can get to a computer to sbf
Click to expand...
Click to collapse
What exactly are you asking? "Flashing" is the process of basically overwriting your current Android OS with an Android OS SBF. If you are trying to install MIUI, you cannot do it with Gingerbread installed on your phone. "You MUST be on CyanogenMod 7 or .340 Froyo to flash this rom!" (MIUI)
If you want to install MIUI, i think the best bet would be SBF flashing to stock DX 2.2 .340 FROYO, re-rooting, then using the DX boot-strapper to boot into recovery. Then installing the MIUI .zip from SDcard in the recovery menu. Everything should work fine after that. Rmember you CANNOT go into recovery using DX boot-strapper once this ROM is installed. you CAN go into recovery with this ROM using ROM-manager. This is what I have experienced so far, and what others have said also.
no.. i already have the rom installed... i just want to be able to go into recovery without needing to be booted up.
i'm trying to install some zips through clockwork such as the old blur camera and a few other things... i will install rom manager and see how it goes from there... i love the UI of this rom but as far as being comfortable and stable.. liberty gingerbread has my vote as of now
i've cleared my cache and data several times and i get force closes alot. and this is a clean install coming straight after an SBF.
with liberty gingerbread i had the ability to set it so every phone reboot, even if a battery pull, would boot directly into clockwork mod.. making it easy for me in case i installed a zip that would get me into bootloop
Hmm, sorry mate, I dunno what to tell ya. Try looking aroudn forums or startign a new thread. someone more knowledgable than you or me will help you out.
thanks for everything though!! this really is a beautiful rom and i'd love to stick with it... i'll bite the bullet for the meantime and post around to get some help... i'd love to post in the developer section but i don't have enough posts yet.. haha
nosboost300 said:
no.. i already have the rom installed... i just want to be able to go into recovery without needing to be booted up.
i'm trying to install some zips through clockwork such as the old blur camera and a few other things... i will install rom manager and see how it goes from there... i love the UI of this rom but as far as being comfortable and stable.. liberty gingerbread has my vote as of now
i've cleared my cache and data several times and i get force closes alot. and this is a clean install coming straight after an SBF.
with liberty gingerbread i had the ability to set it so every phone reboot, even if a battery pull, would boot directly into clockwork mod.. making it easy for me in case i installed a zip that would get me into bootloop
Click to expand...
Click to collapse
You need to install Rom Manager, and select flash Clockwork Recovery. Make sure you select Droid X (2nd Init). Then you can reboot into recovery with Rom Manager :-D
laxattack said:
You need to install Rom Manager, and select flash Clockwork Recovery. Make sure you select Droid X (2nd Init). Then you can reboot into recovery with Rom Manager :-D
Click to expand...
Click to collapse
but the problem is that i would like to be able to go into recovery without having to do it through an app... i'd like to make it so every reboot (including battery pull) makes it boot into recovery. thats how i had liberty gingerbread doing it... if not.. i can live with it.. i'll just be a little more careful on what i'm installing
Just wanted to chime in about MIUI rom, I just flashed it yesterday and am ABSOLUTELY loving it thus far. I had no trouble at all installing the rom what-so-ever. I used ROM Manager to do the whole thing: downloaded newest ver. of MIUI, backup current ROM, wipe data and dalvik. Let it run its course and it rebooted and was up and running in no time flat!
Follow Steps at own Risk
MIUI or CM7 Installation:
1.) Depending on what you want to install, download either the I9000 Miui 1.11.11 Rom or the CM 7.1 Stable Rom.
2.) Download the Glitch-V13-DEV-TelusFascinate+ kernel. I chose the Medium Leakage Kernel.
3.) Move both ZIP (ROM and Kernel) files over to the Root of your Internal SD Card (USB, Bluetooth, etc)
4.) Make sure you DISABLE all Lagfixs if you have it enabled.
IMPORTANT:
Froyo 2.2.x (Not Tested):
We need to be able to boot into CWM. Easiest way to do this if you are on Froyo is to Flash the SpeedMod kernel or the Voodoo Kernel. I suggest following all steps which includes installing Darky 9.2 just to be sure. I haven't tried flashing Miui or CM7 from right from the SpeedMod CWM.
