Wildfire ROm install problem :( - Wildfire General

Hi All. about 3 days trying to install to wildfire rom. gold card I did. I've downloaded too many RUU says all incorrect or customer ID error.
Old Sd card in the phone have an OTA file named OTA_Buzz_Froyo_HTC_TUR_2.34.468.31.28.468.3_release_166222nd4emyz0b4lcl3nv.zip
I try to install this file gives error (Status 7)
trying to install custom roms e: can not open / sdcard / update.zip (No such file or directory) error. Before i install custom roms, replace the device's 512 MB card to with 4 GB card its a real problem. Applanet installed. i downloaded rom manager to try with it, package installer says the problem occurred while parsing package device asking adjust time after every boot, When I try to install anything from memory card, with clockwork recovery gives error (Status 0), Pls help.

did you find an answer i have the same problem lets get intouch i am in istanbul too

Kardeş çözümü problemi cozemediysen mesaj at
Sent from my HTC Desire using XDA App

teli sattim kurtuldum kardes saol
Sent from my Vodafone 945 using XDA App

open this link
brother hack out there may you solve your problems
http://forum.xda-developers.com/showthread.php?t=1145035

Related

problem rooting tattoo

I have made a goldcard which seems to work fine but when I run rootTattoo i get lots of errors such as no memory left and out of space. Anyone had a similar problem ?
Nope...worked fine for me back then...did u insmod tattoo-hack.ko?
No i did not what should i do ?
Well no originally i ran a batch file that has all of the commands but it did not work , then i tried manually and when i tried to change perms on the m7 file, "adb chmod 755 /data/local/bin/m7" i get a permissions error ? and hence the later changes do not work.
I have this problem with my phone when i first got it and when i updated to the offical orange rom from the htc site
and the only way i could get over it was to flash the htc wwe-rom download (goldcard needed)
http://forum.xda-developers.com/showthread.php?t=603286
its at the bottom of the first post then i rooted with iclick and all worked...
hi
Ive recently bought a htc tattoo and trying to root the phone but with no luck
every time i keep updating the RUU i get a error message 131 customer ID, even when trying to root the phone with 1click root it appears a message no more space left, i have also made a goldcard with my sd card and it worked but dont know why i can't root my tattoo?

[Q] Bad Rootedupdate? <Solved>

Hi all,
I've been trying to root my legend again (had to unroot it after the first time because I got stuck in a boot loop..)
But now I get stuck at the last step; flashing rootedupdate.zip
Let me first say that everything upto running step2-windows.bat went well, except for step2-windows.bat being unable to write rootedupdate.zip to my sdcard (I/O error).
So I manually copied it to the sd-card to be able to flash it.
However, it now gives me an error, saying
"E: Can't open /sdcard/rootedupdate.zip (bad)"
Does anyone recognize this or know what might cause this? I've tried different rootedupdate.zips, from different locations, but keep getting the same error.
Try download any other rooted rom.. just flash the other rom instead..
Sent from my Legend using XDA App
whitetigerdk said:
Try download any other rooted rom.. just flash the other rom instead..
Sent from my Legend using XDA App
Click to expand...
Click to collapse
Where to find another rooted rom then?
I've already tried different rootedupdate.zip files, since that's the rooted rom always used in guides.
Just flash CM or B or any other from dev forum.
Sent from my HTC Legend
I'm trying to do so now, but I now get stuck at the second step itself. It gives me the following output in my command line;
Code:
Legend Root Step 2
Pushing required files to device...
error: protocol fault (no status)
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
- exec '/system/bin/sh' failed: No such file or directory (2) -
Pushing update file to device sdcard - this may take a few minutes...
- exec '/system/bin/sh' failed: No such file or directory (2) -
To give some more details;
- HBOOT 1.01
- Android 1.31 is running
- Goldcard succesfully created (even re-did this to be sure)
- Step 1 completed succesfully (as far as I can see)
Does anyone know how to solve this?
Just follow the instructions for fake-flash.
Sent from my HTC Legend
BlaY0 said:
Just follow the instructions for fake-flash.
Sent from my HTC Legend
Click to expand...
Click to collapse
You rock!
Never thought of using fake flash for this purpose
But it worked like a charm! Thanks!

