I gained root and installed ClockworkMod Recovery. When I booted every process crashed so I selected wipe data/facory reset. Well now I only have the ClockworkMod Recovery and it will continuously load the 2 slash screens.
Before I cause anymore damage can anyone tell me how to go back to how it was from the factory?
You need to sbf from the bootloader if you didn't hose that by installing clockworkmod because it sounds like you didn't use koush's bootstrap to install it the way the D2 needs to have it installed. Please let me know if I'm wrong.
There are two tutorials for flashing the sbf one in windows and one in Linux but both have information worth knowing. I'd link them but I'm on my D2.
EDIT:
Windows.
Linux.
but you should read through BOTH of them before flashing.
Sent from my DROID2 using XDA App; Edited from a PC
p.s. I don't mean to criticize but a more informative thread title would be nice. If you had "Bootloop after ClockworkMod install" for a thread title that means more to me than "I need help".
Thank you that is a start. I really shouldn't have attempted this...
I got a critical error after I selected the sbf.
http://iamthewalcs.com/SBF Files and Update files/SBF File/Droid 2 Global FULL SBF.zip
I try to download that file but when I try and open it is says invalid.
Problem Solved I had to format everything first then do the steps listed.
Related
Ok guys, not sure if this should be in General or in here...
I am very new to Android but I'm loving it so far. I have my Epic rooted and I have the clockworkmod installed. I have download Tha Boss Rom V.02 to try out as my first ROM.
I just a few questions?
I have the ROM on my sd card and I renamed to update.zip(not sure if I needed to do that)... I then open up clockwork and hit update ROM from SD Card, point it at the update.zip.
It reboot and goes into the Android system recovery screen and starts to install the package. It gets to Verifying update package and stops and say:
E:failed to verify whole-file signature
E:signature verification failed
Installation aborted.
What am I doing wrong. Do I just have a bad file and maybe redownload it? I think I may try Andromeda Galaxy v1.0.3 next just to see if it's a file issue...
Thanks if you took the time to read this.
Solstone
Boot ypur phnoe into clockwork recovery (vol. down + camera + power) then select "install zip from SDcard". then "choose zip from SDcard" then select the update.zip file.
solstone said:
Ok guys, not sure if this should be in General or in here...
I am very new to Android but I'm loving it so far. I have my Epic rooted and I have the clockworkmod installed. I have download Tha Boss Rom V.02 to try out as my first ROM.
I just a few questions?
I have the ROM on my sd card and I renamed to update.zip(not sure if I needed to do that)... I then open up clockwork and hit update ROM from SD Card, point it at the update.zip.
It reboot and goes into the Android system recovery screen and starts to install the package. It gets to Verifying update package and stops and say:
E:failed to verify whole-file signature
E:signature verification failed
Installation aborted.
What am I doing wrong. Do I just have a bad file and maybe redownload it? I think I may try Andromeda Galaxy v1.0.3 next just to see if it's a file issue...
Thanks if you took the time to read this.
Solstone
Click to expand...
Click to collapse
This should be in the general forum- but are you sure you are getting the clockwork recovery- the screen should be green not blue- you can pm me for step by step help
jimmyz said:
This should be in the general forum- but are you sure you are getting the clockwork recovery- the screen should be green not blue- you can pm me for step by step help
Click to expand...
Click to collapse
ah the screen is blue... so maybe my clockworkmod is not working... i'll PM you... thx
please post everything you learned i cant boot to clockwork either.
I was able to get into the loading screen but I am getting the same error that it cant be verified
Did you use the voodoo touch wiz file?
Himmad said:
Did you use the voodoo touch wiz file?
Click to expand...
Click to collapse
i did use the vodoo touch... maybe i'll try the non touch one.
it seems like you guys dont have clockmod installed correctly. are you guys doing the one click method for root and clockmod? do any rooted apps work? dl rom manager from the market. use that to install the newest clockmod recovery. make sure you selet the samsung epic. use rom manger to boot into recovery? it should be green not blue
I was having a similar problem booting to cwm from rom manager. Rooted with one click 2.2.4 then one click clockwork final then installed rom manager. RM would not boot into cwm. Dled and flashed cwm from inside RM and still didn't work. I could get to it via the 3 button method. Next I flashed Mixup kernel and still had the same issue. Went back into RM and clicked DL Clockwork again and it instantly says its successful and now I can boot into cwm from RM.
Could somebody please make (or HAS somebody made) a guide that addresses the following two scenarios? I think it would go a LONG way towards encouraging others to experiment with the ROMs that are available now
1. My phone's rooted. I want to experiment and try out the available ROMs... but first, I want my phone backed up verbatim, so I can put everything back the way it was if things don't work out. What do I need to do?
