Related
The actual app from Optus works a treat, but the widget just says "There was an error displaying your usage". Anyone else having trouble with it?
Same problem here. Nfi how to fix.
No luck here either.
If it actually worked, took up less space on the screen (maybe 4 icon spots or less instead of 8!!!), and usage was updated more regularly (delayed up to 24hrs tsch...) then it would be perfect.
But alas, it fails. Still, I keep the app on my homescreen.
Not sure what issues you guys are having, im running Version 1.0(1) and it works fine!
do you know by any chance the link to download this app?
cheetah2k said:
Not sure what issues you guys are having, im running Version 1.0(1) and it works fine!
Click to expand...
Click to collapse
Have you tried the widget, not just the app? Cause it's the widget that doesnt work for us (should display the usage but errors).
Also I think theres only 1 version out atm.
yanuarsia said:
do you know by any chance the link to download this app?
Click to expand...
Click to collapse
Luckily I dumped it before firmware (CSC) update, because that removed all the optus apps.
http://www.megaupload.com/?d=O7ZROHSW
http://www.2shared.com/file/EUMsvDwv/My_Account_10.html
oswade said:
Have you tried the widget, not just the app? Cause it's the widget that doesnt work for us (should display the usage but errors).
Also I think theres only 1 version out atm.
Luckily I dumped it before firmware (CSC) update, because that removed all the optus apps.
http://www.megaupload.com/?d=O7ZROHSW
http://www.2shared.com/file/EUMsvDwv/My_Account_10.html
Click to expand...
Click to collapse
you're the man...
btw,which firmware did u dump?
EDIT: and the widget not working for me too
hihihehe said:
you're the man...
btw,which firmware did u dump?
EDIT: and the widget not working for me too
Click to expand...
Click to collapse
No worries.
Sorry I wasn't quite clear in my wording...
I meant I dumped the optus app before I upgraded firmware.
I flashed to JFB, then JFF, then JG1. I can't notice many improvements... In fact my phone is a bit more laggy at JG1 (but I have more apps installed so I presume it's that).
I would flash to JG3 but... I don't wanna have to restore all my settings and data again... (done it about 5 times).
I wouldn't mind having a copy of original AUS firmware for safety reasons... or at least the CSC (contains all the carrier specific info).
It's doing the same thing for me. Curses.
ahh common problem I see. wonder how this stuff is logged...
Sent from my Nexus One using XDA App
also, he he.. curses..
Sent from my Nexus One using XDA App
We should complain to optus... maybe?
BTW optus owner singtel, has various widgets for their customers which look way better...
Hey guys, quick 2 Optus-related questions. Switched from 3 to them when I bought my Galaxy S yesterday.
1) How can you find out your account number? I've registered a username and password for using the My Account app, but it wants an Account Number that it states will be on my bill, the first of which I obviously won't be receiving for a while...
2) Is there a backup of the stock Optus firmware (JF3) including all the pre-loaded apps just in case any of us ever need to return the phone under warranty to load it back to its factory settings and firmware?
Cheers!
1) It's annoying you don't get it when you first sign up, but it's written on your first bill (pro-rata which is only a few days).
Apparently you can also call up optus and get it off customer service, however I didn't know this so I just waited.
2) No there isn't a proper flashable dump, unfortunately. If you do decide to flash your firmware (it's worth it if you can't wait for official updates.. which are very slow).
AXIS of Reality said:
Hey guys, quick 2 Optus-related questions. Switched from 3 to them when I bought my Galaxy S yesterday.
1) How can you find out your account number? I've registered a username and password for using the My Account app, but it wants an Account Number that it states will be on my bill, the first of which I obviously won't be receiving for a while...
2) Is there a backup of the stock Optus firmware (JF3) including all the pre-loaded apps just in case any of us ever need to return the phone under warranty to load it back to its factory settings and firmware?
Cheers!
Click to expand...
Click to collapse
I noticed that Optus is chargning two mpnth's billing in the first bill. Same for you guys?
eaglesteve said:
I noticed that Optus is chargning two mpnth's billing in the first bill. Same for you guys?
Click to expand...
Click to collapse
Yep, same here.
Well, I flashed a newer firmware but now I don't have mobile internet since the APN settings need to be set. =(
Where can I find the settings to use, or is there some way to get it to find them automatically?
