Database Users

[q] driver problems?

I have updated everytime there was an update. I updated to the new rom 6.1.1 on 12/17/10. About a week later I tried to use the USB tether on my laptop and then on my desk top. I could not use it as the computer said the driver is not signed. Or code 10. I'm not a great PC user. How do I fix this or is there a fix for it? I use to use it on the previous rom 6.1.0 with out ever having a problem. I asked a question about this in a different thread and was basically ignored. Both of my computers use XP.

So nobody else has this problem? Or nobody can or wants to which is it cause I have done lots of searching and reading without finding any answer or clue. Thanks

So anyone else that uses USB tethering, please reply and let me know if yours works. If so is there a trick to it?

I've never had any issues. Try doing a full wipe (clear data/cache) and reinstalling the rom.
Sent from my Liberty using XDA App

No issues on Liberated 2.2 with tethering. But still you can use 3rd party apps, like PdaNET.

mattbollenbach said:
I've never had any issues. Try doing a full wipe (clear data/cache) and reinstalling the rom.
Click to expand...
Click to collapse
I've done this three times with no success. Both of my computers still giving the error. (Code 10) driver not digitally signed. I noticed one thing thou that after wiping everything and reinstalling one of the times it would not reboot all the way. Stayed on the Cyanogen mod symbol with the stuff going around it. Every time it tried to load it just bounced back to this screen.

barisahmet said:
No issues on Liberated 2.2 with tethering. But still you can use 3rd party apps, like PdaNET.
Click to expand...
Click to collapse
Just about to try PdaNet. In my phone info: Says Android 2.2.1, Kernel Version Is: [email protected] #69 Mod version CyanogenMod-6.1.1-Liberty.

PDA net works. I really wished though that I could use what was already installed on the phone. It worked all the time flawless in the previous ROM.

Just to make sure, don't have your phone plugged in when you are using recovery mode; for some reason if your phone is off and you plug it in via usb it enters an unreliable version of clockwork recovery. Instead choose boot into recovery from the power down options within the rom.
Sent from my Liberty using XDA App

Did you try uninstalling the driver from your computer?
Also, start > control panel > system > hardware > driver signing
what setting do you have currently for driver signing?

mattbollenbach said:
Just to make sure, don't have your phone plugged in when you are using recovery mode; for some reason if your phone is off and you plug it in via usb it enters an unreliable version of clockwork recovery. Instead choose boot into recovery from the power down options within the rom.
Sent from my Liberty using XDA App
Click to expand...
Click to collapse
No I dont have my phone plugged in when using recovery mode. Thats the way I always do it.
zervic said:
Did you try uninstalling the driver from your computer?
Also, start > control panel > system > hardware > driver signing
what setting do you have currently for driver signing?
Click to expand...
Click to collapse
My driver signing is set to ignore- Install the software anyway and dont ask for my approval. I dont really know how the settings in both computer would have changed. Unless when I installed a printer it automatically changed them. Cause besides the new ROM it is the only thing Ive changed. Also I have tried uninstalling and reinstalling and deleting the tether and downloading and reinstalling with the same every time.

On top of that now my phone is rebooting it self. Today while checking cl. it just flashed to the begining cyanogen screen. What's going on? What should I do Now?

I tried to reinstall the ROM again, cleared everything. I noticed while Wiping Dalvik Cache it just jumped back to the previous screen. It didnt show that it was wiping or anything. I reinstalled and apparently everything was not wiped because when my phone Rebooted. It took me through the setup screens like a new phone but when the screen poped up. My wallpaper was still there. Can someone help me? Im really getting sick of trying to get this to work now It seems as I have more problems now.

pcidiot said:
I tried to reinstall the ROM again, cleared everything. I noticed while Wiping Dalvik Cache it just jumped back to the previous screen. It didnt show that it was wiping or anything. I reinstalled and apparently everything was not wiped because when my phone Rebooted. It took me through the setup screens like a new phone but when the screen poped up. My wallpaper was still there. Can someone help me? Im really getting sick of trying to get this to work now It seems as I have more problems now.
Click to expand...
Click to collapse
Does the computer you're trying to use the tether on have wireless capabilities?

One of them does and the other does not. Both run xp though. Wiped again, wiping everything twice before flashing the ROM. I have not had any self reboot so far, and everything seems to be working ok. I have not got around to trying the usb tether yet though. Maybe a little later today.

