Related
PROBLEM:
Now, the problem all started when try to format the micro SDHC on the phone or on the PC with card reader.
Tried with differ format program also low level not worked.
DONT USE THESE!!! Waste of time!!!
SOLUTION:
So after doing some thinking about the situation, I figured that there was a problem with the card inserted and find the file EncFiltLog on it.
It is the WM 6.1 encription file. You can't delete, move files from or in to the SDHC.
The best way to solve this issue, as the hard-reset DOES NOTHING to fix this issue, would be to have windows hopefully find the connected device and format it. Here are the EASY steps which DO NOT involve using a dozen computers and has provided the same result EVERY time; which is a working on my 8gig memory in my HTC HD.
1. Connect the HD to the computer and select DISK DRIVE as the option on the on-screen popup on your phone. Don’t select ACTIVE SYNC. If you miss it, then go into your phone and press START>SETTINGS>CONNECTIONS TAB>USB to PC and select the bullet of DISK DRIVE and hit ok.
2. On your computer, (USING A WINDOWS XP MACHINE), go into your "My computer"
3. A window for will open with two columns.(If not, change the view to "Group") We are looking at the RIGHT side right now. In there is has three categories, and we are only focusing on ONE of them. LOOK for STORAGE which should be the center category.
4. Click with right to the desired "Storage device; A: ; D: E;", it will take a minute or two depending on your computer speed and environment to populate your hard drive and connected memory devices.
5. You will eventually see your PHONE internal storage listed. IT WILL TAKE SOME TIME BECAUSE YOUR PHONE INTERNAL STORAGE IS CORRUPTED!
***BE SURE WHAT YOU ARE LOOKING AT IS IN FACT YOUR PHONE AND NOTHING SOMETHING ELSE LIKE YOUR MAIN HARD DRIVE OR SOME OTHER STORAGE DEVICE WITH IMPORTANT FILES ON THERE***
****I TAKE NO RESPONSIBILITY IF YOU FORMAT THE WRONG DEVICE***
6. Choose format and let it format the drive. This should also take a few minutes. Select FAT32 and name is whatever you want! Let this finish COMPLETLY!
**Your almost done**
7. Now you can copy, anything you want on it, but if you put again in to the PDA then the
EncFiltLog will come on again. But at least you not have to throw away the card,
you can use it again.
8. Finally my last comment:
If you want to speed up the card (.cab installation, copy, move ...etc.....)
the best way after all this work listed above, you should made a BACKUP from all your PERSONALITIES and
make a HARD RESET.
After it should speed up all the programs and processions with the card.
If you done then one IMPORTANT THING!:
YOU SHOULD NEVER EVER TAP ON THE CARD ENCRIPTION IN THE SETTINGS,
NOT EVEN THINK ABOUT IT!!!!!!
Hope this helps you all out!!
BTW: I want to say thanks to XDA-FORUM (all people) to make my life easier
and to found the right gadgets to use, to play and enjoy it....
Wow - not bad at all for a first post!
Welcome to the forum!
Thanks for providing a solution!
krnkris said:
PROBLEM:
Now, the problem all started when try to format the micro SDHC on the phone or on the PC with card reader.
Tried with differ format program also low level not worked.
DONT USE THESE!!! Waste of time!!!
SOLUTION:
So after doing some thinking about the situation, I figured that there was a problem with the card inserted and find the file EncFiltLog on it.
It is the WM 6.1 encription file. You can't delete, move files from or in to the SDHC.
The best way to solve this issue, as the hard-reset DOES NOTHING to fix this issue, would be to have windows hopefully find the connected device and format it. Here are the EASY steps which DO NOT involve using a dozen computers and has provided the same result EVERY time; which is a working on my 8gig memory in my HTC HD.
1. Connect the HD to the computer and select DISK DRIVE as the option on the on-screen popup on your phone. Don’t select ACTIVE SYNC. If you miss it, then go into your phone and press START>SETTINGS>CONNECTIONS TAB>USB to PC and select the bullet of DISK DRIVE and hit ok.
