Database Users

[Q] is there anyone who can help?

hey all !!!
I own a HTC HD2 i had custom Rom in it and tried to go back to original Rom (official Rom) everything went ok from my loptop but my cell phone couldn't restart itself, and there is no power what so ever, even if i put it on charge or connect it on pc, it can't read it. so is there anyone out there that can help me out with it? i have done the following thing
1. i took out the battery for like an hour and plugged it to wall charger no result.
2. i hold down the shut down button and volume up button still no result.
3. i put it on charge for few hours i thought it might help it to bot up but it didn't.
can u guys plz help me out with it? thanks in advance

What type of HD2 do you have and what "official ROM" did you try to put back on it?

hey thanks for ur reply i have Htc hd2 t-mobile and it used to run with htc sense, then i installed Ex-CHT ROM - 6.5.5 base and changed the radio as well, then i decide to go back to official Rom and i downloaded Official WM6.5 ROM - HTC HD2 (Leo) - English Version. after running this it shut down my phone and now i cant turn it back on, and thanks once again

Can you get back into bootloader screen. Hold down vol down and power on.

If you can do that then your fine. Just reflash it. Make sure you turn off all your anti virus programs. If you can't get to the bootloader screen than you have a bricked phone my friend.

mattfmartin said:
Can you get back into bootloader screen. Hold down vol down and power on.
Click to expand...
Click to collapse
i have tried it but no luck...
mattfmartin said:
If you can do that then your fine. Just reflash it. Make sure you turn off all your anti virus programs. If you can't get to the bootloader screen than you have a bricked phone my friend.
Click to expand...
Click to collapse
did all of them but unfortunately its still not turning on, anyways thank you

its dead. tmous (t mo US) phones cannot take any official roms other than the specific tmous roms.
the radio included in the rom you flashed has killed it.
(You didnt paste the whole filename of the rom you flashed, so i can't be absolutely sure, but im betting if you look at the radio version code towards the end it is 2.xx.51.x)

samsamuel said:
its dead. tmous (t mo US) phones cannot take any official roms other than the specific tmous roms.
the radio included in the rom you flashed has killed it.
(You didnt paste the whole filename of the rom you flashed, so i can't be absolutely sure, but im betting if you look at the radio version code towards the end it is 2.xx.51.x)
Click to expand...
Click to collapse
Indeed, what he says. You MUST flash a T-Mobile HD2 with either a safe custom ROM or the official T-Mobile !US! carrier ROM. Flashing ANY other official ROM is a one way, non stop ticket to Bricksville.

Help Please

Hi everyone in a panic but am trying to stay calm lol...
So i think i have over tinkered and broken my phone....
I am able to get to the boot loader by powering on and holding down the volume button and it will allow me to flash radio and rom to it but it never boots after just hangs and says loading please wait..
I have tried roms
chuckyrom 23148 tabtasitc
OzDroid 2.00
and radio's
2-11-50-26
2-11-50-26
and the same thing with these in any combo
I have ran task 29.. and have to admit i am left a bit worried now... any advice would be great i am going to read the rom section and try and get a new rom and radio combo...
Any Ideas ...

Okay phone seems to be flashing... but task 29 is not seeming to wipe my phone correctly it is still left with the chucky room splash screen after a task 29 i thought this should go white

First thing, your phone is fine - since you can get into bootloader mode.
What version of the HD2 do you have - is it the T-Mobile USA version?
Have you installed HSPL on your phone?
Go to the HTC website for your location and download the ROM for your phone (if your phone is unbranded then download the HTC ROM or if it is branded then download the mobile operator's branded version of the ROM). NOTE: If you are using a TMOUS phone, then double make sure that you are downloading the USA version of the T-Mobile ROM.
Bootup your phone into Bootloader Mode, then connect to your computer via the USB cable. Run the downloaded ROM. Ignore the connected via activesync in the warnings.

Hi i have a O2 uk hd 2 i thought the phone was okay as the laod was coming up and it seems to be writing to it... hm strange it just says loading but the red writing does not appear on the bottom left to say rom and radio version...