Gingerbread 2.3.x (Tested):
If you running a custom ROM that is based off Gingerbread you will be required to flash the Darky Resurrection Edition 9.2 (Froyo) via Odin. This is to insure that the proper boot loaders updated before installing MIUI or CM7. Download the Darky 9.2 package from the above URL, the ONLY files that we need from here are: Odin3 v1.3.exe, darky_odin.tar.md5 & s1_odin_20100512.pit​
Follow Ficeto's Instructions below to flash Darky 9.2 and remember to backup all your stuff before starting.
-------------------------------------
5.) Next step is to get your phone into Download Mode. If you are unsure please search the forums here.
6.) Now, open ODIN and connect the phone to the computer. ODIN will say 'Added'.
7.) Tick the 'Repartition' option, and then select the following files in ODIN (from the folder you extracted the base package in):
[*]PDA: darky_odin.tar.md5
[*]PIT: s1_odin_20100512.pit
8.) Press the Start button and wait for it to finish. Once it finishes, disconnect the phone from the computer after the phone reboots.
9.) After ODIN completes procedure and the phone reboots, a screen will come on the phone with 'Android system recovery <2e>' written at the top, and the following text will be written at the bottom:
"E:Invalid command argument
--Install from package--
Finding update package...
Opening update package...
Installing update...
#MANUAL MODE#
-- Appling Muti CSC...
Installing Muti CSC"
Don't worry about this.
10.) From here the next step is to reboot your phone, your POWER / SELECT button will not work so you will have to pull the battery out. Once you put the battery back in and start up the phone, it should automatically boot into CWM Recovery.
-------------------------------------
11.) Next we want to do a COMPLETE WIPE (Factory), also deleting Partition Cache and the Delvik Cache.
12.) Once the phone has been cleansed, you want to make your way to the option "Select ZIP from SD Card" and select the ROM zip file located on the SD Card. Start the Installation.
NOTE: Once you start the installation, your phone will reboot part way through, then will continue the rest of the installation. The total time for this installation could take up to 10 minutes, so please be patient and do not touch the phone!
13.) DONE!! You have now successfully Flashed either Miui or CM7 on your Fascinate!.
14.) Actually, one more Step which I have ONLY tested with Miui 1.11.11:
Once you have checked a few things out, we are going to want to Flash the Glitch-V13-DEV-TelusFascinate+ kernel. So boot back into CWM Recovery and Flash it the same way you flashed the ROM.
Optional:
BASEBAND UPDATE:
I would also suggest Flashing the I9000UGJK3 Baseband or another of your liking because I had crappy cell signal with the Stock Miui Baseband. Just download it as you normally would, move the ZIP to the internal SD Card, boot into CMW recovery and flash it. Click on the Link Here and find the modem that you would like to flash.
4WAYREBOOT MOD:
I think this Mod is a MUST for anyone running Miui, it completes it!! It basically adds the additional reboot options like Recovery, Hotboot, etc. to the 'reboot' list when going to reboot the phone. Install the ZIP the same way as usual, through CWM recovery. Download the 4-Way Reboot Mod Here.
ENJOY!!!!
I will add to this post with some additional and helpful information.
Other helpful information:
- With Miui or CM7, you will want to install the ROM Manager Application. It contains a bunch of additional downloads and is a must when using Miui or CM7.
- Please do NOT USE 'ROM manager' Backup option to create a nandroid. To create a backup, boot into CWM recovery normally via ROM manager or if you have the 4-Way Reboot mod installed. Just don't use the 'Backup option' in ROM Manager
- I haven't tried Launcher Pro yet, I've actually stuck with the Stock Launcher that Miui comes with, Launcher2.apk
thanks so much! save me tinkering time
Thanks! On my to do!
