ok i've done a bit of searching and i'm pretty sure its software related.
i got an mda pro from when i booted the phone up its had a o2 splash screen, so im assuming its had its software updated. so the phone works fine for about 6 hours or so but then it starts tt freeze up, propgrams stop responding and the phone wont do any thing. i left the phone like this for a few moments then i got a txt and the phone seamed to be working fine untill i went to use the camera and i got "the file camera cannot be opened. either it is not signed with a trusted cert or one of its components can not be found you might need to reinstall or restore this file".
ok so i had a look and found the Available Universal Versions and Upgrades
the thing is i'm not sure which is the best to use or how to do it.
what would you guys recomend i do ?
thanks
MDA Pro with O2 Rom?
Seems so that there is other Rom on it. Normally, this is not a Problem, but who knows, what was changed in this Rom.
I would recommend to download new Rom and install this.
Try http://www.my-xda.com/xdaexec_soft.html
Thats got the latest XDA update.... give it a go and then get the new 1.09.00 radio update too...
Hopefully that will sort you out!
chears i'll give that one a go and see what happpens. fingers crossed
ok so i downloaded the Xda Exec ROM v 1.13.188 from the above site followed the directions in the pdf file, connected the phone and made sure there arnt any programs running in the backgroung. when i try to runn the application to do the upgrade it says its trying to connect to the phone then gives
"error 201: get device data error
can not get device data
please make sure device is connected and run this update utility again"
only problem is that it is connected or so ms active sync says.
any ideas whats goign on or is there another way to update the software ?
thanks guys its apreciated
ok so i managed to get past that stage but
now i get
error 102 ce image file check sum error
the rom image file to be used for the update is corroupt. please download the correct device software update utility and try again.
i have no idea what that means any sugestions ?
@cusaeng, can't help with the ROM update but your initial problem of problems after 6 hours is typical of the Universal when its running low on RAM. Use an app like GSPMaigc+ which can really close processes and reboot once a day (obviously once you solve the ROM issue).
chears i'll look in to that program once i get the rom issues sorted
i've trued downloading a version of the jas jar rom and that give the same error message about being unable to get device information.
when i flashed phones befor eg a motorola a1000 you had to get the phone in to bootloader mode then use a progran to flash it is it a simaler process with the mda ?
i really dont know if i'm doing anything wrong or not
Hey all,
Not new to electronics, but am very new to the Mogul and PDA/Pocket PC flashing..
My new Qwest Mogul will arrive tomorrow and, from what I've read, GPS is not enabled out of the box.. I've been reading that I can re-flash the device to somehow enable the internal GPS chip for use with my TomTom Navigator 6 s/w, but can't figure out how exactly to do it, and I don't want to jump into it and brick my new Mogul.
Right now I've got DCD_3.0.1_Qwest.exe which I picked up here (thanks, by the way!) but I'm not sure what to do with it, and (maybe I'm blind, but..) I can't seem to find a tutorial on how to use it with my Qwest Mogul..
If possible, could someone guide me through the steps on getting my Mogul setup so I can use get this GPS chip enabled?
Also, will I be losing any functionality re-flashing my Mogul? Will it 'look' any different?
Again, sorry if I sound like an idiot to you guys.. but I'd like to learn how to do this so I can quit bugging everyone about it haha
TIA,
-mak
http://forum.xda-developers.com/showthread.php?t=376150
should have what you need to know.
Basically:
Run the 2.4 unlocker
Run the official ROM w/ Radio
Flash the dcd_qwest ROM
Thank you very much!
So the instructions you've posted will, in fact, work for the Qwest Mogul to unlock/enable GPS Navigation?
-mak
EDIT:
Also, there are some things in that list of 'Removed' items that I would like to keep, such as; Entertainment (Games), Adobe Reader, etc.. I'm assuming the reader can be downloaded from Adobe, but how do I go about getting the games back?
I've now got the following, please let me know if it's everything I need, and what exactly each item is;
DCD_3.0.1_Qwest.exe
dcd_titan_kitchen_3.0.1.rar
titan_SPL_2.40-olipro.exe
As for the radio, it says it's included with the official Sprint ROM, do I use the Sprint ROM on my Qwest Mogul???
