Related
So I am wanting to download the Team Whiskey Beta V5 to my vibrant. When I down load the file to my computer do I need to extract all the files first?? or can I load the unzipped file to my sdcard and then go in and install the update.zip?? any help would be greatly appreciated. especially any detailed instructions. It doesn't sound to complicated but Im affraid I will brick my phone.
No put the file on your internal sd card as it is. In ROM Manager click on install ROM from SD scroll down and select the .zip file. After which you will be asked to make a backup and if you want to wipe data, the wipe data part is a tad redundant as most ROMs do that anyway but I check both.
Sent from my SGH-T959 using XDA App
DCrozier28 said:
So I am wanting to download the Team Whiskey Beta V5 to my vibrant. When I down load the file to my computer do I need to extract all the files first?? or can I load the unzipped file to my sdcard and then go in and install the update.zip?? any help would be greatly appreciated. especially any detailed instructions. It doesn't sound to complicated but Im affraid I will brick my phone.
Click to expand...
Click to collapse
Basically what ^^^ said. All roms are designed to be flashed via clockwork recovery. You need to be rooted first, of course. If you're not, you'll never see the clockwork recovery, and only the standard 2e (blue) recovery. Assuming you're rooted, flashing is easy. Reboot into recovery mode from within the clockwork app, watch your phone reload, and choose select from zip. Once you scroll down to it, go ahead and flash it.
Doing it directly from clockwork and choosing the file from wherever you put it tends to hang up my phone. I have more success doing it the manual way I just described.
If all else fails, just click the link in my sig if you get lost.
Thank you. Sorry, another stupid question. How would I get it on to the SD card. Is it just simply plugging in the phone (usb debugging) and drag a drop the file???
DCrozier28 said:
Thank you. Sorry, another stupid question. How would I get it on to the SD card. Is it just simply plugging in the phone (usb debugging) and drag a drop the file???
Click to expand...
Click to collapse
are you talking about the rom file?
you just download the files you want to your computer first (you can do it on your phone but sometimes theres issues doing that)
then plug the phone in by USB and mount to the computer but since this mounts both the internal sd card and the external, make sure you put these files on your internal sd card at the root of it (not in a folder)
DCrozier28 said:
Thank you. Sorry, another stupid question. How would I get it on to the SD card. Is it just simply plugging in the phone (usb debugging) and drag a drop the file???
Click to expand...
Click to collapse
you do need to be rooted to flash the rom, have you done that part yet?
also once your rooted download rom manager from the market and flash clockwork recovery to your phone.
actualy to avoid confusion... heres a step by step:
1 follow the instructions posted here: Root Instructions
4. download your rom from here (I'm asuming by beta 5 you mean obsidian beta 5?: Obsidian Beta 5
5. mount the phone to the computer and put Obsidian on the root of your internal sd card just as it is without unziping or anything (and make sure you dont put the rom on the 2 gig external sd assuming your using the stock one that comes with the phone)
6. unmount from the computer
7. download and install rom manager from the market
8. open rom manager and choose the first option (flash clockworkmod recovery)
make sure and choose the vibrant from the list that pops up. and wait untill it finishes, it may take a few minutes.
9. choose the next option down (reboot into recovery)
once it reboots into recovery, if it looks the same as when you flashed the root file, just hit reinstall packages and it should reboot into clockworkmod recovery.
10. select "choose sip from sd card"
11. select obsidian
12. confirm
13 wait for it to flash
14 reboot using the reboot option in clockwork recovery.
it may take a bit longer than normal to boot up the first time, just be patient.
15. have fun with the new rom
also check out this sticky thread if you havent already: http://forum.xda-developers.com/showthread.php?t=732458
pretty much anything you'll want to know is there, and the guy that wrote it updates it really nicely, its the only sticky thread I've actualy bookmarked
^ very kind, thank you. I'm working on adding videos soon.
Op, if the sticky doesn't answer, check the q&a section. I've STARTED a more noob friendly version. It should be easily found if you search "noob friendly" I imagine.
This is a modified OpenRecovery (Skrilaz_CZ) based on Androidiani Recovery (89luca89&Azhad) with some enhanced features for Milestone XT720.
Features:
Main OR menu streamlined
Most Androidiani menu options have been moved into OR > Other Utilities
Add ext3/4 support (thanks fjfalcon)
Added SD Card Utility (OR > SD Card Utility)
Added preference for display brightness in OR (OR > Settings > Brightness)
Added utility to reinstall orbootstrap (OR > "Other Utilities" > "Re-install orbootstrap")
New sh hijack binary will boot to fastboot bootloader if volume-down is held (OR > "Other Utilities" > "Re-install orbootstrap" to enable). This should be compatible with all ROMs and stock.
nandroid: removed ability to backup partitions that always fail (this means "Backup All" works now)
Fixed OR > "Wipe Dalvik Cache" bugs (previous OR/AOR don't clear them all)
Added OR > "Power Off" (helpful when phone is being stupid about charging)
Minor update to sdcard-info.txt output
XT720 basebands added (OR > Change Basebands)
Please note that although most Androidiani menu options have been included in the Other Utilities menu item, that does *not* mean I have tested them on XT720.
Installation:
Download link: http://www.multiupload.com/J8Q15SHP4S
Root the phone
Download OpenRecovery-XT720-01.zip (it contains /sdcard/OpenRecovery and /sdcard/OpenRecovery.zip)
Extract OpenRecovery-XT720-01.zip onto the SD card. This will create a /sdcard/OpenRecovery directory and an /sdcard/OpenRecovery.zip file.
