Xperia X10 Disassembly Video - XPERIA X10 General

I know there is the written guide already, but I'm those type of people that likes to have a video of these type of thing, so I figured I'd make one.
I looked at the written guide and it goes a step further than my video, I pretty much stop when I reach the camera. If you still need the written guide, here you go:
Written Guide by McKebapp: http://forum.xda-developers.com/showpost.php?p=6368979
Without Further ado, Here's the video:
If you need assitance after the LCD, Here's the rest of the process
Again, if any questions arise, please let them be known :]
​

Thanks for doin this for all those that ask too many questions. Lol. I like what your doing here.
Sent from XDA Premium from my X10a rooted running 2.3.2 gingerbread rom from rdannar

Voelker45 said:
Thanks for doin this for all those that ask too many questions. Lol. I like what your doing here.
Sent from XDA Premium from my X10a rooted running 2.3.2 gingerbread rom from rdannar
Click to expand...
Click to collapse
Thanks :] hope it helps!

thanks.
it'll come handy.

Thanks a lot buddy!
Sent from my CL65 AMG using Tapatalk

Nice, thank you. Hoping I won't need to use it

Thanks for all the positive feedback guys :]
Make sticky?

Cool!!!!
Sent from my X10i using XDA App

Hey Guys,
Added another video with further disassembly instruction to the first post. In case anyone needs help taking out the LCD and digitizer.
Hope it helps!
take care

Digitizer
So, I cracked the glass on the housing of my X10 and was taking it apart to see if the LCD was okay. In the process of doing this i got to the fron housing/digitizer and from the guide that I read the digitizer is glued/double sided taped to the fron housing glass...anyway the guide said to heat the glass/digitizer to make removing it easier (so you dont have to buy another one) and while i was peeling it off, I ripped the ribbon cable for the digitizer. Now, I am looking on eBay for a white housing and black digitizer but a few of these auctions have a lens that is black with the white housing which is a little confusing to me now. So is the digitizer clear and on the back of this so called lens or what?
White Housing w/Black Lens
Black Digitizer
White Digitizer
So you think the digitizer is glued to the "lens" and nobody really goes through the trouble to remove them and just resell them as a black/white digitizer or is there a digitizer that you can just buy that would be clear or something that you would glue to the lens...

darkgoth678 said:
Thanks for all the positive feedback guys :]
Make sticky?
Click to expand...
Click to collapse
I agree, make a sticky! Also, you shouldn't make a video with your mailing address on it...now I can stalk you...jk

I it possible for someone to make a USB repair vid? I tried soldering the points but the connection just wouldn't work :/

nice job,man
but i don't wanna break my warranty stamp
it will decrease the cost when i need to sell my x10.

ngocbeo90 said:
nice job,man
but i don't wanna break my warranty stamp
it will decrease the cost when i need to sell my x10.
Click to expand...
Click to collapse
There is a warranty stamp? I dismantled mine at one point and they took it back... the only thing the look for is the water damaged sticker

Z3X said:
There is a warranty stamp? I dismantled mine at one point and they took it back... the only thing the look for is the water damaged sticker
Click to expand...
Click to collapse
yeah there is definitely no warranty stamp, and even if it did, once your warranty is over, it would be much cheaper just to buy the part and fix it yourself rather than pay someone to repair it.

now i can change my scratch screen thnkz

darkgoth678 said:
I know there is the written guide already, but I'm those type of people that likes to have a video of these type of thing, so I figured I'd make one.
I looked at the written guide and it goes a step further than my video, I pretty much stop when I reach the camera. If you still need the written guide, here you go:
Written Guide by McKebapp: http://forum.xda-developers.com/showpost.php?p=6368979
Without Further ado, Here's the video:
If you need assitance after the LCD, Here's the rest of the process
Again, if any questions arise, please let them be known :]
​
Click to expand...
Click to collapse
Thank you very much....life saver!!

Related

How much does it cost to repair a broken screen?