2. On your computer, (USING A WINDOWS XP MACHINE), go into your "My computer"
3. A window for will open with two columns.(If not, change the view to "Group") We are looking at the RIGHT side right now. In there is has three categories, and we are only focusing on ONE of them. LOOK for STORAGE which should be the center category.
4. Click with right to the desired "Storage device; A: ; D: E;", it will take a minute or two depending on your computer speed and environment to populate your hard drive and connected memory devices.
5. You will eventually see your PHONE internal storage listed. IT WILL TAKE SOME TIME BECAUSE YOUR PHONE INTERNAL STORAGE IS CORRUPTED!
***BE SURE WHAT YOU ARE LOOKING AT IS IN FACT YOUR PHONE AND NOTHING SOMETHING ELSE LIKE YOUR MAIN HARD DRIVE OR SOME OTHER STORAGE DEVICE WITH IMPORTANT FILES ON THERE***
****I TAKE NO RESPONSIBILITY IF YOU FORMAT THE WRONG DEVICE***
6. Choose format and let it format the drive. This should also take a few minutes. Select FAT32 and name is whatever you want! Let this finish COMPLETLY!
**Your almost done**
7. Now you can copy, anything you want on it, but if you put again in to the PDA then the
EncFiltLog will come on again. But at least you not have to throw away the card,
you can use it again.
8. Finally my last comment:
If you want to speed up the card (.cab installation, copy, move ...etc.....)
the best way after all this work listed above, you should made a BACKUP from all your PERSONALITIES and
make a HARD RESET.
After it should speed up all the programs and processions with the card.
If you done then one IMPORTANT THING!:
YOU SHOULD NEVER EVER TAP ON THE CARD ENCRIPTION IN THE SETTINGS,
NOT EVEN THINK ABOUT IT!!!!!!
Hope this helps you all out!!
BTW: I want to say thanks to XDA-FORUM (all people) to make my life easier
and to found the right gadgets to use, to play and enjoy it....
Click to expand...
Click to collapse
Yesterday it happens for the second time that my SD-Card gets corrupt again, the first time it happens with a 8 Gb SDHC Sandisk and now with a 16 Gb.! After a hard-reset.Didn't know before I read this post that this could happen ever!??
And indeed I couldn't write or read on the card or format it again, even with a cardreader!
Both cards are useless about €120,- thrown away, gone
Didn't know before I read this post, that this is an WM 6.1 encription issue. Never used or even tap it.
Now I format another 8Gb like the way you describe here, i hope that when i need to do another hard-reset i can use the card again!
BTW, its a little bit strange to me that there are so little reaction from other users here about EncFiltLog problem?
I hope that there will come a solution in WM 6.1 to prevent that b!llsh!t.
Thanks for the great support, i hope it realy works!
Nice post
I have one more question:
What may happen when I delete this encryption file? Is it possible?
P.S. Sorry for my english :/
Hi Everyone!
The best way, if you purchase a new card, to FORMAT at first.
Then you put in to your phone and try not to teke it out any more.
If you want to use it as USB reader the as I write in my first post
START>SETTINGS>CONNECTIONS TAB>USB to PC and select the bullet of DISK DRIVE and hit ok .
In this case you can use the phone as a card reader.
It is speed up the file transfer vs. ACTIVESYNC.
If the card is not recognised ether way then,
because of the too much taking out - - put it back; went to faulty.
You can go back to the store for guarantee replacement.
The EncFiltLog is a problem only if you encrypted the card.
The solution to delete it and use as new card described in my first post.
If you put a new card in to the Phone then this file seem to be created by the OP system.
You can delete with format, but it will come back again and again.
krnkris said:
You can delete with format, but it will come back again and again.
Click to expand...
Click to collapse
Your right, the file is still there again!
But I have also a question about a next( hope not) hardreset on my device!
Is it better to format the SD-card (with USB on the device) before or after the hard-reset to save the further use of the card?