Hi have downloaded and flashed the o2 rom from the HTC website it seems to have gone okay BUT now when it boots it is just stuck on the O2 splash screen and goes no further..
I have now removed this from usb and re inserted the sim card and am getting this at the bottom
R 2.07.51.22...2 (Is this the radio?? or the Rom)
g15.32.50.07u
d 1.72.82124
and it has come up slowly and seemed to be loading windows mobile.. and then crashes and starts all over again...

Okay so I have now got a stock o2 rom from htc on my phone. and it is working.
Thank you Fred_up for the advice... should i now be able to start again trying to load a custom rom back on to the device to enable me to use android again?

Try doing a hard reset. While phone is Off, hold Volume up & Volume down buttons, then tap the Power button.
In Bootloader Mode, what does it say?

pull off battery and wait 5 minutes. let the phone cool and the insert back the battery.
it should be alright. however everytime your phone overheating its freeze again..
any solution to that let me know.

cool off your phone. take out the baterry and then once the phone is cool insert the battery and it will boot again.
now hd2 have this problem. overheating. the phone will freeze. hd2 now need freezer to make it not freeze.

About to destroy my HD2 (Need help)

This phone has been giving me hell for a really long time.
In short; it don't work. It will flash but will never boot right.
When I got my HD2 it had the stock WinMo 6.5.3 ROM that worked perfectly. I played with booting Android off my flash drive but got the fast audio problem. So I flashed ChuckyDroidROM, and used that for a month with some different Android builds, all worked fairly well.
But then one day, it started crashing after a while of use. Sometimes it would just not let me unlock it, and other times it completely crashes and restarts. Every time it happened earlier and earlier after booting.
So I tried Task29 and putting the stock ROM back on it, no go. It crashes right after it boots.
Now I've flashed HSPL 2.08.HSPL, Radio 2.15.50.14, and MAGLDR 1.12. I'm trying to flash WP7 to it, but since the MAGLDR menu doesn't show up, I can't flash anything.
It boots into MAGLDR, but just shows "aMAGLDR V1.12, Build: 12 2011 XX:XX:XX, by Cotulla 2011" but nothing else. The menu doesn't show up, but it did once....
Any ideas? I'm desperate. I'm about to blow it up....
EDIT: Now it won't even f**king turn on!!!! And yes the battery is FULL

I'm having an issue with my HD2 also (even though I've flashed it successfully several times) so this sounds like a very, very isolated issue. The problem I'm having - disabled phone functions in WP7 - also appears to be an isolated issue. Sometimes these things can be the result of a bad flash. Give this thread a week. You're in the right place.

AutoItKing said:
This phone has been giving me hell for a really long time.
In short; it don't work. It will flash but will never boot right.
When I got my HD2 it had the stock WinMo 6.5.3 ROM that worked perfectly. I played with booting Android off my flash drive but got the fast audio problem. So I flashed ChuckyDroidROM, and used that for a month with some different Android builds, all worked fairly well.
But then one day, it started crashing after a while of use. Sometimes it would just not let me unlock it, and other times it completely crashes and restarts. Every time it happened earlier and earlier after booting.
So I tried Task29 and putting the stock ROM back on it, no go. It crashes right after it boots.
Now I've flashed HSPL 2.08.HSPL, Radio 2.15.50.14, and MAGLDR 1.12. I'm trying to flash WP7 to it, but since the MAGLDR menu doesn't show up, I can't flash anything.
It boots into MAGLDR, but just shows "aMAGLDR V1.12, Build: 12 2011 XX:XX:XX, by Cotulla 2011" but nothing else. The menu doesn't show up, but it did once....
Any ideas? I'm desperate. I'm about to blow it up....
EDIT: Now it won't even f**king turn on!!!! And yes the battery is FULL
Click to expand...
Click to collapse
When your rebooting and the splash screen shows up are you holding down the power button to gain access to magldr options?
Sent from my HTC HD2 using XDA App

Did you took out your SD card? If no, take it out, try turn it on. If you can reach the boot (means the multicolors menu) than your good to flash.
I have the feeling that might be because of damaged SD card (similar issue I had). Hope that helps.
Good luck!

jvillejoe said:
When your rebooting and the splash screen shows up are you holding down the power button to gain access to magldr options?
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Yes I am. It showed up today, and I was able to flash WP7 to the device, but now it will not boot into WP. It freezes at MAGLDR, no options.
sebacu said:
Did you took out your SD card? If no, take it out, try turn it on. If you can reach the boot (means the multicolors menu) than your good to flash.
I have the feeling that might be because of damaged SD card (similar issue I had). Hope that helps.
Good luck!
Click to expand...
Click to collapse
I can flash anything I want, it just never boots, or it boots and then crashes immediately. I have tried with and without my SD card/SIM card.