Well the title says it all. I broke the screen of my p3600 and i damaged the case also. Does someone have any idea how much it will cost to repair my p3600?
I know that with laptops, the screen can run up to the same amounth as the laptop... lol... Not sure with ppc's though.
Ebay object number 120124498971 [ GBP 65.99 ] LCD for HTC P3600 P3300, SPV M700 M650, XDA Orbit S300+
Well the thing is i have to replace screen my self. Is there a tutorial on how to disassemble the phone?
Then this thread might be of some help (some instructions can be found), but maybe you can search a little further...
kkelis said:
Well the thing is i have to replace screen my self. Is there a tutorial on how to disassemble the phone?
Click to expand...
Click to collapse
kkelis did you have any joy changing your screen? I've done the same got a crack in the screen almost corner to corner so its knackered, just wondered if you had any success before I get the screwdrivers out.
kkelis said:
Well the thing is i have to replace screen my self. Is there a tutorial on how to disassemble the phone?
Click to expand...
Click to collapse
My friend here is your answer.
Buy what you need, LCD screen and housing from those guys:
http://cnn.cn/shop/htc-p3600-c-277_278.html
Then use my guide on how to disassembe your Trinity. You can find it here:
http://forum.xda-developers.com/showthread.php?t=311463
Best regards!
dimanto said:
My friend here is your answer.
Buy what you need, LCD screen and housing from those guys:
http://cnn.cn/shop/htc-p3600-c-277_278.html
Then use my guide on how to disassembe your Trinity. You can find it here:
http://forum.xda-developers.com/showthread.php?t=311463
Best regards!
Click to expand...
Click to collapse
Thanks you very very very very much!!
I have just broken my Trinity's Screen this weekend. However I don't know if its only the touchpad or if the LCD is also damaged. How can I figure this out??
I think I order the touchpad only first and if not ok will also order the LCD
Thanks a lot and kind regards
great thanks for the link and the info, taken mine apart and its the screen thats gone so ordered it up.
was about to order one from here until your link came through, all being well your guys are about half the cost. thanks again..
http://www.displaydoctor.co.uk/
rdkay said:
Thanks you very very very very much!!
I have just broken my Trinity's Screen this weekend. However I don't know if its only the touchpad or if the LCD is also damaged. How can I figure this out??
I think I order the touchpad only first and if not ok will also order the LCD
Thanks a lot and kind regards
Click to expand...
Click to collapse
Post a photo and I will tell you. But in general if you see black spots on the screen then the LCD is broken. On the other hand the new one is so cheap that I would advice you to buy the whole package and not just the digitizer because it is easier to repair.
Regards.

