Database Users

Solved [Q] Black screen with phone to computer icon. Is it bricked?

I've tried every method I can but none seem to work for my Epic I'm thinking about throwing it down the balcony a calling sprint and tell them I need a replacement so if there any way to help please please let me know??? Miss my phone!!!!!

Looks like your in download mode unplug the usb cable and boot into download mode then odin something.

I EnFamouz I said:
Looks like your in download mode unplug the usb cable and boot into download mode then odin something.
Click to expand...
Click to collapse
I tried it Odin isn't recognize the device.

He's not in download mode anymore, this is just the phone telling you it doesn't have a connection to a machine to get boot informaion from and that there is no firmware to boot it self from.
Do a battery pull and read one of the other 99 threads with the same title as yours.
Sent from my SPH-D700 using XDA App

yaboyloudog said:
I tried it Odin isn't recognize the device.
Click to expand...
Click to collapse
Oh and you can't get into download mode.

Kcarpenter said:
He's not in download mode anymore, this is just the phone telling you it doesn't have a connection to a machine to get boot informaion from and that there is no firmware to boot it self from.
Do a battery pull and read one of the other 99 threads with the same title as yours.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
I did they all say pull the battery and hold both volume keys till you get into Download Mode (which isn't happening) then flash a new ROM. And those post are for other galaxy devices haven't seen one for the Epic.

what did you do before this happened?

yaboyloudog said:
I did they all say pull the battery and hold both volume keys till you get into Download Mode (which isn't happening) then flash a new ROM. And those post are for other galaxy devices haven't seen one for the Epic.
Click to expand...
Click to collapse
You don't hold down the volume keys on the epic. You open the keyboard and hold the 1 key and the power at the same time. That will put you into download mode. Than odin should recognize your device.
Sent from my SPH-D700 using XDA App

hugo87 said:
You don't hold down the volume keys on the epic. You open the keyboard and hold the 1 key and the power at the same time. That will put you into download mode. Than odin should recognize your device.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Your Greatness at it peak all these ppl developer and then there you a genius.....Thank you....but what do I do now.

ok got it but what do I do now
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> param.lfs
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

yaboyloudog said:
ok got it but what do I do now
Click to expand...
Click to collapse
This is what I keep getting...
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> param.lfs
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

yaboyloudog said:
This is what I keep getting...
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> param.lfs
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Reboot computer and phone. Try a different USB port, try a different USB cable. Phone MUST be in download mode for this to work. Keep trying, if it fails, exit Odin, open it again and keep trying. Be sure to unplug and replug the USB cable between Odin attempts.
Some people have had success by removing the SD card prior to using Odin.
Keep trying, it can take multiple attempts before it works.

Its working Thanks your the best...

yaboyloudog said:
Its working Thanks your the best...
Click to expand...
Click to collapse
Glad to hear that.

the exact same thing is happening to me... but i'm stuck on the odin.
this is what i'm getting..
Code:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
<ID:0/004> factoryfs.rfs

Just keep trying. If you still cant get it redownload the tar file again. It takes me 5 trys sometimes.
Sent from my Evo killer!

Make sure you're using latest version of odin 1.61 I think. Also make sure you put tar file in pda... not phone.
Sent from my SPH-D700 using Tapatalk

issues with Odin
I ran into a lot of issues getting Odin to flash the stock ROM on my Epic, including Odin errors, and Odin hanging on " SetupConnection..", but here's what I did to finally get this to work:
-pulled battery and SD card from Epic
-launched Odin just after a reboot of PC
-plugged into PC via USB and held power and the 1 key to get Epic into download mode (SD card and battery still pulled)
-used PIT: victory_8G_100528.pit
-used tar (in PDA section): SPH-D700-DG27-8Gb-REL.tar
-only had the option "auto-reboot" selected
With this scenario, I was finally able to get my Epic back to stock. Thanks to everyone who posted before me on this subject.
On a side note, I'm not 100% whether or not my phone was bricked, but it wouldn't get past the initial Samsung boot screen after I had tried to install some non standard software.

[Q]Odin????

i keep gettin this error below does anyone know how to fix it?
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)

You didn't have your tab in download mode. Completely power off your tab. Then at the same time push power and volume down and hold until black screen has a yellow image. That is download mode, and now, start odin, and connect your tab. One of the rectangles will turn yellow and say COM....You are ready to flash!