Make sure you're not in USB access mode and install the bootstrap (using adb or Terminal):
Code:
su
cp /sdcard/OpenRecovery/orbootstrap/install_script.sh /tmp
chmod 755 /tmp/install_script.sh
/tmp/install_script.sh STR
Upgrading from OpenRecovery:
Download link: http://www.multiupload.com/J8Q15SHP4S
Make a nandroid and backup your sdcard
Download OpenRecovery-XT720-01.zip (it contains /sdcard/OpenRecovery and /sdcard/OpenRecovery.zip)
Rename the old /sdcard/OpenRecovery folder to /sdcard/OpenRecovery.bak
Extract OpenRecovery-XT720-01.zip onto the SD card. This will create a new /sdcard/OpenRecovery directory.
Optional: Move/copy all files from /sdcard/OpenRecovery.bak/updates to the new /sdcard/OpenRecovery/updates directory
Optional: Reboot into OR. Select "OR" > "Other Utilities" > "Re-install orbootstrap"
Github: https://github.com/Mioze7Ae/openrecovery_xt720
Thanks: skrilax_cz, 89luca89, Azhad, fjfalcon
Is this the same update that was posted in other topics?
No, it's not the same, its the next version. The biggest difference is this one merges Androidiani (the previous one was based on vanilla OpenRecovery). Maybe I should bold the new stuff.
Sorry about this but what does Reinstalling the Bootstrap mean? Don't we already use that for getting in the bootloader? Is it is it gets broken somehow?
Woodrube said:
Sorry about this but what does Reinstalling the Bootstrap mean? Don't we already use that for getting in the bootloader? Is it is it gets broken somehow?
Click to expand...
Click to collapse
If the bootloader gets broken, you won't be in OpenRecovery
Anyway, I see two reasons to use it. (1) to make 100% sure you can get back to OpenRecovery after you've flashed something experimental (say a Milestone A853 update-based ROM) or (2) you want to upgrade your bootstrap to the new version that lets you hold volume-down to boot directly into the fastboot bootloader. (i.e. in the new version volume-up==OpenRecovery, volume-down==fastboot)
Edit: that reminds me... I should make a version of the bootstrap that fixes volume-down to boot OR on Milestone XT720 running Motoroi 50R...
Mioze7Ae said:
If the bootloader gets broken, you won't be in OpenRecovery
Anyway, I see two reasons to use it. (1) to make 100% sure you can get back to OpenRecovery after you've flashed something experimental (say a Milestone A853 update-based ROM) or (2) you want to upgrade your bootstrap to the new version that lets you hold volume-down to boot directly into the fastboot bootloader. (i.e. in the new version volume-up==OpenRecovery, volume-down==fastboot)
Edit: that reminds me... I should make a version of the bootstrap that fixes volume-down to boot OR on Milestone XT720 running Motoroi 50R...
Click to expand...
Click to collapse
Very very nice... thx man
Ok so I may have run into a glitch. Hopefully it is just mine, but it has been awhile since I had updated many of the apps from the market and let me tell ya, there was a shopping list. Haha get it. Anyways, I updated them all and decided it has also been some time since I had made a backup as well.
So I went in and "tried" to make a backup of the usuals (system, data, cust, cache, cdrom and sd). I probably tried 3 or 4 times and it never backed anything up. I even deleted the openrecovery folder and re-unzipped and replaced it and tried maybe another 3 times. It would just hang on the system dumping part for 15+mins (which is way too long).
I rebooted and put the original MZor back in there (the one w/o all the AOR stuff in it-for reference). Booted into recovery and boom, made the full backup in normal time. I ran checks on sd and sd-ext several times throughout and never a problem.
Has anyone else encountered this? I had been using this since it first came out and some of the utilites and all worked fine, but now that I think of it, hadnt tried to make a back up until last night.
***Side question: Since the beginning when I first learned how to make a backup, I read that you should backup system, data, cust, cache, cdrom and sd(if neccessary). My question is why do we and does it matter if we back up the cust, cache and cdrom parts? Wouldn't these get repopulated anyways at first boot? Would everything work if we just restored system, data and sd (again if neccessary)
Woodrube said:
Ok so I may have run into a glitch. Hopefully it is just mine, but it has been awhile since I had updated many of the apps from the market and let me tell ya, there was a shopping list. Haha get it. Anyways, I updated them all and decided it has also been some time since I had made a backup as well.
So I went in and "tried" to make a backup of the usuals (system, data, cust, cache, cdrom and sd). I probably tried 3 or 4 times and it never backed anything up. I even deleted the openrecovery folder and re-unzipped and replaced it and tried maybe another 3 times. It would just hang on the system dumping part for 15+mins (which is way too long).
I rebooted and put the original MZor back in there (the one w/o all the AOR stuff in it-for reference). Booted into recovery and boom, made the full backup in normal time. I ran checks on sd and sd-ext several times throughout and never a problem.
Has anyone else encountered this? I had been using this since it first came out and some of the utilites and all worked fine, but now that I think of it, hadnt tried to make a back up until last night.
***Side question: Since the beginning when I first learned how to make a backup, I read that you should backup system, data, cust, cache, cdrom and sd(if neccessary). My question is why do we and does it matter if we back up the cust, cache and cdrom parts? Wouldn't these get repopulated anyways at first boot? Would everything work if we just restored system, data and sd (again if neccessary)
Click to expand...