Because in my experience you have to start installing everything over again, because the data on the card was anyway corrupt and useless.
It is NOT recommended to use the MS Windows Format command to re-format any SDHC card - it will format them, of course, but with the wrong cluster size, slowing access speed down and possibly causing other problems.
I would suggest to always use a tool like Panasonic's SD Formatter when formating any kind of SD card. You can get it here: http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html
-Valynor
Valynor said:
It is NOT recommended to use the MS Windows Format command to re-format any SDHC card - it will format them, of course, but with the wrong cluster size, slowing access speed down and possibly causing other problems.
I would suggest to always use a tool like Panasonic's SD Formatter when formating any kind of SD card. You can get it here: http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html
-Valynor
Click to expand...
Click to collapse
Also good to know, but does it also prevent or solve that EncFiltLog problem?
Is there no registry tweak to turn off or delete that W 6.1 encryption option anyway?
luckyuser said:
Also good to know, but does it also prevent or solve that EncFiltLog problem?
Is there no registry tweak to turn off or delete that W 6.1 encryption option anyway?
Click to expand...
Click to collapse
No as far as I know.
Will creating a read-only, hidden folder called "EncFltLog.menc" on the card prevent this problem?
Phil_123 said:
Will creating a read-only, hidden folder called "EncFltLog.menc" on the card prevent this problem?
Click to expand...
Click to collapse
What do you mean?How do you do?
HI folks, glad to find some peeps who are suffering from the same problem...
The solution here seems not to work for me, as I hard-reset my TouchHD before I found out about that encryption ****up...
Is there any solution that allows you to reformat the card?
Not to mention that I NEVER touched that damn encryption option as I really never trust M$ that far with my data... seems it got me Pwned anyways...
Anyone ever tried to Write M$, tell them what a bunch of wacky Ho's they are and demand a new miniSD Card from them?
sorry for my language but atm I mad as hell as I just lost a 8GB and a 16GB sanDisk...
I experienced a lot of bc during all the yaers messing with M$ stuff but this ****up ins unbelievable...
I had the same problem with my 8gb sandisk.
I would like to add that I was able to retrieve most of my files from the memory card using EASEUS Data Recovery Wizard Professional. You need to do the data recovery before attempting to reformat the card.
Hi guys sorry for messing around in your forum but this post is the closest solution to my problem. I cannot format or save anything to my 16gb sandisk card because of that bloody encryption file. Now the problem is that I'm a Kaiser user and I do not have disk mode in my phone, so has anyone successfully formatted their card without using disk mode?
one very quik question. Does this fix the problem for good? you can use the sdhc card with the phone or will it always end up with menc file?
card unreadable in one night
Yesterday, my sdhc 8gb card was working properly but in just one night something happened to it. In the morning, I came to know that it is not more being recognized by htc hd2. Every time I soft reset or hard reset the phone a message come up saying "Do you want to format this storage card to make it readable? this will permanently delete any files on the card." when I click no nothing happens and phone keeps on working and if I click yes then the card is formatted in just 1 second. I tried formatting the card myself from phone format tool (there is format card tool in tools section of the phone) but it is showing only 30.61 mb instead of 8gb.
After reading this thread, I think the problem is with EncFiltLog. Actually I backup my phone and card yesterday with sprite backup. I also backup EncFiltLog on my pc. Now after hard resetting the phone I delete the newly created EncFiltLog file by the fresh WM 6.5 installation after hard reset. I deleted that file from my pc by using the phone card storage as disk drive instead of activesync and simply shift+delete the file from removable storage in My computer. After that I copied all the phone card backup (including EncFiltLog - old one) on the freshly hard reset phone. Now all of sudden in just one night phone sdhc card is not able to recognized by phone.
Moral of the story: Never backup EncFiltLog. Keep the newly created EncFiltLog file by wm 6.5 after hard reset and copy your all files and folder from card backup to phone card (excluding EncFiltLog) after a hard reset. Don't ever overwrite the newly created EncFiltLog.menc file with old one from backup.