AXIS of Reality said:
Well, I flashed a newer firmware but now I don't have mobile internet since the APN settings need to be set. =(
Where can I find the settings to use, or is there some way to get it to find them automatically?
Click to expand...
Click to collapse
Aha, found them thanks to the awesomeness of Ausdroid!
http://ausdroid.net/apns/
^ use those to find the APNs for all aussie networks once you've flashed a new firmware. Make sure you have wifi turned off when you enter the info, and once the settings are in press menu -> save and within a few seconds the 3G icon in the notification bar appeared.
I'm stumped. And agitated.
I'm stumpitated.
Every Cyanogen-based ROM i flash, I cannot get Wifi or mobile web to connect.
This is true of all current Froyo builds (all Cyanogen) and roms like Droid Does.
Weird thing is, I can get connected to wifi and ping local computer IPs. But I cant ping any websites or load them in the browser or apps.
I am flashed to MetroPCS. Haven't had any problem in ROMS like PlainJain, xtrROM, Evil Eris, etc.
Anyone have any troubleshooting steps or insight? Thanks in advance - I love this community!
jessebwallace said:
I'm stumped. And agitated.
I'm stumpitated.
Every Cyanogen-based ROM i flash, I cannot get Wifi or mobile web to connect.
This is true of all current Froyo builds (all Cyanogen) and roms like Droid Does.
Weird thing is, I can get connected to wifi and ping local computer IPs. But I cant ping any websites or load them in the browser or apps.
I am flashed to MetroPCS. Haven't had any problem in ROMS like PlainJain, xtrROM, Evil Eris, etc.
Anyone have any troubleshooting steps or insight? Thanks in advance - I love this community!
Click to expand...
Click to collapse
wifi works for me using Cyanogen-based ROMs i know for a fact because my phone isnt activated and i use wi fi
Are you using a custom kernel or something?
Hungry Man said:
Are you using a custom kernel or something?
Click to expand...
Click to collapse
Not that I'm aware of - how would I find out? Do the ROMS themselves not define the kernel?
Beyond that, why would it work in all other non-cyanogen based ROMs?
jessebwallace said:
Not that I'm aware of - how would I find out? Do the ROMS themselves not define the kernel?
Beyond that, why would it work in all other non-cyanogen based ROMs?
Click to expand...
Click to collapse
wifi does work , what rom are u using ? cuz again i have to use wi fi to test somethings and it works perfectly
tazzpatriot said:
wifi does work , what rom are u using ? cuz again i have to use wi fi to test somethings and it works perfectly
Click to expand...
Click to collapse
I said Wifi doesnt work for me, not for you. Thats the issue altogether - it seems isolated for some reason.
I tried KaosFroyo, CELB and the CM direct, as well as DroidDoes (TCP's new cyanogen based). Can't get Wifi or Mobile to work on any other them. ROM doesnt matter, it seems to be anything cyanogen based for me.
Grdlock, Ivan, xtrRom, xtrSense, EvilEris, etc have all worked for me completely though - non cyanogen based.
jessebwallace said:
I said Wifi doesnt work for me, not for you. Thats the issue altogether - it seems isolated for some reason.
I tried KaosFroyo, CELB and the CM direct, as well as DroidDoes (TCP's new cyanogen based). Can't get Wifi or Mobile to work on any other them. ROM doesnt matter, it seems to be anything cyanogen based for me.
Grdlock, Ivan, xtrRom, xtrSense, EvilEris, etc have all worked for me completely though - non cyanogen based.
Click to expand...
Click to collapse
i know ur not talkin about me lol im just tryin to help u out ,, sorry just tryin to help u out
tazzpatriot said:
i know ur not talkin about me lol im just tryin to help u out ,, sorry just tryin to help u out
Click to expand...
Click to collapse
No prob dude, I know what you meant. Didnt mean to sound ungrateful
Its just such a weird thing, and I feel limited by it, and the fact that it seems to be so isolated is irritating.
Works for me on CM5 and CM6 ROMs.
hallstevenson said:
Works for me on CM5 and CM6 ROMs.
Click to expand...
Click to collapse
Guys,
I know it works on other peoples phones. Not being rude, but I dont need a list of people who its working for. I'm asking for some help, some direction, some possible things to check.
Not to be off topic.. but can someone direct me to the CM direct ROM? I haven't seen that anywhere. Sorry if thats a stupid question lol
Its just the one with CM in the post title.
http://forum.xda-developers.com/showthread.php?t=728866
jessebwallace said:
I'm stumped. And agitated.