Wow it seems as if your doing every thing right. My suggestion is, Re-flash the stock Rom that came with the phone, Revert back to the original radio and spl. Call your sevice provider for a replacment phone as it sounds like its defective. Thats what i would do.

AutoItKing said:
Yes I am. It showed up today, and I was able to flash WP7 to the device, but now it will not boot into WP. It freezes at MAGLDR, no options.
I can flash anything I want, it just never boots, or it boots and then crashes immediately. I have tried with and without my SD card/SIM card.
Click to expand...
Click to collapse
Go into Bootloader Flash a Stock Rom.
Then Update the Radio
Format SD -.- but backup your Data
and try to reflash MAGLDR
After that try to reflash Wp7 it should work

New developement:
It won't turn on, period. Nothing.
The power button does nothing, the reset button does nothing, nothing works.
The battery is at 4.1V, it's rated at 3.7V, would that cause the phone to not turn on?

Maybe a hardware failure.
Any warranty?

This happens when the phone over heats dont turn it for a while and dont have it conect it to the computer or anything when u try turn it on.

berbecverde said:
Maybe a hardware failure.
Any warranty?
Click to expand...
Click to collapse
Nope.
eddym123 said:
This happens when the phone over heats dont turn it for a while and dont have it conect it to the computer or anything when u try turn it on.
Click to expand...
Click to collapse
I've tried many times over the last couple of hours. It has not turned on at all, no matter what I do.

AutoItKing said:
Nope.
I've tried many times over the last couple of hours. It has not turned on at all, no matter what I do.
Click to expand...
Click to collapse
ok this happened to me before take it out and leave it out of the phone for a while.
I even got to think my phone was mess up also one time it wasnt working and I change the battery I had for the one of my girlfriend to turn it back on dont know if that helps.

[Q] HD2, Flash type5510BCAD, Power Reason 6, BOOTUP_W_WARM_RESET

I need help if anyone knows.
friend somehow managed to screw up your hd2. Artemis is injected into a rom, I think it was based on 3.14. HSPL previously done, it seems that something is not coincidence and not the phone can not start. that turns the gray screen that says
Flash type5510BCAD
Power Reason 6
BOOTUP_W_WARM_RESET
After a few seconds starts to rise wm that appears yellow screen on which writes the windows and knocks.
I tried different ROMs oficial and cooked, the PCIJ and the SD, Task 29 and nothing fails. go per cent during the installation and just get out of it. SD will not even try.
If someone has an idea
thanks

Its hard to fully understand whats happening with the phone from your descriptiond
Try removing the sd card, task 29 then a stock rom from.
As the phone boots, I don't think its a major issue

johnerz said:
Its hard to fully understand whats happening with the phone from your descriptiond
Try removing the sd card, task 29 then a stock rom from.
As the phone boots, I don't think its a major issue
Click to expand...
Click to collapse
I am with member jobnerz on this one. It is a little hard to fully understand your issue here but I think I know what you are saying. As mentioned above put your HD2 into bootloaded by turning the Pbone off and holding the volume down button and briefly pressing the power button but keep the volume down button pressed until you see the bootloader appear.Connect you HD2 to the computer via USB cable and wait until you see the serial in the bottom white bar on your phone screen change to USB. When you see USB run a task 29. Then cut the obone off and put it back into bootloader and wait for the USB at the bottom again then flash the ROM you want.

