Hello all,
I'm aware that this might be better placed in the thread announcing the FW release itself, but there seems to be turning into wailing wall where ppl who raise issues but they're left unanswered (I asked the same questions there but in vain).
The issues / questions I have with wrt that realease
1) Serious issue: 3G data connection.
No matter what settings the phone does initiate a data connection -- I enabled "Use packet data", enabled "Data Roaming" (even if I'm in my home netw) and even set the network mode to "WCDMA only", but all to no avail: There is no 3G icon close to the signal strength bars in notification area and the the "Mobile Network State" in the Status is reported as "Disconnected" and the phone cannot connect to the data network
Everything worked perfectly fine in JM release.
2) The one click lag fix does not work on XXJPH
The one click lag fix linked from the first post in the release thread (namely this lag fix: http://forum.xda-developers.com/showthread.php?p=8223512) is, as per version 1.6.7 (which seems to be the last one) not relevant for XXJPH, but there are references to a "release 2" of the said fix. However, I cannot locate that .... Am I missing smth here ?
3) Input language selection.
There is a very limited set of input languages that can be selected. In particular, there is no choice for scandinavian languages (swedish / norwegian / danish). Can that be added ?
TIA for the feedback.
Florian
1) Have you set a valid APN in mobile connections?
2) I don't use a lagfix in JPH, its running very smooth and fast for me
3) no idea
I'm currently using 3G data and OCLF on my JPH.
Did you wipe your data/cache?
First and foremost, thanks for the quick input.
1) Yes, I did a data wipe / factory reset after flashing -- since that was what the FW instruction said (and it felt better that way)
2) Maybe this info is buried somewhere deep in the FW thread and I've missed it, but I haven't seen any instructions that I need to define an APN "manually" -- it all "just worked" in JM / JM1 without that.
Anyway, after you pointed that out I defined a new APN (took me a while to find how and what to set in there...) but now I got a 3G connection.
So many thanks for that.
The question on how to add additional input languages still stands.
Thanks again for the help.
What CSC file did you use?
Because I think the APN Settings are coming from the CSC, not the Firmware itself (PDA File).
FlorianO said:
3) Input language selection.
There is a very limited set of input languages that can be selected. In particular, there is no choice for scandinavian languages (swedish / norwegian / danish). Can that be added ?
Click to expand...
Click to collapse
Why do people always forget that Finland (and also Iceland) are a part of Scandinavia? Anyway good to know this.
What about bluetooth? I read in the other thread it doesn't work properly.
Bluetooth works fine
1) You don't have any APNs set up (well none the phone can use anyway) - that's why you have no 3G (or 2G) data. Search for how to configure APNs manually
2) OCLF (one click lag fix) works perfectly with XXJPH. Make sure you have correctly rooted your phone.
3) This is a development release, not one which has gone through all the localisation that a full release goes through.
Seen a lot of people having problems with one click lagfix. From my experience the only thing that stops it working is having apps moved to sd card, use app manager and make sure all apps are on phone then re run and it should work.
On the other issuse i haven't suffered from any of them
FlorianO said:
2) The one click lag fix does not work on XXJPH
3) Input language selection.
Click to expand...
Click to collapse
2. For me it workes fine, had to remove SD-card thou when applying
3. Use swype files from XXJP1
First and foremost, thanks for the input
stuclark said:
Bluetooth works fine
1) You don't have any APNs set up (well none the phone can use anyway) - that's why you have no 3G (or 2G) data. Search for how to configure APNs manually
Click to expand...
Click to collapse
As I wrote in my previous post, as soon as someone pointed out that I need to configure the APNs I did that and now both Internet and MMS are working fine. However, I haven't seen anywhere mentioned that this was needed with this firmware version (and, again, this was never an issue with the previous versions).
stuclark said:
2) OCLF (one click lag fix) works perfectly with XXJPH. Make sure you have correctly rooted your phone.
Click to expand...
Click to collapse
Are there any XXJPH-sepecifc OCLF instructions ? TIA for any pointers / instructions
stuclark said:
3) This is a development release, not one which has gone through all the localisation that a full release goes through.
Click to expand...
Click to collapse
Understood...Is it possible to add localisation to this release ? Or is the only option to wait for the official full release...
drygmasken said:
3. Use swype files from XXJP1
Click to expand...
Click to collapse
Can you please point me to where to find them and the installation instructions (I'm relatively new to Android...)
Thanks in advance for the help
Pume said:
Why do people always forget that Finland (and also Iceland) are a part of Scandinavia? Anyway good to know this.
Click to expand...
Click to collapse
Thats absolutely not true!!
For Scandinavien readers: "no.wikipedia.org/wiki/Skandinavia"
For all others: "en.wikipedia.org/wiki/Scandinavia"
The original and "true" term Scandinavia is only referring to Norway, Denmark and Sweden. Sorry You Finnish guys!
FlorianO said:
Can you please point me to where to find them and the installation instructions (I'm relatively new to Android...)
Thanks in advance for the help
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=7412595&postcount=73
drygmasken said:
http://forum.xda-developers.com/showpost.php?p=7412595&postcount=73
Click to expand...