[Q] Galaxy y bootloop problem

I attempted the Jellyblast v3 custom rom on my rooted galaxy y, but it seems i made an error and now my phone seems to be bricked. When I try to reboot it i just get the repeated 'S' logo. I tried using odin to flash the stock rom but it fails every time and i get this:
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
I was wondering if anyone could give me some advice on what I should do next

danjonrin said:
I attempted the Jellyblast v3 custom rom on my rooted galaxy y, but it seems i made an error and now my phone seems to be bricked. When I try to reboot it i just get the repeated 'S' logo. I tried using odin to flash the stock rom but it fails every time and i get this:
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
I was wondering if anyone could give me some advice on what I should do next
Click to expand...
Click to collapse
do you get a yellow port mapping?

mjz2cool said:
do you get a yellow port mapping?
Click to expand...
Click to collapse
Yes i do

danjonrin said:
I attempted the Jellyblast v3 custom rom on my rooted galaxy y, but it seems i made an error and now my phone seems to be bricked. When I try to reboot it i just get the repeated 'S' logo. I tried using odin to flash the stock rom but it fails every time and i get this:
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
I was wondering if anyone could give me some advice on what I should do next
Click to expand...
Click to collapse
Maybe the files are corrupt.
Press THANKS please?

danjonrin said:
I attempted the Jellyblast v3 custom rom on my rooted galaxy y, but it seems i made an error and now my phone seems to be bricked. When I try to reboot it i just get the repeated 'S' logo. I tried using odin to flash the stock rom but it fails every time and i get this:
Added!!
Odin v.3 engine (ID:8)..
File analysis..
SetupConnection..
Can't open the serial(COM) port.
All threads completed. (succeed 0 / failed 1)
I was wondering if anyone could give me some advice on what I should do next
Click to expand...
Click to collapse
Run kies first...
Then close kies and then install firmware through odin ...
It will work......
Sent from my GT-S5360

danjonrin said:
I attempted the Jellyblast v3 custom rom on my rooted galaxy y, but it seems i made an error and now my phone seems to be bricked. When I try to reboot it i just get the repeated 'S' logo. I tried using odin to flash the stock rom but it fails every time and i get this:
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
I was wondering if anyone could give me some advice on what I should do next
Click to expand...
Click to collapse
did u get yello icon in odin

[Q] i-9505 bricked?

Hi everybody. I have a i-9505. Two days ago,when i started an app,my phone has rebooted and remains on the home screen "Samsung Galaxy S4". The phone doesn't go on recovery mode but when i try to do this actions, on the top left of the screen appear this sentence written in red: Movinand checksum confirmation fail".I can go only in download mode. I serached in the forum but i have a problem when i try to flesh the firmware stock with odin. It gives me a error:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.58.7-jflte.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Added!!
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011>
<ID:0/011> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
So i downloaded the file pit for my phone but when i try to flesh it i have the same error. If i try to flesh both of them,i have another error:
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009>
<ID:0/009> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My i9505 was rotted and i installed the imperium rom v10. I'll tried to change usb port, i close the process of kies and i installed the driver. Please help me,i'm very sad :crying:

1. Download and run odin.
2. Check Re-Partition, Auto Reboot and F. Reset Time.
3. Click PIT button and add your .PIT file.
4. Put your phone into download mode: Press Volume down + Home + Power.
5. Connect USB cable and the program will detect the phone.
6. Click Start button and wait till finish the process.
7. After it is Done in Odin -> Click on Reset button, then unselect Re-Partition box.
8. Add one stock firmware in AP/PDA.
9. Remove the battery, then enter Device into Download Mode again.
10. Click Start button.
11. Do not touch anything till you see PASS on the program window.
12. Just do a factory reset after flashing using recovery
* You will have to get your device to service center if everything explained before no works. Good luck :highfive:

Joku1981 said:
1. Download and run odin.
2. Check Re-Partition, Auto Reboot and F. Reset Time.
3. Click PIT button and add your .PIT file.
4. Put your phone into download mode: Press Volume down + Home + Power.
5. Connect USB cable and the program will detect the phone.
6. Click Start button and wait till finish the process.
7. After it is Done in Odin -> Click on Reset button, then unselect Re-Partition box.
8. Add one stock firmware in AP/PDA.
9. Remove the battery, then enter Device into Download Mode again.
10. Click Start button.
11. Do not touch anything till you see PASS on the program window.
12. Just do a factory reset after flashing using recovery
* You will have to get your device to service center if everything explained before no works. Good luck :highfive:
Click to expand...
Click to collapse
At the point 6, when i click starts, odin fails. This is the log:
<ID:0/010> Added!!
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Set PIT file..
<ID:0/010> DO NOT TURN OFF TARGET!!
<ID:0/010> Get PIT for mapping..
<ID:0/010>
<ID:0/010> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help me :crying:

I'm in a not-so-different situation, but I need an explanation before:
what is the PIT file and where can I find one?
I suppose it's the file that contain the list of partitions, is it correct?
TY in advance, when I understand this I think I could help you!

Drake9090 said:
I'm in a not-so-different situation, but I need an explanation before:
what is the PIT file and where can I find one?
I suppose it's the file that contain the list of partitions, is it correct?
TY in advance, when I understand this I think I could help you!
Click to expand...
Click to collapse
Yes, you can find it in the forum

If your phone suddenly stopped booting then you probably have a hardware failure.

