Related
phone was working fine up until yesterday it frooze up then resarted and magldr went go go go then fatal hit 1 after that. Tried restarting it but notthing seemed to help. I tried to reflash a winmo rom but that kept hanging at the htc screen tried task 29 reflashing custom and stock winmo roms but nothing seems to work phone still goes to the bootloader and still hspl anyone have any idea how to fix this i am stumped??
MAZDROID said:
phone was working fine up until yesterday it frooze up then resarted and magldr went go go go then fatal hit 1 after that. Tried restarting it but notthing seemed to help. I tried to reflash a winmo rom but that kept hanging at the htc screen tried task 29 reflashing custom and stock winmo roms but nothing seems to work phone still goes to the bootloader and still hspl anyone have any idea how to fix this i am stumped??
Click to expand...
Click to collapse
i got this a couple times made me freak out too
all i did is removed the battery and it worked afterwards
did u try flashing a new nand android?
Yea i did but i still kept getting the same error should i try a different nand rom?
and after i reinstall a new nand rom its gets the the "reset now!" and just sits there
MAZDROID said:
and after i reinstall a new nand rom its gets the the "reset now!" and just sits there
Click to expand...
Click to collapse
Try going to bootloader - hold vol. down and press and release the power button
Then try flashing radio, hspl.2.08 and then magldr 1.11
This might help
heck i tried reflashing the radio and the hspl and the magldr all of its goes fine until when i try to install a nand rom once i do that i gets all the way to the "reset now!" and just stays there at this point i just want to get a stock winmo rom back on so i can atleast make calls this phone is my only form of communication
MAZDROID said:
heck i tried reflashing the radio and the hspl and the magldr all of its goes fine until when i try to install a nand rom once i do that i gets all the way to the "reset now!" and just stays there at this point i just want to get a stock winmo rom back on so i can atleast make calls this phone is my only form of communication
Click to expand...
Click to collapse
What is your HSPL version ? Its written on the tricoloured screen of the bootloader ? Your phone was unlocked before you tried to flash a NAND ROM ?
Try and use a task29 tool provided here http://forum.xda-developers.com/showpost.php?p=5848003&postcount=19 . Extract it and run it properly ( with phone in bootloader mode ) and perform the task 29. Then flash a radio version which you can find it here http://forum.xda-developers.com/showthread.php?t=611787 . ( I suggest 2.14.50.02 )
My suggestion is to go to bootloader-tricoloured screen ( NOT Magldr ). Flash a good radio version and afterwards go back to tricoloured screen of the bootloader in order to flash a Windows Mobile ROM ( preferably a STOCK one ). Forget about NAND ROMs until you will be sure what your problem is.
PS : Very very important read for 2-3 hours ( to understand well ) what says here http://forum.xda-developers.com/showthread.php?t=609477
viperd said:
What is your HSPL version ? Its written on the tricoloured screen of the bootloader ? Your phone was unlocked before you tried to flash a NAND ROM ?
Try and use a task29 tool provided here http://forum.xda-developers.com/showpost.php?p=5848003&postcount=19 . Extract it and run it properly ( with phone in bootloader mode ) and perform the task 29. Then flash a radio version which you can find it here http://forum.xda-developers.com/showthread.php?t=611787 . ( I suggest 2.14.50.02 )
My suggestion is to go to bootloader-tricoloured screen ( NOT Magldr ). Flash a good radio version and afterwards go back to tricoloured screen of the bootloader in order to flash a Windows Mobile ROM ( preferably a STOCK one ). Forget about NAND ROMs until you will be sure what your problem is.
PS : Very very important read for 2-3 hours ( to understand well ) what says here http://forum.xda-developers.com/showthread.php?t=609477
Click to expand...
Click to collapse
thanks man i followed your instructions and i am now back into winmo thanks a million times
MAZDROID said:
thanks man i followed your instructions and i am now back into winmo thanks a million times
Click to expand...
Click to collapse
I am having the same problem.
@ MAZDROID: Can you tell me the steps you did to recover your phone?
Thanks a lot.
Are you using the stock usb cable that came with the phone or some generic one?