Click to collapse
I don't backup cust or cdrom. I made a backup with Mz's new O.R. yesterday and good thing I backed up ext cause my XDA Special backup would not boot without it. Not much help for ya sorry bud Hope you get it worked out.
@Mioze7Ae
can you please compile a standalone APK installer version of the new open recovery for XT720?
after reading the instructions i noticed, it requires an existing open recovery already installed to apply the above updates
AllGamer said:
@Mioze7Ae
can you please compile a standalone APK installer version of the new open recovery for XT720?
after reading the instructions i noticed, it requires an existing open recovery already installed to apply the above updates
Click to expand...
Click to collapse
I tried but my re-compiled version of the OpenRecovery.apk just FC'd.
Thanks for this Mioze7Ae, this is really sweet!
Am I missing out something here? I don't seem to be able to get the additional OR menu to convert to EXT4. I flashed back to Singapore 2.1 and have rooted. Removed the previous Open Recovery folder but where do I get the OpenRecovery.apk? Do I use back the previous version?
You can use Dexter's OpenRecovery.apk to install Open Recovery & then follow Mioze7Ae's instructions in the OP to update it.
Not sure what effect it even has, but the set timezone seems to be backwards ... Selecting GMT-7 runs /bin/timezone.sh GMT+7 and selecting GMT+7 runs /bin/timezone.sh GMT-7
Hey guys, hope you can provide me with a clearer instruction. I have done exactly as per the instructions and now when I boot into recovery, I don't see the extra option to convert to EXT4. The only things I see in the menu is:
Motorola MILESTONE XT720 Open Recovery
Version 1.46
Created by Skrilax_CZ
Use Volume Up/Down to highlight:
Camera_Mode key to select.
Main Menu
Reboot Menu
Settings
USB Mass Storage Mode
Nandroid
Application Menu
Run Script
Apply Update
Wipe Dalvik Cache
Wipe Data / Factory Reset
Wipe Cache Partition
What am I doing wrong? The phone is still running 2.1 update 1 but it's rooted.
It looks like you're running the original OpenRecovery. You need to replace the OpenRecovery folder on the sdcard with the version from the OpenRecovery-XT720-01.zip.
I think I can see how the instructions about renaming might be confusing so I tweaked the phrasing a little bit.
Thanks for the reply Mioze7Ae but I followed exactly as your instructions. Here's what I've done:
-Flashed singapore_STR_U2_01.1E.0
-Rooted with SuperOneClick
-Extracted and transferred to SD the OpenRecovery folder, OpenRecovery.zip and the original OpenRecovery.apk file.
-Ran OpenRecovery.apk
-Install Recovery System. Install Sucess.
-Recovery Boot and that's where it boots into the old OR.
It's the same if I use the OpenRecovery folder provided by hellmonger in The XT720 XDA Special Final RC2 "Hellmonger Edition"
ranggie4 said:
Thanks for the reply Mioze7Ae but I followed exactly as your instructions. Here's what I've done:
-Flashed singapore_STR_U2_01.1E.0
-Rooted with SuperOneClick
-Extracted and transferred to SD the OpenRecovery folder, OpenRecovery.zip and the original OpenRecovery.apk file.
-Ran OpenRecovery.apk
-Install Recovery System. Install Sucess.
-Recovery Boot and that's where it boots into the old OR.
It's the same if I use the OpenRecovery folder provided by hellmonger in The XT720 XDA Special Final RC2 "Hellmonger Edition"
Click to expand...
Click to collapse
Change this:
Extracted and transferred to SD the OpenRecovery folder, OpenRecovery.zip and the original OpenRecovery.apk file.
Ran OpenRecovery.apk
Install Recovery System. Install Sucess.
To this:
Transferred to SD the the original OpenRecovery.apk file.
Ran OpenRecovery.apk
Install Recovery System. Install Sucess.
Extracted and transferred to SD the new OpenRecovery folder, OpenRecovery.zip
R-D said:
Not sure what effect it even has, but the set timezone seems to be backwards ... Selecting GMT-7 runs /bin/timezone.sh GMT+7 and selecting GMT+7 runs /bin/timezone.sh GMT-7
Click to expand...
Click to collapse
I think it only affects the naming of the nandroid directories, but I'll give it a look. Nice catch!
Thanks Mioze7Ae. The last instruction made it clear. It works now. Thank you so much!!!!!!!!
Mioze7Ae said:
I think it only affects the naming of the nandroid directories, but I'll give it a look. Nice catch!
Click to expand...
Click to collapse
it was like this in all the versions of open recovery...
+++++++++
Mioze, can you also add a wipe battery stats in your modified openrecovery? comes in handy when we flash a new rom or restore a nandroid so we dont have to use the battery calibrating app.
Hey everyone - I figured this might help some folks. It is a CWM installable zip that will restore your system to a completely stock UEKHA (the US retail build for P7310). This includes the stock kernel and recovery image as well.
Heres the instructions:
1) Download this file: http://www.multiupload.com/1KRF1M4CQZ
2) Put the file on your internal storage.
3) Reboot into recovery
4) Execute the Wipe Data/Factory Reset option
5) Choose Install Zip from SD Card
6) Choose Choose Zip from SD Card
7) Select the P7310UEKHA_Restock_v1.zip
8) Sit back, wait about 5 minutes
9) Once the script completes and says "Done", reboot.
10) Welcome to a completely stock US Retail tab
Enjoy.
I just want to ask: Can we flash this on other 8.9s from other regions (namely, an Asian model)?