No more brick of the G950FXXU1AQG5 thanks to the TWRP 3.1.1-2-Dreamlte

Finally, with the new TWRP 3.1.1-2-Dreamlte I have already been able to flash the G950FXXU1AQG5_G950FOXM1AQG5_PHE version and NO STEP NOTHING, it continued to work without the annoying brick later with that TWRP to put a SUPERSU is seconds thing.
Many thanks to the TWRP group:good:

Hey,
They just adapt the bootloader AQG5 with TWRP haha

But what about the prblems coming along with AQG5
thankfully we finally got able to root our AQG5 but am I the only one who is facing some serious issues?
basically i'm facing two issues with are mention down bellow
1: viper4android is not working! in fact when I install it the whole (media) sound of device simply gets muted till I uninstall it!
2: lucky patcher is making my phone roboot everytime I start the app
is it only me or is there anyone else also facing the same issue?
any help regarding any of the above problem would be amazing
lets hope they get solved soon!
otherwise whats the point of rooting itself

wahab96 said:
thankfully we finally got able to root our AQG5 but am I the only one who is facing some serious issues?
basically i'm facing two issues with are mention down bellow
1: viper4android is not working! in fact when I install it the whole (media) sound of device simply gets muted till I uninstall it!
2: lucky patcher is making my phone roboot everytime I start the app
is it only me or is there anyone else also facing the same issue?
any help regarding any of the above problem would be amazing
lets hope they get solved soon!
otherwise whats the point of rooting itself
Click to expand...
Click to collapse
Wugh methods do you use too install busybox?

Soft-Tech643 said:
Wugh methods do you use too install busybox?
Click to expand...
Click to collapse
I didn't tried to install busybox and test those app while busybox running as busybox will make my root un-systemless and I don't want to do that

wahab96 said:
I didn't tried to install busybox and test those app while busybox running as busybox will make my root un-systemless and I don't want to do that
Click to expand...
Click to collapse
Viper Audio need Busybox.....

Soft-Tech643 said:
Viper Audio need Busybox.....
Click to expand...
Click to collapse
No, not with magisk.
It was running fine without busybox on AQF7

lmmerono said:
Finally, with the new TWRP 3.1.1-2-Dreamlte I have already been able to flash the G950FXXU1AQG5_G950FOXM1AQG5_PHE version and NO STEP NOTHING, it continued to work without the annoying brick later with that TWRP to put a SUPERSU is seconds thing.
Many thanks to the TWRP group:good:
Click to expand...
Click to collapse
G950FDXXU1AQG5_OXM1AQG5_India_7.0
i have this firmware on phone but i try to install twrp 3.1.1.2 it stucks i mean not loading / installing after odin sucess

asadnow2k said:
G950FDXXU1AQG5_OXM1AQG5_India_7.0
i have this firmware on phone but i try to install twrp 3.1.1.2 it stucks i mean not loading / installing after odin sucess
Click to expand...
Click to collapse
Hi, the only thing that has to be very, but that very important is that the TWRP 3.1.1-1-Dreamlte works correctly until the version G950FXXU1AQF7 and for higher versions like the 950FXXU1AQG5 you have to use the TWRP 3.1.1-2- Dreamlte.
FLASHING ONE IN THE PLACE OF THE OTHER VERY BAD .... BRICK:crying:
Another thing.
TWRP 3.1.1-2-Dreamlte recognizes the OTR USB, the version TWRP 3.1.1-1-Dreamlte does not recognize it.

wahab96 said:
....
1: viper4android is not working! in fact when I install it the whole (media) sound of device simply gets muted till I uninstall it!
...
Click to expand...
Click to collapse
First make sure you uninstalled all Viper4Android related files and apps. Install the .apk file from the attachment (do not open it after install). Then open Magisk manager and install the Viper4Android module. After the reboot your viper4android will probably work.

THANKS
nicolahinssen said:
First make sure you uninstalled all Viper4Android related files and apps. Install the .apk file from the attachment (do not open it after install). Then open Magisk manager and install the Viper4Android module. After the reboot your viper4android will probably work.
Click to expand...
Click to collapse
because my viper was not working I switched to a custom rom where it's working fine...
but give it a try if I ever find myself on stock rom ever again.
thanks for the support.

I tried with twrp-3.1.1-2-dreamlte.img.tar file
My S8 bricked when I root to it with Odin CF-Auto-Root-dreamlte-dreamltexx-smg950f.tar
Freezed boot screen "recovery is not seandroid enforcing" and SAMSUNG Galaxy S8
Only download mode enable.
I used Odin3_v3.12.7 (BL enable, Auto Reboot enable, F.Reset Time enable, Repartition disable) with BL_G950FXXU1AQF7_CL11544126_QB13847492_REV00_user_low_ship.tar.md5 and BL_G955FXXU1AQF7_CL11544126_QB13847503_REV00_user_low_ship.tar.md5 files
3 times every bricked screen phone
I tried with AQG5 and AQF7 full stock firmware
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1207)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> FAIL! (DeviceInfo)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1207)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> FAIL! (DeviceInfo)
<OSM> All threads completed. (succeed 0 / failed 1)
I tried older versions of ODIN. Failure code changed
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I use DREAMLTE_EUR_OPEN.pit or DREAMQLTE_USA_SINGLE.pit
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried with twrp-3.1.1-2-dreamlte.img.tar file. Everything same BL file
I'm crying
Help me please

Here is the fix, it save me once ...
w w w. youtube.com/watch?v=VTi3uBkpJic