There seems to be slight corruption while you are flashing the ROM.
Try using memtest86+ and test your computer's RAM.
LiFE1688 said:
Are you using the stock usb cable that came with the phone or some generic one?
There seems to be slight corruption while you are flashing the ROM.
Try using memtest86+ and test your computer's RAM.
Click to expand...
Click to collapse
Thanks for reply. I did not use the stock usb cable, but it was the same with the factory usb cable.
I got this problem when tried to install WP7, then got "fatal hit 1 error" when booting WP7 for the 1st time.
Now my phone is bricked with T-mobile logo. Tried to HSPL, fash radio, flash OS (with the stock one) by task 29 many times, but it did not work. All flash process are okie, but My phone is still bricked
Any way to bring the phone to factory settings? Need help for an advise. Thanks a lot
Is your's one of those 1024MB ROM T-Mobile HD2s?
I am not sure if the the SD leoimg.nbh recovery method works. It flashes the SPL back to Original, including Firmware, and RADIO.
If your HD2 only has 512MB ROM, then just download the Official HTC HD2 ROM from HTC's support site (If it is UK, then select UK, if it is USA, you are kinda S.O.L.)
Extract the RUU(something).exe file using WinZIP or WinRAR or 7-ZIP.
There will be a RUU_signed.nbh file, rename that to leoimg.nbh and put that in the ROOT folder of your FAT16/FAT32 MicroSD Card.
While holding the Volume Down button, power up the device.
It should detect the LEOIMG.nbh file and flash everything back to default.
*WARNING*
Make sure your HD2 has 512MB ROM, NOT 1024MB ROM
Make sure your MicroSD Card is formatted in FAT32 or FAT16
Make sure the the Official RUU ROM is v1.xx and NOT v3.xx
Good Luck!
BTW: The Stock Cable seems to have a DIODE soldered to it. Regular cable is fine, but it doesn't protect it from current back flow during charging.
I started with a task29 then flashed a new radio and then I reloaded a stock rom via usb since i couldn't get it to work via sd card. I was able to get the phone to start but i still am running into problems when flashing in general with the phone on multiple computers so part of the problem was solved but every now and again it just shuts of and i have to reflash
LiFE1688 said:
Is your's one of those 1024MB ROM T-Mobile HD2s?
I am not sure if the the SD leoimg.nbh recovery method works. It flashes the SPL back to Original, including Firmware, and RADIO.
If your HD2 only has 512MB ROM, then just download the Official HTC HD2 ROM from HTC's support site (If it is UK, then select UK, if it is USA, you are kinda S.O.L.)
Extract the RUU(something).exe file using WinZIP or WinRAR or 7-ZIP.
There will be a RUU_signed.nbh file, rename that to leoimg.nbh and put that in the ROOT folder of your FAT16/FAT32 MicroSD Card.
While holding the Volume Down button, power up the device.
It should detect the LEOIMG.nbh file and flash everything back to default.
*WARNING*
Make sure your HD2 has 512MB ROM, NOT 1024MB ROM
Make sure your MicroSD Card is formatted in FAT32 or FAT16
Make sure the the Official RUU ROM is v1.xx and NOT v3.xx
Good Luck!
BTW: The Stock Cable seems to have a DIODE soldered to it. Regular cable is fine, but it doesn't protect it from current back flow during charging.
Click to expand...
Click to collapse
Thanks, but mine is 1024MB ROM T-Mobile HD2s. Now whatever I flash the phone, it is still bricking, so i think it would work if I removed HSPL and bring it to the default factory.
Any idea to do this?
MAZDROID said:
I started with a task29 then flashed a new radio and then I reloaded a stock rom via usb since i couldn't get it to work via sd card. I was able to get the phone to start but i still am running into problems when flashing in general with the phone on multiple computers so part of the problem was solved but every now and again it just shuts of and i have to reflash
Click to expand...
Click to collapse
I did task 29, then updated radio 2.14 for T-MOUS, but tri-color boot loader sill comes with HSPL 2.08 which means radio was still 2.08? Then I updated factory ROM ship (OS 3.4 and radio 2.14). I can not find a Rom with only OS (not including radio)
Did you get the change of radio to 2.14 in boot loader? Where to download a factory ROM with OS for T-MOUS?