EDIT - thinking about this on the way into work. Should we include a step (if the complete wipe doesn't do it) to wipe the battery stats? Could be done in CWM after flashing the ROM, or through an app like battery calibration on boot up. Also, we should note on the coming from froyo that you only need speed kernel if you do not have an option to get CWM. When I ran froyo I had a voodoo kernel so could get to CWM that way.
Also, is miui EXT4 out of the box (no need for a lagfix)? Given its next to latest GB I'm assuming it is
Just some thoughts - hoping to do this tonight, but one quick question for the group - flashing - so do you all make sure you have a full battery before you flash? I've not always done that in the past, but believe its a best practice.
NEW EDIT - almost forgot, great work as always Adam!
jpmccarthy said:
Thanks! On my to do!
EDIT - thinking about this on the way into work. Should we include a step (if the complete wipe doesn't do it) to wipe the battery stats? Could be done in CWM after flashing the ROM, or through an app like battery calibration on boot up. Also, we should note on the coming from froyo that you only need speed kernel if you do not have an option to get CWM. When I ran froyo I had a voodoo kernel so could get to CWM that way.
Click to expand...
Click to collapse
Thanks Jeff, the Voodoo kernel should also work as well. In regards to wiping the battery, I never did but it might be a good idea just in case. I haven't run into any issues as of yet. (knock on wood)
jpmccarthy said:
Also, is miui EXT4 out of the box (no need for a lagfix)? Given its next to latest GB I'm assuming it is
Click to expand...
Click to collapse
Not 100% sure on this at the moment, but I do know that there is no need for Lagfix with Miui or CM7.
jpmccarthy said:
Just some thoughts - hoping to do this tonight, but one quick question for the group - flashing - so do you all make sure you have a full battery before you flash? I've not always done that in the past, but believe its a best practice.
Click to expand...
Click to collapse
It definitely is good practice to Flash a new ROM when the battery is almost 100% full. Now saying that, I have flashed ROMS when my battery has been as low as 40% - 45% and never had any issues.
I think that's the best comment Adam - why apply a lagfix if one is not needed!
Cannot wait to give this a run - hoping tonight assuming my little ones all go to bed, and my wife does not get too annoyed with me
[MIUI Themes and Lock Screens]
The Miui Rom is very customizable when it comes to themes and lock screens.
The Miui 'Themes' application allows you to download, install, customize and apply all different types of themes. Which I would have to say that there are at least a good 100 + or more themes out there at the moment.
I think the best feature that the 'Themes' app has to offer is that you have the option to apply different theme components to the current base theme that you have it set to!
As an example, I currently have one of the 'Honeycomb' themes applied as my base theme, my Lockscreen is based off the 'Slide Slip' theme, my Icon Set is based off the 'Seemless Dark Blue' theme and my Dialer is also based off the 'Seemless Dark Blue' theme. It feels like the possibilities are endless now when it comes to customization.
To see the different components the way the themes are broken down, choose 'Edit Theme' from within the 'Themes' app. Within here you can then assign other theme components as long as you with have the full theme installed or just that one component.
Installation of .mtz files, (Full Themes / Theme components)
Once you have downloaded a compatible Miui theme (.mtz format), copy that file to the following directory on your phone:
/sdcard/MIUI/theme
(You can also import themes from the themes application itself, all that does it move it to that directory for you)
Then open up the 'Themes' app and your new theme will be in the list.
NOTE:
If its a theme component only (Still .mtz format) , eg. Lock Screen component, it WILL NOT show up in your main Theme list. Just click on 'Edit Theme' and it should show up under the drop down for 'Lockscreen Style'. Get what i mean?
For Miui Lockscreens, check out the link below!
http://forum.xda-developers.com/showthread.php?t=1288096
For full Miui themes, check out the link below:
http://forum.xda-developers.com/showthread.php?t=1249352
Also, the Theme app has an Online library that you can search through as well
Cheers!
