I discovered it when I got my Xperia but at last I made a decision to ask about it.
So - what are the three pins near jack input for? The whole input is strangely key-shaped and hell I don't know for what these pins are.
Can you please tell me? I can't stop thinking about it!
I'm thinking about it as well... I guess this might be UART pins, which would possibly take us to Bootrom mode
But I'm not sure, I don't know how to check it out...
For example in some wired headsets the mic plugin looks like it
Related
I've been using my Touch HD for 8 days now, everything's been great until now.
The headphone socket has stopped working properly - I only get sound through 1 headphone when the jack is fully inserted, and only get stereo by pulling it out by 2mm or so.
Has anyone else had this issue, or does anyone know of a simple fix for it?
I bought this as an unwanted upgrade from someone, so would Orange UK (who it was originally from) or HTC would offer any support? I guess not, but wonder if I took it to an Orange store if they'd ask for proof of a contract or just fix it (any experience in this matter could be very handy!)?
Thanks for any help or thoughts!
I had the same problem but quickly realised that the jack needs to be pushed in firmly.
Works fine now!
Thanks for the reply. I don't think it's quite the same problem - on my HD pushing it in firmly results in getting sound from only one earphone, I need to pull it back to get stereo. I think a contact must have moved to the wrong position, not sure though.
Hi all, i just got my Blackstone last tuesday and i have the same problem. Only i don't have stereo even with the headphone plug a bit out of the jacket. Please tell me there is some sort of setting somewhere for single headphone speaker because i would really hate to return the htc blackstone for a failure like this......
As title says, it used to work properly with both left and right headphones working properly, however now only the right earpiece outputs sound no matter what I try, played music, games, video and all have the same problems.
Could have been something I did with the phone, could have accidentally made it output in the right earphone only. if so, how do I fix it...
Tried other pairs of earphones and all experience the same problems too, the contact should be working as when i insert a earphone, i can hear the electrical contacts being made on the earphone
You can isolate instantly whether it's software or hardware by just reinstalling the firmware.. Then you'll know for sure (when I worked at a Apple reseller, restoring iPod's was the first action I told everyone to take if they didn't know what was wrong)
But I have yet to have seen any balance controls.
Are you using the Samsung earphones that were supplied with the phone? Samsung, and Nokia, use a different configuration to most phones as far as the four-pin socket is concerned, so if you are using any other make, the chances are that only one channel is connected. Also make sure you are using earphones with a FOUR pin plug, not the standard three pin supplied with mp3 players.
Geryatrix said:
Are you using the Samsung earphones that were supplied with the phone? Samsung, and Nokia, use a different configuration to most phones as far as the four-pin socket is concerned, so if you are using any other make, the chances are that only one channel is connected. Also make sure you are using earphones with a FOUR pin plug, not the standard three pin supplied with mp3 players.
Click to expand...
Click to collapse
Standard stereo mini-jack is a universal wiring standard, i.e. tip and two barrel contacts for ground and left/right channels. The fourth barrel contact is usually used for composite video.
If anyone decided to wire their socket differently then you'd never get any earplugs/headphones to work without an adaptor and it would be a totally stupid thing to do.
To the original poster, check whether you've adjusted balance settings to only one side. Not sure how you do that since haven't got mine yet.
Using stock headphones, have not changed any settings to output in right earphones only.will try re flashing when I can
This may sound a bit dumb but you checked you actually properly pressed the jack into the socket? Just asking because the first time I listened to something on my SGS I had the same problem just to notice that the socket was actually tight enough so that the jack wasn't completely in, once I pressed it the missing 1-2mm in the whole thing changed
akselic said:
This may sound a bit dumb but you checked you actually properly pressed the jack into the socket? Just asking because the first time I listened to something on my SGS I had the same problem just to notice that the socket was actually tight enough so that the jack wasn't completely in, once I pressed it the missing 1-2mm in the whole thing changed
Click to expand...
Click to collapse
though that this could have been the problem as well,pushed it all the way in but stop no luck.
Reflashed firmware, still have the problem.... This is already the second problem with my phone, if you have been frequenting this forums you would know that i have also posted a problem with my camera.
So gotta bring down to Samsung svc centre again?
Is there any way i can ask for a 1 to 1 exchange since i have gotten a lemon device...
Qazz~ said:
Is there any way i can ask for a 1 to 1 exchange since i have gotten a lemon device...
Click to expand...
Click to collapse
Yes I'd assume if you describe to them that some key functions don't work properly they should give you a new one, for instance the audio output isn't only for listening to music but also works as the handsfree socket so it is rather vital. You just got a bad copy so go and ask them
akselic said:
Yes I'd assume if you describe to them that some key functions don't work properly they should give you a new one, for instance the audio output isn't only for listening to music but also works as the handsfree socket so it is rather vital. You just got a bad copy so go and ask them
Click to expand...
Click to collapse
Just went down to Samsung svc centre today and described my problems,asked for a replacement and all they replied was "sorry sir, we do not do 1 to 1 exchanges"... Damn was really hoping to get a new phone, anyway now its with them and hope they don't screw anything up with it.