N1 digitizer replacement

So I bought a digitizer replacement kit on ebay for my N1. (I dropped it and my screen shattered.) I saw the iFixit teardown on the N1 and figured it'd be easy enough to do myself. The kit comes with tools to open it, but no adhesive to mount the new digitizer.(like the iPhone kits)
Basically I was just wondering what I should use to stick the new digitizer back in. Any advice from someone who's already done it would be great too.
Edit: Got the digitizer installed fine, phone booted, I giggled like a schoolgirl aaaand.. Couldn't unlock my phone. It wont respond to touch. Took it apart again to make sure it was connected properly... So now my only assumption is the digitizer I bought was defective.
Any help would be appreciated..
try asking the ebay seller
Thanks, I'll try that. Any other ideas?
maybe ask an electronics repair shop near you
RellikZephyr
Well I got it installed but it wont respond to touch.. Defective part?
I guess you've made sure it's plugged in right? Would definitely double check that
Sent from my Nexus One using the XDA mobile application powered by Tapatalk
TFJ4 said:
I guess you've made sure it's plugged in right? Would definitely double check that
Sent from my Nexus One using the XDA mobile application powered by Tapatalk
Click to expand...
Click to collapse
Yep I did. I contacted the seller on eBay and waiting for a reply. Unless you guys can think of something else I did wrong in the installation I'm sticking with it being defective.
have other people replaced the digitizer successfully on the N1? or perhaps it is some software difference that the new digitizer needs to be "read" by the software, but the OS is looking for the "old" digitizer still...i'm talking out my arse BTW..
RogerPodacter said:
have other people replaced the digitizer successfully on the N1? or perhaps it is some software difference that the new digitizer needs to be "read" by the software, but the OS is looking for the "old" digitizer still...i'm talking out my arse BTW..
Click to expand...
Click to collapse
I've seen a few people posting here saying they've done it, and I know one guy took pictures of the process. I understand what you're saying and it sounds logical enough, but I can't imagine the parts would be any different to cause that sort of problem.. Assuming the part I bought is legit.
Either way the seller should let me return it if the second one they ship out doesn't work.
i replaced my screen and digitizer yesterday using ebay tutorials i found. pm me and ill share but i bet you used the same ones. its a very delicate process. sometimes you have to be tough with it but at the same time not break the little guy. the only problem i could think of would be your connection. the only thing i fudged on minr was not cleaning the lcd before placing it back in. now i have two large fingerprints in my top right under my screen when i dim it.
disdain735 said:
So I bought a digitizer replacement kit on ebay for my N1. (I dropped it and my screen shattered.) I saw the iFixit teardown on the N1 and figured it'd be easy enough to do myself. The kit comes with tools to open it, but no adhesive to mount the new digitizer.(like the iPhone kits)
Basically I was just wondering what I should use to stick the new digitizer back in. Any advice from someone who's already done it would be great too.
Edit: Got the digitizer installed fine, phone booted, I giggled like a schoolgirl aaaand.. Couldn't unlock my phone. It wont respond to touch. Took it apart again to make sure it was connected properly... So now my only assumption is the digitizer I bought was defective.
Click to expand...
Click to collapse
I cast... THREAD NECROMANCY!!!
I believe I have the correct adhesive (3M double-sided sticky tape of some small sort), but I'm wondering if anyone has a better idea on how to get the old sticky gunk off of the LCD aside from using rubbing alcohol? Thoughts? Kthxbai.
EDIT: Also, did you ever get your phone working again?

X10a vs. X10i housing

I have a damaged X10a housing from rogers but I think I'm getting another housing for it. is there a difference between a X10a n a X10i? I'm thinking of getting one off of ebay but I don't know if their real either...
Sent from my X10a using XDA App
To my understanding, there is no physical difference between the X10a and X10i. The only difference is the the network bands they run on.
h**p://dealextreme.com/details.dx/sku.37130
replace * by t
Not at all, I'm positive you can use the housing for it fine. Go for it buddy
Sent from my X10a using XDA App
How hard is it to change housings? Thinking of changing from White to black
Mckebapp did a good job on taking X10 apaort, please refer to the following link with screenshots
http://forum.xda-developers.com/showthread.php?t=668132&highlight=upskirt&page=9
If you are going to buy the housing form dealextreme, do keep in mind that it only come with housing, and it does not come with the Touch screen glass.
The hardest part is to separate your original touch screen glass, becareful when you do that, don't break it.
Also, the color of the touch screen glass will be different if you are thinking of changing the color of the housing.
To OP, what color is your usb port cap? willing to part it out?
Like all SE phones dismantling the phone is easy, but removing the glass digitizer off the fascia can be tricky, and housings advertised at dealextreme are the same as on ebay, and i doubt the replacement housings have any ready adhesive to stick your digitizer back on...
Thanks guys, you have no cluehow helpfull this was, I do appreciate it greatly
Sent from my X10a using XDA App
please search before posting, have a nice day
pluxyplag said:
please search before posting, have a nice day
Click to expand...
Click to collapse
Lol you're a bit late mate.
Sent from my X10i using XDA App
I would be curious to see if it is actual SE OEM housing or a copy. My suggestion is to contact SE and get a price on the actual housing. The copies can sometimes leave a bit to be desired. OR find someone who bought one and see how the colors match up. That can be a good way to find out if they are OEM or no. Back cover has production numbers on it.
Good luck

I effed up, learn from my mistake...