Thanks
Well, this is the thing, T-MOUS controls the ROM releases. The deal they have with HTC refrains HTC from releasing or hosting any of the ROMs. So they should be hosted on T-mobile US website.
Anyways, from what I know, there are only 3 releases so far for US T-Mobile HD2
2.10.531.1
2.13.531.1
3.14.531.1 <--- DO NOT GET THIS ONE (Contains SPL 3.03 cannot be flashed to HSPL 2.08)
After you do a RECOVERY using the bootloader, you will have to reflash the radio to one that is compatible with Android, after that you reflash the radio to one that can be used by Android. Then you install MAGDLR.
I vaguely remember rumors that using a T-mobile will lock the phone to only T-mobile. If you have an sim unlocked T-Mobile, you might lock it again.
Please do so in that order.
BTW: If your phone still can get to the BootLoader (TRI COLOR SCREEN), it is not bricked, it is just not behaving. Bricked means you can't even turn it on for some people.
OMG, they are... LOL!
http://www.t-mobile.com/wmupgrade/
My phone just reborned now. Thought it was totally die when stucking with "stick together" logo. Here are the steps I did.
1) Redo exactly step by step in this post (focus on steps: HSPL, campatible ROM, hard-reset, remove/reinstall memory card + Sim)
http://forum.xda-developers.com/showthread.php?t=609477
2) Try with different SIM CARDS for your phone. I tried 5-6 ATT cards, and only 1 works and helps to go through stick together logo. If you see these words R G B at the bottom, then you phone revives.
SO happy now! Thanks all for your previous posts
No luck
I've tried everything but nothing.
I Get the "Fatal hit 1" when I'm trying to enter AD Recovery.
I'm not able to boot it with WM stock - it just get stucked att the first HTC screen.
Anyone has an idea on how to solve this?
I've have made a few steps several times but still nothing, starting to get frustrated.
Try to flash a different size partition of cwm, see if that will get you in clock work recovery...
Sent from my HTC HD2 using XDA App
kompheak said:
Try to flash a different size partition of cwm, see if that will get you in clock work recovery...
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Thank you so so much! It worked!
This is how I did for you other guys how's experience the same issue.
I did all this with the HD2 Toolkit.
1. Wipe Task 29
2. Install HSPL 2.08 HSPL (Don't now if this is needed but did it anyway)
3. Install MAGLDR
4. MAGLDR Reperation with Partition 200MB Cache 8MB
Now I was able to enter AD Recovery and install zip from SD card.
Android is loading at the moment and now it started up!
Thanks once again!
Hi guys
I am thinking about updating my 2.12.50 radio to 2.14 or 2.15 to improve battery life. How shall I do it having nand android installed?
Is it as simple as booting into bootloader (tri-colour screen) and then flash it? Will that not affect my android installation?
Thanks
Yes mate - that's all there is to it.
Sent from my HD2 using XDA App
Can someone please do a tutorial
How do you get your phone into that tricolor screen and what to after. All help is much appreciated.
I have an HD2 running android NAND, there is no windows on the phone. I have an old radio (2.08.50.08_2) and would like to flash a new one but don't know how. All the tutorials i could find were done on windows.
Q) Also when flashing a new rom, will this upgrade the radio?
amachine247 said:
How do you get your phone into that tricolor screen and what to after. All help is much appreciated.
I have an HD2 running android NAND, there is no windows on the phone. I have an old radio (2.08.50.08_2) and would like to flash a new one but don't know how. All the tutorials i could find were done on windows.
Q) Also when flashing a new rom, will this upgrade the radio?
Click to expand...
Click to collapse
You do it exactly the same way as under windows. Switch phone off, hold vol down button in while turning device on and you will get tot the tri-coloured screen. Connect to pc and when "usb" shows up on device screen, flash the radio.
As to your question, it depends. If you flash a stock winmo rom, then the radio will change. 90% of cooked roms do not include radios (there are a few that do/did) and therefore flashing one of those will not change the radio.