Click to collapse
Thanks again.
Sorry for being so thick (well, I'm new to Android...) but it seems that in order to (re)mount the "/system" partition in read-write mode (where these files must go) I must root my device anyway...
Or is there any easier/simpler alternative ?
2) The one click lag fix does not work on XXJPH
- Your phone has to be rooted.
- If you use One Click Lag Fix v1.6.7 by RyanZA UNINSTALL all apps on SD card: Settings-> Applications->Manage Applications->On SD card->remove all apps (e.g. Google Earth, Angry Birds)
You can re-install the apps after you have applied the 'OneClickLagFix V1+"
I've done some more reading and fixing it does look like "Major PITA": One needs to root the phone and there are some instructions on how to root JPH at this post: http://forum.xda-developers.com/showpost.php?p=8157213&postcount=289.
Still, that doesn't look for the faint of heart (or for those who lack the time and/or will to go through the process, for that matter).
Moreover, since the official 2.2 release is due in 3 days, I guess I'l live with the JPH as it is on my phone wait for that instead.
Thanks to all that tried to help.
ONLY problem I have is wireless errors sometimes, but can be solved by turning WiFi on in actual settings menu.
AdamDowning said:
ONLY problem I have is wireless errors sometimes, but can be solved by turning WiFi on in actual settings menu.
Click to expand...
Click to collapse
Well, I have "issues" with that as well -- if the WiFi is turned on, then data network traffic goes through the WiFi instead of 3G (normal behavior). However, when the WiFi is turned off I need to toggle the phone on and off a few times before the 3G connection is re-established.
Anyway, hope that all that will be fixed in the official version...
Sometimes after cancelling calls my JPH just stays black screen ... need to pull the battery.
I found GPS really best through all builds ... but not satisfying. It gets a fix kind of quick but isnt very accurate :/
OCF, Bluetooth and swype are just working fine :> no issues there. Especially market is just cool ... no fix needed. Found flash and looks like all apps are there.
Related
The actual app from Optus works a treat, but the widget just says "There was an error displaying your usage". Anyone else having trouble with it?
Same problem here. Nfi how to fix.
No luck here either.
If it actually worked, took up less space on the screen (maybe 4 icon spots or less instead of 8!!!), and usage was updated more regularly (delayed up to 24hrs tsch...) then it would be perfect.
But alas, it fails. Still, I keep the app on my homescreen.
Not sure what issues you guys are having, im running Version 1.0(1) and it works fine!
do you know by any chance the link to download this app?
cheetah2k said:
Not sure what issues you guys are having, im running Version 1.0(1) and it works fine!
Click to expand...
Click to collapse
Have you tried the widget, not just the app? Cause it's the widget that doesnt work for us (should display the usage but errors).
Also I think theres only 1 version out atm.
yanuarsia said:
do you know by any chance the link to download this app?
Click to expand...
Click to collapse
Luckily I dumped it before firmware (CSC) update, because that removed all the optus apps.
http://www.megaupload.com/?d=O7ZROHSW
http://www.2shared.com/file/EUMsvDwv/My_Account_10.html
oswade said:
Have you tried the widget, not just the app? Cause it's the widget that doesnt work for us (should display the usage but errors).
Also I think theres only 1 version out atm.
Luckily I dumped it before firmware (CSC) update, because that removed all the optus apps.
http://www.megaupload.com/?d=O7ZROHSW
http://www.2shared.com/file/EUMsvDwv/My_Account_10.html
Click to expand...
Click to collapse
you're the man...
btw,which firmware did u dump?
EDIT: and the widget not working for me too
hihihehe said:
you're the man...
btw,which firmware did u dump?
EDIT: and the widget not working for me too
Click to expand...
Click to collapse
No worries.
Sorry I wasn't quite clear in my wording...
I meant I dumped the optus app before I upgraded firmware.
I flashed to JFB, then JFF, then JG1. I can't notice many improvements... In fact my phone is a bit more laggy at JG1 (but I have more apps installed so I presume it's that).
I would flash to JG3 but... I don't wanna have to restore all my settings and data again... (done it about 5 times).
I wouldn't mind having a copy of original AUS firmware for safety reasons... or at least the CSC (contains all the carrier specific info).
It's doing the same thing for me. Curses.
ahh common problem I see. wonder how this stuff is logged...
Sent from my Nexus One using XDA App
also, he he.. curses..
Sent from my Nexus One using XDA App
We should complain to optus... maybe?
BTW optus owner singtel, has various widgets for their customers which look way better...
Hey guys, quick 2 Optus-related questions. Switched from 3 to them when I bought my Galaxy S yesterday.
1) How can you find out your account number? I've registered a username and password for using the My Account app, but it wants an Account Number that it states will be on my bill, the first of which I obviously won't be receiving for a while...
2) Is there a backup of the stock Optus firmware (JF3) including all the pre-loaded apps just in case any of us ever need to return the phone under warranty to load it back to its factory settings and firmware?
Cheers!
1) It's annoying you don't get it when you first sign up, but it's written on your first bill (pro-rata which is only a few days).