I'm stumpitated.
Every Cyanogen-based ROM i flash, I cannot get Wifi or mobile web to connect.
This is true of all current Froyo builds (all Cyanogen) and roms like Droid Does.
Weird thing is, I can get connected to wifi and ping local computer IPs. But I cant ping any websites or load them in the browser or apps.
I am flashed to MetroPCS. Haven't had any problem in ROMS like PlainJain, xtrROM, Evil Eris, etc.
Anyone have any troubleshooting steps or insight? Thanks in advance - I love this community!
Click to expand...
Click to collapse
Try my flash for metro here:
http://forum.xda-developers.com/showthread.php?t=730289
As always make a nandroid backup first.
Make sure you have booted your rom at least once successfully before applying my flash (it modifies the telephony.db that will not be present until after the first boot)
The problem you are running into is that in the build.prop the carrier info is still pointing to verizon, once i changed mine to cricket it worked, i assume changing it to metro would work for you as well.
I believe metro's proper MNC should be 310024 if you want to edit it manually, if i recall off the top of my head, anyways my flash should set that for you and get you squared away.
EDIT**
Actually sorry i mis read this, my flash will not assist with WIFI but it should get your mobile network to route through metro's proxy and get MMS working.
This sounds like a ROM issue if wifi is not working, or something hardware related.
token419 said:
Try my flash for metro here:
http://forum.xda-developers.com/showthread.php?t=730289
As always make a nandroid backup first.
Make sure you have booted your rom at least once successfully before applying my flash (it modifies the telephony.db that will not be present until after the first boot)
The problem you are running into is that in the build.prop the carrier info is still pointing to verizon, once i changed mine to cricket it worked, i assume changing it to metro would work for you as well.
I believe metro's proper MNC should be 310024 if you want to edit it manually, if i recall off the top of my head, anyways my flash should set that for you and get you squared away.
EDIT**
Actually sorry i mis read this, my flash will not assist with WIFI but it should get your mobile network to route through metro's proxy and get MMS working.
This sounds like a ROM issue if wifi is not working, or something hardware related.
Click to expand...
Click to collapse
Already running your flash, boss
Doesnt make a difference on these roms for me.
Works nice on xtrROM, though
Hmm, so to clairify if you use CELB 2.8, boot it, then flash my flash, then boot CELB then reboot CELB that you still do not get mobile web/mms?
Weird, almost sounds like your not getting DNS or something.
if you do an NSlookup on like www.google.com, then on the phone try to ping the number you got from nslookup, do the numbers match or what comes back?
I think that this flash won't work for some Froyo ROMs for whatever reason.
Either Autostart doesn't start up (did it ever ask you for SuperUser permissions, ever?)
Or
u2nl needs to be in a different place (worth investigation)
Or
Your proxy is set correctly, so wifi is trying to go through the proxy (which may not work), but something else isn't working correctly, so wifi is looking through the proxy, but something ELSE is wrong with mobile network.
Do a nand backup
then restore yourself to a 2.1 ROM and make sure it still works.
Is the first condition I listed at the top of this post, the case? Or did it ask you? 2.2 might have a superuser issue with Autostart. That'd make sense, since the Proxy might be working (which would be why your internet won't work when wifi is on), but your Mobile Network won't (which, of course it wouldn't, of Autostart wasn't starting up).
jessebwallace said:
I know it works on other peoples phones. Not being rude, but I dont need a list of people who its working for. I'm asking for some help, some direction, some possible things to check.
Click to expand...
Click to collapse
Sorry, but I don't know what there is to "check". There are NO options or configurations necessary with the WiFi setup.
token419 said:
Hmm, so to clairify if you use CELB 2.8, boot it, then flash my flash, then boot CELB then reboot CELB that you still do not get mobile web/mms?
Weird, almost sounds like your not getting DNS or something.
if you do an NSlookup on like www.google.com, then on the phone try to ping the number you got from nslookup, do the numbers match or what comes back?
Click to expand...
Click to collapse
K, CELB 2.8 was the first Cyanogen rom to work, thats cool - but it didn't work with your flash. I had to do the manual input from the guide. I already had autostart.sh and u2nl in my root - does your flash overwrite them? still, even if it didnt, it should have set the right permissions, right? I wasnt until I input all the shell commands that I got mobile and app web.
I think that this flash won't work for some Froyo ROMs for whatever reason.