Sound Problem
You solved the problem? I have the same problem sounds to me more slowly in the left side of the headphone. I using Dark Knight 3.
I had such a problem with my old k800i mobile. After buying new earphones, the problem was solved.
Sound Problem
I tried, but no results
the sgs ( GT-I9000 ) uses a different type of wiring for the headphones, is the same nokia uses for the N95, the sgs2 headset wont work! the galaxy tabs headsets wont work, the iphone/ipod headsets wont work!!!!! why??? because the wiring is different!! why?? ask samsung!
ok, are you using the same headset? if yes, try to use them in someone else sgs (gt-i9000) if they work then it's your phone, if they don't ask if you can use his headset in yours, if they work then is your headset, just get a new one keeping in mind what i just told you.
if you narrowed it down to your phone being faulty.. (it happened to me too... ) and I just saw that you are waiting for it to be fixed, just wait until you get it back... ( i hope they will fix it for you too)... in my case they changed the logical board, so it's basically a new phone on the inside.
good luck.
Hey guys,
I didn't see any reference to a solution in the hd2 section so I figured Id ask. I have an HD2 that has a headphone jack problem. Anytime I plug in headphones and the base of the headphones moves a little it will cause one of the ears to go out. I am sure that it is a problem with the female plug as it does not happen in my computer or iPod. Can anyone point me in the direction to get the part to repair it. I don't want to send it in as i think i could do it myself. Thanks in advance!!
Just a quick bumb to see if someones got a solution. Thanks!
Hello,
I have a Problem with my Xperia X1.
The headphone jack is broken and the device will always return to the headset mode.
So I can not hear anyone during a conversation.
I would like to disable the headphone jack completely. Is there a program for that?
Are you sure it is broken?
Does it still deliver sound to a connected headphone?
Usually the detection of an inserted headphone plug is done via dis-connecting a contact in the socket where the plug is inserted (it re-connects when you pull out the plug). The same dis-connection will also happen if some dirt has accumulated at the place where this contact is, so it stays permanently dis-connected.
Over time dirt creeps into all holes of the devices and depending on your usage and storage style that may have happened now. Try to get that cleaned - maybe it helps.
I have however also seen devices where the connector of the socket to the PBA is simply ripped-off - no way to get that fixed afaik.
Luckily one of the wizards here (ultrashot) also has an X1 (as I remember) and he did a lot of true SW hacking to it, maybe he knows a way to intercept the driver or has a hint which driver to de-activate. Mind that he is very busy with really important stuff - so a simple hint may be the only thing you may get.
@ John Carter I have had the same problem for months now, at first it took a couple of mins for the headset icon to disappear after unplugged then it turned to hours and now days if I'm even lucky . I just found this today: HKLM/System/State/Hardware/Headset 0 .This disables the headset but for me it still does not play sound out the loud speaker like I hoped, in locksreen( I use S2u2) mode the headset icon is gone but when in the main interface the icon is still sitting on taskbar or topbar. It really sucks to have to use a mic headset connector to call and answer voice calls. I'm still searching for answer hopefully somethings comes up. Edit: It's a hardware problem not software.
First of all thank you for your answers.
@ tobbbie
The headphone jack is really broken = (
I've already tried to clean it but that dosent helped.
Thank you for your tip. I'm going to ask ultrashot maybe he can help me there.
@ Viper89
Are you sure it's not a software problem with you device?
For the headphone jack is not so important. I would unsolder him. But I do not know if that would still work.
I had also tried to play with the \status key in the registry with the same (non-) effects. I guess you have to intercept/kill the signal from the HW/driver that steers the other parts into what they do. Not sure where the HW signal enters the SW stack and if that could easily be altered (e.g. by dropping a device-driver). You could play with the HKLM\System\Drivers\builtin branch and then go for headset or alike. You may end up with a non-booting device, so take care to back up in case a hard-reset is needed.
If you are willing to play with soldering (and have some skills), try to solder the contacts of the socket new to the PBA. My guess is that the contacts have either come loose on top of the copper part of the PBA (then you can re-solder) or they have been ripped of the PBA including the copper. You then have to guess where the copper-lines went and re-solder. Worst you can un-solder all parts, but this is not easy to do without decent tools. You may bake the PBA around the socket and ruin the device fully in the end.
John_Carter said:
First of all thank you for your answers.
@ tobbbie
The headphone jack is really broken = (
I've already tried to clean it but that dosent helped.
Thank you for your tip. I'm going to ask ultrashot maybe he can help me there.
@ Viper89
Are you sure it's not a software problem with you device?
For the headphone jack is not so important. I would unsolder him. But I do not know if that would still work.
Click to expand...
Click to collapse
No it's definitively a hardware problem. I have actually stopped using my phone for music now and instead my mp3 player. I haven't seen the headset icon for 3 days now so maybe I'm in the clear. I think every time I kept plugging in my headphones to listen to music it kept re-aggravating the headset jack so I figured if I stopped using it completely maybe it will stop messing up and so far it has worked .