Please test it first
Just a recomendation here, but just in case you get a defective one you might want to not touch the ROM for a few days and put it thru the paces. If you get a bad one it is always best to know before messing with it. Afterwards, the 3.01 is a good ROM, but a bit tricky even for the experienced because things are not quite ironed out with the radio and serveral experienced people have injured their units, so I would recomend 'cutting your teeth' on 2.3.2, as it worked really well for me and is pretty cut and dried and the process is stable. In order to get the apps you want like acrobat and games you can use the kitchen and get them in there.
You also won't need the kitchen (i'd worry about that later, to be honest, not good to "cut your teeth" with a kitchen).
You do need the offical sprint ROM, since it includes the radio.
If i recall correctly from when i flashed my friend's qwest 6800, I did this:
olipro's 2.40
Offical sprint rom [when the customizations come up (ie. tap screen to begin), i flashed the DCD 3.0.1 qwest rom.
But it's been a few days so i'd search around here and on ppcgeeks to double check.
As madman said, however, I'd put the phone through the paces for a few days to make sure all is well. Run some benchmarks and such to put a strain on it. If you flash and figure out you have a bad phone...well, you're out however much you paid for it.
Good luck and welcome to the fun
Thanks guys, I think I understand now
I'll keep my Mogul stock for a bit to make sure everything is good, but Qwest offers an exchange for the phone if it's defective, and I have handset insurance in case it gets 'lost'.. so I'll be covered for the future there.
So am I correct to assume I should do the following;
Install titan_SPL_2.40-olipro.exe
Then install Official Sprint ROM w/ Radio (where can I get that, or do I already have it??)
Then, during customizations, shut the phone down and install DCD_3.0.1_Qwest.exe, or an older version that might be less buggy?
If I do the above, it will unlock GPS on my phone? ..in the end, other than some applications, will I lose any functionality (e.g; Text Messaging, WiFi, etc)?
Thanks again,
-mak
http://download.america.htc.com/RUU_...CS_AM_Ship.exe
that should do it
shouldnt lose any functionality, make sure you write down all the information and such about msid, mdn, etc. Should be a post in here about that somewhere, I can find it for you on here for ppcgeeks if you need.
edit: it was in ppcgeeks:
http://forum.ppcgeeks.com/showthread.php?t=17667
The link provided is broken, is this the correct file; ftp://Mogulrom:[email protected]_RS_TITAN_3.35.04_4350H_SPCS_AM_Ship.exe
Here I go...
After reading this thread, I've decided to take the plunge and attempt the upgrade to my Qwest Mogul. Just to verify, I do the following:
Use Olipro 2.4
Flash to Sprint Upgrade
Flash to the DCD 3.0.1
Are there any codes or other information that I am going to need to write down before I start the procedure?
@ mak: yes, that's the right one, sorry, didnt check my links :/
@ reddhanky: read the PPCgeeks thread, dont forget to get the getspc program for your epst unlock code.
Psionfenix said:
http://download.america.htc.com/RUU_...CS_AM_Ship.exe
that should do it
shouldnt lose any functionality, make sure you write down all the information and such about msid, mdn, etc. Should be a post in here about that somewhere, I can find it for you on here for ppcgeeks if you need.
edit: it was in ppcgeeks:
http://forum.ppcgeeks.com/showthread.php?t=17667
Click to expand...
Click to collapse
The guide you linked to is still a little bit confusing for me, not sure why, but I don't see this part anywhere;
> g. click view info and Security. Write all these settings down.
I've taken note on everything else, and the A-Key didn't apply here since it was empty..
Help?
-mak
EDIT:
> h. click view info and select M.IP, again record these settings.
I have the following;
M.IP Settings
M.IP Default Profile
M.IP Customer Profile 1
M.IP Customer Profile 2
M.IP Customer Profile 3
M.IP Customer Profile 4
M.IP Customer Profile 5
Which one do I want to write down?
Managed to install olipro 2.40
But when I try to install the Sprint update (3.35), I get to the screen where it shows my current version (2.13) and to update to the sprint version... click next then next and the ppc reboots into bootloader, then the program crashes (ROMUpdateUtility has stopped working... A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.). Any ideas? I'm using Vista and have followed the instructions to the letter.
I dont run vista (usually i run linux actually, even successfully flashed in linux, i hate MS). But i'll look and see what i can find.
Is there a way to right click the RUU and choose compatibility as XP maybe?
tried compantibility mode XP SP2
Tried using compatibility mode but wouldn't work.
hmm
so you're in bootloader but can't run the RUU?
or you can't get into bootloader?
Success!