2. I had fun trying out other ROMs, but for now I just want to put everything back the way it was before I started. I followed the instructions for #1. What do I need to do NOW?
Ok all this what I found was my problem. I believe it was Windows 7 64 bit. I tried to get clockworkmod running on my work machine that is windows 7 32bit and it worked like a champ. I actually decided to start from scratch and unrooted my phone, reapplied the DI07 update then rooted again, did the clockworkmod first try... then I did the last try.bat and rebooted and that seemed to work. I am doing a ROM back as I type this.
There is a good thread on it in the Epic Android Development forum called:
[TUTORIAL] Updating to DI07, Obtaining Root, and Flashing Custom Recovery [FIX]
I'd post a link, but I am a new user... and so no links in post
Hope this helps everyone.
Can someone post a link? I did use search, turned up a million (yes, I am exaggerating) threads but can't find this one.
Thanks.
nmoreman said:
Can someone post a link? I did use search, turned up a million (yes, I am exaggerating) threads but can't find this one.
Thanks.
Click to expand...
Click to collapse
Try this
should be it.
First off let me just say I wanted to post this in the thread but it said I haven't met some kind of requirement to post yet.
My question is I have read about rooting etc etc but being that this is my first time I didnt want to screw up so because Kaos's leak is pre rooted do I need to still root my phone or will this do it for me?
Sent from my SCH-I500 using XDA App
No, the ROM is pre-rooted already so you don't need to root once installed.
However, the ROM is installed through Clockwork Recovery, so that means that you need to have ROM Manager and Clockwork Recover Mod installed, which, will require that your phone is rooted..
You can find the threads in this forum that show you how to install all that..
When using ODIN, be sure to use "PDA" and not "Phone".. if you use Phone, you will end up with a paper weight...
Good luck!
You need to root your phone first
will not be able to install
Thanks!!!
Sent from my SCH-I500 using XDA App
How do I root a fascinate when it's on 2.1 update 1?
I believe you can flash CWM via download mode w/ Odin, and then flash the 2.2 leak+kernel with that, so technically you don't need to be rooted to install this, provided you have access to the proper equipment.
SOrry this is a duplication. I asked in another thread but was stepped on by VooDoos and such.
I have a stock rom. It USED to show as DI01. I did figure out how to root it, and just now noticed that it is showing as DH12 (baseband version AND build number), no longer DI01.
So, I need to update it first, before I can install DL30, correct?
I have a DL09.tar.tar file.
I have ODIN3.exe.
I have the DL30-leak.zip.
I have no clue what a CWM is or how to use/install it.
Where can I find the steps to get me to DL30?
Thanks.
worwig said:
SOrry this is a duplication. I asked in another thread but was stepped on by VooDoos and such.
I have a stock rom. It USED to show as DI01. I did figure out how to root it, and just now noticed that it is showing as DH12 (baseband version AND build number), no longer DI01.
So, I need to update it first, before I can install DL30, correct?
I have a DL09.tar.tar file.
I have ODIN3.exe.
I have the DL30-leak.zip.
I have no clue what a CWM is or how to use/install it.
Where can I find the steps to get me to DL30?
Thanks.
Click to expand...
Click to collapse
Waw. OK. If you are on a plain DH12 with no Clockwork Mod Recovery installed, then you need to do a lot of steps. I'm just going to give you a high level overview and not going into details. You find the details and make sure you understand.
1. Make sure you install USB drivers and that your computer can see your phone when plugged in.
2. Install ODIN in your computer
3. Use ODIN to flash the DL09.tar via PDA! (Very important!)
4. Once you are on DL09. Get the CWMRecovery_DJ05_DL09.tar from http://forum.xda-developers.com/showthread.php?t=913470 and flash with ODIN via PDA. (never on Phone)
5. Get also the update.zip from that thread and put it in the root of your SD card.
6. Then go to Market and get ROM Manager, then install Clockwork Recovery through ROM Manager.
7. Now to install DL30: (look here: http://forum.xda-developers.com/showthread.php?t=937499)
a. Get the "New" CWM .zip file and put it in your SD card.
b. Put the DL30.zip in your SDCard.
c. Boot into CW Recovery mode from ROM Manager, you should see the Green Clockwork Recovery mode.
d. Apply the new CWM .zip via "choose .zip from SD card"
e. Apply the DL30.zip same way.
f. Wipe data, cache and Devilk cache (in the Advanced menu).
g. Reboot.. and voila !
Lean how to use CWM first (how to navigate, etc).. Good luck!
neozen21 said:
I'm just going to give you a high level overview and not going into details. You find the details and make sure you understand.
Click to expand...
Click to collapse
Perfect. Yes, the details are out there for me to find, but not the high level like this.
Thanks.