ClydeB1 said:
You do it exactly the same way as under windows. Switch phone off, hold vol down button in while turning device on and you will get tot the tri-coloured screen. Connect to pc and when "usb" shows up on device screen, flash the radio.
As to your question, it depends. If you flash a stock winmo rom, then the radio will change. 90% of cooked roms do not include radios (there are a few that do/did) and therefore flashing one of those will not change the radio.
Click to expand...
Click to collapse
Thanks for your help. I'm kinda new to Android and flashing but I am trying to learn.
Thanks again for your help.
Hey Guys,
I have NFI what happened to my phone but I think its bitten then dust..
I've been running NAND Android builds for a while now, the phone has been a bit funky for a few weeks now so I wanted to completely wipe and start form scratch..
So I download Task29 a new radio and ROM from the links in the ROM page (http://forum.xda-developers.com/showthread.php?t=933951) and ran Task29 like I have multiple times before.
The install went fine, and the phone rebooted like its meant to but now its stuck on the HTC screen, I can't boot in MAGLDR or HSPL...
So, is it borked??
suitable radio? suitable spl? both are critical. magldr wont work without 2.08.hspl and a ..50.. radio
samsamuel said:
suitable radio? suitable spl? both are critical. magldr wont work without 2.08.hspl and a ..50.. radio
Click to expand...
Click to collapse
The radio that was installed on before running TASK29 was, Radio Leo 2.15.50.14.
It already had HSPL v2.08 and MGLDR 1.3, already installed.
As I said, I've flashed new WinMo and Android ROM's hundreds of times, I mean I dont normally run Task29 before every install but I have multiple times in the past.
I only ran Task29 today as the phone was being really bad so I though a clean install might be the best way to go.
hmm, not sure what to suggest without sounding patronising, hehe,
there are a few people that cant seem to get magldr to start, for no good reason,
reflash the radio (just in case) manually go check the spl in bootloader again (just in case it doesnt say 2.08.hspl,, sometimes what you know for a fact is true actually isnt) and as for magldr, well its susceptible to all the usual flashing issues, , run as administrator, try every usb port, turn off your firewall,,,, try another pc even, , in fact if you have another pc available, try that first.
Thanks for the replies, but I can't get it to boot into MGLDR or SPL thats my problem.
When I turn it on it loads up the 1st HTC logo and hangs.
Is there another way that I can flash a radio of I cant boot into SPL???
I've read something about this before. I don't think it's an easy fix and it may be best to try go back to where you bought it and try get a replacement or send it in to HTC. I'm not too sure if they'll know that you have HSPL installed. I'd say highly likely they will. Have you tried hard resetting? Or can you not get to that screen?
If you want to find more on this just google "HD2 Wsod" or "HD2 White screen of death". You'll find lots if people with the same thing.
My HD2 has something similar but I can get to HSPL but it stays at a blank white screen with normal power on.
What happens when it's off snd you plug in the USB? Does it try start because of MAGLDR or just charge/do nothing?
Skellyyy said:
What happens when it's off snd you plug in the USB? Does it try start because of MAGLDR or just charge/do nothing?
Click to expand...
Click to collapse
Thanks for the reply, when I plug the USB cable in while the phone is off, only the charge light comes up. Doesn't actually try and boot
QuazzieM said:
Thanks for the replies, but I can't get it to boot into MGLDR or SPL thats my problem.
When I turn it on it loads up the 1st HTC logo and hangs.
Is there another way that I can flash a radio of I cant boot into SPL???
Click to expand...
Click to collapse
I know you said you ha e flashed hundreds of times, so you should know this. I am not being patronizing here either, but I will say it anyway. You have gwo different ways to flash a new radio, but both require gou to put gour HD2 into bootloader.
To put your HD2 into bootloader turn the device off and then turn it back on but hold the volume down button wbile it is booting and it will go to bootloader.
Whilr jn bootloader connect via USB cable to gour computer wait until you see USB the wbite bar of bootloader then you can flash the radio, a Win Mo ROM, HSPL, or MAGLDR just wich ever one uou want to flash at that time.