I've finally managed to upgrade my Qwest Mogul software to DCD's 3.0.1. The problem I had with updating to Sprint 3.35 was solved by right clicking on the install icon and setting the compatability setting to XP SP2 for ALL USERS (just changing it for the current user didn't work). Once I made the Sprint update, I entered bootloader mode ran the DCD rom and everything went smoothly.
Now to play with it and see how it works! I will update you guys to let you know how it goes.
Thanks to all, especially DCD and |||Bored|||, for the help with this process. It's been a bit nerve-wrecking for me, especially since I"m a Vista user on top of how few people have the Qwest Mogul. Again, THANK YOU, THANK YOU, THANK YOU, and did I say, THANK YOU!
Wow!
My Mogul seems to run much more smoothly (and dare I say it, FASTER) and after loading all my applications I am running at about 20MB free RAM. GPS works! I've been putting this darn thing through its paces and it hasn't crashed yet! So far, the sound through my Motorola s9 headset is working flawlessly...
Happy camper!
Qwest STock ROM
Been searching but can't find the stock ROM for the Mogul. Does anybody know where I can get it (just in case I ever have to send my mogul in for exchange/repair)?
Also, does anybody know if there is a way to put a shortcut on my Mogul to turn the GPS on and off?
Is the Internet working on your upgraded Qwest Mogul?
Reddhanky:
I also have the Qwest Mogul and tried to do the upgrade (as follows):
1) Flashed Olipro 2.4
2) Flashed Sprint ROM 3.35
3) Flashed DCD 3.01_Qwest
However, after the Sprint flash, I allowed that customizations to complete. When I went to DCD, everything worked ...except for the internet/data.
I went back and reflashed the Sprint ROM and just left it there. Again, everything but the internet/data is working (I can send/receive calls and SMS).
What's worse, I tried to downgrade back to Qwest 2.13 but do not seem to be having any luck (the ROM will install, but won't change the radio ROM ... then it just sits at the black HTC splash screen and won't boot).
Qwest is sending me a replacement phone, but before I send this one back (or brick the replacement), I'd like to know how things are working for you...
P.S.: If anyone knows how to downgrade the 3.35 radio ROM back to 1.40/1.47 on a Qwest Mogul, please let me know.
- [email protected]
Back to normal!!!!
Just an update:
I'm managed to get my phone back to the Qwest 2.13 ROM. As it stands now:
Bootloader/SPL: Olipro 2.40
Radio: Titan_1.47
ROM: Qwest_2.13
To get the radio ROM loaded, I had to go the SD route. Specifically, after installing the Qwest_2.13 ROM (and watching it freeze at the black 'HTC' logo page), I found a way to load the old radio ROM:
1) I formatted my microSD card as Fat32
2) Placed the 'titan_1.47.CDMA.nbh' file on it as "TITAIMG.nbh"
3) With the phone powered off (battery removed), I inserted the microSD card and entered the bootloader (held the 'power' + 'camera' + 'soft reset button' ... keeping the 'power' + 'camera' buttons held after releasing the 'soft reset'
4) When the bootloader came up, it prompted to load the 'TITAIMG.nbh' file. I hit the 'power' button as directed. After about 5-10 min, the upload succeeded and I hit the 'soft reset' again to reboot.
Some items to note when it came back up:
1) The MSL code I had no longer worked (I got it after I did the Sprint ROM upgrade). Fortunately, when working with Qwest, they gave me the MSL code
2) The MSID info was way off (not sure if it was because of the Qwest ROM I used, or all the crap I did trying to clear/access the extrom info)
In any case, after resetting some of the EPST info, the phone reset and worked exactly like it's supposed to.
Next Step:
A) Retry the Sprint ROM (this time I have my M.IP password!!!)
&/or
B) Don't play with the Sprint ROM and just use DCD Qwest_3.01
I'll post any success/failures. But rest assured, if you do decide to play around, there does appear to be a way to get back to the beginning
[email protected]
I'm hoping somebody here can help, because I'd hate to have to get rid of a device that I really love...
Used Helmi's WM6 (http://wiki.xda-developers.com/index...angel_WM6_Home) to upgrade from WM2003SE and everything was working beautifully!
I was absolutely LOVING the new software until my device just stopped accepting the passcode that I had been using for 2 years. What I don't understand is I had to use the passcode a few times after the upgrade and all was fine. What could have happened for it to suddenly change by itself (because I know it wasn't me)?
