Hi there.
Just wandering.. I use Win7 Ult. 64-bit. And when I connect my HD2, it appears as an uknown device "Generic Serial" in device manager.
Trying to uninstall it, remove it, and restart pc, but doesn`t help.
Does anyone know how to fix this?
EDIT: Never mind. Win7 Ult. 64-bit does not come with "Windows Mobile Decvice Center" Dowloading latest WMDC (6.1 for 64-bit) solved the problem.
Sorry about the unnecessary post
Thank you
regards
Ztonez
Install, if it is "Generic Serial" run Windows Update. It downloads and install update and after reboot it´ll be OK
I don't have the "Generic serial" but have a "Bluetooth periferal device" with the yellow mark on it in my Win7 / HD2 installation, which I can not solve by running windows update.
Anyone has any ideas on hoy to fix that?
Posible fx
Try this:
Disconnect HD2 from PC, reboot pc
On de the HD2 go into settings -> connections -> USB to PC
UNcheck the "faster connection" thingy under active sync.
Press OK and when PC is rebooted connect the HD2 to an USB port you havent connected the HD2 to yet or use bluetooth. Make sure you have the lastest async/mob dev cent running.
let us know if it works
Hello! I have win7 64 installed an I have been facing connection problems with various versions of Kies (the classic case where the phone says "connected" and kies still says (forever) "connecting".
Assuming that you usb drivers are ok then the probable solution could be the following:
DO NOT open Kies.
Connect SGS with USB to your PC and select kies connection.
Wait a few seconds (in order for the pc to recognise the SGS)
Then open Kies.
My discovery was made as follows:
I had opened the device manager in order to check whether my drivers were updated. When the phone was not connect there was no MTP connection / no SGS (normally it is under "Portable Devices Category". If. however, you connect the SGS as above, then this category (and SGS) will appear in the device manager. (You can see it appearing).
Now, if you open Kies first and then connect your SGS you will see that SGS appears in the device manager but had the usual error icon on it. Possibly having kies open interferes somehow with the drivers.
Hope this help, tell me if it worked...
Right click Kies taskbar icon and unclick "Auto start Kies"
Evans_Prophet said:
Hello! I have win7 64 installed an I have been facing connection problems with various versions of Kies (the classic case where the phone says "connected" and kies still says (forever) "connecting".
Assuming that you usb drivers are ok then the probable solution could be the following:
DO NOT open Kies.
Connect SGS with USB to your PC and select kies connection.
Wait a few seconds (in order for the pc to recognise the SGS)
Then open Kies.
My discovery was made as follows:
I had opened the device manager in order to check whether my drivers were updated. When the phone was not connect there was no MTP connection / no SGS (normally it is under "Portable Devices Category". If. however, you connect the SGS as above, then this category (and SGS) will appear in the device manager. (You can see it appearing).
Now, if you open Kies first and then connect your SGS you will see that SGS appears in the device manager but had the usual error icon on it. Possibly having kies open interferes somehow with the drivers.
Hope this help, tell me if it worked...
Click to expand...
Click to collapse
Nothing happen on my PC after plug my SGS, and of course Kies cannot detect my phone. I used Windows 7 x64. Test on 3 PCs (2 PCs used Windows 7 x64, 1 PC used Vista x86), same problem.
Don't expect the pc to do something (the device will only appears in "devices" under the control panel).
Make sure that KIes is off when you first connect your SGS and that "kies connection" is selected in the SGS (despite the fact that you have not launched Kies yet).
i.e.:
1. close kies
2. connect sgs to pc usb
3. select "kies" connection in SGS (make sure developer mode etc are off, ask on connection on)
4. Wait a few seconds
5. launch kies
6. ???
7. Connnect
I have Kies 2.0 on Win XP SP3 with all drivers and SGS with Froyo 2.2.1 XXJPU
I've tried everything mensioned above. Nothing works, Kies says Connecting... and no connecton is established. The device works ok as a mass storage device, though, but I need to sync contacts. Any ideas?
Thanks.
You could use google contacts to sync. Or export/import contacts as vcf file in contacts app(menu export/import).