Apparently you can also call up optus and get it off customer service, however I didn't know this so I just waited.
2) No there isn't a proper flashable dump, unfortunately. If you do decide to flash your firmware (it's worth it if you can't wait for official updates.. which are very slow).
AXIS of Reality said:
Hey guys, quick 2 Optus-related questions. Switched from 3 to them when I bought my Galaxy S yesterday.
1) How can you find out your account number? I've registered a username and password for using the My Account app, but it wants an Account Number that it states will be on my bill, the first of which I obviously won't be receiving for a while...
2) Is there a backup of the stock Optus firmware (JF3) including all the pre-loaded apps just in case any of us ever need to return the phone under warranty to load it back to its factory settings and firmware?
Cheers!
Click to expand...
Click to collapse
I noticed that Optus is chargning two mpnth's billing in the first bill. Same for you guys?
eaglesteve said:
I noticed that Optus is chargning two mpnth's billing in the first bill. Same for you guys?
Click to expand...
Click to collapse
Yep, same here.
Well, I flashed a newer firmware but now I don't have mobile internet since the APN settings need to be set. =(
Where can I find the settings to use, or is there some way to get it to find them automatically?
AXIS of Reality said:
Well, I flashed a newer firmware but now I don't have mobile internet since the APN settings need to be set. =(
Where can I find the settings to use, or is there some way to get it to find them automatically?
Click to expand...
Click to collapse
Aha, found them thanks to the awesomeness of Ausdroid!
http://ausdroid.net/apns/
^ use those to find the APNs for all aussie networks once you've flashed a new firmware. Make sure you have wifi turned off when you enter the info, and once the settings are in press menu -> save and within a few seconds the 3G icon in the notification bar appeared.
First off thanks to the developers who made this happen awesome stuff.
I have a couple questions,
1.
i did the flash and all and with set up i get English(spain), English(uk) but no english(usa) is there something i did wron on the setup?
2.
Im stuck on H on top of my info bar is there a way to get 3g?
3.
last question are these the setting to have MMS work? i can send a pic, but not recieve one
uSED A LITTLE ELBOW GREASE (search bar on this website) AND GOT IT WORKING .
anyways thanks ahead of time
n0re781 said:
1.
i did the flash and all and with set up i get English(spain), English(uk) but no english(usa) is there something i did wron on the setup?
Click to expand...
Click to collapse
Is this a problem...really?
n0re781 said:
2.
Im stuck on H on top of my info bar is there a way to get 3g?
Click to expand...
Click to collapse
H is better than 3g. Read: http://en.wikipedia.org/wiki/High-Speed_Downlink_Packet_Access
n0re781 said:
3.
last question are these the setting to have MMS work? i can send a pic, but not recieve one
Click to expand...
Click to collapse
Speak with T-Mobile. MMS issues regularly relate to the service provider. You should ask them to remove then re-add your MMS capabilities on their servers and to be safer you should create your APN settings based on the info on their website.
What build? Cyanogenmod builds or modified sense builds (like cmys) include the files needed for mms to work correctly on tmous.. they've been working great for me don't even have to enter the apn.
Swyped from my Cyanogenmodded HD2
dkl_uk said:
Is this a problem...really?
H is better than 3g. Read: [[/url]
Speak with T-Mobile. MMS issues regularly relate to the service provider. You should ask them to remove then re-add your MMS capabilities on their servers and to be safer you should create your APN settings based on the info on their website.
Click to expand...
Click to collapse
well i only ask cuz i noticed when i whent on my google maps it would directly take me to spain, italy,..etc no big issue just wondering if some one else had an issue. =)
Good to know, im just use to seeing 3G.
i will check the website for specific APN thanks
squish099 said:
What build? Cyanogenmod builds or modified sense builds (like cmys) include the files needed for mms to work correctly on tmous.. they've been working great for me don't even have to enter the apn.
Swyped from my Cyanogenmodded HD2
Click to expand...
Click to collapse
its used with cotulla, htc desire a8.. (sorry dont know whats the cyan or the sense build)
n0re781 said:
well i only ask cuz i noticed when i whent on my google maps it would directly take me to spain, italy,..etc no big issue just wondering if some one else had an issue. =)
Click to expand...
Click to collapse
So your location was taking you to the wrong country? I had that issue on an iPhone 3, hence I only ever had an iPhone for a week before returning to HTC products.
The English settings won't affect your location. Google maps will first ascertain where your location is based on WiFi and then GPS. WiFi will inherently be quicker because it doesn't need a lock. I would suggest turning WiFi off for now, are you using a proxy or Tor network direct through your router? That would suggest why it thinks you're in another country. If it's your GPS then that is an entirely different issue and you will want to read this thread:
http://forum.xda-developers.com/showthread.php?t=953630
dkl_uk said:
So your location was taking you to the wrong country? I had that issue on an iPhone 3, hence I only ever had an iPhone for a week before returning to HTC products.
The English settings won't affect your location. Google maps will first ascertain where your location is based on WiFi and then GPS. WiFi will inherently be quicker because it doesn't need a lock. I would suggest turning WiFi off for now, are you using a proxy or Tor network direct through your router? That would suggest why it thinks you're in another country. If it's your GPS then that is an entirely different issue and you will want to read this thread:
http://forum.xda-developers.com/showthread.php?t=953630
Click to expand...