[NAND][CWM] Flash Error

Hello, this is my first time trying to flash a NAND ROM on my HD2. The ROM im trying to install is a CWM one not DFT, but when i try to flash the 400mb image, via usb flasher in magldr i get the following errors.
An error has occurred
Read below for more information
Error Description: send partition data failed
Info: .\RSPL\RSPL.cpp (815)
Error Description:
Info: .\RSPL\RSPL.cpp (541)
Click to expand...
Click to collapse
Please help me with this situation, as of now i cant even boot Windows OS so my phone is pretty much useless right now. Thanks
Make sure "Allow USB connections" in ActiveSync or WMDC on Vista/7 is unticked so it doesn't allow.
Sent from my HTC Vision using XDA App
Skellyyy said:
Make sure "Allow USB connections" in ActiveSync or WMDC on Vista/7 is unticked so it doesn't allow.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
I'm sorry, but i tried what you suggested but I receive the same message. One thing i did forget to mention is that its an Apps2SD rom, do i necessarily have to partition the SD card or will that not matter. Another thing is if I ultimately decide to flash a DAF Rom, will this message have any effect on the DAF flash?
No that wouldn't matter at all. It would still recognize the USB and flash it. Judging by your name, are you using OSX?
Sent from my HTC Vision using XDA App
cwm zips are for clockwork recovery flashing only. Not for DFT usb flasher
blakphoenix said:
cwm zips are for clockwork recovery flashing only. Not for DFT usb flasher
Click to expand...
Click to collapse
indeed you need to install CWM and then flash your ROM in CWM
Skellyyy said:
No that wouldn't matter at all. It would still recognize the USB and flash it. Judging by your name, are you using OSX?
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
Ok thanks for that info, and yes i am using OSX
UPDATE: Ok so i was trying to flash in CWM using VMware, but as soon as i got home i tried on my pc it worked perfectly. Im downloading the Rafdroid atm and ill hope for the best.
Ok so after downloading my desired rom, i tried installing from zip on sd card and i get this message from the log report....
-- Installing: /sdcard/full_rafdroid_hd_ext_4r0f2.zip
mtd: successfully wrote block at 0
I:Set boot command "boot-recovery"
Finding update package...
I:Update location: /sdcard/full_rafdroid_hd_ext_4r0f2.zip
Opening update package...
Installing update...
Installation aborted.
mtd: successfully wrote block at 0
I:Set boot command ""
Fixing permissions...
sh: fix_permissions: not found
Done!
Click to expand...
Click to collapse
same thing happened with me the first time I flashed anything,
First, flash a ROM using MAGLDR USB Flasher, or DFT whatever,
Second, you have CWM downloaded, make sure you actually have copied the 'copy to sd root' folder to your SD
next you should be able to flash CWM in USB Flasher mode again, reboot and check your ROM still works.
If it does, then boot to MAGLDR, scroll down to AD Recovery, and install the ROM from .zip
Oh and make sure its actually a HD2 ROM, I tried installing a desire ROM and got a similar error to what you're getting.
I recommend Ultimate Droid 3.1.1!
Sent from my HTC HD2 using XDA Premium App
DKxda said:
same thing happened with me the first time I flashed anything,
First, flash a ROM using MAGLDR USB Flasher, or DFT whatever,
Second, you have CWM downloaded, make sure you actually have copied the 'copy to sd root' folder to your SD
next you should be able to flash CWM in USB Flasher mode again, reboot and check your ROM still works.
If it does, then boot to MAGLDR, scroll down to AD Recovery, and install the ROM from .zip
Oh and make sure its actually a HD2 ROM, I tried installing a desire ROM and got a similar error to what you're getting.
I recommend Ultimate Droid 3.1.1!
Sent from my HTC HD2 using XDA Premium App
Click to expand...
Click to collapse
Thanks for that useful information , ill have to try that rom out. But i figured out what went wrong. Ok so i downloaded the .zip from the apple store, since my phone was useless and i tether it to my comp since i dont have access to high speed land internet but i do get hspda, so anyways when the download finished, safari automatically decompressed it and thats not exactly what i wanted, so i compressed it myself thinking it would be the same thing. Well i re-downloaded the rom today with chrome and that seemed to worked perfectly. The only problem i have now is that idk why my phone is saying out phone storage, when i have the 1024 hd2, and apparently i didnt format my sd card properly so it doesnt see it as internal storage. So now i have to fix that, any more suggestions would be highly appreciated.
If you need to, back up everything from your sd, then use this program called SD Formatter, I think that's it, Google it! And then format to FAT32, mine used to only show 128mb of the 16GB sd, did that and it showed it all, really good program
Sent from my HTC HD2 using XDA Premium App

[Q] NAND flashing Problem JW MIUI 1.5.6

Hi there.
Trying to install [10.May.11]***JW MIUI 1.5.6[Magldr/CLK][en,de,fr,ru...(15)]
I installed everything 3 times. Used the right versions, started DAF.exe in admin-mode and always got displayed the famous error:
Error happen
Read below for more information
Error Description: send partition data failed
Info: .\RSPL\RSPL.cpp (802)
Error Description:
Info: .\RSPL\RSPL.cpp (545)
Googled 2 days now, didn't find a solution but finding this one hint:
flash.cfg seems to be missing
Why isn't it in any MAGLDR113_DAF.rar? Does NEbody have this one? ...or isn't it gererated on my system.
Please help me! I want to go android.
Greets,
Michael
____________________________________
System: W7 Pro
Mobile: HTC HD2
ROM: Tested with energy, tested with HTC, tested with O2
RadioROM: 2.15.50.14 / 2.08 HSPL
Are you getting this message when you are trying to flash MAGLDR or CWM?
I think you are trying to flash MAGLDR but not positive.
Thats right!
I get the right stuff displayed on my mobile "waiting for USB ...USB" and when I start DAF.exe the famous error message appears. There is no flash.cfg file.
Is this one automatically generated?
by the looks its got the files for a CWM install rather than a DAF install
Oh! Really? F...k! Then I need to figure out how to install the CWM way. ...stupid me. Okay... noob.
Thanks!!!
hotgrafx said:
Oh! Really? F...k! Then I need to figure out how to install the CWM way. ...stupid me. Okay... noob.
Thanks!!!
Click to expand...
Click to collapse
not your fault, id say the instructions given are poor, but it does say at the bottom of the first post the CWM partition layout that needed
CWM is simple to install and use

Most of all Custom Roms give me those errors...

I would post the picture here but i'm not allowed the error msg i get is
pkg:data/local/tmp/xxx.apk
Failure [INSTALL_FAILED_INVALID_INSTALL_LOCATION]
it happens on like 50% of my kairosoft games the other 50% goes into same directory but installs sucessfully ....
I tried to install them via Nexus 7 toolkit and direct from internal sd card with file managers (The Nexus 7 Toolkit shows me atleast the error all file managers just tell me can't install) and this problem only happens with Custom Roms on Stock i can install them without any issues..
If anyone got a clue ....

Categories

Resources