Phone Lags after root and Greenify Problem

I just rooted my N910C and i noticed it lags? i try to install Greenify and also it lags sometimes it wont even ask for SuperSU access and i tried turning off the power saving and even if its off the icon on status bar is still there. another thing is that when i install greenify i can't un install it normally i tried on google store and the only option is Deactivate. i tried uninstalling it via "Drag icon and drag to the trash can icon" and it says that i need to disable the administrator access and i tried unchecking it but it lags. so what i did was uninstall it via titanium back up and it worked. but still my phone lags any suggestion?
another problem is that my computer does not detect my phone anymore? but when i plug it in it charges and the "windows notification sound" knowing that it detects a device being plugged but i cant see it on my computer so i cant access the Internal storage
update*
so i tried inserting my phone to another PC to make sure and the drivers installs but when installing the MTP device it fails
please i need help i know the root process triggered knox so warranty is already voided

Mine too.. I rooted my stock rom, noticed lag on almost everything, typing, browsing, opening apps, settings... no idea why...then i installed custom rom..!

pratik_193 said:
Mine too.. I rooted my stock rom, noticed lag on almost everything, typing, browsing, opening apps, settings... no idea why...then i installed custom rom..!
Click to expand...
Click to collapse
i tried paring a bluetooth from my Nvidia Shield and it even lags.. the notification with the Pin code is Soooooo delay so i cant pair properly example on my shield i tried to pair the Note 4 shield will show a pairing confirmation with pin code and on the tablet it wont until around 1minute
edit..
is it safe to just unroot the phone using SuperSU Full unroot method?

RollWii said:
i tried paring a bluetooth from my Nvidia Shield and it even lags.. the notification with the Pin code is Soooooo delay so i cant pair properly example on my shield i tried to pair the Note 4 shield will show a pairing confirmation with pin code and on the tablet it wont until around 1minute
edit..
is it safe to just unroot the phone using SuperSU Full unroot method?
Click to expand...
Click to collapse
flashing the stock rom via ODIN would be a better option.

pratik_193 said:
flashing the stock rom via ODIN would be a better option.
Click to expand...
Click to collapse
hmm how can i do that? is it easy and wont brick my device?

Open this link & follow the instructions. this is the easiest way
http://www.sammobile.com/firmwares/download/41621/N910CXXU1ANL1_N910CPVT1AOA1_PVT.zip/

any other way or site to get stock firmware? it requires membership =(

Go register, it's free

pratik_193 said:
Go register, it's free
Click to expand...
Click to collapse
hi i just did the process you gave me and i did not reformat/reset my device how ever my "Boot screen carrier" has change to something else i was using Globe. Philippines device and it was changed. Not that much of impact but can anyone suggest me how to change it back?
*I think the lag is gone now i tried turning on the powersaving and it turns on immediately unlike before

RollWii said:
hi i just did the process you gave me and i did not reformat/reset my device how ever my "Boot screen carrier" has change to something else i was using Globe. Philippines device and it was changed. Not that much of impact but can anyone suggest me how to change it back?
*I think the lag is gone now i tried turning on the powersaving and it turns on immediately unlike before
Click to expand...
Click to collapse
in that case, download the correct firmware from sammobile.com, i.e. according to your region / carrier.

Thanks everything is back to normal and lag was gone. but root was also gone im afraid to root again the lag might come back =(

RollWii said:
Thanks everything is back to normal and lag was gone. but root was also gone im afraid to root again the lag might come back =(
Click to expand...
Click to collapse
I don't know if your Note 4 version is the same with mine (Mine is N910H), mine is rooted + greenify but I experience a little to no lag.
Bluetooth pairing in an instant.
Apps open in an instant.
Buttons response in also quick.
Perhaps background process or some rogue apps do the lag?

d4rkkn16ht said:
I don't know if your Note 4 version is the same with mine (Mine is N910H), mine is rooted + greenify but I experience a little to no lag.
Bluetooth pairing in an instant.
Apps open in an instant.
Buttons response in also quick.
Perhaps background process or some rogue apps do the lag?
Click to expand...
Click to collapse
i just found out that the culprit was xposed framework everytime i install it my phone starts to lag mine was N910C

Gee really?

ryanalan82 said:
Gee really?
Click to expand...
Click to collapse
Yes iv'e tried slimming down to know the problem so what i did was
1) flash stock firmware (status ok)
2) root my device (status ok)
3) install greenify, six axis & some adblocker (status ok)
4) install xposed (status ok)
5) install xposed binaries and update (status phone lags)
6) uninstall xpoesed binaries amd updates (status ok)

Just do a search here; S-health app and Private mode interferes with xposed (or is it the other way around?) There are some settings you can change (disable secure storage in build.prop) that will get rid of the lag caused by xposed.

I concur that it is the exposed framework that is the culprit. It doesn't work well on samsung kitkat phones but only CM and AOSP. It will even ruin your private mode! So as for convinience I don't install it on Sammy phones

Xposed Troubles...

Hello there!
So I recently rooted my phone and added TWRP recovery too to my D295, and installed xposed framework... Updated the framework, and installed a bunch of modules.. Now the problem came up 3 days later and the phone started lagging a lot... Tried clearing ram and all but in vain. So I decided to reset it and try again... But again the same problem came up. is it just me or everyone is facing the same problem??