<drool> awesomeness <\drool>
EDIT flashing in process - factory reset at the moment
Awesome! Thanks for creating this. Just gotta wait until the weekend to take the plunge. It's not the flashing taking too long that I worry about, but the time I spend restoring apps and settings and just playing around in general. Not to mention having time to start over if I feel something went wrong. Two more days to go!
guessing it shouldn't boot loop - I'm stuck in a boot loop
looks like it cannot find the SD card - so keep restarting looking for the miui zip - the CWM error is quick before it restarts (can't see it)
EDIT : re-downloaded the zip but same effect. Anyone hit this before with cm7 or miui? trying a few things before I attempt a restore.
I get to 'checking bml' before it reboots, and then it boot loops continuously - I tried flashing and not flashing the glitch kernel first, but nothing sticks.
EDIT : giving up, attempting a restore of my nandroid I made before I started. Any tips let me know - disappointed.
EDIT : still up, backup didn't go so well - likely cause I have odd kernels - one last ditch - went right back to froyo stock, tried speedmod (bootloop), now put on 9.2, rebooting - may give it one more shot before giving up for the night.
EDIT - SON OF A ***** - that did it!!!!!!!!!!!!!!! I might have to provide some troubleshooting tips on that one!!!!!!!!
EDIT AGAIN - knock on wood here - I'm farther than the bootloop and I'm at a MIUI splash screen - that might be as far as I go tonight ... LOL
FINAL EDIT - so not much playing tonight. Ate into that with all this trouble shooting.
SO IF YOU ARE COMING FROM A GB ROM AND GET STUCK IN A BOOTLOOP - I would go to STOCK FROYO and then flash 9.2 and then follow the instructions. Bang on job Adam! I think I just had something odd on my phone.
I'm now up - gltich on + miui.
Wow, sorry you had such a hard time man. Only time I hit a hard bootloop was when trying to install CM7 using gingerbread bootloaders. Did you eventually get it going??
Sent from my Telus T959D
iwebsource said:
Wow, sorry you had such a hard time man. Only time I hit a hard bootloop was when trying to install CM7 using gingerbread bootloaders. Did you eventually get it going??
Sent from my Telus T959D
Click to expand...
Click to collapse
yeah, see my last edits - putting on 9.2 I'm guessing didn't completely adjust the bootloaders - when I put on stock telus 2.1, THEN 9.2 - I was golden.
Didn't play much (that was after 12) but restored a few apps - but man, it is really fast. Will report some thoughts over the weekend likely.
Questions on MIUI
OK a few questions.
- downloaded google maps (navigation, etc). Start it up, but it fails miserably - bombs out and goes into a constant vibration. ANyone having similar issues with that? Suggestions?
- There's a 6 digit number in the left corner of my screen - no meaning to me - anyone know what that is or seeing something similar?
- also, pinch and zoom with the camera. Those don't seem to work - any issues you folks having with that?
- Adam you suggest a different base band - where are you getting zip - I'm only finding large tars on that link (but I"m over tired)
- The OTA updater looks great BUT is in chinese - any one have a work around for that?
Again, sorry about all the issues you had with installing and such. My very first time
jpmccarthy said:
OK a few questions.
- downloaded google maps (navigation, etc). Start it up, but it fails miserably - bombs out and goes into a constant vibration. ANyone having similar issues with that? Suggestions?
Click to expand...
Click to collapse
Weird man, I actually installed google maps a few days ago. First time I used it (Navigation) was yesterday to test out the GPS. Had no problems at all with the apps yet.
jpmccarthy said:
- There's a 6 digit number in the left corner of my screen - no meaning to me - anyone know what that is or seeing something similar?
Click to expand...
Click to collapse
That is your Service Provider. With CM7 and Miui, I noticed it doesn't resolve the provider. Its no harm unless you don't like looking at numbers there. I did find a work around though, just install the Miui Extended Menu Mod and you can change it to what ever you want:
http://forums.miuiandroid.com/showthread.php?7738-MOD-Extended-Settings-Menu-Options
jpmccarthy said:
- also, pinch and zoom with the camera. Those don't seem to work - any issues you folks having with that?
Click to expand...
Click to collapse
Pinch and Zoom? Unsure what you mean, is that just the touch-point focus? If not I haven't tested that yet.
jpmccarthy said:
- Adam you suggest a different base band - where are you getting zip - I'm only finding large tars on that link (but I"m over tired)
Click to expand...