READ READ than READ some more
hello everyone. i been a long time lurker of this site but never had the courage/motive to post. but i have an issue.
after much reading of how great rooting your phone can be. i too wanted to do it. so i looked n looked until i decided that id tryout CM7 cyanogen site
i believe i was able to unlock the bootloader/device. everytime i power up my phone regular start up starts with an unlocked lock at the bottom(like its supposed to right lol)
but here is as far as i get to go. i backed up my apps with astro file manager. then downloaded rom manager n as soon as i open it says "you must root your phone for ROM manager to function. superuser was not found at "/system/xbin/su". use goo search on ur computer to root your phone"
im stuck here because well im a noob and dont know why this is showing up. i was kinda hoping one of you guys could help me out here...
Taking straight from the wiki. Please read it before asking questions.
very generic explanation of steps needed to update a stock phone to custom ROM:
Download the ROM of your choice.
Copy the downloaded ROM image to the SD card
Root if you don't want to unlock bootloader (or just unlock bootloader).
Flash custom recovery image (if not done while rooting)
Turn off the phone
Turn on the phone while holding Volume Down
Select "BOOTLOADER" from the menu
Select "RECOVERY" from the menu
Select "Wipe"
Select "Wipe data / factory reset"
Select "Wipe Dalvik cache"
Return to main recovery menu
Select "Flash update.zip" or "Flash ZIP file"
Turn off verification, if such option is presented
Select your downloaded ROM image
Wait for the flash to finish successfully, if it didn't - do not continue!
Return to main recovery menu
Reboot the phone
You can follow a video walkthrough for this here: How to Flash a Custom ROM
To add to the post above, look at my signature and make sure you read and execute the relevant guide.
Just to clarify what the others are saying. You don't have root because you didn't root your phone.
You only unlocked the bootloader, which allows you to flash partitions through fastboot.
you havent rooted ,just unlocked bootloader
Echo?
Sent from my Nexus One using XDA Premium App
apollofroyo said:
you havent rooted ,just unlocked bootloader
Click to expand...
Click to collapse
yea i since realized that. ive now flashed 2.2.
but cant get the to root it yet
trying to figure things out.. maybe rooting wasnt such a good idea since i cant figure it out
rawskillz said:
yea i since realized that. ive now flashed 2.2.
but cant get the to root it yet
trying to figure things out.. maybe rooting wasnt such a good idea since i cant figure it out
Click to expand...
Click to collapse
since you have a unlocked bootloader you can do fastboot flash..
get amon ra recovery and do fastboot flash recovery recovery.img
after you do that it should say sending flashing and done with no errors
from then reboot into recovery and do a nandroid of rom then do wipe and wipe and flash selected rom you want.. cm7 plus gapps after reboot and you haverom..
nexus one is ez to gainroot if you unlockboot loadder.. if you dont then it gets more complicated..
rawskillz said:
yea i since realized that. ive now flashed 2.2.
but cant get the to root it yet
trying to figure things out.. maybe rooting wasnt such a good idea since i cant figure it out
Click to expand...
Click to collapse
wow thanks alot. it was way easier than i thought it would be. now going to backup my apps and flash cyanogen 7 . the problem is i had installed sdk b4 in wrong folder etc. will take future note. thanks to all
Greetings all.
I have a HTC Tattoo still running with the original Android 1.6 that came with the phone. I am trying to install the latest CM7.1.0.1 but have run to a few issues due to how old the Android version is.
I had some issues here, but I was able to install Universal AndRoot and Superuser. So, the phone is fully rooted at this point.
Since the phone is running Android 1.6, Rom Manager Free will not install, since the current version does not support this version of Android. Therefore, I am unable to install ClockworkMod Recovery in this way.
I tried finding older versions of Rom Manager that support Android 1.6, but when I tried installing them, the message I got was "com.koushikdutta.rommanager could not be installed on this phone". I could not get past this...
So, I tried the manual way through adb, using Cyanogen wiki. Through this way, I am only able to get up to the point I try gaining superuser rights using the "su" binary provided. At this point, I get the following error: "su: permission denied".
My question is: is there any other way I can flash ClockworkMod Recovery?
Thanks in advance.
Hi all,
I am stuck with the same problem.
I used the one-click-root app provided in this forum -> worked.
but due to android 1.6 am not allowed to install the rommanager app.
and with ADB I am stuck- -> getting same error as above: su permission denied.
I hope anyone can guide me though the installation of the clockwork recovery.
thx
-------------------------------------------------------------------------------------------
Update:
i think i am one step further now. i installed rommanager 3.0.1.7 (found in the internet), which installed the clockwork recovery.
when i go to "download rom" it says i need a newer version
i downloaded the rom manually, coppied to sd and selected in rommanager "install from sd"
system rebooted and showed my phone and a triangle (with power+home i come into a menu)
anyone can help me here to flash the rom?