Click to collapse
GPS is working.
i recallr y i mentiond the issue with the english(uk), english(spain) when i get on youtube it goes to youtube(spain).
english(Uk) is almost same as english(usa) ... : )
p0fker said:
english(Uk) is almost same as english(usa) ... : )
Click to expand...
Click to collapse
LOL it is is why is there an option to pick english(uk), english(spain), enlgish(italian).
not a big deal i figuerd it out already. o well either way im happy with my htc hd2/desire. =)
Guys plz help i installed cyanogenmod 7 .....in hd2....the problem is with the screen resolution...its smalll i mean the keypad....etc...wats the remedy thanks in advance
Being a noob I am not allowed to post on the development forums...........
last night I upped my Galaxy Tab (Thai ROM) to Gengerbread 2.3.6 and Acudroid V3 ICS Themed.
1st I would like to comment about the instructions and the process:
My Tab is an important work tool for me - and I was a bit worried about bricking it and taking days to recover... BUT - I followed the instructions of Acubens - and where pointed to teamovercome.net kept following their instructions to the letter, and happily after a couple of hours my Tab was running 2.3.3 with teamover's ROM and later 2.3.6 with the Acudroid V3 ROM.
Restoring apps + data was fast and easy using Titanium and very soon I had my phone up and running just like I want it
As far as I can tell so far - seems everything is working fine - phone calls, sms, camera, email, GPS, wifi, GPRS, sounds and notofocations. As I didn't see and speed improvement I downloaded and installed no-frills CPU and overclocked the CPU to 1.2GHz - and now the Tab is FLYING.......
Now that I've done the up and ROM change - I hope to see more new ROMs for the TAB
mebkk said:
Being a noob I am not allowed to post on the development forums...........
last night I upped my Galaxy Tab (Thai ROM) to Gengerbread 2.3.6 and Acudroid V3 ICS Themed.
CUT
Click to expand...
Click to collapse
ROM looks nice, I'm a noob too, would love to try Accudroid. Am using Hyperdroid right now. How's the battery life with Accudroid? Is it good?
mebkk said:
Being a noob I am not allowed to post on the development forums...........
last night I upped my Galaxy Tab (Thai ROM) to Gengerbread 2.3.6 and Acudroid V3 ICS Themed.
1st I would like to comment about the instructions and the process:
My Tab is an important work tool for me - and I was a bit worried about bricking it and taking days to recover... BUT - I followed the instructions of Acubens - and where pointed to teamovercome.net kept following their instructions to the letter, and happily after a couple of hours my Tab was running 2.3.3 with teamover's ROM and later 2.3.6 with the Acudroid V3 ROM.
Restoring apps + data was fast and easy using Titanium and very soon I had my phone up and running just like I want it
As far as I can tell so far - seems everything is working fine - phone calls, sms, camera, email, GPS, wifi, GPRS, sounds and notofocations. As I didn't see and speed improvement I downloaded and installed no-frills CPU and overclocked the CPU to 1.2GHz - and now the Tab is FLYING.......
Now that I've done the up and ROM change - I hope to see more new ROMs for the TAB
Click to expand...
Click to collapse
Thanks for put up this thread for new members of XDA, its good to hear you like the rom, if anybody has a problem or a question please post and ask here i will monitor this thread so i can assist if needed.
Cheers
---------- Post added at 12:15 PM ---------- Previous post was at 12:11 PM ----------
wuf31 said:
ROM looks nice, I'm a noob too, would love to try Accudroid. Am using Hyperdroid right now. How's the battery life with Accudroid? Is it good?
Click to expand...
Click to collapse
Battery performance is good same as any other rom with the same tweaks applied.
Cheers
Small Issues
acubens said:
Thanks for put up this thread for new members of XDA, its good to hear you like the rom, if anybody has a problem or a question please post and ask here i will monitor this thread so i can assist if needed.
Cheers
Click to expand...
Click to collapse
So far 2 small issues I came accross -
1. Some notification sounds are not right - i had chrome2phone app and instead of just a short bip like it used to be - it was a non stop bipping for about 15 minutes. I removed the app and try to re-install only I can install it now for some reson. I installed for now the "browser 2 droid" instead, but the notification sound is the same 15 minutes non stop bipping...
Don't get sound notifications for "what's up", and on Gtasks. Probably some other apps that I didn't notice so far.
2. On some of the menus the text under the icons is white over white so can't see it before actually pressing it...
as for battery life - seems a shorter than the stock ROM I used before, but that might be becuase I play with the phone a bit more now...
mebkk said:
So far 2 small issues I came accross -
1. Some notification sounds are not right - i had chrome2phone app and instead of just a short bip like it used to be - it was a non stop bipping for about 15 minutes. I removed the app and try to re-install only I can install it now for some reson. I installed for now the "browser 2 droid" instead, but the notification sound is the same 15 minutes non stop bipping...
Don't get sound notifications for "what's up", and on Gtasks. Probably some other apps that I didn't notice so far.