You can use a 500MB to 4GB SD card to flash the radio as well as a Win Mo ROM. You just rename the.nbh file to leoimg.nbh for the radio or the ROM and copy it to the root of your SD card. plasce the SD card back in the device. Put the device into bootloader but do not let go of the volume down botton until you see search hinge on the screen of the device. Be aware though if you flash a official ROM this way it will overwrite everything HSPL and all so you whind up with a stock HD2 again.
Stupid question: you are holding down the volume down button to boot into HSPL right?
HI everyone,
This is the first time for me posting a thread here...thanks in advance.
Well I have a HTC HD2 that is a friends of mines. He was trying to change the radio so it could work in another country and managed to brick the phone. He got tired of trying to fix the phone so he gave it to me. I have tried fixing it with a tool kit I downloaded in another thread here. I managed to get it to boot butt it wouldn't get past T-Mobile screen...I kept on messing with it trying to install a ROM and different radios but non will work and wont turn on anymore but still is able to be recognize but PC(not mobile media center) and the last thing I did was task29. It stopped at 99%...still can load bootloader 3 colors but having a harder time getting the phone recognize by PC. Can anyone help me before I get into a deeper hole? If your need any more detail please ask me...btw the phone is running SPL- 3.03 HSPL in boot loader.
to the rescue !!
Jaimelebrone said:
HI everyone,
This is the first time for me posting a thread here...thanks in advance.
Well I have a HTC HD2 that is a friends of mines. He was trying to change the radio so it could work in another country and managed to brick the phone. He got tired of trying to fix the phone so he gave it to me. I have tried fixing it with a tool kit I downloaded in another thread here. I managed to get it to boot butt it wouldn't get past T-Mobile screen...I kept on messing with it trying to install a ROM and different radios but non will work and wont turn on anymore but still is able to be recognize but PC(not mobile media center) and the last thing I did was tasIt29. It stopped at 99%...still can load bootloader 3 colors but having a harder time getting the phone recognize by PC. Can anyone help me before I get into a deeper hole? If your need any more detail please ask me...btw the phone is running SPL- 3.03 HSPL in boot loader.
Click to expand...
Click to collapse
your friend shouldnt have flashed the radio without proper info !!
radio is the only thing which bricks the device !!!
dont worry we'll try to sort something out !!
firstly start with flashing a proper radio !!
http://forum.xda-developers.com/showthread.php?t=611787
download the radio 2.15.50.14 from this thread and flash it !!
NOTE : if you cant flash radio from ur pc, via nbh installer or the toolkit, you can flash it from a memory card !!
just format a normal memory card, put the radio on the card, rename the radio file to LEOIMG.nbh and get to the bootloader screen !!
follow the instructions from there and flash the radio !!
secondly if you want android or wp7-7.5 on ur device !! hspl 3.03 wont work !!
so install hspl 2.08 for that !!
for winmo6.5 3.03 is ok !!
do a task 29 once and flash any rom or magldr(for android or wp7-7.5)!!
good luck .....
thanks for quick reply
I am trying to do what you instructed me.
Didn't work
I tried it on the PC and it sadly stopped @ 96%, now it wont turn on volume down+power. Battery was charged and i didn't turn off. It displayed error 262. as soon as I can I will try it on sd card. Thanks though.
I was not able to install the radio but did in fact get to task29 successfully and MAGLDR Version-1.13. Now my phone is stuck in the Stick together screen. Can anyone help me from here what should I do. thanks I will be waiting for a responce.