Someone at the PocketPCAddicts forum suggested that I locate an original factory ROM to wipe out everything on the device and try again from scratch. I've searched the web looking for such a beast and can't find one (since the manufacturer/carrier no longer support it).
Can someone here help?
Debbie
Had the same problem...
Hi Debbie,
Same thing happened when I upgraded from WM2003 to the WM6 ROM. Unfortunately there was no solution and I just ended up disabling the password to ensure I never got stuck.
If you ever stumble upon a solution that works for you, I'd be happy to hear about it!
I'm about to try out the latest WM6.11 and hope it will have that particular issue solved - I'll let you know.
Ken
if you press and hold power+record+camera the same time and then reset you get to the boot loader.
you will see the 3 options, which i have fogotten, but if you put in the same options as instructions tell you after flashing a new rom, then push the mail button i believe, it will format you memory and you will be able to get back in again.
i had the same problem where i was locked out and i did that and just sync'd again to get back to my positon prior getting locked out.
hope that helps
Thanks, I will try it again.
Should I be able to simply repeat those steps, or should I start from the beginning? I don't have the device with me right now.
Thanks again,
Debbie
follow the instructions after the flashing the rom stage all the way to the end.
you choose to format memory on the gray screen with 3 options.
i flashed the wm6.1(5.2.19716) several days ago, and tested in several situations, my BA can remember the pw now, thanks for the hardwork of rom maker.
Thanks! (Now Internet Problem)
I got it to finally work, after getting a 3rd hand to help in the key combination/timing.
Only problem now is that my SX66 no longer connects to the Internet. Tried every setting/CAB I could find and no dice. AT&T tech and advanced tech support didn't help and I was told that the OS may have corrupted the connectivity.
Should I try loading another WM6 version?
Thanks again,
Debbie
Helo all - I could really use a hand here. This is the second time I have faced this issue.
When trying to make a call on my 614c when the battery is low, it crashes. Upon reboot, the radio no longer works and I cannot make any calls. It just goes into a permanent "Seaching" mode.
What I've tried:
Reboots - warm and cold
Removing the battery for 30 mins
Reset to defaults
Multiple different ROMs including upgrading and downgrading the Radio
No luck.
Last time (3 months ago) I ended up sending it to ipaqrepair to be fixed.
They said:
"the un-official hacked ROM installed in combination with a corrupt / mismatched GSM Radio ROM, these are the root cause of the issues"
I had actually NOT installed a non-official ROM until after it stopped working in a desperate attempt to fix it. But when they got it, it was a 6.5 ROM.
This time, I had upgraded it to 6.5....but I have since downgraded to the official ROM an installed the. .89 Radio update.
It wont work at all and I can't justify mailing it away for another expensive repair.
Any ideas or assistance would be greatly appreciated. Thanks.....
Any ideas? How can I effectively "blow away" all the software/drivers and set the device up as new? IpaqRepair said it was corrupt software last time....
I've installed different ROMs via flash.dio and I tried the HP radio upgrade RUU_1.8.0_081208_MP_M089_WWE. Are their files or settings that the installs I am doing do not affect - and if so, how do I repair/replace them?
Using Sim Manager, it says the phone is not ready. It's just like the phone radio won't initialize...
This phone originated overseas (Europe) - could that be somehow causing this issue since I'm using it in the USA? Something locking or changing and no longer compatible?
Not sure what else I can do and am missing my phone. Any ideas or assistance would be greatly appreciated.
Still fighting with this....maybe onto something now?
When I get the asset viewer information for the phone it shows the radio is present and the firmware number.
the Stack Version, Bootloader Version, Filesystem Verions and Radio GDFS versions are blank.
It does show the IMEI.
I'm guessing I'm missing file/data for the radio....but reinstalling the Radio ROM HP offers has not helped (maybe not complete - just an upgrade?)
Thoughts?
Anyone have a copy of the original ROM and .81 Radio ROM?
Maybe rolling it all the way back might get it operational again....
Official Drivers/Rom/Radio for 614c
Hi,
You can download official drivers from HP website. The forum does not allow me to post the link. Just search for "official 614c drivers" in google and you wil get the link.
Also note, please install using WINDOWS XP os as installing this using other os such windows 7, windows vista etc is not possible.
Okay - I tried installing the software from the HP Website using XP - but it still isn't working. It's just like the software for the radio is corrupted and it won't replace it (does not list the versions like it should when you look at the software inventory).