2. On some of the menus the text under the icons is white over white so can't see it before actually pressing it...
as for battery life - seems a shorter than the stock ROM I used before, but that might be becuase I play with the phone a bit more now...
Click to expand...
Click to collapse
** I just saw you already answered for the menus problem. I am downloading the update right now... **
hi acubens,
right now i am using v3.1, but u already update to v3.1.1 wipe version.my question:
-why dont hav no wipe version?
-if i update to v3.1.1 wipe version, all my data & software missing?
MAAAG said:
hi acubens,
right now i am using v3.1, but u already update to v3.1.1 wipe version.my question:
-why dont hav no wipe version?
-if i update to v3.1.1 wipe version, all my data & software missing?
Click to expand...
Click to collapse
Hi,
To reduce the issues i only make wipe versions from now on, and nowipe will not be available. I know it is some work but see it this way i have a lot of work to make the rom available, so all i ask from you if you like to use the rom to make an backup and flash a wipe version and it is worth the trouble i think.
Cheers
---------- Post added at 09:17 AM ---------- Previous post was at 09:14 AM ----------
mebkk said:
So far 2 small issues I came accross -
1. Some notification sounds are not right - i had chrome2phone app and instead of just a short bip like it used to be - it was a non stop bipping for about 15 minutes. I removed the app and try to re-install only I can install it now for some reson. I installed for now the "browser 2 droid" instead, but the notification sound is the same 15 minutes non stop bipping...
Don't get sound notifications for "what's up", and on Gtasks. Probably some other apps that I didn't notice so far.
2. On some of the menus the text under the icons is white over white so can't see it before actually pressing it...
as for battery life - seems a shorter than the stock ROM I used before, but that might be becuase I play with the phone a bit more now...
Click to expand...
Click to collapse
Hi, i will look into the sound problem you have, maybe those apps uses the default sound scheme of gingerbread and i have change that, so can you tell which sound they use of the system? And can you not change the settings in that app to use other sounds?
Menu is fixed as you noticed already,
If i have an update for your sound issue i will let you know..
Cheers
acubens said:
Hi, i will look into the sound problem you have, maybe those apps uses the default sound scheme of gingerbread and i have change that, so can you tell wich sound they use of the system? And can you not change the settings in that app to use other sounds?
Menu is fixed as you noticed already,
If i have an update for your sound issue i will let you know..
Cheers
Click to expand...
Click to collapse
there is no setting menus for those 2 apps so can't change anything. The chrome2phone was working fine on my original ROM (froyo)
isn`t there is Android 2.3.7 for the galaxy tab
can you use it in the next update?
but i think this is a great job you`ve done
almotssem said:
isn`t there is Android 2.3.7 for the galaxy tab
can you use it in the next update?
but i think this is a great job you`ve done
Click to expand...
Click to collapse
2.3.7 is not available for our TAB, and i dont know if 2.3.7 will be available soon or at all but if it is i will make a rom if possible.
Cheers
mebkk said:
there is no setting menus for those 2 apps so can't change anything. The chrome2phone was working fine on my original ROM (froyo)
Click to expand...
Click to collapse
I have looked into this and it seems to be made for Froyo and not for gingerbread so it is not supported when you using gingerbread, sorry
Cheers
Hi Acubens,
I notice that long press power button menu (aka Device Options) doesn't offer reboot options.
can you make that for us?
Thanks for the nice ROM.
Sent from my GT-P1000 using XDA App
priyana said:
Hi Acubens,
I notice that long press power button menu (aka Device Options) doesn't offer reboot options.
can you make that for us?
Thanks for the nice ROM.
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
Hi,
Sorry but no, i included a app called quickboot, this app shutdown or reboot your tab much faster, and you do not have to use a mechanical button that can be outworn if you use it much.
Cheers
Got it. Thanks anyway!
mebkk said:
there is no setting menus for those 2 apps so can't change anything. The chrome2phone was working fine on my original ROM (froyo)
Click to expand...
Click to collapse
I looked for a solution and seems there is none... many users complain about the notification sound, some also mention it lasts forever (like mine...), but no 1 mention what version of Android they are using http://code.google.com/p/chrometophone/issues/detail?id=239 . It worked fine on froyo - short sound and thats it. so probably some changes between froyo and GB cuases the problem. Only way to stop the sound is by forceclosing the app
mebkk said:
I looked for a solution and seems there is none... many users complain about the notification sound, some also mention it lasts forever (like mine...), but no 1 mention what version of Android they are using http://code.google.com/p/chrometophone/issues/detail?id=239 . It worked fine on froyo - short sound and thats it. so probably some changes between froyo and GB cuases the problem. Only way to stop the sound is by forceclosing the app
Click to expand...
Click to collapse
Hi,
Thanks for the feedback on the issue you have, it will probably never work as it is made for froyo and not for gingerbread.