Do you still need help cos its really easy to unbrick your phone and I say this because once I flashed 5 different roms in 2 hours or less and my phone wouldn't even turn on and when it did it would get stuck on the tmObile splash screen and restart but I fixed it and now I'm running the best Rom out there lol... reply to this thread and I'll tell you what to do
Sent from my HTC HD2 using xda premium
The thing is that I can't get any ROM's to finish installing...in the SD card the power button does not work...and in the computer the fartest I gotten was 99% but always stops and gives me error ussualy Error 262. Ireally don't know what to do. MY friend said he took it to an Asian Guy...I noticed that the battery S/N does not match the phone...can this have an effect...I haven't been able to flash any ROMS successfully not even the debranded stock. I flashed several phones and installed many different custom firmwares but this phone has been a real challenge...I'm over 2 weeks in...Thanks for the help thus far you guys are the best...
leoimg.nbh won't start to install
Hi everyone,
I have a severe problem with my HTC HD2 after installing a NAND version of android which did not work very well, than wanting to reinstall winmob 6.5 (vodafone) it startet "loading" the leoimg.nbh from the SD-card, but than stayed in this status neverending. So I interrupted (was that the mistake?? :-( }. Now I'm able to start MAGLDR 1.13, am also able to install another NAND version, but with every version I get the message: problem with android.xxx and so on.
I can start the bootloader modus (SPL-2.08.HSPL 8G XE), also connect by USB, but if I try to reload any leoimg.nbh from SD card - it does nothing, just stays in the bootloader modus.
Did I destroy any hardware by interrupting the non functioning "loading"?
Please help, if you can, what I could do now to get a functioning NAND android again!
Many thanks in advance!!!
freak just try the task 29 and u might return everything to normal condition
and for future never interrupt the installation process as u can brick ur device
for the main topic, i can say that ur device is fully bricked and the only way is taking it to the service center or try flashing directly into the hardware, but thats dangerous and requires professional skills
Plz help!
bigtobitobs said:
Do you still need help cos its really easy to unbrick your phone and I say this because once I flashed 5 different roms in 2 hours or less and my phone wouldn't even turn on and when it did it would get stuck on the tmObile splash screen and restart but I fixed it and now I'm running the best Rom out there lol... reply to this thread and I'll tell you what to do
Sent from my HTC HD2 using xda premium
Click to expand...
Click to collapse
Please can you help me.. I did the same thing.. it kept getting stuck at 0% and then i had to wait like an hour and then i tried again.. now its completely dead!
Please tell me what to do..
Thanks
First of all; This steps can solve your problem. But first of all(don't forget to check 2.08.HSL) try to use "Task29" and if it is success, load Radio ROM 2.15.50.14, and load original Winmo 6.5 ROM (Tmous or EU which phone do you use).
If you are stuck somewhere, then;
Download an original ROM for your HTC device from HTC webside.
- Format your SD card like FAT32 primary.
- Take "RUU_signed.nbh" from an original ROM and copy it to your SD card.
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume down button.
Radio ROM 2.15.50.14;
Radio ROM 2.15.50.14
HD2 Toolkit 4.2.0.1; ( contains task 29, magldr and recovery and also HSPL)
HD2 Toolkit 4.2.0.1
it's revived!
powerofthink said:
First of all; This steps can solve your problem. But first of all(don't forget to check 2.08.HSL) try to use "Task29" and if it is success, load Radio ROM 2.15.50.14, and load original Winmo 6.5 ROM (Tmous or EU which phone do you use).
If you are stuck somewhere, then;
Download an original ROM for your HTC device from HTC webside.
- Format your SD card like FAT32 primary.
- Take "RUU_signed.nbh" from an original ROM and copy it to your SD card.
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume down button.
After several attempts to switch on the phone it finally turned on so I immediately installed stock ROM and it didn't get stuck on 0%.. it worked!!
Do you think I should perform a task 29 now or I can just proceed with installing a new radio and then installing a new ROM?
Thanks again mate!
Apparently I need to install SPL 2.08 before trying to install HSPL and then run android.. anyone know where I can find it?
Nevermind figured everything out Thanks anyway
Click to expand...
Click to collapse
If you want to change your ROM with one another like Android NAND ROM or Windows 6.5 ROM, then use this procedures.
For NAND Android ROM; You must flollow this sequence;
first check your device if it is 2.08.HSPL, and format your sdcard ext3 or ext4 and 1gb (which one you must use is pointed out by your Android chief). Copy new Android ROM into your sdcard's FAT32 section. insert it into your HTC device.