Is there any way to manually do this? Any advice or help would be greatly appreciated.
If anyone can help me get this resolved, I'm definitely buying them a beer.
Basically the GSM just seems to be bricked. Last time a software fix resolved it, but I'm not sure what software needs to be installed to get the radio working again.
What is the best way to blow it all away and start over? Is there a way to manually delete the radio files - or to look at them for versions/dates to see what is corrupt or mismatched.
-Alpha- said:
If anyone can help me get this resolved, I'm definitely buying them a beer.
Basically the GSM just seems to be bricked. Last time a software fix resolved it, but I'm not sure what software needs to be installed to get the radio working again.
What is the best way to blow it all away and start over? Is there a way to manually delete the radio files - or to look at them for versions/dates to see what is corrupt or mismatched.
Click to expand...
Click to collapse
Just bumping this thread...would love to have this phone back.
Bumping once again - still in hopes of fixing this phone. Can anyone help?
-Alpha- said:
Bumping once again - still in hopes of fixing this phone. Can anyone help?
Click to expand...
Click to collapse
I guess, you will get enlightenment for the problem on your device at http://forum.xda-developers.com/showthread.php?t=455840
Bump.....
Still hoping for a solution. I have gone to a Glisten now, but do not like it as much as the 614c.
I'm open to any suggestions.
Hey all! so.. my friend came from U.S and he got me a used Galaxy 4 from AT&T, and the Wifi is just stuck on a green grey situation, its not on or off
i tried any solution online that i could find. i don't know what to do anymore. nothing helping the things that are only helping was changing the router settings to a different encryption mode from WEP and then its worked but when i connected my gs4 to a different wifi connection the problem happened again
the wifi can work days if I'm not switching wifi spots.
my only solution by now was just to change to a whole new custom ROM
the problem is, that i have NO IDEA how to do it due the fact that i have a mac and i couldn't find a Proper noob guide from scratch to do that. please help me! i am a graphic designer and an artist with a MA in fine arts and i would love to help u guys too
Thank you so much!
elirandahan.com
This is what I used to get adb/fastboot on my iMac. I am on MDL build, early version phone.
You will need to find you build number first. Under Settings/About Device to determine how to flash roms on the phone--a screen of that page may help also--
rugmankc said:
This is what I used to get adb/fastboot on my iMac. I am on MDL build, early version phone.
You will need to find you build number first. Under Settings/About Device to determine how to flash roms on the phone--a screen of that page may help also--
Click to expand...
Click to collapse
hey thanks i added a photo but apparently i need 10 posts at least so just add www i58.tinypic.com/v41bue.png
the wifi is working cuz i restart it to manufacture settings again but soon as i will disconnect him and join a different connection he will go grey again
From the PM photo you are on NB1 build--
If you are going to root to flash a custom rom you will need the below two links--
Read Op page of first link, I think it depends on how the phone got to NB1 as which steps you need.
http://forum.xda-developers.com/showthread.php?t=2616221
You will need SafeStrap in below link. So, read up on that.
http://forum.xda-developers.com/showthread.php?t=2448925
These are if you are going to root to flash a rom. You can only flash Touch Wiz roms and no custom kernels or recovries.
If you want to get back to stock status you will need to flash the appropriare firmware and use Odin on a PC and Heimdall on Mac. Will have to research that.
What carrier are you on and where you are at?
Was the phone ever rooted--
I never returned to stock or used SafeStrap, so someone with hands on experience will have to help on that.
Hiii....I am also having the same problem.My phone was unlocked by a guy and everything was working fine then.From next day the i could not turn on WiFi(It would go grayish for some time and then return to normal).I tried searching for it online and found the following soln
1)Reboot and check(Didn't work)
2)Factory Reset:After doing this it worked for that initial scanning but again was back to normal once wifi was switched off
3)Factory reset and installed root browser(my phone is rooted as i was able to install root explorer) and tried renaming the wpa-supplant config file
.This was worked for me for like 4 days.
After that again the problem is back and its even worse.It is immediately turning off as opposed to delay in previous case.When i tried to follow the same procedure the config files are not present.I could not on wifi even after factory reset even once
As i am a new around here detailed help would be appreciated;
My Device Features:
1)Andriod:4.4.2,SGH I337
2)Baseband:I337UCUFNC1
3)kernel Version:3.4.0-1125940
4)Build No:KOT49H.I337UCUFNC1