Hello people,
I've finally had enough with the headphone problems many have reported, the distorted sound and triggering voice commands. I've previously swapped the jack with a new one(had to buy a whole mid frame) and now it's started doing it again, about a month later(the original one lasted just as long).
The issue is that this phone is huge and when using it in my pocket with the headphones on, it moves that jack with every step. This wouldn't be a problem if the jack was soldered on or at least wired to the board, but instead it's just placed on top.
So I've decided I want to solder it on. I'm a bit scared as I've never soldered to a pcb board... And I might desolder other items. I'm going to hone my skills first on some other broken devices, but at this point I'm pretty sure I'll do it in the end.
Has anyone else here done this? Want to watch me possibly destroy this otherwise great phone? Heh.
Ty
Dude you're nuts. Just go get some Bluetooth headphones, it's 2016!! I literally haven't used my headphone jack more than 3-4 times in the 4 months I've owned this phone.
Also, I'm pretty sure the headphone jack isn't soldered in specifically so that if the jack moves around a little it won't cause damage to the board. This is common on most/all phones. Soldering it down would be a TERRIBLE idea. You will likely damage your phone.
Why didn't you just send it in for warranty repair?
Sean89us said:
Dude you're nuts. Just go get some Bluetooth headphones, it's 2016!! I literally haven't used my headphone jack more than 3-4 times in the 4 months I've owned this phone.
Also, I'm pretty sure the headphone jack isn't soldered in specifically so that if the jack moves around a little it won't cause damage to the board. This is common on most/all phones. Soldering it down would be a TERRIBLE idea. You will likely damage your phone.
Why didn't you just send it in for warranty repair?
Click to expand...
Click to collapse
Hi, I couldn't send it in because I unlocked it, which voided the manufacturer warranty. If I remember correctly on my old galaxy s4 it was plugged in with a cable, which was a much better solution. The reason my sound interrupts is because when it moves, it moves the pins on the board causing slight interruptions.
However the pins in the jack are long enough and soft enough that they would bend first instead of breaking the board.
And about Bluetooth headphones? I've bought 3 different sets, they either have huge controllers hanging and pulling on one side, or they are too big, or they're poor quality, I've spent more than I want to admit on different sets (see attachment).
So today I'm going to try and solder the jack, and throw this phone away if I break it and buy a small one, that doesn't put that much pressure on the jack in my pocket.
Stay tuned. I should take pictures.
No go
Well, it didn't work. I knew it would be hard to solder the little legs that where under the actual jack. Getting them all melted and touching before they cool down, without melting the plastic or the rubber around the jack was not possible in the end.
Only 2 of the 5 pads actually stuck together, and there was only a buzz coming from the headphones. I decided to open it again and remove the solder just in case something was shorted, I didn't want the sound chip to get toasted. My biggest mistake was leaving the glue on the jack, which stuck to the mid-frame. When I pulled that apart, the jack, with the two pads came with it.
I'm putting the pictures up if anyone wants to have a look at the mess, you can see in the first and second picture why my sound is interrupting: the pad is damaged from continuous friction.
The phone still works so I've lost nothing other than my time.
BTW, at the moment I'm using wired headphones to a Bluetooth adapter. Until they make smaller/lighter wireless headphones I'm stuck with this.
They got Bluetooth without the wire hanging thing that bugs ya (bugs me too) don't have a name or link right now but a quick Google search should pull them up
Ken C said:
They got Bluetooth without the wire hanging thing that bugs ya (bugs me too) don't have a name or link right now but a quick Google search should pull them up
Click to expand...
Click to collapse
Yea, I saw Jordan Keyes review these ones. They are too much like having screws screwed in your ears. If they can get them smaller, and still have 2-3 hours battery, I'll be interested.
I am not sure how the LG Tone type of Bluetooth ear buds are any more intrusive than regular earbuds with a cord hanging down the side of your body! They definitely last a long time for me.
bv90andy said:
Yea, I saw Jordan Keyes review these ones. They are too much like having screws screwed in your ears. If they can get them smaller, and still have 2-3 hours battery, I'll be interested.
Click to expand...
Click to collapse
How about these
Use this instead, it's a taotronics tt-br05 Bluetooth wireless receiver, you can plug your wired headphones in it and use Bluetooth instead of the 3.5mm plug.
Has play/pause and volume/track change buttons. Also has a mic for calls.
Search in Amazon.
Ken C said:
How about these View attachment 3865297
Click to expand...
Click to collapse
They only have 1 hour battery before you have to plug them in the little tube to charge again. The battery technology isn't there yet.
kadopt said:
Use this instead, it's a taotronics tt-br05 Bluetooth wireless receiver, you can plug your wired headphones in it and use Bluetooth instead of the 3.5mm plug.
Has play/pause and volume/track change buttons. Also has a mic for calls.
Search in Amazon.
Click to expand...
Click to collapse
I have actually been using this
Good option, but it wasn't great sound quality.
Anyway, I've bought a second hand Xperia z5 compact and use that now. The moto x style has become a in house tablet.