I'm used to how it is in Maemo where the only differences between firmwares is localization and some preinstalled programs.
Yes you could flash it onto another 8.9 as well, although it should be a P7310 (Wifi only). Just like Maemo, the only differences between regions are localizations and pre-installed apps.
This stock image would not support 3G functionality however, so it would be a bad idea to install it on a P7300.
That's great. Going to flash Clockwork and this once I pick up my P7310 on Tuesday.
Which reminds me - how are Samsung kernels built? I heard that they need to use an initrd (or can the modules be compiled straight into the kernel? or is there a kernel size limitation, which is why an initrd is needed?)
I am truly grateful for this as I rooted and debloated my Tab the very first day lol. This is a great step!
Just flashed my tab with the ROM, works great! Originally had asian ROM on the tab.
Thank you very much! I needed some of the stock original loadable modules after some prior tweaks .
Thanks for the good work!
I was checking the system script used, and I was wondering if this CWM preserve the file/folder permissions as out of the box state or is just 7777 state?
mramirezusa said:
Thanks for the good work!
I was checking the system script used, and I was wondering if this CWM preserve the file/folder permissions as out of the box state or is just 7777 state?
Click to expand...
Click to collapse
Permissions should be out of the box state...the system image was taken from my stock tab directly, and the extract script should leave all permissions in tact.
Hey alterbridge86, it's great to hear you have a GT 8.9 now, that's good news for us
Quick question, how did you dump the ROM and the recovery? I have a GT 8.9 3G from Orange France and I'd like to dump everything before installing CWM to be able to restore to stock if needed.
Thanks! And again, great work!
masterludo said:
Hey alterbridge86, it's great to hear you have a GT 8.9 now, that's good news for us
Quick question, how did you dump the ROM and the recovery? I have a GT 8.9 3G from Orange France and I'd like to dump everything before installing CWM to be able to restore to stock if needed.
Thanks! And again, great work!
Click to expand...
Click to collapse
I ended up dumping it using the CWM I posted in the other thread. The new clockworkmod stores its backups in .tar format, so it makes it really easy to manipulate. Simply create a backup, then if you're feeling adventurous, you can take this flashable zip, replace system.tar and boot.img with the ones created by your backup. The stock recovery is same on all devices, so you can leave the one that is in this package and itwill work for you
Sounds good, thanks I'll give it a try when I have a little more time to play
Hey guys, i did something really stupid today to my 8.9 p7310...I installed that Asia update to it and it placed the tab into a loop and crashes in the settings app when it first starts up. Cant access SD card to install this firmware. I need the Odin firmware to put back to stock I think. Any ideas?
shatty said:
Hey guys, i did something really stupid today to my 8.9 p7310...I installed that Asia update to it and it placed the tab into a loop and crashes in the settings app when it first starts up. Cant access SD card to install this firmware. I need the Odin firmware to put back to stock I think. Any ideas?
Click to expand...
Click to collapse
When you installed the Asian firmware at ODIN, did you remember putting the CSC, PIT, BOOTLOADER to their corresponding places along with the biggest file being at PDA? If you just used the PDA file and not the other files...there's your issue. Once you successfully ODIN, flash this specific CWM Recovery and then you can either choose Stock (this thread) or the Overcome ROM.
Yea just did the pda. The instructions only said the pda. Doesnt matter anyway i am back to stock used adb to load the stock zip to sdcard and loaded
shatty said:
Yea just did the pda. The instructions only said the pda. Doesnt matter anyway i am back to stock used adb to load the stock zip to sdcard and loaded
Click to expand...
Click to collapse
Good to know you made it. The same happened to another user. Those instructions aren't correct.
Sent from my GT-P7310
Help getting China based GT-7310 to US stock
Hello,
I recently bought a GT-7310 in China, and want to get this to stock US using your method. I had a question on step #2.
2) Put the file on your internal storage.
How do I get the file to the internal storage and where is that location? I don't see an /SDCARD folder anywhere when browsing the tab in Windows 7. I have the latest USB drivers installed. I tried to push the file to /SDCARD using ADB but Android SDK tools doesn't recognize my tab. Are there any other ways to get the file to internal storage?
Thanks.
zinzino said:
Hello,
I recently bought a GT-7310 in China, and want to get this to stock US using your method. I had a question on step #2.
2) Put the file on your internal storage.
How do I get the file to the internal storage and where is that location? I don't see an /SDCARD folder anywhere when browsing the tab in Windows 7. I have the latest USB drivers installed. I tried to push the file to /SDCARD using ADB but Android SDK tools doesn't recognize my tab. Are there any other ways to get the file to internal storage?
Thanks.
Click to expand...
Click to collapse
When you plug in the tab, it connects via MTP to Windows. Then you can only get to the internal storage, just drop it in there. You'll see all the default folders (music, videos, etc.) so you'll know your in the right place.
Thank you. I got the file to SD Card, went into recovery, executed the wipe data/factory reset option. After the wipe data/factory reset is complete, I selected the option "apply update from /sdcard". I selected that and I get the following error:
E:error opening /data/media: No such file or directory
Any ideas?
Thanks.
You need to use CWM recovery, not the stock recovery.
WARNING: BEFORE YOU DO ANYTHING PLEASE READ THIS THREAD AND MAKE SURE YOU KNOW WHAT YOU ARE DOING. I AM NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR PHONE.
A few days ago I came across this thread which made me think and try. At the beginning I couldn't flash the zips necessary for making backups without rebooting to recovery .