Either Autostart doesn't start up (did it ever ask you for SuperUser permissions, ever?)
Click to expand...
Click to collapse
Yes, it did ask me for permission. On all ROMs ive tried, Froyo, DroidDoes, etc.
Or
u2nl needs to be in a different place (worth investigation)
Click to expand...
Click to collapse
Seems plausible
Or
Your proxy is set correctly, so wifi is trying to go through the proxy (which may not work), but something else isn't working correctly, so wifi is looking through the proxy, but something ELSE is wrong with mobile network.
Click to expand...
Click to collapse
This wouldnt explain while neither Wifi NOR mobile web doesnt work on either. I can't get either to work all all, and they both work on regular 2.1 OTA Roms (and now CELB 2.8)
Do a nand backup
then restore yourself to a 2.1 ROM and make sure it still works.
Click to expand...
Click to collapse
I use xtrROM 3.0 day to day, and its always worked. So yes, it still does.
Is the first condition I listed at the top of this post, the case? Or did it ask you? 2.2 might have a superuser issue with Autostart. That'd make sense, since the Proxy might be working (which would be why your internet won't work when wifi is on), but your Mobile Network won't (which, of course it wouldn't, of Autostart wasn't starting up).
Click to expand...
Click to collapse
Autostart asks for permissions, so I assume its starting i'll try again just to confirm. You mentioned the Proxy might be working which would cut the wifi - how do I get around that?
Hello all,
I'm aware that this might be better placed in the thread announcing the FW release itself, but there seems to be turning into wailing wall where ppl who raise issues but they're left unanswered (I asked the same questions there but in vain).
The issues / questions I have with wrt that realease
1) Serious issue: 3G data connection.
No matter what settings the phone does initiate a data connection -- I enabled "Use packet data", enabled "Data Roaming" (even if I'm in my home netw) and even set the network mode to "WCDMA only", but all to no avail: There is no 3G icon close to the signal strength bars in notification area and the the "Mobile Network State" in the Status is reported as "Disconnected" and the phone cannot connect to the data network
Everything worked perfectly fine in JM release.
2) The one click lag fix does not work on XXJPH
The one click lag fix linked from the first post in the release thread (namely this lag fix: http://forum.xda-developers.com/showthread.php?p=8223512) is, as per version 1.6.7 (which seems to be the last one) not relevant for XXJPH, but there are references to a "release 2" of the said fix. However, I cannot locate that .... Am I missing smth here ?
3) Input language selection.
There is a very limited set of input languages that can be selected. In particular, there is no choice for scandinavian languages (swedish / norwegian / danish). Can that be added ?
TIA for the feedback.
Florian
1) Have you set a valid APN in mobile connections?
2) I don't use a lagfix in JPH, its running very smooth and fast for me
3) no idea
I'm currently using 3G data and OCLF on my JPH.
Did you wipe your data/cache?
First and foremost, thanks for the quick input.
1) Yes, I did a data wipe / factory reset after flashing -- since that was what the FW instruction said (and it felt better that way)
2) Maybe this info is buried somewhere deep in the FW thread and I've missed it, but I haven't seen any instructions that I need to define an APN "manually" -- it all "just worked" in JM / JM1 without that.
Anyway, after you pointed that out I defined a new APN (took me a while to find how and what to set in there...) but now I got a 3G connection.
So many thanks for that.
The question on how to add additional input languages still stands.
Thanks again for the help.
What CSC file did you use?
Because I think the APN Settings are coming from the CSC, not the Firmware itself (PDA File).
FlorianO said:
3) Input language selection.
There is a very limited set of input languages that can be selected. In particular, there is no choice for scandinavian languages (swedish / norwegian / danish). Can that be added ?
Click to expand...
Click to collapse
Why do people always forget that Finland (and also Iceland) are a part of Scandinavia? Anyway good to know this.
What about bluetooth? I read in the other thread it doesn't work properly.
Bluetooth works fine
1) You don't have any APNs set up (well none the phone can use anyway) - that's why you have no 3G (or 2G) data. Search for how to configure APNs manually
2) OCLF (one click lag fix) works perfectly with XXJPH. Make sure you have correctly rooted your phone.
3) This is a development release, not one which has gone through all the localisation that a full release goes through.
Seen a lot of people having problems with one click lagfix. From my experience the only thing that stops it working is having apps moved to sd card, use app manager and make sure all apps are on phone then re run and it should work.