Cheers
WIFI
It seems I have a problem with the WIFI scanning. It only scans when I reconnect the WIFI. If I go out of the WIFI area the tab goes on EDGE as should be, but when coming into a WIFI area it wont show it nor connect to it unless I stop WIFI service and start again. Didn't have this problem on V3... Anyone else got this problem? any solution?
mebkk said:
It seems I have a problem with the WIFI scanning. It only scans when I reconnect the WIFI. If I go out of the WIFI area the tab goes on EDGE as should be, but when coming into a WIFI area it wont show it nor connect to it unless I stop WIFI service and start again. Didn't have this problem on V3... Anyone else got this problem? any solution?
Click to expand...
Click to collapse
Hi,
Wifi scanning is set for 180 seconds to save battery, if you like to change that you can install rootexplorer and change settings in build.prop or delete the complete line and save it.
Cheers
Change the build.prop file
acubens said:
Hi,
Wifi scanning is set for 180 seconds to save battery, if you like to change that you can unstall rootexplorer and change settings in build.prop or delete the complete line and save it.
Cheers
Click to expand...
Click to collapse
Changed it to 45 - hope it fixed the probel (will see next time I leave the office).
For the benefit of other noob's (it took me a while to find out how to do it...) here's how I managed the change step by step:
1. Used Rom Toolbox / scripter / Mount System Read Write / Run
2. Used Root Explorer to go to /system/build.prop << Long press on the file name and change permissions to rwrwrw
3. Used Astro to open the file (long press, select open as / text << select astro's text editor), located the line I wanted to change [wifi.supplicant_scan_interval=180], changed the value, saved
4. Used Root Explorer to go to /system/build.prop << Long press on the file name and change permissions to rwr-r-
5. Used Rom Toolbox / scripter / Mount System Read Only / Run
6. Reboot system
Careful not to change something you are not sure about as you might brick the phone....
use ES File Explorer.
Just make sure you go to its setting, Root Option and enable its Root Explorer and Mount File System.
Then you can browse to "Favourite" and select the "/"
and go to systems and edit the build.prop using its own internal ES Edit note, and it even make a backup of the original file for you.
A lot less step than what you needed to do there.
Deleted
Changelogs
Deleted
Kernel
Kernel
Features
Swap
Overclock up to 1000 MHz
Tun
Undervolt
O3 flag
Blur fix
Some new governors
Improved Camera
Improved wlan drivers
Thanks:
> Cyanogen.inc for Cm9 kernel I used as base
> Gellmar for a charger and msc fixes and sdmerge
> Qcom for the great Soc and a some help
> CodeAurora Forum for many hacks and mods for msm7x25a
If someone ask me why I don't want that my work is used, it means that you don't know xda rules so here i report the #12 that explain the sharing policy for both rom and kernel.
Cyanoid kernel is for cyanoid rom only.
XDA Rule #12. Using the work of others.
If you are developing something that is based on the work of another Member, you MUST first seek their permission and you must give credit to the member whose work you used. If a dispute occurs about who developed / created a piece of work, first try to settle the matter by private message and NOT in open forum. If this fails, you may then contact a Moderator and provide clear evidence that the work was created by you.
Convincing evidence will result in the copied work being removed. If there is no clear evidence that it was you who created the work, then in the spirit of sharing, all work will remain posted on the forums.
As an addition, developers have the right to hold exclusivity over their work for as long as it is deemed necessary by that developer. However, if the work is claimed as exclusive, it must remain as such. No selective sharing will be allowed (ie, allowing certain people to use it and not others). Should the developer decide to start sharing the work with others, the work automatically becomes fair game for all to use, albeit with the relative credit displayed.
In regard to permissions, the same rules apply for this but if permission was already given and unless there is a very valid reason, it cannot be revoked (same applies to major updates on the work). Under that same premise, permissions cannot be denied unless the work is exclusive or under extreme circumstances.
In plain English: If you want to keep your work exclusive, go for it. However, if you are going to share your work, do it fairly.
These rules apply to all software posted on XDA (including but not limited to ROMs, RUUs, apps, games, kernels, themes, icons, etc) unless that software comes with a license that waives these rules.
Click to expand...
Click to collapse
Screenshots
Deleted
holy kanging.........
★★★[jellycast_forever]★★★
emokeizer said:
holy kanging.........
★★★[jellycast_forever]★★★
Click to expand...
Click to collapse
What do you mean?
that systemui is @emokeizer's work..you should at least give credits
eyesore123 said:
that systemui is @emokeizer's work..you should at least give credits
Click to expand...
Click to collapse
This status bar isn't his work. I gave the credit to the developer on the website.
Inviato dal mio Nexus 7 usando Tapatalk 4
wifi tethering really works? impressive I don't think anyone's fixed that yet on ICS for this device or is there some other workaround that I don't know about? also wow I never seen a installer with a custom gui/touchscreen controls like this this is pretty cool. love the installation percentage meter too!
ok super brief testing theres a bug on first boot the back to home button won't work at all but restarting the phone fixes that.
and a continuous bug that seems to be on all custom roms I've tried whenever I use my Amaysim brand sim card on a custom rom it says the carrier is "Yes Optus" which is the owner of the network im on but they resell to Amaysim and so Amaysim's name should be coming up but since it isn't or for some other reason the APN fields are blank and trying to add to it, it won't save a APN so I can't get any mobile data at all. Phone calls and Texts will still work oddly.