What you will need:
1.Bootloader unlocked and a rooted phone . If you don't have any of them please read here and here
2.Busybox
3.A root explorer of your choice
4.A terminal emulator app
5.The 2 files from the zip attached
6.Patience
Open your root explorer extract and copy the 2 files attached to /system/bin and set permissions 755( that's rwxr-xr-x).
Reboot your phone.
Open Terminal app and type su to obtain root followed by onandroid.
Sit back and relax while the script backs up your rom.
All thanks go to ameer1234567890 who gave us the Online Nandroid . I only found the thread and also found the method to copy the files to Razr I.
When i'll have some time i'll try to make a flashable zip for the lazy ones
As promised here are the zips for flashing from recovery with update binary working with the Razr I. I have only tested with CWM, but they should work with TWRP as well.
I suppose everyone knows what to do, but just in case someone new tries it:
-copy the 2 zips to you internal storage or external sdcard
-reboot to recovery
-select install zip from sdcard(now choose the location of your files)
-select zip
-install
-reboot
Enjoy
nandroid,etc, assistance
free2live said:
As promised here are the zips for flashing from recovery with update binary working with the Razr I. I have only tested with CWM, but they should work with TWRP as well.
I suppose everyone knows what to do, but just in case someone new tries it:
-copy the 2 zips to you internal storage or external sdcard
-reboot to recovery
-select install zip from sdcard(now choose the location of your files)
-select zip
-install
-reboot
Enjoy
Click to expand...
Click to collapse
Is this the best way to do a " nandroid " - I have been part of this site for quite some time , read numerous sites, but i have a very bad memory problem and that's why i have many text documents setup to the point i am confused. Right now I have an AT&T S4 which has a bad IMEI, so I want to use it as a test phone, but it has been updated to 4.3 -which from what I understand I would need to downgrade back to 4.1.2 order to unlock the phone via the dial pad. I was able to accomplish that one time when I first got a Samsung S4 and did it via the dial pad before the OTA came out for 4.3.
I also own a S3, also AT&T, so i can learn how to to root and unlock and use CWR or TWRP and than learn ROMS. I know I need to make a backup before I do anything, and also constantly reading the " Noob " general forums for both phones. I also am familiar with Samsung Kies, which does a backup but I don't think it's the same as this nandroid i have been reading about.
Thank you or taking out the time and reading my post. I will check back to see if anyone had some time to give me some direction or an answer to my problem with " nandroid" or if someone even could touch up on any subjects I have mentioned. Please don't think I haven't spent hrs of time on YouTube, Google, Howard forums and especially here on XDA.
Schedule Post:
#1 - What Is ClockworkMod Recovery And How To Use It On Android
#2 - Nandroid Backup & Restore
#3 - Onandroid Backup
What Is ClockworkMod Recovery And How To Use It On Android
ClockworkMod – also known as Clockwork or CWM – is a custom recovery for Android phones and tablets that allows you to perform several advanced recovery, restoration, installation and maintenance operations on your Android device that aren’t possible with the stock recovery. In what follows, we will cover all that this recovery is capable of doing, and how to do it. We do not discuss about TWRP (TeamWin Recovery Project) in this thread.
1.All About Android Recovery
All Android devices ship with a recovery console that is basically a partition on the device’s internal memory and can be booted into. The stock recovery of almost all Android devices provides a few basic yet handy options that allow you to factory reset your device and also to recover its operating system using an official ROM in zip format, but that’s all you can do with it. That’s where a custom recovery comes handy.
A custom Android recovery basically replaces the stock recovery with one that lets you do all you can do with the stock recovery, plus a plethora of more options to give you a lot more control on your device. With a custom recovery, you can install official and unofficial ROMs as well as other updates including apps, themes, kernels etc. using zip files, wipe not just user data but pretty much every partition on your device, mount the storage card for USB mass storage access without leaving recovery, partition your SD card, wipe Dalvik cache and battery stats, fix permissions, perform, manage and restore backups and so on.
2.Introduction to ClockworkMod
ClockworkMod recovery is one of the most widely used custom Android recoveries that is available for most mainstream Android devices. It is the needed recovery for AOKP, AOSP, CM. ClockworkMod recovery has been developed by Koushik Dutta (also known as Koush) – the same guy who brought us the Android ROM Manager.
3.Booting into ClockworkMod
On most Android devices including ones by Samsung, you can enter recovery by powering your device off and then powering it back on while keeping either the Volume Up+Home+Power buttons pressed in the same time. This will enter the bootloader from where you can select the ‘RECOVERY’ option by navigating to it with the Volume key and entering it with the ‘Power’ key.
Tour
1. reboot system now
Reboot/restart your phone.
2. apply update from sdcard
This can be used for installation of any official or unofficial update, ROM, kernel, theme etc. That is in a zip format installable from recovery, as long as the file is named update.zip and it has been placed on the root of your SD card (i.e. not in any sub-folder). Selecting this option (and most of the options featured below) will bring up a rather annoying confirmation prompt but this has saved us on multiple occasions from a lot of trouble we would have been into due to accidental key presses. This is what we are talking about:
3. wipe data/factory reset
This option wipes all user data on the device as well as cache. Doing this will leave your phone in the state it was in when you bought it or when any custom ROM was first installed. It will also wipe any sd-ext partition that you might have setup (more on this later).
4. wipe cache partition
Wipes the cache partition of the device to clear all the data accumulated there over use. This is often used before installing a new ROM, app, kernel or any similar mod via recovery.