On the other issuse i haven't suffered from any of them
FlorianO said:
2) The one click lag fix does not work on XXJPH
3) Input language selection.
Click to expand...
Click to collapse
2. For me it workes fine, had to remove SD-card thou when applying
3. Use swype files from XXJP1
First and foremost, thanks for the input
stuclark said:
Bluetooth works fine
1) You don't have any APNs set up (well none the phone can use anyway) - that's why you have no 3G (or 2G) data. Search for how to configure APNs manually
Click to expand...
Click to collapse
As I wrote in my previous post, as soon as someone pointed out that I need to configure the APNs I did that and now both Internet and MMS are working fine. However, I haven't seen anywhere mentioned that this was needed with this firmware version (and, again, this was never an issue with the previous versions).
stuclark said:
2) OCLF (one click lag fix) works perfectly with XXJPH. Make sure you have correctly rooted your phone.
Click to expand...
Click to collapse
Are there any XXJPH-sepecifc OCLF instructions ? TIA for any pointers / instructions
stuclark said:
3) This is a development release, not one which has gone through all the localisation that a full release goes through.
Click to expand...
Click to collapse
Understood...Is it possible to add localisation to this release ? Or is the only option to wait for the official full release...
drygmasken said:
3. Use swype files from XXJP1
Click to expand...
Click to collapse
Can you please point me to where to find them and the installation instructions (I'm relatively new to Android...)
Thanks in advance for the help
Pume said:
Why do people always forget that Finland (and also Iceland) are a part of Scandinavia? Anyway good to know this.
Click to expand...
Click to collapse
Thats absolutely not true!!
For Scandinavien readers: "no.wikipedia.org/wiki/Skandinavia"
For all others: "en.wikipedia.org/wiki/Scandinavia"
The original and "true" term Scandinavia is only referring to Norway, Denmark and Sweden. Sorry You Finnish guys!
FlorianO said:
Can you please point me to where to find them and the installation instructions (I'm relatively new to Android...)
Thanks in advance for the help
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=7412595&postcount=73
drygmasken said:
http://forum.xda-developers.com/showpost.php?p=7412595&postcount=73
Click to expand...
Click to collapse
Thanks again.
Sorry for being so thick (well, I'm new to Android...) but it seems that in order to (re)mount the "/system" partition in read-write mode (where these files must go) I must root my device anyway...
Or is there any easier/simpler alternative ?
2) The one click lag fix does not work on XXJPH
- Your phone has to be rooted.
- If you use One Click Lag Fix v1.6.7 by RyanZA UNINSTALL all apps on SD card: Settings-> Applications->Manage Applications->On SD card->remove all apps (e.g. Google Earth, Angry Birds)
You can re-install the apps after you have applied the 'OneClickLagFix V1+"
I've done some more reading and fixing it does look like "Major PITA": One needs to root the phone and there are some instructions on how to root JPH at this post: http://forum.xda-developers.com/showpost.php?p=8157213&postcount=289.
Still, that doesn't look for the faint of heart (or for those who lack the time and/or will to go through the process, for that matter).
Moreover, since the official 2.2 release is due in 3 days, I guess I'l live with the JPH as it is on my phone wait for that instead.
Thanks to all that tried to help.
ONLY problem I have is wireless errors sometimes, but can be solved by turning WiFi on in actual settings menu.
AdamDowning said:
ONLY problem I have is wireless errors sometimes, but can be solved by turning WiFi on in actual settings menu.
Click to expand...
Click to collapse
Well, I have "issues" with that as well -- if the WiFi is turned on, then data network traffic goes through the WiFi instead of 3G (normal behavior). However, when the WiFi is turned off I need to toggle the phone on and off a few times before the 3G connection is re-established.
Anyway, hope that all that will be fixed in the official version...
Sometimes after cancelling calls my JPH just stays black screen ... need to pull the battery.
I found GPS really best through all builds ... but not satisfying. It gets a fix kind of quick but isnt very accurate :/
OCF, Bluetooth and swype are just working fine :> no issues there. Especially market is just cool ... no fix needed. Found flash and looks like all apps are there.