Why not try uninstalling some/all of these modules, reboot and see if the lag goes on ?

proudlytm said:
Why not try uninstalling some/all of these modules, reboot and see if the lag goes on ?
Click to expand...
Click to collapse
Obviously tried that

Debloat apps safe to Uninstall of Nougat.

I already tried to Uninstall few apps on stock Nougat, but after uninstalling like 5/6 apps, at first WiFi wouldn't turn on, i tried restarting phone to see if that would help but i have ran into bootloop.
Anyone has TWRP script that safely debloats phone, a script that someone tried and tested and that works properly without any problems?
Thank you guys!

Ragazzza said:
I already tried to Uninstall few apps on stock Nougat, but after uninstalling like 5/6 apps, at first WiFi wouldn't turn on, i tried restarting phone to see if that would help but i have ran into bootloop.
Anyone has TWRP script that safely debloats phone, a script that someone tried and tested and that works properly without any problems?
Thank you guys!
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-s8/samsung-galaxy-s8--s8-cross-device-development/zafer61-aqk7-max-debloater-aroma-t3714171

Stuck on 'Phone is starting' after updating to Android 12

Hello!
I tried to update my phone (SM-G975U) via Odin from Android 9 to Android 12, got the firmware from SamFw.com. Everything went fine until the phone rebooted, after unlocking the phone gets stuck on 'phone is starting'. I CAN access the Set Up Menu, Uninstall apps, move some settings here and there, connect to Wifi/Bluetooth, receive calls, install apps using ADB. Also, theres a notification all the time that reads 'Phone restarted Unlock your phone to get app notifications', I'm assuming that the phone thinks it is not unlocked and that's why it doesn't fully boot up.
Some things that I've already tried:
Intalling another Launcher (Pixel Launcher)
Reinstalling the firmware (ver G975USQU6IVC7) / Trying with different CSC with no results
Wiping Cache in Recovery Mode
Deleting/Adding Fingerprints
Changing from Lock Pattern to NIP to Password
I don't really want to do the full wipe, I would like to keep my data or be able to export the photos (Device not Recognized by Smart Switch also)
Is there anything else I can do?, has anyone been through the same issue?

Is your phone rooted?

Vatt`ghern said:
Is your phone rooted?
Click to expand...
Click to collapse
No, it's not rooted

Hi !
@DannOsnaya have you found a solution to the phone problem other than restoring to factory settings?
I have the same problem at the moment, almost identical to what you experienced.
If anyone has some advice on how to fix this problem, please share your advice.
My phone is not rooted.

Racer512 said:
Hi !
@DannOsnaya have you found a solution to the phone problem other than restoring to factory settings?
I have the same problem at the moment, almost identical to what you experienced.
If anyone has some advice on how to fix this problem, please share your advice.
My phone is not rooted.
Click to expand...
Click to collapse
Sadly, I have not
My phone is still like that, I tried updating to the newest security patch but didn't work either, haven't lost hope in avoiding factory reset tho

Hi. Did u find any solution to it. Am facing the same issue. Although I tried to factory reset but doesn't work.

DannOsnaya said:
Sadly, I have not
My phone is still like that, I tried updating to the newest security patch but didn't work either, haven't lost hope in avoiding factory reset tho
Click to expand...
Click to collapse
Any way to factory reset. I tried every possible way following YouTube but nothing works. It's just stuck. I've a backup of my data so not worried.

No, I still have the same issue.
Have you tried to install a launcher?

DannOsnaya said:
No, I still have the same issue.
Have you tried to install a launcher?
Click to expand...
Click to collapse
Nothing works. Now decided to show it to anyone. I guess the mobile shops have an option to erase everything. I don't understand how did it happen because it's usually with my toddler, he might have done something.

DannOsnaya said:
Hello!
I tried to update my phone (SM-G975U) via Odin from Android 9 to Android 12, got the firmware from SamFw.com. Everything went fine until the phone rebooted, after unlocking the phone gets stuck on 'phone is starting'. I CAN access the Set Up Menu, Uninstall apps, move some settings here and there, connect to Wifi/Bluetooth, receive calls, install apps using ADB. Also, theres a notification all the time that reads 'Phone restarted Unlock your phone to get app notifications', I'm assuming that the phone thinks it is not unlocked and that's why it doesn't fully boot up.
Some things that I've already tried:
Intalling another Launcher (Pixel Launcher)
Reinstalling the firmware (ver G975USQU6IVC7) / Trying with different CSC with no results
Wiping Cache in Recovery Mode
Deleting/Adding Fingerprints
Changing from Lock Pattern to NIP to Password
I don't really want to do the full wipe, I would like to keep my data or be able to export the photos (Device not Recognized by Smart Switch also)
Is there anything else I can do?, has anyone been through the same issue?
Click to expand...
Click to collapse
I followed a video and wiped out. Finally successful. I wasn't worried about data as Google has a backup.

I followed this method and finally it's factory reset.