5. install zip from sdcard
This option brings up the following sub-menu:
a. apply /sdcard/update.zip
This one is essentially the same as the ‘apply update from sdcard’ option of the main menu.
b. choose zip from sdcard
Lets you install any zip file (with any name) from any location on your SD card. The file can be for a ROM, a kernel, an application, a theme or any mod as long as it is in recovery-flashable zip format. This is the most widely used option for installing a ROM that you have downloaded and copied to your SD card.
c. toggle signature verification
Turns the signature verification on and off. When signature verification is on, you will not be able to install any custom ROMs that haven’t been signed by the developers (most custom ROMs aren’t signed). Switching it off skips the signature verification check and proceeds with the installation.
d. toggle script asserts
Seldom-used option for a vast majority of users. It simply turns script asserts on or off. If you don’t know about these (we don’t), it’s best not to change this option.
e. +++++Go Back+++++
Takes you back to the main recovery menu, obviously!
6. backup and restore
Undoubtedly one of the most important features provided by a custom recovery, the backup and restore feature – also known as Nandroid backup – allows you to take a snapshot of your phone’s entire internal memory including all partitions, and save it on the SD card.
a. Backup
Takes a Nandroid backup, as explained above.
b. Restore
Lets you restore a previously taken backup. Entering this option presents you with a list of existing backups from the SD card that you can choose from for restoration.
c. Advanced Restore
This option is similar to the Restore option but once a backup has been selected to be restored, this option allows you to choose what parts of it to restore. You can choose to restore the boot, system, data, cache and sd-ext partitions.
7. mounts and storage
Allows you to perform maintenance tasks on all the internal and external partitions of your android device
a. mount/unmount /system, /data, /cache, /sdcard or /sd-ext
These options let you toggle between mounting or unmounting these respective partitions. Most users don’t need to change these options.
b. format boot, system, data, cache, sdcard or sd-ext
These let you directly format any of these partitions. Take extreme care with this option as formatting any of these partitions will result in losing all data on them, especially the boot and system partitions. Formatting the system partition will remove your ROM and leave your phone without an operating system while wiping the boot partition may brick your phone unless you restore or flash another one before rebooting your device.
c. mount USB storage
Lets you enable USB mass storage mode for your SD card right from recovery so that you can connect it to your computer via USB and transfer any files to/from it without having to leave recovery.
8. advanced
This section contains a few options most users will not require, though these can come handy quite often, especially wiping Dalvik cache, which is required before most ROM installations.
1. Reboot Recovery
Lets you directly and very conveniently reboot from recovery right back into recovery. This is useful option for certain back-to-back installations that require the device to at least boot once between them.
2. Wipe Dalvik Cache
Allows you to wipe the cache for the Dalvik virtual machine (the custom-built Java virtual machine for Android).This is required before most ROM installations and at other occasions too, for fixing some problems.
3. Wipe Battery Stats
Wipes the saved battery usage statistics and effectively recalibrates the battery. Useful in various scenarios when Android isn’t showing correct battery levels.
4. Report Error
In case of errors, this feature can be used to save a log of recent ClockworkMod recovery operations on the SD card that you can later report from Android using ROM Manager.
5. Key Test
Lets you press any of the hardware keys to see if they are properly functioning, and to see their key codes.
6. Partition SD Card
This option gives you a no-frills way to partition your SD card properly for use with ROMs that support data2ext (a very handy hack for low internal memory devices that enables an /sd-ext partition on the SD card to be used as the internal user data storage i.e. as the /data partition). Once this option is selected, you will be given options to choose the sizes for the /sd-ext partition as well as an optional /swap partition on the SD card, and will then automatically format it for you, leaving the remaining space for normal SD card usage. This option will wipe all data from your SD card so use it with caution!
7. Fix Permissions
Fixes the file permissions for the internal memory partitions back to default. This is very useful as a fix for several errors and Force-Closes that start appearing after you or an application you installed and provided root access end up messing up the permissions of important files.
4.Using ClockworkMod for ROM, kernel, apps, theme or mod installation
While in the complete feature tour we have already shown you how to install a ROM, kernel, app, theme or any similar mod from a recovery-flashable zip file using the recovery options, those of you who jumped straight to this section expecting to get just this information quickly are at the right place!
This guide is primary focused on a full feature tour of CWM but in our previously written guide on how to flash a ROM or app from a zip to an Android device file from recovery, we have already covered in detail how to use ClockworkMod for installing any ROM, kernel, app, theme or mod using a recovery-flashable zip file. While that guide is based on an older version of ClockworkMod recovery, everything in it still applies to the latest versions and should work flawlessly.
5.How To Install A ROM or App from zip file to Android device from recovery
Please note that the terms ‘installing’ and ‘flashing’ can be used interchangeably here and will mean the same thing.
Rooting your device renders its warranty void.
ALWAYS take backups before rooting or flashing a custom ROM or app to your phone.
Flashing a defective ROM or app to your phone might brick it so choose the ROMs and software that you flash wisely and never install a ROM or application from an untrusted source.
AddictiveTips will not be liable if your device gets damaged or bricked during the process.
Official ROM updates from device manufacturers or carriers are released in conveniently packaged installation files that you can run on your computer while your Android device is connected to it, and they automatically take care of updating your phone’s system. Similarly, most applications are available directly in the Android Market for easy installation, or come packaged as convenient ‘.apk’ files that you can just run on your Android phone to install. The case is not the same with most custom ROMs and several custom applications, which come in .zip files rather than PC installers or .apk files.