Deleted
Changelogs
Deleted
Kernel
Kernel
Features
Swap
Overclock up to 1000 MHz
Tun
Undervolt
O3 flag
Blur fix
Some new governors
Improved Camera
Improved wlan drivers
Thanks:
> Cyanogen.inc for Cm9 kernel I used as base
> Gellmar for a charger and msc fixes and sdmerge
> Qcom for the great Soc and a some help
> CodeAurora Forum for many hacks and mods for msm7x25a
If someone ask me why I don't want that my work is used, it means that you don't know xda rules so here i report the #12 that explain the sharing policy for both rom and kernel.
Cyanoid kernel is for cyanoid rom only.
XDA Rule #12. Using the work of others.
If you are developing something that is based on the work of another Member, you MUST first seek their permission and you must give credit to the member whose work you used. If a dispute occurs about who developed / created a piece of work, first try to settle the matter by private message and NOT in open forum. If this fails, you may then contact a Moderator and provide clear evidence that the work was created by you.
Convincing evidence will result in the copied work being removed. If there is no clear evidence that it was you who created the work, then in the spirit of sharing, all work will remain posted on the forums.
As an addition, developers have the right to hold exclusivity over their work for as long as it is deemed necessary by that developer. However, if the work is claimed as exclusive, it must remain as such. No selective sharing will be allowed (ie, allowing certain people to use it and not others). Should the developer decide to start sharing the work with others, the work automatically becomes fair game for all to use, albeit with the relative credit displayed.
In regard to permissions, the same rules apply for this but if permission was already given and unless there is a very valid reason, it cannot be revoked (same applies to major updates on the work). Under that same premise, permissions cannot be denied unless the work is exclusive or under extreme circumstances.
In plain English: If you want to keep your work exclusive, go for it. However, if you are going to share your work, do it fairly.
These rules apply to all software posted on XDA (including but not limited to ROMs, RUUs, apps, games, kernels, themes, icons, etc) unless that software comes with a license that waives these rules.
Click to expand...
Click to collapse
Screenshots
Deleted
holy kanging.........
★★★[jellycast_forever]★★★
emokeizer said:
holy kanging.........
★★★[jellycast_forever]★★★
Click to expand...
Click to collapse
What do you mean?
that systemui is @emokeizer's work..you should at least give credits
eyesore123 said:
that systemui is @emokeizer's work..you should at least give credits
Click to expand...
Click to collapse
This status bar isn't his work. I gave the credit to the developer on the website.
Inviato dal mio Nexus 7 usando Tapatalk 4
wifi tethering really works? impressive I don't think anyone's fixed that yet on ICS for this device or is there some other workaround that I don't know about? also wow I never seen a installer with a custom gui/touchscreen controls like this this is pretty cool. love the installation percentage meter too!
ok super brief testing theres a bug on first boot the back to home button won't work at all but restarting the phone fixes that.
and a continuous bug that seems to be on all custom roms I've tried whenever I use my Amaysim brand sim card on a custom rom it says the carrier is "Yes Optus" which is the owner of the network im on but they resell to Amaysim and so Amaysim's name should be coming up but since it isn't or for some other reason the APN fields are blank and trying to add to it, it won't save a APN so I can't get any mobile data at all. Phone calls and Texts will still work oddly.
But if I use this same sim card on my phone with stock gingerbread I can get data and it will say Amaysim as my carrier weird problem right?
If I use another simcard that's not Amaysim like Telstra (different operator) it works fine and mobile data will work.
Interesting rom I'll keep testing.
Scaregdearimasu said:
wifi tethering really works? impressive I don't think anyone's fixed that yet on ICS for this device or is there some other workaround that I don't know about? also wow I never seen a installer with a custom gui/touchscreen controls like this this is pretty cool. love the installation percentage meter too!
ok super brief testing theres a bug on first boot the back to home button won't work at all but restarting the phone fixes that.
and a continuous bug that seems to be on all custom roms I've tried whenever I use my Amaysim brand sim card on a custom rom it says the carrier is "Yes Optus" which is the owner of the network im on but they resell to Amaysim and so Amaysim's name should be coming up but since it isn't or for some other reason the APN fields are blank and trying to add to it, it won't save a APN so I can't get any mobile data at all. Phone calls and Texts will still work oddly.
But if I use this same sim card on my phone with stock gingerbread I can get data and it will say Amaysim as my carrier weird problem right?
If I use another simcard that's not Amaysim like Telstra (different operator) it works fine and mobile data will work.
Interesting rom I'll keep testing.
Click to expand...