Well, I'll be getting my $100 replacement tomorrow.
I'm usually very handy with electronics, I used to take my Blackberry's apart all the time and blow the dust out.
So I read up on disassembling the EVO and thought "this is gonna be a piece of cake". Well every set of instructions I found said it was SOO easy to take it apart, what they didn't say was they were assuming you have a replacement screen ready to go and that trying to remove the screen from the bezel separated the touch input from the backside of the glass.
Maybe I did it wrong but I broke my precious and almost cried.. a little.
I no longer have any touch input on the bottom half of the screen including the 4 buttons at the bottom. And you can see from the front how it looks like a clear sticker has been pulled apart from the glass. The LCD is fine, just totally jacked up the touch input.
So the purpose of this thread is to warn anyone else who may consider disassembling their EVO to read more than I did.
It may actually be very easy to get the thing apart, getting it back together is another story
Ouch man that sucks
From the fade
Condolences for the dear departed one. A point well taken, thanks!
Although I've "played" with dismantling many electronics during my days, this is one I would not take on. I even opted for the additional cost with BestBuy for their low price replacement for our 2 Evo's.
hmmm........
Aww man so sorry for you lost. That's great you've put up this post as I was just thinking about replacing my evo casing from all the cosmetic damage I've put on it while dropping. Thanks to you my friend this make my decision much easier.
I was going to do the same thing for the same purpose. Thanks for the heads up.
Sent From My HTC Evo 4G Using Tapa Talk Pro!
Part the EVO out so that she may live on in someone else's phone.
BTW that quote is hilarious. I think I remember seeing that around somewhere.
lmao....smh
Couldn't you have just bought a screen on ebay for cheaper?
Sent from my PC36100 using XDA App
Reminds me when I took apart my g1 to change the housing, it was a mess of circuit boards, wires and ribbons.
Can anyone else share their similar experiences? I have a large amount of dust in the upper left in my week old evo, and would would like to clean it out.
Sent from my EVO
Hmmm. you can buy the touch screen for like $50-$60 on ebay unless you are talking about a different part.
http://cgi.ebay.com/NEW-HTC-EVO-4G-TOUCH-SCREEN-LENS-DIGITIZER-REPLACEMENT-/130419345987?pt=PDA_Accessories&hash=item1e5d994a43
malibu_23 said:
lmao....smh
Click to expand...
Click to collapse
..what does "smh" mean?
tinybfk said:
Couldn't you have just bought a screen on ebay for cheaper?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
dwertz said:
Hmmm. you can buy the touch screen for like $50-$60 on ebay unless you are talking about a different part.
http://cgi.ebay.com/NEW-HTC-EVO-4G-TOUCH-SCREEN-LENS-DIGITIZER-REPLACEMENT-/130419345987?pt=PDA_Accessories&hash=item1e5d994a43
Click to expand...
Click to collapse
Damn, I didn't even think of looking. Actually my girl called Sprint and ordered the replacement the next morning without telling me.
It arrived this morning, its a refurb. The bezel is cracked and there's a bright spot on the screen. I called asurion right away, they shipped another already. Im keeping my fingers crossed that the next is in better condition.
Thanks for the link though!
if that was me a piece of me would have died
nebenezer said:
..what does "smh" mean?
Thanks for the link though!
Click to expand...
Click to collapse
http://www.internetslang.com/default.asp?s=smh
phatmanxxl said:
http://www.internetslang.com/default.asp?s=smh
Click to expand...
Click to collapse
lol.. yeah I've done quite a lot of that lately..
thanks for the link
nebenezer said:
lol.. yeah I've done quite a lot of that lately..
thanks for the link
Click to expand...
Click to collapse
No problem, MTFBWY
That sucks alot!!!
I did the same thing, wish I'd have read this post first! I had the dust in the upper left of my screen. I have taken this phone apart before, but not removed the glass. In attempting to remove the glass I messed up the upper right corner of the touch screen (just a small area but still sucks!) and now the tint of some colors is messed up. Also rashed up the plastic on the edges some. Oh and I did get the glass off just enough to spread the friggin dust all around haha. Oh well it's livable until June when I can get a full upgrade (hopefully the EVO 3D!). Let my post here serve as a SECOND warning for those who want to attempt to remove the dust themselves. The glass is glued down and you pretty much have to destroy the phone to remove it. Don't try it!!
dwertz said:
Hmmm. you can buy the touch screen for like $50-$60 on ebay unless you are talking about a different part.
http://cgi.ebay.com/NEW-HTC-EVO-4G-TOUCH-SCREEN-LENS-DIGITIZER-REPLACEMENT-/130419345987?pt=PDA_Accessories&hash=item1e5d994a43
Click to expand...
Click to collapse
I ordered this same part and a new housing because I cracked my digitizer earlier this week. Thanks for the post, OP, because I plan on taking mine apart this weekend to replace it. Wish me luck! lol