The idea of installing a customized operating system to their smartphone can be quite intimidating for inexperienced users. Though once they get used to it, some of them end up trying out different ROMs for their devices several times a day. While I don’t exactly recommend that you flash every new ROM that is made available for your Android phone, we are here to help you get over the fear of flashing a ROM that enhances the capabilities of your device so that you can use it to its fullest potential.
Here is a quick look at what we will be covering in this guide. Feel free to skip to the real deal if you already meet the prerequisites.
• Before We Begin: Battery Check
• Before We Begin: Unlocking the Bootloader (Stock Android Devices Only)
• Before We Begin: Rooting
• Before We Proceed: Installing a Custom Recovery
• The Real Deal: Installing a Custom ROM to your Phone
• The Real Deal: Installing an App From a Zip File to your Phone
There are certain steps that you might not require, and we shall be mentioning them in each section.
Before We Begin: Battery Check
Before you proceed with any of the following steps, make sure your phone’s battery level is not too low. It is recommended to have it at 50% or more. Do NOT take this lightly. If your phone’s battery runs out while you are attempting to flash a custom ROM, there is a significant chance of your phone getting bricked and becoming unusable PERMANENTLY.
Before We Begin:Unlocking the Bootloader (Stock Android Devices Only)
Note: This step applies only to Android devices with stock version of Android installed. At the moment, Google Nexus One and Nexus S are the only two such devices available. You may skip this step if you are using any other Android device.
Users of stock Android devices such as the Google Nexus One or Nexus S also need to unlock its bootloader before they can proceed. Once you have done this, you may proceed to the next step.
Before We Begin: Rooting
Note: You may skip this step if your device is already rooted, or if you already know how to root it.
Before you can install a custom ROM to your device, your phone needs to be rooted. Rooting is basically administrator or root level access required to perform administrative tasks on your Android device. Once you are done with the rooting process, you may proceed to the next step.
Before We Proceed: Installing A Custom Recovery
Note: You may skip this step if you already have a custom recovery installed on your device.
Rooting grants you the necessary access level to execute administrative tasks on your Android device but it is the recovery that provides the tools necessary to actually perform those tasks. While every Android device ships with a recovery, the stock recovery is quite limited in what it lets you do, and you need a custom recovery image to perform advanced operations on your device. Once you have a custom recovery installed on your phone, you will be ready to proceed to the next step.
The Real Deal: Installing a Custom ROM to your Phone
Now that you have a custom recovery installed on your phone, you can perform all sorts of wonderful advanced operations on your device and this includes the ability to flash a ROM or application from a zip file. The procedure is pretty standard for most ROMs, though there are certain ROMs which require additional steps for their installation. Since those steps differ from ROM to ROM, pay attention to instructions and this includes only the standard instructions here.
• Manually
1. Download the ROM from the link given in the article featuring that ROM. It should be a zip file.
2. Connect your phone to your computer via USB and mount its storage card.
3. Copy the downloaded ROM to the root of the storage card.
4. Power your phone off and reboot it into recovery. This will involve using a combination of your device’s hardware keys. Once in recovery, you can navigate its menu using the volume up and volume down hardware keys or your phone’s trackball / optical track pad if it comes equipped with one.
5. Use the ‘backup and restore’ feature of recovery to backup your existing ROM installation, software and data. This step is known as performing a nandroid backup. ALWAYS perform a backup before flashing a custom ROM, UNLESS you can afford to lose everything that’s on your phone at the moment.
Note: ALWAYS choose to perform the following steps 6, 7 and 8 UNLESS the ROM you are attempting to flash is an updated version of the same ROM that you are currently using, and is compatible with the current installation’s data. It is usually mentioned with the update whether you can install it over a previous version without wiping its data or not.
6. Get back to the main recovery menu and use the option ‘wipe data/factory reset’. You will be prompted to confirm this action. Select “Yes – Delete all user data”.
7. From the main recovery menu, select ‘wipe cache partition’. You will be prompted to confirm this action. Select ‘Yes – Wipe Cache’.
8. From the main recovery menu, enter the ‘advanced’ menu. From this menu, select ‘Wipe Dalvik Cache’. You will be prompted to confirm this action. Select ‘Yes – Format/System’.
9. From the main recovery menu, enter the ‘Mounts and Storage’ menu. From this menu, select ‘Format/System’. You will be prompted to confirm this action. Select ‘Yes – Wipe Dalvik Cache’.
10. Go back to the main recovery menu by pressing the back button and select the ‘Install zip from SD card’ option.
11. Select ‘choose zip from sdcard’ to get a list of the files and folders on your SD card. Scroll to the ROM’s file that you copied there in step 3, and select it. You will be prompted to confirm this action. Select ‘Yes – Install file_name.zip’ where file_name.zip is the name of the zip file that you are trying to install.
12. Wait patiently while the ROM is flashed to your phone via recovery.
13. Once the installation is complete, head back to the main recovery menu if you aren’t there, and select ‘reboot system now’. Your phone will now boot into the newly installed ROM.
The Real Deal: Installing an App From a Zip File to your Phone
While most apps for Android devices are available at the app store for direct download and installation or as .apk files for direct installation, there are certain apps which are only available as zip files installable from recovery. Their installation procedure is the same as installing a custom ROM that we just featured above. However, there are a few minute differences.
• When installing an app from a zip file, you do NOT need to perform the ‘wipe data/factory reset’ or ‘wipe/system’ step so NEVER do that unless you know what you are doing, have a complete backup and want to start using your ROM as a fresh installation with the new app added.