1. do task29
2. instal radio rom 2.15.50.14
3. install magldr 1.13
4. do recovery 5.0.2.6
5. do clear cache and dalvik cache.
6. Choose your android ROM .zip file on sdcard, load and enjoy...
For Windows 6.5 Follow this sequence;
first check your device if it is 2.08.HSPL, Format your sdcard like FAT 32 primary partition. insert it into your HTC device.
1. do Task29
2. Install Radio ROM 2.15.50.14
3. Run LeoCustomRUU.exe like "Run as Administrator" which Windows 6.5 rom you chose to use.
Radio ROM 2.15.50.14;
Radio ROM 2.15.50.14
HD2 Toolkit 4.2.0.1; ( contains task 29, magldr and recovery and also HSPL)
HD2 Toolkit 4.2.0.1
ActiveSync
Hi..
I am new here...
I would like to ask about my htc hd2..
I ve installed android 2.3 and yesterday i tried to update to android 4.0 but something went wrong and now my phone can't load anything...
when i tried to install ROM, it shows phone is not connected...
My ActiveSync also doesn't detect my phone... I can't enter to phone settings coz the phone won't load...
Any ideas ?
Thanks...
Zerocool_uia said:
Hi..
I am new here...
I would like to ask about my htc hd2..
I ve installed android 2.3 and yesterday i tried to update to android 4.0 but something went wrong and now my phone can't load anything...
when i tried to install ROM, it shows phone is not connected...
My ActiveSync also doesn't detect my phone... I can't enter to phone settings coz the phone won't load...
Any ideas ?
Thanks...
Click to expand...
Click to collapse
Are you booting into bootloader and connecting the device to your computer so you can get the HTC Sync connection. Just boot into bootloader by holding the volume down button down and poewering on your device. Connect it to your computer via USB and when you see Serial in the white bar of boo5tloader change to USB you have the HTC Sync connection and can flash your device.
I face a very odd problem with my HD2 EU. After years of 2 different versions of Android on nand I decided to reset it to stock(Vol down+power with leoimg.nbh in root of a FAT32 formatted microsd). When I get in bootloader mode there seem to be 2 instances of bootloader. The first 3 colour screen with all the right wordings lasts a second or two then I get a second 3 colour screen with the same wordings. With my Verbatim 8Gb class4 microsd formatted FAT32 and leoimg.nbh (obtained from the original RUU_Leo_HTC_ITA_1.66.408.1_Radio_15.32.50.07U_2.07.51.22_2_Signed_LEO_Ship.exe) in the root directory, the device does not recognize the file and it's not possible to restore the phone to stock, but I can only get into usb connection.
Being able to get in usb mode with the various versions of HSPL (1-2-3-4) I can still change the bootloader. With the HD2 Android toolkit 4.2.0.1 I can install cLK, Magldr, do a Task29 and repartition.
When I use the RUU installer I can install the RUU_signed.nbh that I used to get the leoimg.nbh BUT when I do it, and it does finish gracefully, on the screen that states the currently installed image THE INDICATION OF SUCH AN IMAGE IS BLANK whilst the name of the image to install is the one I am flashing.If I reflash the same image AGAIN (so I know what's on the device) the info of the installed image is never displayed.So after trying the various bootloaders HSPL and SPL and getting the same result you are my only resort.
Has anybody experienced such a problem? It is as if the the bootloader goes through a script that then starts a second "identical" bootloader (I understand that I may seem crazy) that is not capable of recognizing a leoimg.nbh. All my buttons are still working so it's definitely not a button problem. Therefore in a nutshell the question is: if I can't get the device to recognize a leoimg.nbh is there any other way to make it do so, given that I can communicate via usb without problems ?
Dear Dev's / members
I have problem with this HD2 and cannot find a solution yet!
first thing first. is this a Tmobile of Eu mobile?
i tried flashing factory RUU but after 1% it gives an error saying Radio failed.
tried flash quite a few radio's but still after 100% it says radio fail.
tried flashing from USB cable
tried flashing from SD with leoimg.nbh
no luck.
the guy was using android on it until yesterday. may be he tried to flash a wrong Rom which brick the phone. now only white screen appears.
i can go to bootloader mode but no luck in flashing any thing at all.