Try also all usb ports, i find that some work better than others, possibly best should be the one you did the first installation on.
Sent from my GT-I9000 using Tapatalk
Hello,
recently I bought an i5800 (android 2.1-update 1), because I wanted to have rooted phone, I read informations about this on couple sites.
I decided to use z4root.
Now when I connecting my phon to the PC kies shows only Phone+Contacts.
Doesent show any data on the SD, and also doesn't show any informations about version of firmware...
How can I fix this?
Best Regards
v
PS: I also installed Link2SD, AppsToSD and Titanium Backup
update to latest version of kies and also un-install the USB drivers from device manager -> disconnect phone and connect it to other USB port open kies and the driver should install again hope this can fix your problem
Nope, that doesn't work either
Kies updated to 2.0.0.11032_12...
On the phone USB Debug mode disabled, USB Options-> ~Ask after connection.
Kies still does not sees properly the phone, and phone does not shows the window with options Kies,~media player, ~mass storage.....
I had exactly the same (infuriating) problem.
I fixed mine by uninstalling Kies, uninstalling the USB drivers then installing java (I know this shouldn't make a difference, but it seemed to).
I was using Windows 7 64 bit.
I found the Samsung_USB_drivers_for_mobile_phones.exe file & saved this to my desktop (before uninstalling).
I think Kies saves it to program files x86/samsung/kies/usb drivers/
Then after uninstall of everything, then installing java,
right click on the driver and run as an administrator.
When it asks where to install it, place it in the /program files/samsung/kies/usb drivers/ folder (not the x86 version, install it to the normal one).
Then find the Kies install file and right click that & install as an administrator to, but let Kies install this to the x86 program files location (default).
Then when it's completely installed (skip finding media, you can do that later), turn off the phone, then connect it to the USB cable.
Then turn the phone ON and let the drivers install as normal.
Just let it do it's thing and after a while, after all installations are complete, Kies will show your phone & will let you see all the folders, not just the contacts list & will show you the firmware version and everything.
Hope this helps.
I made sure I 'ran as administrator' on both install files.
Not sure which bit helped, but it worked for me (and I've tried everything, believe me)
*EDIT*
google "Why does Samsung Kies not detect my Samsung mobile phone" for the same info
**EDIT** x2
on looking in my /progam files x86/samsung/kis/usb drivers folder, it sems that Kies has reapplied the driver there & removed it from the 64 bit program files path. Ether way, one of the above steps fixed it, perhaps it's just that I ran everything ad an admin, who knows ?
Installation of java wouldn't make any difference, unless the installer was java based. The admin rights might have done the trick.
Sent from my GT-I5801 using XDA App
Actually, ignore my last post.
Kies now cannot see my Galaxy Apollo anymore, (even though every other program on my PC can !! including WMP12 !!)
I'm sick of this.
What's so hard about detecting a connected device ? !!
Sorry for the rant, but I'm getting really annoyed by this piece of software (Grrr !)
Yeah, I do whay you write, it's the same on my pc... now everything is .. not working
I think it's not only a Kies problem+USB drivers but also system on the phon has been changed thats why my phone is not properly working with kies.
Of course, still when I trying to connect my phone to pc I don't see on my phone screen options window that was before z4root/app2sd/link2sd - I mean Kies, media, storage
I see that there is a problem with a part of the Kies - DeviceManager is crashing after phone connecting..
Well now, the only way I can connect, is by (control panel) > uninstall programs > uninstall SAMSUNG USB drivers.
(while the phone is NOT connected).
Then launch Kies.
Then select the menu (tools > install driver)
Then wait while it installs the drivers (again !!)
After waiting for about a minute, I reconnect my GT-I5800 to my PC via the (not so universal) USB cable.
I then wait till all the (your device has been installed) messages stop.
Then I have normal Kies control of my Apollo.
But, if I disconnect it, then try to reconnect it, I get no joy.
It will sit at "connecting" forever.
The only way I can reconnect, is to rinse & repeat.