[Q] Iconia A500 Parts?

So... I don't really want to go into the details of the thing... long story short my college roommate karate kicked my tablet down a flight of stairs (not even a cracked screen!) Acer support is... meager, at best, and the warranty doesn't cover anything hardware related.
The only part of the tablet that is really broken is the top left corner of it; where the power button resides. It's partially cracked open, and the rear-facing camera is really blurry now, condensation/cracked/not really sure. So my question is, does anyone know where I can buy parts for the tablet? As in... possibly the whole shell and the rear camera? I've looked but maybe just not hard enough.
GermanDoerksen said:
So... I don't really want to go into the details of the thing... long story short my college roommate karate kicked my tablet down a flight of stairs (not even a cracked screen!) Acer support is... meager, at best, and the warranty doesn't cover anything hardware related.
The only part of the tablet that is really broken is the top left corner of it; where the power button resides. It's partially cracked open, and the rear-facing camera is really blurry now, condensation/cracked/not really sure. So my question is, does anyone know where I can buy parts for the tablet? As in... possibly the whole shell and the rear camera? I've looked but maybe just not hard enough.
Click to expand...
Click to collapse
Nice roommate. Shoulda K-Kicked his arse, or steal his girl.
Sent you a pm with a link to the illustrated parts breakdown with part numbers. Also, you might find parts on e-bay.
Moscow Desire said:
Nice roommate. Shoulda K-Kicked his arse, or steal his girl.
Sent you a pm with a link to the illustrated parts breakdown with part numbers. Also, you might find parts on e-bay.
Click to expand...
Click to collapse
Awesome thank you, so far no luck but I'm sure eventually someone will be selling the parts. And yeah I shoulda, but **** happens And yes I asked Acer about spare parts... They seemed incredulous to the thought of an end user prying open their tablet. Something to the extent of "voids warranty" and "pay us money to replace the $10 part." Gah. Uh well, now I'm content with building my own green UI now.
Moscow Desire said:
Nice roommate. Shoulda K-Kicked his arse, or steal his girl.
Sent you a pm with a link to the illustrated parts breakdown with part numbers. Also, you might find parts on e-bay.
Click to expand...
Click to collapse
Hi! I have had almost exactly the same "accident". My 1 year daughter is responsible for that...
I'd really appreciate that link.
Thank you!!
noches_rose said:
Hi! I have had almost exactly the same "accident". My 1 year daughter is responsible for that...
I'd really appreciate that link.
Thank you!!
Click to expand...
Click to collapse
Haha, yeah bad things happen
http://forum.xda-developers.com/showpost.php?p=15326127&postcount=8
There's the link, sorry it's taken so long. It only has the part numbers, and as far as finding a vendor for those parts, it's almost impossible. Plenty of front cameras on e-bay, but no rear cameras that I've found. Let me know if you have any luck.

Categories

Resources