Click to collapse
Guess I better check my links more better. Stupid site.
For now use this one. I know your in the same geo area as me, I haven't had any issues with this one, use the one attached.
Oh, don't use the OTA updater, just use ROM Manager. Or download the Miui updater app from the market.
I'm guessing MIUI originally was developed in China, lol
iwebsource said:
Oh, don't use the OTA updater, just use ROM Manager. Or download the Miui updater app from the market.
I'm guessing MIUI originally was developed in China, lol
Click to expand...
Click to collapse
OK - maybe I should reflash. I actually have ROM Mgr premium - but its telling me I need CWM installed to work (which I obviously have).
And no apologies needed - we're all guinea pigs here
EDIT - Also, on the camera - used to be able to pinch like a website on Darky's to zoom in and out. Maybe that was a custom camera but I think it was generally samsung stock.
EDIT - Reflashed (1.11.18 actually - am I the first ) and GPS issue solved - might have been tied to the modem as I flashed yours Adam (THANK YOU!!!!!!) Keeping moving forward
jpmccarthy said:
OK - maybe I should reflash. I actually have ROM Mgr premium - but its telling me I need CWM installed to work (which I obviously have).
And no apologies needed - we're all guinea pigs here
EDIT - Also, on the camera - used to be able to pinch like a website on Darky's to zoom in and out. Maybe that was a custom camera but I think it was generally samsung stock.
Click to expand...
Click to collapse
Might be the best thing to do. I've read that some people prefer to >> Flash the ROM first >> Flash Kernel >> Boot into Kernel CWM >> Re-Flash ROM again.
Yeah, if you do there is no need for the Darky steps anymore.
Just boot into CWM, do factory wipe, partition and dalvik cache, fix permissions, then flash miui again.
Oh, in regards to ROM Manager and CWM, just select 'Flash ClockWorkMod Recovery' >> Select I9000 (MTA) and choose version 3.
Then reboot into recovery to test.
It actually still uses the Glitch CWM from the Kernel. This is just so that ROM Manager will recognize that you have a selected CWM
Looks like Miui 1.11.18 is now out. I'm going to Flash and test it out shortly.
iwebsource said:
Looks like Miui 1.11.18 is now out. I'm going to Flash and test it out shortly.
Click to expand...
Click to collapse
Already on it - best you for the FIRST time!
jpmccarthy said:
Already on it - best you for the FIRST time!
Click to expand...
Click to collapse
I'm loving Miui and the glitch kernel man. There are a few other Kernels out there that we can try as well. I maybe testing the platypus kernel out soon, it is also built for our phone too
From what I've read so far though, Glitch is one of the best so far.
iwebsource said:
I'm loving Miui and the glitch kernel man. There are a few other Kernels out there that we can try as well. I maybe testing the platypus kernel out soon, it is also built for our phone too
From what I've read so far though, Glitch is one of the best so far.
Click to expand...
Click to collapse
when you get 1.11.18, go to ROM manager and select update ROM - does nothing happen? I have it registered now with a CWM which is fine, it shows my current version (which is latest) so when I click check for udpates nothing happens (no - 'no update available' or anything like that). Just wanted to see if it was working correctly.
Im new to Android world, so please help me.
Now, my Nexus 7 Wifi is now unlocked and rooted by your tutorial, and
flashed Xenon HD Custom Rom.
I was in Jelly Bean 4.2.2 before. And i found some site that says
XenonHD is updated to 4.2.2 version, so i try to get it, and installed it to
my device. But after evrything done, i checked my device's version and it
says 4.2.1, but im sure i downloaded the right one, dated April 2013, as
far as i know. So, my device was downgraded to 4.2.1
Question:
a) Is it just that easy for downgrading an Android device? Because on
iOS, there are lots of concerns first before you can actually do
downgrading..