(I.E. uninstall the drivers & 'GOTO 10', which is really starting to boil my p!ss as I have no idea why this is happening).
Every single piece of poo software on my PC can see my phone, except Kies.
Does anyone have any ideas as it'd driving me mad !! :`(
try this
uninstall kies and all samsung drivers from ur pc
goto download mode (does not need root & it's safe)-(do not open odin)
a list of 3-5 drivers will get installed
then unplug the device, remove and re-insert the battery
install kies then connect ur phone by the usual way
I have the same problem with my phone. An other i5800 can connect successfully with my laptop, KIES and the same cable, but my phone doesn't.
It works...
what I've done....
Back to factory settings in the phone... so just great, the best corrective actions that I ever had :/
I want my HTC Uni back...
*edit*
Kies works 100% ok eaven now sees the update to froyo
so problem was changes that was made by one of the additional software on the phone
Thread can b closed
I also had this problem from long time. I found the reason was the Kies (both 1.5xx and 2.XX) versions are unable to use the default USB driver thats come along with Windows OS.
So the best solution is uninstall the USB driver from Windows device manager and after that install the USB driver from Kies. Then definitely your phone will be recoginized with Kies.
Note: After Uninstalling USB driver and before installing the USB driver from Kies sometimes windows itself tries to install the default USB driver so disable it when its promted.
Hope this helps....
vvviii said:
Nope, that doesn't work either
Kies updated to 2.0.0.11032_12...
On the phone USB Debug mode disabled, USB Options-> ~Ask after connection.
Kies still does not sees properly the phone, and phone does not shows the window with options Kies,~media player, ~mass storage.....
Click to expand...
Click to collapse
Install latest kies (clean install). Before connecting the phone to usb remove the SD card and start in kies. The phone would be detected and drivers would be installed. Disconnect, reinsert SD card and connect again. Problem will be solved. Worked for me.
When you turn on the computer miniUSB then the E900, it recognizes the USB drivers, Zune does not start automatically. When I run zune manuel says " No device connected". Someone that some information or instructions on how to solve the problem.
Which USB driver are you currently loading? use the MFG application to load MS Composite driver, reboot the phone then connect it, you'll find all the info how to fire up MFG and change the driver on this forum.
Hi
I am a new user for nexus 6p, For the first time I connected my device to Computer running windows 10 updated. My laptop didn't detect the usb and the driver is not installed properly, I tried downloading the latest usb driver but it didnt help , While searching for the driver folder it throws
Windows was unable to install your unkown drive
You can get the USB drivers straight from Google and try to uninstall/reinstall or download Wugfresh's NRT. There is very good driver installation tool and test to confirm you get both USB and fastboot drivers installed properly. Just follow the "Full Driver Installation Guide"
Tonyjaqs92 said:
Hi
I am a new user for nexus 6p, For the first time I connected my device to Computer running windows 10 updated. My laptop didn't detect the usb and the driver is not installed properly, I tried downloading the latest usb driver but it didnt help , While searching for the driver folder it throws
Windows was unable to install your unkown drive
Click to expand...
Click to collapse
Hi... Do you have ADB enabled in developer options? If you don't have developer options enabled, go in: settings>about phone and type 7 times on the build number, then go back in settings > developer options and enable "android debugging".
Plug your N6 on your computer, check your phone screen and allow press ok when it asks to "allow USB debugging".
Does it change something? Is your N6 recognized in device manager? Does the driver updates?
...
So My puter recognizes my phone fine....
Pop opened the configuration and General tab says:
This device is not configured correctly. (Code 1)
A service installation section in this INF is invalid.
To find a driver for this device, click Update Driver.
I try and update the driver using the "Let the puter search" feature and it finds one and tells me:
Windows encountered a problem installing the driver software for your device.
Windows found driver software for your device but encountered an error while attempting to install it.
MPE Device
A service installation section in this INF is invalid.
If you know the manufacturer of your device, you can visit its website and check the support section for driver software.
This is all AFTER I downloaded the latest Google USB drivers and unzipped them.
Phone is set to MTP mode and debugging mode is unlocked and usb debugging is on.
No Go.