Reason: I think WM 6.5 pairs the newly created EncFiltLog with its some key on phone internal storage. Remember how encryption works? I am talking about public key and private key pairing. I think WM6.5 pairs one key stored in EncFiltLog with another key stored inside the phone interal storage which is itself freshly created after the hard reset but when we copy the old EncFiltLog from storage card backup to freshly hard reset phone storage card, those key pairs won't match anymore and windows mobile 6.5 simply locks up the card.
it is my own opinion.
One more clue
Ok guys, I've got one more clue after googling and reading other threads on this forum. May be HTC is supplying fake 8gb sdhc card with hd2.
I've came on that conclusion because yesterday there was more than 5 gb space left on my phone storage card. In the night RSS Hub software has updated all the feeds and stored those feeds on storage card (I've set feeds to be stored on storage card). I think something has been gone wrong there. May be the actual capacity of this fake storage cards in far less than what is written/claimed on the card (i.e. 8gb). In the night as soon as the RSS Hub stored feed on the card, it somehow corrupted the card FAT writting its data on sectors of the card where it should not be.
Hence the card is corrupted now just showing 30.61 mb instead of 8gb. There exists no solution for this situtation till now. I've sent mail to HTC regarding this on their customer support page. Let's see what would happen now. I suspect either HTC or my dealer would say that the storage card don't come under warranty. Let's see now. I will update the thread soon.
My problem is the same.....
after HSPL I faced "Do you want to format this storage card to make it readable?..." and after that I lost my mSD.
Format Storage Card didn't worked. it shows 30.61MB , Cluster Size: 0KB
also Clear Storage didn't worked...
System > Memory > Storage Card > Total storage card memory: Not installed
Is there any other way to fix this problem? because of my country, it is difficult to use HTC Service...
Just had a though and wondered if anyone had tried it.
We know when we take a sim card out and boot up WP7 it boots as if it a virgin install.
So my question is if we were to reflash the phone with a second sim card can we then insert the original sim card after the install completes to save us losing all the data and settings?
Has anyone tried this?
EDIT: I meant SD Card not sim card
No replies
If anyone is going to install the new rom would it be possible that you could insert a second sim when reflashing and after the flash it complete reinsert your old original sim and see if it works and keeps your old settings?
If not it will only need a reset to reformat the original sim so nothing to lose in trying this, I would try myself but I have too much on my sim to lose at the moment and cannot try until weekend as I need my phone through the week.
Thanks
ShaGGy_UK said:
Just had a though and wondered if anyone had tried it.
We know when we take a sim card out and boot up WP7 it boots as if it a virgin install.
So my question is if we were to reflash the phone with a second sim card can we then insert the original sim card after the install completes to save us losing all the data and settings?
Has anyone tried this?
Click to expand...
Click to collapse
whoops, didnt mean to hit thanks! oh well, one for your collection!
from my point of view it wont work, the SIM being there or not wont make the blindest bit of difference when you flash it, the installer will wack anything on the SD card, which is the only place that could keep the data intact
if your looking for backup wait a while, Windows phone device manager will soon have a backup program built in to it, your phone will need to be unlocked as its not MS supported but other than that it should backup you data and your app data allowing you to flash to your hearts content, and keep your data.
i dont know if it will install apps again though, i suspect not, but its progress!
You got a thanks back
What I meant was, if you power down your WP7 and remover the sim the phone boots up perfectly but none of your contacts are there or emails and preferences.
If you the power down and re insert the sim your phone boots up as normal with all your settings.
So if we reflash using a different sim card the after the flash is complete, power down the phone remove the sim card and replace it with the one you were using before the reflash, would it not use the setting stored on the older sim card?
I have the manager registered so will use that when its out but this was just an idea and wondered if anyone has tried it.
(power down your phone and remove the sim and power up and you will see what my logic is )
DOH I meant SD card not sim (brain dead )
ShaGGy_UK said:
DOH I meant SD card not sim (brain dead )
Click to expand...