b) After installing apps, i made a backup with Nexus Root Toolkit, and
after the backup process, it reboots, and i notice that something is
wrong, the X animation logo goes somewhere at the lower right, and
when it goes to lockscreen, since im locked on landscape orientation,
half right side shows first then the half left side, youll really say that, it is
not okay. I tried rebooting by XenonHD settings, i tried to turn off and turn
it on again, same thing happens, what should i do?
c) About XenonHD, is it just one theme available? or i can download more
themes elsewhere? can somebody point me to where can i do that?
d) should i be re-flashing for XenonHD 4.2.2? How would i do that?
e) And what more can i do to my device to achieve it AWESOMENESS
Thanks in advance..
a) Yes, on many android devices it's that easy to downgrade. You don't need to jump through all the hoops like iOS requires you to.
b) Sounds like something may have gone wrong during the install process. Perhaps you could post a picture of what it looks like.
c) not sure, never used it.
d) Guess that's up to you. If it's an upgrade then it could fix the screen issue you're having. You'd flash it the same way you flashed the 4.2.1 version.
I'm sorry for spoonfeeding.
zeneleven said:
a) Is it just that easy for downgrading an Android device? Because on
iOS, there are lots of concerns first before you can actually do
downgrading..
Click to expand...
Click to collapse
Yes. XenonHD says it's 4.2.2 though, so I'm pretty sure you flashed an old build or the dev forgot to edit some text to make it say 4.2.2.
zeneleven said:
b) After installing apps, i made a backup with Nexus Root Toolkit, and
after the backup process, it reboots, and i notice that something is
wrong, the X animation logo goes somewhere at the lower right, and
when it goes to lockscreen, since im locked on landscape orientation,
half right side shows first then the half left side, youll really say that, it is
not okay. I tried rebooting by XenonHD settings, i tried to turn off and turn
it on again, same thing happens, what should i do?
Click to expand...
Click to collapse
Flash a different ROM or reflash your current one. Backups shouldn't have any effect on the ROM; if the backup app you're using negatively impacts your experience, switch it (I use titanium backup). TWRP recovery also supports nandroid backups.
zeneleven said:
c) About XenonHD, is it just one theme available? or i can download more
themes elsewhere? can somebody point me to where can i do that?
Click to expand...
Click to collapse
From the ROM thread, it says it supports CM10.1 themes (theme chooser). Search "CM10 themes" on Google Play to find them, then go to your settings to apply.
zeneleven said:
d) should i be re-flashing for XenonHD 4.2.2? How would i do that?
Click to expand...
Click to collapse
First, download the ROM to your device (if you haven't already), and google apps.
Make a backup of your data (nandroid or Titanium backup or some other backup app).
Then hold the power button, and select either "reboot"/"restart" or "recovery".
If you select "reboot" and no option for "recovery" comes up, hold down the volume down key while the device is restarting, then navigate using the volume buttons once the bootloader pops up, to the "recovery" tab.
Verify that the recovery installed is indeed TWRP (TeamWin recovery). If it isn't stop, and get TWRP before continuing.
Once your recovery pops up, select "factory reset", and swipe.
Then, select "install" from the menu that pops up, navigate to the folder labeled "downloads" and select the ROM file, and then select "add more zips", then select the gapps (google apps) file.
After that, swipe the little bar to start flashing, then after it's finished, select "reboot system".
Once the thing has properly booted into the setup screen, set it up, and restore your data.
zeneleven said:
e) And what more can i do to my device to achieve it AWESOMENESS
Click to expand...
Click to collapse
Install M-Kernel and Trickster Mod (app).
Install Nova launcher.
Install fdroid (for freedoms).
Install MX Player.
Ive already re-flashed with XenonHD's latest update i think, and yeah its on 4.2.2. and still, got the lockscreen problem which i solved by changing the lockscreen orientation, locking it to portrait.. and got more error like "Apollo" and its launcher "has stopped" something.. and the voice dictation, exits when being used, wherever im in..
Now, im planning to switch to Cyanogenmod for 4.2.2, since it has few themes available.
About Kernel? Can someone help me how to do that? a great guide will be greatly appreciated, done searching and cant find it, i swear.
Thank you so much in advance