Click to collapse
You must do a dlavik cache, for fix this home key problem, WiFi thering is working but u have to reinstall yhe thering app (system/app)
Sent from my Mi2s
linuxxxx said:
You must do a dlavik cache, for fix this home key problem, WiFi thering is working but u have to reinstall yhe thering app (system/app)
Sent from my Mi2s
Click to expand...
Click to collapse
I always clear Dalvik cache before installing a new rom but still the home key wouldn't work but all I did was restart/reboot and that fixed it.
Very cool if I get that APN/carrier issue solved I'll try out the tethering.
thanks for your response.
Scaregdearimasu said:
I always clear Dalvik cache before installing a new rom but still the home key wouldn't work but all I did was restart/reboot and that fixed it.
Very cool if I get that APN/carrier issue solved I'll try out the tethering.
thanks for your response.
Click to expand...
Click to collapse
You must follow the last part of the install video i show how to fix this, u can change ur carrier name in systemui settings, for apns when you chance somwthing press menu button and click save
Sent from my Mi2s
linuxxxx said:
You must do a dlavik cache, for fix this home key problem, WiFi thering is working but u have to reinstall yhe thering app (system/app)
Sent from my Mi2s
Click to expand...
Click to collapse
linuxxxx said:
You must follow the last part of the install video i show how to fix this, u van change ur carrier name in systemui settings, for apns when u chance somwthing press menu button and click save
Sent from my Mi2s
Click to expand...
Click to collapse
I'll make a video for you tomorrow showing you what I mean.
I know how to save apns it's just after I click save it does nothing.
I don't think the carrier name is a problem I just think it's a symptom of something else being an issue. Yes there is a way to change the carrier name to whatever I want it to be but I doubt that'll allow me to start using mobile data.
Scaregdearimasu said:
I'll make a video for you tomorrow showing you what I mean.
I know how to save apns it's just after I click save it does nothing.
I don't think the carrier name is a problem I just think it's a symptom of something else being an issue. Yes there is a way to change the carrier name to whatever I want it to be but I doubt that'll allow me to start using mobile data.
Click to expand...
Click to collapse
OK i checked, so do i have this problem, it show me 'Hutchinson 3g' intestead 3 ITA. It's an aosp setting
Sent from my Mi2s
linuxxxx said:
OK i checked, so do i have this problem, it show me 'Hutchinson 3g' intestead 3 ITA. It's an aosp setting
Sent from my Mi2s
Click to expand...
Click to collapse
Does that block you from using mobile data and are default apn settings showing up?
So since it's a Aosp setting any idea on how to fix it to enable data usage? seems weird how it's only occurring on some sims.
Scaregdearimasu said:
Does that block you from using mobile data and are default apn settings showing up?
So since it's a Aosp setting any idea on how to fix it to enable data usage? seems weird how it's only occurring on some sims.
Click to expand...
Click to collapse
Try, it worked for me
Sent from my Mi2s
linuxxxx said:
Try, it worked for me
Sent from my Mi2s
Click to expand...
Click to collapse
If by Aosp settings you mean Quick notifications panel settings for "change Carrier Label" yeah no that doesn't fix the APN issue.
Here I took a video for you It shows my Amaysim Sim card going in but Shows Yes Optus and no ability to save an APN or use Data.
and it shows I can use a vodaphone sim with mobile data and it has default apn already on it. no clue why one works and the other doesn't
anyway heres the video youtube should be cutting out the shaky-ness of it but if you catch it too soon you see it all shaky sorry about that.
https://www.youtube.com/watch?v=z4d_8BhEsr8
Scaregdearimasu said:
If by Aosp settings you mean Quick notifications panel settings for "change Carrier Label" yeah no that doesn't fix the APN issue.
Here I took a video for you It shows my Amaysim Sim card going in but Shows Yes Optus and no ability to save an APN or use Data.
and it shows I can use a vodaphone sim with mobile data and it has default apn already on it. no clue why one works and the other doesn't
anyway heres the video youtube should be cutting out the shaky-ness of it but if you catch it too soon you see it all shaky sorry about that.
https://www.youtube.com/watch?v=z4d_8BhEsr8
Click to expand...
Click to collapse
Have u try using operator name? Or can u use an auto_config SMS? (This will depend by your operator) is this phone brand?
Build 8 relased for the 1000 post on the androidiani.com forum!!!
Inviato dal mio Nexus 7 usando Tapatalk 4
Scaregdearimasu said:
If by Aosp settings you mean Quick notifications panel settings for "change Carrier Label" yeah no that doesn't fix the APN issue.