• You might or might not need to wipe the cache and the dalvik cache for installing apps from zip file. This varies from app to app and the developers of such apps as well as many reviewers including us mention when featuring an app whether it requires a cache and dalvik cache wipe or not. However, it never hurts to wipe these caches anyway, and it does not effect the data on your device or its storage card.
There you go, this concludes the guide on how to flash a ROM or app from a zip file to your Android device using a custom recovery. To try out the skills that you just learned, search our site for custom ROMs for your phone and start flashing, always remembering to take backups first!
Important note: This guide is retrieved from the VeNum Complete Guide with only few additions and corrections by me, so All thanks should go to him!
PS: If you see any error, please contact me to edit the OP.
Nandroid Backup - CWM
What is a Nandroid Backup?
It is a full backup of the partitions on your device’s NAND flash (NAND actually stands for NOT AND, which in simple terms means an electronic gate). Basically a backup of your phones hard drive if you will...
The Nandroid Backup is a snapshot of your device (it means everything on your phone – your apps, data, your current ROM and even the kernel is backed up) at the time you do the back up. If you restore the back up, it changes your phone BACK to that state. You will need custom recovery (CWM/TWRP). So make sure you have CWM or TWRP on your device.
The SD Card data is not backed up in the process. Although, the Nandroid Backup itself is created on your SD card. Make sure you have enough space on your SD card to make a COMPLETE copy of your phone.
It’s highly recommended that once you have done a backup, you manually copy it to your computer in case your sd card is wiped or corrupted.
Pre-requisites:
1. Rooted Device:
2. Custom Recovery (CWM or TWRP)
While the OS is running you cannot do a backup. The bootloader in the recovery enables you to take a backup of the OS while it’s not running.
How to Make a Nandroid Backup via CWM:
Backup via CWM:
1.Boot into Recovery pressing in the same time Volume Up + Home + Power buttons for our Galaxy S4 mini LTE/3G phones
2. Select ‘Backup and Restore’ from the recovery.
Once you are in recovery, scroll down to the option ‘Backup and Recovery’ with volume Up/Down and select it (Power button for select).
3. Start the backup.
Once you are on the Nandroid screen, select ‘Backup’ to start the backup process. You have the option to ‘Restore’ backup on the same screen.
The backup process may take a while. Take a break for a coffee.
4. Transfer the backup to your computer (recommended).
Once you reboot, you can see the backup in the ‘clockworkmod/backup/…’ (or similar file) directory on your SD card.
Move, copy, or paste this folder on your PC safely.
Restore from a Nandroid Backup via CWM:
1. Boot your device into CWM and navigate to the Nandroid screen.
2. Choose ‘Restore’ and begin the process.
If you select ‘Advanced Restore’ option, you may select which part of the backup to restore – i. e. the boot,system, data or cache. Or choose the whole backup.
3. Reboot your device. Your system is now restored and is exactly the same as the time when the backup was taken.
Video guide (ignore phones from videos ) :
CWM guide
TWRP guide
[app] Online Nandroid Backup
Online Nandroid Backup - FULLY SUPPORTED with our Samsung S4 mini GT I9195/I9190/I9192
Online Nandroid - Supported Devices
Nandroid backups are usually performed in recovery mode. This means you would have to turn off your phone and reboot in recovery mode, which wastes a whole lot of time rebooting and a lot more time offline. With this tool you can do nandroid backups without switching off your device.
Requirements:
1. Rooted android phone
2. A terminal emulator installed on phone
3. Latest version of Busybox
4. A working CWM or TWRP
5. Patience
Features:
* Creates backups in the CMW 5 and 6 style or TWRP!
* Full support of the onandroid script.
* Create custom names for your backups.
* Choose what partitions get backed up.
Important: This tool requires a rooted phone with busybox to work!
Download from market: https://play.google.com/store/apps/details?id=com.h3r3t1c.onnandbup
Or from original thread: http://forum.xda-developers.com/showthread.php?t=1620255
Reserved, for future.
I will complete with more info's and screenshots in few days.
Please, keep thread clean and don't post "Thanks".
Regards
I assume this guide was written for nexus devices because the nexus one and nexus s are mentionend and you wrote that the bootloader has to be unlocked (Which has to be done on most devices. Only Samsung(?) has unlocked bootloaders. You could add that unlocking wipes user data.)
The second thing is: Your phone doesnt have to be rooted to install a custom recovey. Either you flash a recovery with Odin (add this aswell) and wipe everything to install a custom rom or you the superuser app to root your stock firmware.
But excuse me if you weren't finished with the post
Did you read carrefully OP and the note from the end?
Important note: This guide is retrieved from the VeNum Complete Guide with only few additions and corrections by me, so All thanks should go to him!
Click to expand...
Click to collapse
Excellent guide, thank you!
R_a_z_v_a_n said:
Online Nandroid Backup - FULLY SUPPORTED with our Samsung S Advance GT I9070 (Janice)
Click to expand...
Click to collapse
Are you saying that the onandroid Partition Script for I9070 works perfectly fine with S4 Mini i9195?
impactor said:
Are you saying that the onandroid Partition Script for I9070 works perfectly fine with S4 Mini i9195?
Click to expand...
Click to collapse
Yep its fully supported, that post its copy/paste from my previous phone/thread. :highfive:
Edited my post, thanks for report.
Check here compatibilities:
Online Nandroid - Supported Devices
Nice really great information Thanks again:good: