bluetooth problems fixed - Galaxy Tab General

my gtab was never able to pair with my 3 differeny bluetooth headsets. flahsed 1.4 euro kernel and loaded modoco rom, now they all pair and work perfectly.

gophet said:
my gtab was never able to pair with my 3 differeny bluetooth headsets. flahsed 1.4 euro kernel and loaded modoco rom, now they all pair and work perfectly.
Click to expand...
Click to collapse
Did you try to do a basic factory reset after the original flash?
I loaded modaco and my tab wouldnt work with bluetooth. Once i did the reset bluetooth worked fine.
Glad to see you got your bluetooth working.
Sent from my GT-P1000 using XDA App

Related

Which froyo roms have Bluetooth HID support?

Hi,
I have an US AT&T galaxy tab, flashed for voice and data with P1000XXJK5 (from the following post: http://forum.xda-developers.com/showthread.php?t=847273)
With the stock 2.2 froyo rom, I was able to use my HID keyboard, now with this european rom, the same keyboard will pair, but no longer connect. Besides the voice and data functions, I don't really have a need for much more modifications.
What would be the most direct way to regain BT HID support?
Thanks in advance
Flash Roto-JMEv4. It has HID support (works great with my ThinkOutside keyboard).
Jj3 should but its old
Sent from my GT-P1000 using XDA App
Thanks for the info regarding the roms. I may try that soon when my GT isn't my primary phone. I was somewhat reluctant to flash again, but I got lucky. While I was figuring out my CSC setting, I realized I was set to KOR. So I switched over to CPN (as suggested by others) and seems like I was factory reset to the current rom. This fixed my BT issue.
Sent from my GT-P1000 using XDA App

[Q] Bluetooth receiving problem, CM 7.0.3 (stable)

hello there,
i rooted my wildfire a few days back & flashed CM 7.0.3 stable mod and now im experiencing bluetooth receiving problems.
i tried sending a file (.jpg here) from another phone to my wildfire, but i could not, even though the devices are paired. i CAN send files to the other phone & blutooth file share app is also working. i can log into other device & get the filed copied. but i expect to receive b/t files with out such fuzz.
hope u guys can help me out!
cheers
Try flashing the latest radio as seen here
Be careful though, make sure your phone is fully charged and nothing interrupts the process, as you are flashing a very critical component of your phone. Cyanogenmod 7 had be known to cause gps/wifi/bt problems with our model and flashing the latest radio (even if you have the same version already) solves it most of the time.
Hope that helps
ArbiterGR said:
Try flashing the latest radio as seen here
Be careful though, make sure your phone is fully charged and nothing interrupts the process, as you are flashing a very critical component of your phone. Cyanogenmod 7 had be known to cause gps/wifi/bt problems with our model and flashing the latest radio (even if you have the same version already) solves it most of the time.
Hope that helps
Click to expand...
Click to collapse
i once had a GPS issue.. so i flashed th radio & GPS is now working...
i will try this nevertheless...
But has it cured the Bluetooth issue tho
Sent from my Desire S using XDA Premium App
chubby65 said:
But has it cured the Bluetooth issue tho
Sent from my Desire S using XDA Premium App
Click to expand...
Click to collapse
no its still thr..

Wifi Trouble after flashing to the official ICS

Hello guys , i flashed the official ICS austrian build XXLQ1 over HC 3.2 for my p6800 its working fine but i cant connect to my home network as it shows my wifi network not in range .. i managed to connect to my network after several reboots but it still disconnects and i wont be able to join the wifi network again .
I hope someone can tell me what is going ON !
60 views and NO HELP ..
Come on guys , i did look all over the forums for this issue and tried all the solutions but still my wifi isnt working properly !
Go market find wifi relate think can ^^
Sent from my GT-P6800 using xda premium
I had the same problem. Did you use cwm. If yes then that is the problem. Dont use that. Mine is working fine after i just flashed with mobileodin
Sent from my GT-P6800 using XDA Premium HD app
No i didnt use CWM , i used ODIN PC
u must install XXLQ2 to solve your problem
s0r0sh said:
u must install XXLQ2 to solve your problem
Click to expand...
Click to collapse
No really. I do have the same problem. I've tried installing different roms, different methods but still the same problem. I think its a problem with the WiFi driver Samsung has created for ICS/JB
i did install XXLQ2 but wifi still not working !!!
georgesadam said:
i did install XXLQ2 but wifi still not working !!!
Click to expand...
Click to collapse
i have flashed the official rom but my device disconnect automatically after about every few minutes but able to reconnect!
yes same here but you will be lucky if u can reconnect sometimes u have to reboot to make it work again !
Still no solution , hope someone finds a way to fix this
I have the same problem after installing with PC ODIN.
I flashed back to HC and back to ICS Hong Kong version and it's still resetting Wifi every 10 secs.
I've now installed Wifi Fixer from Play Store and it is resets it faster and holds the connection longer.
Although it still persists Wifi Fixer seems to improve it to the point where it's bare able.
Get Wi-Fi fixer from Play store. I did, and it works magic!
Sent from my GT-N7000 using xda app-developers app
Update;
Well, Wifi Fixer only seemed to work for a few routers.
The one at home worked well but my router at work just wouldn't hold the connection.
I was about to give up and go back to HC.
I thought I'd give the new Austrian build a chance LQ2.
Since changing I noticed better Wifi signal for starters and no drop off like the Hong Kong version.
They Wifi seems fixed on the LQ2 build, it's working very well so far.

Bluetooth borked

I'll try to keep this brief, but backstory is necessary.
Original Nexus 4 came in, bluetooth often would refuse to connect to paired devices without rebooting the phone (or power-cycling the other device oddly). This was on stock. Flashed AOKP milestone 2 at some point and problem persisted.
Original Nexus 4 data port broke, RMAed and got a new one (now with nipples!). Flashed the same AOKP milestone and whoa, bluetooth works wonderfully now. Always connects immediately, amazing!
Fast forward to yesterday, I flash the new AOKP 4.3 build along with a new radio at a knowledgable user's suggestions (filename radio-mako-m9615a-cefwmazm-2.0.1700.84.zip). I'm right back to where I started with bluetooth refusing to connect half the time. Now I KNOW it's not a hardware issue because it worked on this new Nexus until yesterday.
Is this a kernel issue or could it be the radio? Recommendations on what to flash to get my bluetooth working again?
Headcase_Fargone said:
I'll try to keep this brief, but backstory is necessary.
Original Nexus 4 came in, bluetooth often would refuse to connect to paired devices without rebooting the phone (or power-cycling the other device oddly). This was on stock. Flashed AOKP milestone 2 at some point and problem persisted.
Original Nexus 4 data port broke, RMAed and got a new one (now with nipples!). Flashed the same AOKP milestone and whoa, bluetooth works wonderfully now. Always connects immediately, amazing!
Fast forward to yesterday, I flash the new AOKP 4.3 build along with a new radio at a knowledgable user's suggestions (filename radio-mako-m9615a-cefwmazm-2.0.1700.84.zip). I'm right back to where I started with bluetooth refusing to connect half the time. Now I KNOW it's not a hardware issue because it worked on this new Nexus until yesterday.
Is this a kernel issue or could it be the radio? Recommendations on what to flash to get my bluetooth working again?
Click to expand...
Click to collapse
Try reflashing the ROM with a data wipe. If the problem persists, then it's either a ROM issue, or your bluetooth chip is malfunctioning again (Which is improbable).
I was hoping perhaps someone would say "Oh that sounds like a radio issue. Just flash this one and you should be good."
Oh well, I guess I'll put up with it for now and do a factory wipe when AOKP releases a milestone 4.3 or something.
Headcase_Fargone said:
I was hoping perhaps someone would say "Oh that sounds like a radio issue. Just flash this one and you should be good."
Oh well, I guess I'll put up with it for now and do a factory wipe when AOKP releases a milestone 4.3 or something.
Click to expand...
Click to collapse
Bugs in nightly builds are very common. If you want to be sure, flash the stock rooted ROM, and check if the problem is a hardware one.
And yeah, the radio is most probably not causing any problems, since most of us use the latest one with no problems.
abaaaabbbb63 said:
Bugs in nightly builds are very common. If you want to be sure, flash the stock rooted ROM, and check if the problem is a hardware one.
And yeah, the radio is most probably not causing any problems, since most of us use the latest one with no problems.
Click to expand...
Click to collapse
I was actually having this same problem with stock 4.2.2, CM10.1, and AOKP Milestone2 on the first phone. Didn't have the problem with AOKP Milestone2 on the new phone, but am now with the new 4.3 preview build. Really frustrating. Oh well, I'll keep flashing clean until it works. Thanks.

4.3. to 4.2.2 downgrade

Just downgraded from 4.3 to 4.2.2 and I have got rid of the bluetooth problems I was having.. I.e. Could not use my handsfree system in my car... Proving that Sony / Google completely screwed up the.bluetooth stack... Muppets.. Have either of them ever heard of regression testing?
It would appear not!!!!!!
nalab1 said:
Just downgraded from 4.3 to 4.2.2 and I have got rid of the bluetooth problems I was having.. I.e. Could not use my handsfree system in my car... Proving that Sony / Google completely screwed up the.bluetooth stack... Muppets.. Have either of them ever heard of regression testing?
It would appear not!!!!!!
Click to expand...
Click to collapse
how hard is it to downgrade back to 4.2.2 from 4.3? I'm running stock no root.
I'm having bad problems with Bluetooth and memory leak issues.
ssj_jaypee said:
how hard is it to downgrade back to 4.2.2 from 4.3? I'm running stock no root.
I'm having bad problems with Bluetooth and memory leak issues.
Click to expand...
Click to collapse
It's not hard.
But if go to 257 and then to 534 if you don't want to use 257 or want to root 257.
If you go 534 from 290 you'll lose IMEI
Sent from my C6903 using Tapatalk
nalab1 said:
Just downgraded from 4.3 to 4.2.2 and I have got rid of the bluetooth problems I was having.
Click to expand...
Click to collapse
Thanks for posting up about it. Until now, I hadn't heard of anyone actually trying the downgrade to confirm it fixes the problem. Would you be willing to contact Sony directly about it to make sure they know about it? We know two firmwares since 290 have been certified, but they haven't been released and we don't know the changes. It would suck for Sony to push new firmware and not fix this.
ssj_jaypee said:
how hard is it to downgrade back to 4.2.2 from 4.3? I'm running stock no root.
I'm having bad problems with Bluetooth and memory leak issues.
Click to expand...
Click to collapse
It's not hard - just get a copy of the FTF you want from the mega-thread and a copy of flashtool. There are tutorials on how to flash if you can't figure it out. However, since you're downgrading, you'll lose all your data (you must wipe data, or 257 won't boot).
I just went from 290 to 257.. Just copied everything I wanted from my phone to my pc, did the flash then a factory reset and then copied everything back.. Bit of a chore as I had to restore all of my apps etc but worth it to get the handsfree working again.. Still can't believe that Sony and or Google have screwed the bluetooth up so much.. I hate apple but they seen to make it work across their devices and various versions of ios...
not only the bluetooth, the whole fw is acting out.. slowing down, ram is filling too fast and apps don't remain in memory...
also my wifi seems less stable, on .257 the bars "seemed" lower but i was connected at all times, now i have 3 bars, but connection drops all the time...
Try different 290 fw - you can flash other regions as well.
My bluetooth us working great, wifi is better and all apps and features is working without any problems.
Try generic or something similar - that's not gereral problem.
Sent from my C6903 using Tapatalk
funky0308 said:
Try different 290 fw - you can flash other regions as well.
My bluetooth us working great, wifi is better and all apps and features is working without any problems.
Try generic or something similar - that's not gereral problem.
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
When you say your bluetooth is working great - does it connect to your car audio and let you make hands-free calls?

Categories

Resources