Click to collapse
ahh, yes now that makes a lot more sense!
ill check, i plan on reflashing on sunday to update to NoDo, i need to backup all my app data first just incase so it will need to wait until then, you would probably need to make sure the old SD card was the same size as the new one, just incase it checks that out.
It won't work... I bought some SD cards last week and swapped them out and if the info on the phone doesn't match the info on the card, it won't keep the info each time you restart...
For instance, if you insert new sd, get the green theme like a new phone, change to orange theme, turn phone off and on, it goes back to green as its still looking for original card...
Thanks for letting us know, its a pity as it would make reflashing so much easier
Technically it won't work anyway as the sdcard would be part of the raid set that wp7 makes. You cannot just take data from one raid set and add it to another.
The sdcard in wp7 is not just used as additional storage it is treated as one big lump.
norgan said:
Technically it won't work anyway as the sdcard would be part of the raid set that wp7 makes. You cannot just take data from one raid set and add it to another.
The sdcard in wp7 is not just used as additional storage it is treated as one big lump.
Click to expand...
Click to collapse
now that isnt quite true,i say quite because doing this doesnt means its just takeing it from the SD card but the idea is the same, ive done a manual backup of the data from the SD card, visible through Windows phone device manager, ie, ive gone through the application folder and copied the IsolatedStore of the programs i wanted to keep the data for.
it does mean that i still need to install the app, but i can just copy the IsolatedStore back to the correct folder which will give back all the data and original settings before the reflash.
Pretty much exactly what the title says. I have Yuki's v4 lang 2 WP7 Rom installed, as well as Rafdroid's android SD build on my SD card. I would like to update to Yuki's v5 lang 2, but I don't want to do that if it's going to mean I have to reinstall WP7 and Rafdroids SD build losing everything because that takes forever and I don't want to lose all of my data. So if anyone knows how to do this without having to repartition the drives please point me in the right direction ! Thanks.
I was sort of wondering the same thing. This is something I want to try: Install the new ROM with no SD card on the phone, then factory reset and put the SD card back on while in magldr... I think it should work just like when resizing the wp7 partition to dual boot Android... but don't know for sure... Yet!
That might work, but I have a feeling when you flash without the SD card, some problems are likely to occur. That or when you put the SD card back in after flashing a new WP7, it might re-partition the drives to FAT16 and unallocated. I'll give it a go, because I'm going to put a new SD build on my card anyways, I'll let you know how it turns out.
EDIT: Nope that didn't work, it re-partitioned the drive just like I thought it would.
Anybody got any more ideas for other people to try?
idk if this will work, but if you have a spare sd card, flash it with that in it then put in the old one
I've also heard you can copy the partitions to a separate drive (such as a separate SD or USB hard drive) and then copy them back after you've reinstalled the WP7 ROM, however it didn't work for me (I'm using Xbmod v 1.11 NoDo). WP7 kept saying "Your storage card has changed, please format or replace blah blah" something like that.
You can try it but I would suggest just doing it the long way as you know it'll work, and you're less prone to make mistakes once you get it down (after wasting HOURS of making mistakes, I can reflash a windows ROM and re-partition everything including putting my Android build back in under 15 mins
Hey, I want to upgrade memory card, now I have some sandisk 2Gb, regular card... and I want to have little bit more space and speed...
So, how can I replace this card without resetting the phone and loosing all of my apps and settings? is there any trick?
Thank you
Angelus1984 said:
Hey, I want to upgrade memory card, now I have some sandisk 2Gb, regular card... and I want to have little bit more space and speed...
So, how can I replace this card without resetting the phone and loosing all of my apps and settings? is there any trick?
Thank you
Click to expand...
Click to collapse
you are going to have to hard reset the phone anyway. You could try to (B)ackup and send any inoffensive cab using cab sender beforehand, but because of the different size it probably wont work (no harm trying though, especially if your bigger card is incompatible, then you can (R)estore to your 2Gb).