Rommanager did not install clockworkmod, i think there was a su issue...
Did you try this instructions?
Goldcard creation: http://forum.xda-developers.com/showthread.php?t=603286
Rooting&installing clockworkmod 5: http://forum.xda-developers.com/showthread.php?t=950759
THX bro, you really saved me from a sleepless night
finally after 3 days of battling my tattoo I upgraded from 1.6 to 2.3.7!!!
your links made it! thx again bro
and nice work developers! thumps-up XD
So, finally you can download normal apps for android 2.1+, 2.2+ 2.3+
Hi again,
I finally have some time to try this again. But before I do anything, do I have to create the goldcard? Because the htc is already rooted, so I was thinking maybe I only need to perform the last part of it, which is installing ClockworkMod.
Thanks again!
No, you dont need to create goldcard again
Goldcard
Hello lemmymet,
You said I don't need to create the goldcard again. But I never created a goldcard... I have superuser through Universal Androot... unless this creates a goldcard automatically for you.
Regardless, the attempt to install only recovery failed. It gave an error saying it couldn't copy 'su' file, probably because there already is one.
Any other suggestions?
Thanks again.
ulaikamor said:
Hello lemmymet,
You said I don't need to create the goldcard again. But I never created a goldcard... I have superuser through Universal Androot... unless this creates a goldcard automatically for you.
Regardless, the attempt to install only recovery failed. It gave an error saying it couldn't copy 'su' file, probably because there already is one.
Any other suggestions?
Thanks again.
Click to expand...
Click to collapse
Hey.
you realy dont need o goldcard.just leave this step away.
here are some how to videos,i think they will help you out.
http://forum.xda-developers.com/showthread.php?t=705454
ulaikamor said:
Hello lemmymet,
You said I don't need to create the goldcard again. But I never created a goldcard... I have superuser through Universal Androot... unless this creates a goldcard automatically for you.
Regardless, the attempt to install only recovery failed. It gave an error saying it couldn't copy 'su' file, probably because there already is one.
Any other suggestions?
Thanks again.
Click to expand...
Click to collapse
Following post and the messages around it, should help you flash clockwork with universal androot
http://forum.xda-developers.com/showthread.php?p=18225026#post18225026
goldcard is needed only to overcome CID check
[CID - Carrier identifier, used in locking a phone to a specific carrier's SIM cards]
with goldcard you can flash unbranded RUU, so that you can get rid of mobile carrier specific junk (for example in my case orange junk).
and you dont need it for rooting and recovery flashing.
hey guys
Need some help for my Dell Streak 5
I tried installing custom rom but it gave error that signature not found
So then I installed Rom manager from ClockWorkMod
It asked for root
So then I installed Superuser
But some how it dosen't seem to work
Where am I getting it wrong?
I am completly noob in android now
What recovery are you using? Sounds like CWM. There's an option within CWM recovery to toggle signature verification. That should turn it off and let you install whatever ROM you want. Also, ROM manager is known to not work with the Streak. Not sure if that's changed with the latest versions of CWM for the Streak.
Sent from my Dell Streak using Tapatalk 2
Ruturaj001 said:
I am completly noob in android now
Click to expand...
Click to collapse
start reading:
http://forum.xda-developers.com/wiki/Dell_Streak_5/Flashing_Guide
hunderteins said:
start reading:
http://forum.xda-developers.com/wiki/Dell_Streak_5/Flashing_Guide
Click to expand...
Click to collapse
Thanks for suggestion
But I have problem using guide
Because I am trapped in loop
CWM wants me to be root and I can't be root
because when I try to flash Superuser.zip as update.zip
it's giving error signature not recognized
so without root I can't use cwm and without cwm I unable to root the phone
:crying:
You need to read and follow the advice given to you in this thread earlier by Edrill.
In Clockworkmod 6.0.1.2:
1. Select "Apply update from .zip file on SD card".
2. Select "toggle signature verification" and make sure the bottom of the screen says "Signature Check: Disabled".
3. Select Superuser.zip and flash it.
Your device, for whatever reason, has the signature check function enabled. As long as it is enabled you will not be able to install unsigned zips, like Superuser.zip apparently is. So disable it!
All my zips are signed and the signatures are valid.
His version is either modified or corrupt, he never stated where he got it from.
He also stated he's using rom manager, so there's likely other issues beyond that.
TheManii said:
All my zips are signed and the signatures are valid.
His version is either modified or corrupt, he never stated where he got it from.
He also stated he's using rom manager, so there's likely other issues beyond that.
Click to expand...
Click to collapse
the cwm most probably not from here... and using rom manager that was never meant for streak makes it even worse ... maybe he is on stock rom 2.2.x ...