But if I use this same sim card on my phone with stock gingerbread I can get data and it will say Amaysim as my carrier weird problem right?
If I use another simcard that's not Amaysim like Telstra (different operator) it works fine and mobile data will work.
Interesting rom I'll keep testing.
Scaregdearimasu said:
wifi tethering really works? impressive I don't think anyone's fixed that yet on ICS for this device or is there some other workaround that I don't know about? also wow I never seen a installer with a custom gui/touchscreen controls like this this is pretty cool. love the installation percentage meter too!
ok super brief testing theres a bug on first boot the back to home button won't work at all but restarting the phone fixes that.
and a continuous bug that seems to be on all custom roms I've tried whenever I use my Amaysim brand sim card on a custom rom it says the carrier is "Yes Optus" which is the owner of the network im on but they resell to Amaysim and so Amaysim's name should be coming up but since it isn't or for some other reason the APN fields are blank and trying to add to it, it won't save a APN so I can't get any mobile data at all. Phone calls and Texts will still work oddly.
But if I use this same sim card on my phone with stock gingerbread I can get data and it will say Amaysim as my carrier weird problem right?
If I use another simcard that's not Amaysim like Telstra (different operator) it works fine and mobile data will work.
Interesting rom I'll keep testing.
Click to expand...
Click to collapse
You must do a dlavik cache, for fix this home key problem, WiFi thering is working but u have to reinstall yhe thering app (system/app)
Sent from my Mi2s
linuxxxx said:
You must do a dlavik cache, for fix this home key problem, WiFi thering is working but u have to reinstall yhe thering app (system/app)
Sent from my Mi2s
Click to expand...
Click to collapse
I always clear Dalvik cache before installing a new rom but still the home key wouldn't work but all I did was restart/reboot and that fixed it.
Very cool if I get that APN/carrier issue solved I'll try out the tethering.
thanks for your response.
Scaregdearimasu said:
I always clear Dalvik cache before installing a new rom but still the home key wouldn't work but all I did was restart/reboot and that fixed it.
Very cool if I get that APN/carrier issue solved I'll try out the tethering.
thanks for your response.
Click to expand...
Click to collapse
You must follow the last part of the install video i show how to fix this, u can change ur carrier name in systemui settings, for apns when you chance somwthing press menu button and click save
Sent from my Mi2s
linuxxxx said:
You must do a dlavik cache, for fix this home key problem, WiFi thering is working but u have to reinstall yhe thering app (system/app)
Sent from my Mi2s
Click to expand...
Click to collapse
linuxxxx said:
You must follow the last part of the install video i show how to fix this, u van change ur carrier name in systemui settings, for apns when u chance somwthing press menu button and click save
Sent from my Mi2s
Click to expand...
Click to collapse
I'll make a video for you tomorrow showing you what I mean.
I know how to save apns it's just after I click save it does nothing.
I don't think the carrier name is a problem I just think it's a symptom of something else being an issue. Yes there is a way to change the carrier name to whatever I want it to be but I doubt that'll allow me to start using mobile data.
Scaregdearimasu said:
I'll make a video for you tomorrow showing you what I mean.
I know how to save apns it's just after I click save it does nothing.
I don't think the carrier name is a problem I just think it's a symptom of something else being an issue. Yes there is a way to change the carrier name to whatever I want it to be but I doubt that'll allow me to start using mobile data.
Click to expand...
Click to collapse
OK i checked, so do i have this problem, it show me 'Hutchinson 3g' intestead 3 ITA. It's an aosp setting
Sent from my Mi2s
linuxxxx said:
OK i checked, so do i have this problem, it show me 'Hutchinson 3g' intestead 3 ITA. It's an aosp setting
Sent from my Mi2s
Click to expand...
Click to collapse
Does that block you from using mobile data and are default apn settings showing up?
So since it's a Aosp setting any idea on how to fix it to enable data usage? seems weird how it's only occurring on some sims.
Scaregdearimasu said:
Does that block you from using mobile data and are default apn settings showing up?
So since it's a Aosp setting any idea on how to fix it to enable data usage? seems weird how it's only occurring on some sims.
Click to expand...
Click to collapse
Try, it worked for me
Sent from my Mi2s
linuxxxx said:
Try, it worked for me
Sent from my Mi2s
Click to expand...
Click to collapse
If by Aosp settings you mean Quick notifications panel settings for "change Carrier Label" yeah no that doesn't fix the APN issue.
Here I took a video for you It shows my Amaysim Sim card going in but Shows Yes Optus and no ability to save an APN or use Data.
and it shows I can use a vodaphone sim with mobile data and it has default apn already on it. no clue why one works and the other doesn't
anyway heres the video youtube should be cutting out the shaky-ness of it but if you catch it too soon you see it all shaky sorry about that.
https://www.youtube.com/watch?v=z4d_8BhEsr8
Scaregdearimasu said:
If by Aosp settings you mean Quick notifications panel settings for "change Carrier Label" yeah no that doesn't fix the APN issue.