If you haven't named your phone 5 times in zune then it will restore your apps though not your games progress (search, it may now be possible, same for SMS)
Oh i nearly forgot, if you want your 2Gb card useable again you might want to add a partition and storage unlock it (but do it after you (b)ackup) unless you know someone with a nokia
thanks m8 ) I have now 8GB Adata class 2, and it's not working really good, sometimes it just appears message that this card is changed, fault or something and I need to do hard reset... I also have sandisk 2GB original, and it was working quite good, until today, it show me same error as Adata, after I pooled out my SIM card -.- I guess I will have to buy another card...
Anyways thank you for your answer and help
look in this topic for find compatible cards
http://forum.xda-developers.com/showthread.php?t=914780
Nice info, i´m about to do the same and this just helped me.. thanks.
dxdy said:
look in this topic for find compatible cards
http://forum.xda-developers.com/showthread.php?t=914780
Click to expand...
Click to collapse
Hi, yeah I know about that thread, I bought Adata 16GB class 10 earlier today and it's working fine for now, hope it will stay this way.
al svejedno, hvala ti
Robbie P said:
you are going to have to hard reset the phone anyway. You could try to (B)ackup and send any inoffensive cab using cab sender beforehand, but because of the different size it probably wont work (no harm trying though, especially if your bigger card is incompatible, then you can (R)estore to your 2Gb).
If you haven't named your phone 5 times in zune then it will restore your apps though not your games progress (search, it may now be possible, same for SMS)
Oh i nearly forgot, if you want your 2Gb card useable again you might want to add a partition and storage unlock it (but do it after you (b)ackup) unless you know someone with a nokia
Click to expand...
Click to collapse
good point op im dual booting with 4gb but i need to upgrade
let me get this straight all we have to do is stick a new sd card in and hard reset?? is that all? i got nothing to back up by the way??
i presume we have to set up dual boot through storage lock etc
Moschino02 said:
good point op im dual booting with 4gb but i need to upgrade
let me get this straight all we have to do is stick a new sd card in and hard reset?? is that all? i got nothing to back up by the way??
i presume we have to set up dual boot through storage lock etc
Click to expand...
Click to collapse
Yes, new card in then hard reset.
If you want the smaller one back, you have to send the smallest (1Gb) partition and storage unlock it first. Then new card in and hard reset. your new card will have the same partition set up on it, you will have to remove this first if you want to try and (R)estore. Then set up any size partition you want.
At least I think you have to have a partition on your SD for storagelock to open. Somebody might try just storage-unlocking the sd and check on pc whether it is readable (200mb).
I've been running wp7 on my hd2 for awhile now and recently wanted to dualboot it to android.. looking at the guides I'm not quite sure about this, will using the partition managers format my data currently held on wp7?
I don't want to lose my texts or contacts and I don't want to have to call ms again for another activation code since I seem to have lost the notepad doc I saved it in xD
I may be wrong but I think it will remove what is on your card already. You can always buy a second SD card and use it to run Android from, just dont boot to WPY with that SD card in the device or it will format it for use with WP7.
how big is your card? you should at least be using a 16gig card if you want to DB, but 8gig is still fine BUT all your files/ data will be erased since you need to reset the phone. Alternatively just like what T-Macgnolia said, get a 2nd card & place the SD ROM there & boot from magldr.
this is what i followed - again yesterday - for my friends HD2's dual Boot system.
remember that the partition for Windows should be a little larger than that of the Andy.
http://www.jayceooi.com/2011/02/10/...hone-7-and-android-on-htc-hd2-with-1-sd-card/
as long as you do things right all will be OK but wrongly done You WONT boot into WP7 again as the partition will be corrupted.
What I do is Get another SD card & make an exact mirror/ copy of the one i use for WP7 so if one fails I still have a backup. Before proceeding though make sure that Both Cards do boot into WP7. check out the link below, it might help.