n__mil said:
I need help if anyone knows.
friend somehow managed to screw up your hd2. Artemis is injected into a rom, I think it was based on 3.14. HSPL previously done, it seems that something is not coincidence and not the phone can not start. that turns the gray screen that says
Flash type5510BCAD
Power Reason 6
BOOTUP_W_WARM_RESET
After a few seconds starts to rise wm that appears yellow screen on which writes the windows and knocks.
I tried different ROMs oficial and cooked, the PCIJ and the SD, Task 29 and nothing fails. go per cent during the installation and just get out of it. SD will not even try.
If someone has an idea
thanks
Click to expand...
Click to collapse
I'm sorry,but it maybe physical problem. It seems like it out of memory ic's, because after flash device goes to same status "Flash type5510BCAD...." Try to flash several times also using sd card, maybe this will help

[Q] HD2 touchscreen not responding aftef screen lock

Hi,
i`ve got a problem with my touchscreen, after installing SD card distribution of Android, few restarts later my touchscreen stpped to respond every time when my device is locked, and i have to restart it.
I tried to flash new rom - nothing happend
H-E-L-P !

remove sd card delete the partitions and format - use Easeus free edition for this
Then boot the phone - reun task 29 from your pc then reread the flashing instructions for the rom of your choice and try again - ensure the rom supports your version og HD2 whatever that may be

All done, and doesn`t work. I`m wonderig if is possible, that is malfunction of touchscreen, because it have been changed after it was broken.

i'm having the same issue. after it goes into its first lock screen the touch screen input doesn't work. i've flashed the ROM and also task29 the sucker. i've reverted back to stock ROM too. I'm not running android or even try to install from SD.

Bump..!
Anybody got a solution for this..?
I have a HD2 with android on it.. nand version.. so it runs without sd card..
The phone works fine.. but when you lock it.. the screen doesnt respond anymore.. its running miui at the moment, so i can unlock the lockscreen.. but still the screen doesnt respond..
i see more people having this issues, so i hope to find a solution..
keep on searching..!

So Am I
after 5 moths of Android Nand use I have the same problem. I have changed kernel/ROM
I made few times task29 wipe cache/dalvik but still the same
Yesterday I try install the orginal WWE 6.5 ROM but nothing change...
Maybe is hardware issue ? Few times with android rom my leo was very hot and maybe something burn inside ? or its stupid idea but who knows

gomez.pl said:
So Am I
after 5 moths of Android Nand use I have the same problem. I have changed kernel/ROM
I made few times task29 wipe cache/dalvik but still the same
Yesterday I try install the orginal WWE 6.5 ROM but nothing change...
Maybe is hardware issue ? Few times with android rom my leo was very hot and maybe something burn inside ? or its stupid idea but who knows
Click to expand...
Click to collapse
Sure it's hardware: replacing touchscreen is your best choice!

But is this because of android on hd2? or do other people with stock phones also see this problem?
Hd2 is already gone here.. but i think its a good thing to know for the scene..

thommy86 said:
But is this because of android on hd2? or do other people with stock phones also see this problem?
Hd2 is already gone here.. but i think its a good thing to know for the scene..
Click to expand...
Click to collapse
It's a wellknown (hardware) problem for HD2, not related to software(android/wm/wp/whatever).

SO my LEO came back from service, there is a part list that they changed:
- 54h20178-00M pre-assy key, key FPC, UF-KS, w/o Reg
- 74H01549-00M Chassis Pre-assy, black, stainless steel, MLRB81
- 76H04078-00M tape, FPC connector, kapton, MLRB81
- 83H00294-01 change 83H00233-01, 83H00294-03, 62H00065-B1M Sub-assy to 82H
maybe You need do the same...

Okay, so i just bought my 6th HD2, and this one got the lockscreen problem as well. If i lock the screen using the red power button and try to wake it up with the same red power button i found out that it doesn't work. I tried everything but i think i found a sort of workaround for the touchscreen problem.
1. Lock the screen as you normally do, with the red power button.
2. Wait at least more then 6 seconds with the screen off.
3. Now push the VOLUME UP button to make the device wake up.
4. Profit!
5. If it doesn't work, go back to 1 and try again.
I found out that if it works 1 time it will work multiple times in a row.
I'm on NAND but i think it works on SD aswell.
Please post your reactions to this.