Looks like EU model as no logo near earpiece.
if also has white markings on call & end key that would help confirm EU.
If trying to install .nbh file from SD it will overwrite HSPL so check current SPL status in bootloader.
If still on HSPL 2.08 try flashing an NRG WM6.5 ROM & see what happens (they have no radio so if completes then try radio flash if needed, try via USB them SD if USB fails.
Do you get an error code when it fails via RUU ?
thanks for helping mr. B
the error i get is (270) and yes it have white markings on all the buttons. so its confirm EU model. by NRG rom you mean Energy Roms? i tried earlier the energy Rom but no luck. after 1% it gives error.
cannot try mtty method as i'm on windows 7 and in windows 7, it's not showing the USB port. it's radio is corrupted. i think someone must have flashed a wrong Rom.
What standard ROM have you got ? if it a 3.14 rom try connecting HD2 via USB & use HSPL4 toolkit to install HSPL 3.03 & if that installs then try the 3.14 ROM via USB & RUU.
Also eliminate simple issues such as lead & USB port by switching port & using a different USB lead.
Windows 7 64bit ? worth trying another PC & 32bit if can as WMDC drivers on 64bit can be a pain for flashing ...
windows 7 32bit. tried flashing hspl 4 and it says complete but in bootloader it shows 2.08 only. i guess gold card method will solve the problem but it's too complicated. any other suggestions?
i would search for task29 and format the phone back to virgin default then download a windows rom from htc via the downloads page on there website for the phone ,then if it works re task29 it then put android on it with the htc hd2 tool kit witch has every thing other than rom (all u need to do is task29 it then go back to the boot loader and run the ruu rom)
samuel79 said:
i would search for task29 and format the phone back to virgin default then download a windows rom from htc via the downloads page on there website for the phone ,then if it works re task29 it then put android on it with the htc hd2 tool kit witch has every thing other than rom (all u need to do is task29 it then go back to the boot loader and run the ruu rom)
Click to expand...
Click to collapse
No do not run a Task 29 the device. I say this for two reasons, one if you flash the Stock Windows Mobile ROM via RUU the RUU will run a Task 28 before installing the ROM witch is pretty much the same as a Task 29. The second reason is that if you run a Task 29 it will remove the current ROM on the device so it will not have a working ROM anymore. If after the Task 29 you can not get another ROM installed on it the you will not be able to use the device at all anymore.
why not he thinks its bricked so there is no difference if he cant get a rom on it
samuel79 said:
why not he thinks its bricked so there is no difference if he cant get a rom on it
Click to expand...
Click to collapse
No the device is not bricked, a bricked device will not even turn on at all, no vibrations no nothing.
At jacktackle, try to find the earliest stock Rom RUU for your HD2 and try to flash it. It is possible you have what is reffered to as a stuck radio.The only fixI have seen for this is to flash a older ROM version with a older SPL version. If the earliest ROM version does not work start working your way up one version at a time and you might get lucky and get one that will flash.
thanks for all the help guys. but nothing worked. tried flashed old ruu's but reboots at 1% this radio is screwed up. hspl 2.08 is not upgrading nor downgrading. sd card update not working. i guess thats it. will give it back to him so that he can showcase it
first time ever i'm un successful. bad luck! may this LEO rest in peace. 'amen'
jacktackle said:
thanks for all the help guys. but nothing worked. tried flashed old ruu's but reboots at 1% this radio is screwed up. hspl 2.08 is not upgrading nor downgrading. sd card update not working. i guess thats it. will give it back to him so that he can showcase it
first time ever i'm un successful. bad luck! may this LEO rest in peace. 'amen'
Click to expand...
Click to collapse
Before you give it back you can find some of the old test ROMs for the EU or for the TMOUS depending on which version of the HD2 it is. Just make sure if it is a TMOUS that you do not flash a rom version that has a 51 radio with it. Just look at the RUU name and the radio version is in the name. If that does not work then the only fix will be to replace the mainboard cause JTAG would not fix the problem.