Here I took a video for you It shows my Amaysim Sim card going in but Shows Yes Optus and no ability to save an APN or use Data.
and it shows I can use a vodaphone sim with mobile data and it has default apn already on it. no clue why one works and the other doesn't
anyway heres the video youtube should be cutting out the shaky-ness of it but if you catch it too soon you see it all shaky sorry about that.
https://www.youtube.com/watch?v=z4d_8BhEsr8
Click to expand...
Click to collapse
I watched the video it look like a SIM problem, try tour SIM on another phone or contact your provider
Inviato dal mio Nexus 7 usando Tapatalk 4
Hey All,
I had to update this thread a little it was pretty terrible on wording and full details. (Sorry About That)
The current hotspot hack still works on this new update too which is now CRL2.
You still need to add dun but it will look like this example below....
Ex: default,mms,dun,xcap,supl << Credits to whoever found this out first I just applied it to here and it works I’m currently using it now for this post :fingers-crossed::good:
*In order to edit your APN you will have to download Quick Shortcut App from the Play store*
Another thing if you didn’t know Good Lock is out and working perfectly too with new clock options and custom pulldown options that you can set to your liking.
*I added screenshots to help set what I set or how my good lock looks.*
I have a T-Mobile S8+ on Sprint network, and OTA keeps failing.
Can I just ODIN T-Mobile S8+ with Sprint's RIB firmware when it comes out?
Will I lose data?
lentm said:
I have a T-Mobile S8+ on Sprint network, and OTA keeps failing.
Can I just ODIN T-Mobile S8+ with Sprint's RIB firmware when it comes out?
Will I lose data?
Click to expand...
Click to collapse
that im am not sure of...id reommend readin around before you upgrade
alot of things has changed in the ui...im sure some code have changed too
Tha_Dynasty2049 said:
that im am not sure of...id reommend readin around before you upgrade
alot of things has changed in the ui...im sure some code have changed too
Click to expand...
Click to collapse
Thanks, I still can't find the answer in the other threads though.
What does xcap and supl do for the apn settings?
zune70 said:
What does xcap and supl do for the apn settings?
Click to expand...
Click to collapse
they was added by sprint in the newest update
it was not like this before the update
XCAP is a protocol which enables a user configuring his service data (e.g., modifying a call forwarding number, changing his barring services) on the Multimedia Telephony Application Server (MTAS). The XCAP flow is typically carried over the default bearer of the Internet APN.
SUPL is a technology which utilizes existing standards where available and possible, to transfer assistance data and positioning data over a User Plane bearer, such as IP, to aid network and SUPL Enabled Terminal (SET) based positioning technologies in the calculation of a SET's position
lentm said:
Thanks, I still can't find the answer in the other threads though.
Click to expand...
Click to collapse
Id say leae it then...id like to have a perfect working phone over guessing for a new software you may not like
Tha_Dynasty2049 said:
The new October Patch is nice so far....they have disabled Calling Plus but gave u the real feature
which is under connections and then voice networks and you will see VoLTE
turn it on if you want to use internet and phone at the same time.
Besides that we got AR Emojis and now super slow motion.
My hotspot hack still works on this new update too.
You still need to add dun but it will look like this below....
Ex: default,mms,dun,xcap,supl << Credits to whoever found this out first I just applied it to here and it works im currently using it now for this post :fingers-crossed::good:
Another thing if you didnt know GoodLock is out and working perfectly too with new clock options and custom pulldown options
*I added screenshots to help set what i set or how my good lock looks.*
Click to expand...
Click to collapse
How do we get the hotspot?
EDIT: NVM, got it!
JoeFCaputo113 said:
How do we get the hotspot?
EDIT: NVM, got it!
Click to expand...
Click to collapse
Great...
I did forget to mention i got to my apn settings by using Quick Short Cut Maker App
Tha_Dynasty2049 said:
Great...
I did forget to mention i got to my apn settings by using Quick Short Cut Maker App
Click to expand...
Click to collapse
Have you done the new update yet? Did Hotspot still work?
13druber said:
Have you done the new update yet? Did Hotspot still work?
Click to expand...
Click to collapse
Yes currently using it on CRK1 now to reply
Is there a way to convert CRL2 to CRL 1?
This is still working on CRL2. I just redid mine last night. Are you having a problem with it?