Here I took a video for you It shows my Amaysim Sim card going in but Shows Yes Optus and no ability to save an APN or use Data.
and it shows I can use a vodaphone sim with mobile data and it has default apn already on it. no clue why one works and the other doesn't
anyway heres the video youtube should be cutting out the shaky-ness of it but if you catch it too soon you see it all shaky sorry about that.
https://www.youtube.com/watch?v=z4d_8BhEsr8
Click to expand...
Click to collapse
Have u try using operator name? Or can u use an auto_config SMS? (This will depend by your operator) is this phone brand?
Build 8 relased for the 1000 post on the androidiani.com forum!!!
Inviato dal mio Nexus 7 usando Tapatalk 4
Scaregdearimasu said:
If by Aosp settings you mean Quick notifications panel settings for "change Carrier Label" yeah no that doesn't fix the APN issue.
Here I took a video for you It shows my Amaysim Sim card going in but Shows Yes Optus and no ability to save an APN or use Data.
and it shows I can use a vodaphone sim with mobile data and it has default apn already on it. no clue why one works and the other doesn't
anyway heres the video youtube should be cutting out the shaky-ness of it but if you catch it too soon you see it all shaky sorry about that.
https://www.youtube.com/watch?v=z4d_8BhEsr8
Click to expand...
Click to collapse
I watched the video it look like a SIM problem, try tour SIM on another phone or contact your provider
Inviato dal mio Nexus 7 usando Tapatalk 4
Original tread
Update diary
2016-06-14 Second Edition :
1 , repair some telecom cards can not be selected LTE / CDMA mode data can not only cause problems call
2 , repair telecommunications card can not choose apn problems
3 , double-click Add wake-up function in "Settings" - "Display & Indicators" , the default is on
4, open to prevent accidental wake
4 , the latest official source synchronous CM13
PS: There are user feedback wifi unstable , sometimes not properly connected , I have no experience , temporarily unable to resolve debugging
Has brushed the first edition of the user , the second edition of the brush do not need three clear / Four Clean operation , directly into the brush to
Update diary
1,2016-06-12 first edition , self-test functions are OK, welcome feedback !
download link
Mirror + screenshots
All credits belong to the original developer I'm just sharing it here
Everything seems to be working well but the connections (Wifi/Mobile network) seems to connect a little slow
Really good enough for a daily driver
On the side note there's like 4 chinese apps that i don't know what they do
Great to see some development happening, but I'm going to wait for a "clean" cm13 or some another ROM...
scarletnokarasu said:
Everything seems to be working well but the connections (Wifi/Mobile network) seems to connect a little slow
Really good enough for a daily driver
On the side note there's like 4 chinese apps that i don't know what they do
Click to expand...
Click to collapse
These are the Chinese Market, Movie, Weather and Browser. They are save to remove. In recovery file manager browse to /system/priv-app and delete 4 folders Market, Movie, Weather and Webview. Clear dalvik and reboot. And...
mcgangsta said:
Great to see some development happening, but I'm going to wait for a "clean" cm13 or some another ROM...
Click to expand...
Click to collapse
... it looks "clean" as official CM13 to me so far.
Battery life / screen on time has been a lot better for me on this. The only thing that doesn't work for me is filming with the google camera.
looks like the original thread got removed in the miui forums for some reason
scarletnokarasu said:
looks like the original thread got removed in the miui forums for some reason
Click to expand...
Click to collapse
Don't like the competition maybe...?
Nope. It still there.
Baidu-Link is down ...
any one confirm about fingerprint is working ???
mrevilking said:
any one confirm about fingerprint is working ???
Click to expand...
Click to collapse
Works nice and very fast recognition.
[email protected] said:
Baidu-Link is down ...
Click to expand...
Click to collapse
use the mirror https://drive.google.com/folderview?id=0B-W-PFSvgML0ZzVzQ3F4WlFZOVU&usp=sharing
cm-13.0-20160614-UNOFFICIAL-hydrogen
Dual SIM working?
Is the dual SIM on the device working on this ROM?
Any changelog for the 6/14 release? Fixes...?
Update diary
2016-06-14 Second Edition:
1, repair some telecom cards can not be selected LTE / CDMA mode data can not only cause problems call
2, repair telecommunications card can not choose apn problems
3, double-click Add wake-up function in "Settings" - "Display & Indicators", the default is on
4, open to prevent accidental wake
4, the latest official source synchronous CM13
PS: There are user feedback wifi unstable, sometimes not properly connected, I have no experience, temporarily unable to resolve debugging
Has brushed the first edition of the user, the second edition of the brush do not need three clear / Four Clean operation, directly into the brush to
Click to expand...
Click to collapse
from miui forum
I thought the thread was closed. I should've check it before asking... Thanks for posting it.
I had that problem with WiFi not obtaining IP address in DHCP mode but after some time the problem went away btw
Hello
Any one can translate the post into English because i did not understand anything when i used google translate
mrevilking said:
Hello
Any one can translate the post into English because i did not understand anything when i used google translate
Click to expand...
Click to collapse
Once you get that key word "brush" = "install/flash" everything starts to make sense...
Hi all, how about battery life when comparing CM13 with stock rom? Thanks.